Used Screwdrivers for sale (121)

Condition: new, maximum load weight: 73,540 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete inventory of vehicles, including units available immediately and at short notice, on our website. Overview of equipment. Full equipment list available on request. Neck (gooseneck): * Hydraulically liftable/lowerable and removable gooseneck, length approx. 3,650 mm * 2 pairs of fold-out lashing rings (LC 5,000 daN) * 2 pairs of lashing rings on the gooseneck (LC 10,600 daN) * 1 pair of lashing rings in the center section of the gooseneck (LC 10,600 daN) * For 6x4 or 8x4 2-axle tractor units Compact front bogie: * Hook pick-up front and rear, length: approx. 2,200 mm * Bogie width: approx. 2,850 mm Excavator deck: Telescopic excavator deck with drive-over deck hooks at the front and bolt-lug coupling at the rear * Basic width: approx. 2,850 mm * Length: approx. 6,650 mm * Beam height: approx. 400 mm * Beam width: approx. 1,350 mm * Loading height approx. 550 mm with ground clearance of approx. 150 mm 4-axle rear bogie: * Mechanical bolt-lug coupling at the front for mounting a lowbed * Rear crossmember bogie width: approx. 2,850 mm * Bogie length: approx. 5,480 mm Pendulum axles, all axles hydro-mechanically steered * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation Tyres: * Front bogie: * 8 x manufacturer’s choice (M+S) 285/70 R19.5 * Rear bogie tyres: * 16 x manufacturer’s choice (M+S) 285/70 R19.5 Kjdoxbmplspfx Aaljww * Load index 150/148J Paintwork: * Complete steel construction is automatically blasted with a blasting wheel system after welding. Second blasting with corundum for optimal adhesion of the coating system * Full chassis HRM-metallized with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final painting with two coats of 2K topcoat, single-color in RAL 3002 carmine red, according to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in ALU sidewalls and rear wall, approx. 400 mm high, anodized version, fitted on the gooseneck * 3.5 inch kingpin * Truck hydraulic connection with flow control (20 l/min) * Support gallows for supply lines, tractor unit tank must be at least 80 l * with MAX Trailer couplings, otherwise customer to supply coupling parts ex works * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Tool kit Art No. 612452 * Multi-coupling hydraulic connections on the gooseneck * Front bogie with separate air connection for air screwdriver * BEKA-MAX central lubrication for one 2-axle bogie with standard grease NLGI-2 * One 7-pin socket left and right rear on the front bogie for warning signs * Screw-in facility (ø approx. 40 mm) every approx. 500 mm on the outside of the upper flange of the outer tube of the excavator deck for bolt-on rings (LC 16,000 daN) * Foldable width extensions with steel covers, adjustable in width from approx. 2,850 mm to approx. 3,250 mm * BEKA-MAX central lubrication for one 4-axle bogie with standard grease NLGI-2 * At the rear bogie, a socket for the cable remote control of the steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted left and right on the gooseneck * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery * Radio remote control: * Operation of the powerpack, start/stop of the diesel engine * Control of the steering, in addition to the cable remote control * One LED work light each left and right at the end plate of the gooseneck with...

Condition: used, Year of construction: 2000, Pneumatic clamps to immobilize chairs while the operator performs operations, for example via screwdriver or similar Working dimensions: cm. 50x60 Kwodpfoydb Hxjx Aalow

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type SRC-B200-2R Year of manufacture: approx. 2000 Pot diameter top: 300 mm Bowl diameter bottom: 180 mm Inner height of bowl: approx. 45 mm Sorting track width: approx. 5 mm Total height (drive + bowl with sorting track): 260 mm Mains connection: 230 Volt, 50 Hz. - Control unit RNA, type ESG 90 for adjustable vibration speed - The conveyor was used to feed automotive fuses Kwodeu Ailgspfx Aaljw Space requirement Ø x H: 300 x 260 mm Weight: 14 kg good condition A bowl feeder always consists of two main components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Condition: used, Linear feeder / Vibratory feeder / Sorting device Vibratory linear feeder, vibratory hopper, dosing hopper, storage hopper Vibratory bowl feeder, bowl feeder Vibratory bowl, screw feeding system with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Year of manufacture: approx. 2000 Useful load: approx. 1.5 kg Oscillation frequency: 100 Hz / 6000 rpm Kwedpfx Aajxf Urvjlew Mains connection: 220 Volt, 50 Hz - Oscillating plate L x W = 170 x 60 x 12 mm - Mounted track length 340 mm - Overall height with base plate and oscillating plate approx. 115 mm Required space L x W x H: 400 x 280 x 400 mm Weight: 9 kg Good condition

Condition: used, Vibratory Bowl Feeder / Sorting Unit / Spiral Feeder / Vibratory Conveyor RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving applications Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-N 250-2L Serial No.: Year of manufacture: approx. 2000 Bowl diameter (bottom): 300 mm Bowl diameter (top): 350 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Kwjdpfoux Shvox Aalew Oscillation frequency: 100 Hz / 6000 rpm Power supply: 230 V, 50 Hz - RNA control unit, type ESG 90, for adjustable vibration speed - The feeder was used for feeding automotive blade fuses Space requirement Ø x H: 420 x 390 mm Weight: 52 kg In good condition A bowl feeder always consists of two main components. 1) Sorting bowl, which aligns the parts 2) Drive unit, which generates vibrations in the bowl via mechanical oscillation and thereby moves the parts.

Condition: new, empty load weight: 560 kg, maximum load weight: 2,040 kg, overall weight: 2,600 kg, loading space length: 2,760 mm, loading space width: 1,500 mm, loading space height: 300 mm, tire size: 165r13, Product information "UNSINN WEB-HK2715-26-13 2600kg 276x150x30cm rear tipper with PUMPless" Rear tipper from the manufacturer Unsinn. Made in Germany! The WEB-HK2715-26-13 high-loader rear tipper can be easily loaded from the side and rear with a forklift or by hand thanks to the foldable and removable aluminum side walls. The load is tipped back out using manual hydraulics. A welded subframe makes the tipping trailer very stable. Kjdpfxeqv Ec Hj Aaloww The car trailer is equipped with foldable and removable side walls, a solid steel floor, PUMPless hydraulics for cordless screwdrivers, an automatic support wheel, lashing eyes, a welded, hot-dip galvanized frame, and a very stable V-drawbar. Trailer accessories such as a leaf grid attachment, side wall attachment, tarpaulin and frame, tarpaulin, net and supports are also available for an additional charge.

Condition: new, empty load weight: 390 kg, maximum load weight: 910 kg, overall weight: 1,300 kg, loading space length: 2,300 mm, loading space width: 1,500 mm, loading space height: 300 mm, Product information "UNSINN WEB-HK2315-13-10 1300kg 230x150x30cm rear tipper with PUMPless" Rear tipper from trailer manufacturer Unsinn. Made in Germany! The WEBHK2315-13-10 single-axle high-loader is a rear tipper. Easy to load thanks to its foldable and removable aluminum side walls. The load can then be tipped manually using the hydraulic system. A welded base frame makes the tipping trailer very stable. This car trailer is equipped with foldable and removable side walls, a solid steel floor, PUMPless hydraulics for cordless screwdrivers, a support wheel, lashing eyes, a welded, hot-dip galvanized steel frame, and a sturdy V-drawbar. Accessories such as a leaf grid attachment, side wall attachment, tarpaulin and frame, tarpaulin, load securing net and supports are also available for an additional charge. Kwsdsq Rvcqjpfx Aalew

Condition: used, Year of construction: 2018, 0 ja Working width 3000 mm 0 nein Eder + Mueller fitting centre for windows ----- Sale on behalf of the customer from the customer's location. The machine was in use until closing and is now at the customer's warehouse. Previous hardware: Maco Multi Matic (other hardware is also possible) Technical manufacturer's description: ----- Table height and working angle mechanically adjustable with permanently mounted hardware bearing Sash stop table, length 3,000 mm, with fixed hardware bearing Felt-bonded support 12 pivoting counterholders for hanging the sashes Hardware detection for centered and constant gear position 1 storage unit with 4-way air connection with automatic special screwdriver with pneumatic depth stop 6-way turret stop for different screw depths Pneumatic height adjustment for 6 screw levels Automatic screw feed Manual insertion for a second screw length Dimensions: Length approx. 3,500 mm, depth approx. 2,200 mm, height approx. 2,100 mm Ksdpfoxmamusx Aaleww ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: used, Dimensions (L,W) , mm Weight ca. 90 kg adjustable height (yes/no) ja stroke 300 - 800 mm surface of working table 1.700 x 1.500 mm table width max. 3.800 mm 0 ca. 130 kg Ruchser RU-4-SSP rotary-tilt table ----- Support surface 1700 x 1500 mm, maximum Table width swung out 3800 mm, pneumatically tiltable, weatherproof recess, with 6 storage boxes, each with 2 compartments, pull-outs below for widening, with 2 support feet and 2 flat clamping cylinders, Lifting device from 300 - 800 mm, Roller conveyor as a surface, foldable. Payload capacity 130kg. Driving device with 4 swivel castors Stop device (RU-4SSP) 2 stops for final inspection and To seal Wing assembly device with tool tray and adjustable stop for Inclination for RU-4-SSP Holder for drill, screwdriver gun etc. with screwdriver quiver Kjdpfxjvu Hfde Aaljww Driving device with flanged rollers RU-DKFA and RU-4SSP 3 double meter rail for Driving device 25 x 10 mm ----- Price of the above machine on request! plus packaging and shipping ----- (technical data according to manufacturer - no guarantee!)

Condition: new, Manual hand unit Nein J/N Automatic for single pieces Ja J/N Automatic for frames Nein J/N Clip set "351" on the loose item ----- Manufacturer description: - Base frame in stable welded construction - Clip container as tipping conveyor with separation and feeding the clips - Screwdriver with tipping conveyor for the screws to be separated, feed screwdriver pneumatic with depth adjustment - Conveyor belt length approx. 4,000 mm as NC axis - Contact and clamping cylinder - Electro-pneumatic control via PLC It can programs with different Initial and distance dimensions can be entered - Workflow automatically in flow ----- Technical specifications: - Screw height 50-120 mm - Profile length 350-3,500 mm - Table height approx. 950 mm ----- Total price of the machine ex works: on request! Freight costs within Germany: on request ! Installation, commissioning and instruction Kjdskx Stnspfx Aaleww within Germany: on request ! ----- Video shows version with extra infeed belt and outfeed belt with pusher. Not included in the basic price. Can be offered as an option if required. (technical data according to the manufacturer without guarantee!)

Condition: excellent (used), Year of construction: 2021, Manufacturer: Emerson Macchine Torino Model: Carrera 700 Year of manufacture: 2021 Specification: Table size: 1,320 x 320 mm • X - Y travel: 1,000 x 290 mm • Z table travel: 400 mm • Spindle-to-table distance: 140 - 540 mm • Spindle-to-column distance: 200 - 550 mm Kwjdpfxow Ew Dwo Aaljw • Spindle stroke: 120 mm • Spindle taper: ISO 40 • Drilling capacity: 30 mm • Tapping capacity: M16 • Vertical spindle speed: 90 - 2,000 rpm • Horizontal spindle speed: 40 - 1,350 rpm • Horizontal/vertical motor power: 2.2 / 1.5 kW • Dimensions: 1,920 x 1,850 x 2,200 mm • Weight: 1,900 kg Standard equipment: • Automatic tool screwdriver • Gearbox • Horizontal spindle • Automatic feed on axes • Automatic quill feed • Cooling unit • Lamp Main features: • Three-axis digital readout (Z with head movement) • Tapping attachment (reverse unit) • Table guard Accessories: Documentation Tool Please submit inquiries by email only. All information provided to the best of our knowledge. Subject to error. This offer is directed exclusively to businesses within the meaning of § 14 BGB. Sale is made excluding any warranty. This exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duty by the seller, or for injury to life, body, or health. For further information, please refer to the Witzenmann GmbH website under the keywords "Impressum", "AGB" and "Datenschutz".

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 1151209, functionality: fully functional, operating hours: 4,800 h, For sale due to discontinuation of production, a PVC window and door machining center. The following operations are performed: Fixing reinforcements using an automatic screwdriver and screw feeder, various drilling operations such as for hinges, handles, hardware fastening points, and drainage holes. Upgraded in 2022 with a new Windows 10 PC and settings – maintenance performed by a Soenen technician at our premises. Maico and Vorne hardware (with drilling block replacement), Salamander-programmed PVC profiles. Kedpfex Rcwajx Aaleww

Year of construction: 2017, condition: as good as new (ex-display), machine/vehicle number: 6151550180, Demonstration tool: hydraulic high torque wrench LP2 from TITAN without link Torque range: 363 to 2476 Nm Downforce: suitable for screwdrivers (wrench size SW 19 to SW 60) Links are optional and not included Weight: depending on the cassette from 2.56 to 3.16 kg Total length with cassette: 226.1 mm Total height: 31.8 mm Advantages: -Patent Multi Axen connection: Freely movable hose, multi-positioning of the hose -Flat design: Fits easily on all tight spots - Unique broad-gauge teeth -Modular concept Characteristics: -Certified accuracy +/- 3% Kjdpfjdv Scfox Aaljww -The Titan WIDE Track ratchet-tooth design distributes the force evenly, it provides a larger contact surface and thus brings the power to solve the-bolt case perfectly - every time - Handcrafted from the highest quality aviation materials for ultimate strength and durability (AQ Grade 7075-T6 Alloy) - Low profile and flat design for extremely tight spaces

Year of construction: 2006, condition: good (used), 1087/5000 Complete Desoutter screwdriver system consisting of: 2 x Transducer controlled angle screw spindles Desoutter EML51-20J Art.Nr .: 6151650640 Torque range: 30 to 135 Nm Output: 1/2 " Number of revolutions. 403 min-1 Length: 166 mm Diameter: 51.2 mm 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Possible screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Ksdpsdcmdlefx Aalsww Electricity compatibility 1 x motor cable 5 m length Art.Nr .: 6159171120 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Year of construction: 2016, operating hours: 10 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 09/2016 Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Kjdpevtf Arsfx Aaleww Serial RS232 interface Ethernet interface

Year of construction: 2010, operating hours: 75 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 08/2010 Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface Kwodpfx Aaovxux Hjlow

Year of construction: 2011, condition: new, functionality: fully functional, machine/vehicle number: 2051474764, From our demonstration tool inventory, tested and fully functional: new Desoutter SH1200-LR215-S90-A13S pneumatic angle screwdriver with shut-off clutch with lever start Kwsdpfx Aasv In Dbolow Output: 1/2" square Torque: 70 to 120 Nm / 354 - 1062 in.lb Idle speed: 215 min-1 Length: 590 mm Head height (housing to square): 69.5 mm Weight: 3.5 kg Other tools for industrial production and maintenance on request.

Condition: new, Year of construction: 2025, Workshop workstation with adjustable worktop height – Workbench PowerLift Concept M We offer a professional workshop workstation – PowerLift Concept M. A robust, height-adjustable table designed to meet the needs of demanding users. Kodpfx Aaeww Axqjlsww Key product features: Adjustable worktop height: Reliable mechanical height adjustment allows you to set the working height to individual requirements, ensuring ergonomic and comfortable working conditions. Solid construction: Made of top-quality materials, guarantees stability even under uneven load distribution. Load capacity up to 500 kg: Designed to handle heavy tools and materials, ideal for intensive use. Mobility: Extendable castors allow for easy movement of the workstation within the workshop, without compromising stability during operation. Lighting: Equipped with a professional lamp featuring adjustable light intensity, controlled locally by a dial or through a building management system. Standard configuration includes DALI system lighting. Electrical panel: Standard features include an emergency stop button, three 230V sockets, and a light intensity controller, enhancing both functionality and work safety. An additional fourth socket is located beneath the worktop. Tool board: Perforated panel enables convenient tool organization, helping to keep the workstation tidy. Why choose PowerLift Concept M? As a renowned manufacturer of workshop tables, Karnatech offers a product that is 100% made in Poland, characterized by outstanding quality and attention to detail. The PowerLift Concept is an investment in a durable and functional workstation that will meet the expectations of even the most demanding professionals. Height adjustment range: approx. 760–1130 mm Height adjustment of both the worktop and tool board is carried out mechanically using the included folding crank or any standard power screwdriver. Contact and additional information: Power Lift Concept M is one of several models in our range of workbenches. For more information, please visit the Karnatech website. We invite you to contact us by email or phone for detailed information and to place an order. We also offer the option to build a workstation tailored to your individual requirements.

Condition: new, functionality: fully functional, Year of construction: 2025, Workshop workstation with adjustable worktop height – Workbench PowerLift and Workbench Standard tables. A robust height-adjustable workbench provides the ideal solution for demanding users. Adjustable worktop height: A mechanical and reliable height adjustment system allows the workstation to be tailored to individual requirements, ensuring ergonomic comfort and convenience. Worktop adjustment range: approx. 760-1130 mm Height adjustment for both the worktop and the tool pegboard is mechanical, operated with the supplied folding hand crank or any power screwdriver. Rugged construction: Manufactured from premium quality materials, ensuring stability even with uneven loads. Load capacity up to 500 kg: The table is engineered to handle heavy tools and materials, making it ideal for intensive professional use. Mobility: Retractable castors provide easy maneuverability around the workshop without compromising on workstation stability during use. Lighting: Equipped with a professional lamp with adjustable light intensity, controlled either locally via a rotary knob or through a building management system. As standard, the table is fitted with DALI lighting system. Electrical panel: Standard equipment includes an emergency stop button, three 230V sockets and a lighting intensity controller for enhanced functionality and workplace safety. An additional fourth socket is fitted under the worktop. Tool panel: The perforated pegboard allows for convenient tool organization, helping keep your workspace tidy. As a renowned manufacturer of workshop tables, Karnatech offers a 100% Polish-made product, distinguished by the highest quality craftsmanship and attention to detail. PowerLift is an investment in a durable and functional workstation that will meet the expectations of even the most demanding professionals. Kjdpfxoww Atuj Aaleww We also offer more budget-friendly workstations without electric height adjustment, available in various versions. Workstations designed and manufactured in the EU.

Condition: new, The object of this sale is a heavy-duty tool cart from STAHLGRUPPE with equipment. It has: - 390 tools, - 11 drawers of which 9 filled, Ksdpfx Aeuabxqsaloww - solid wooden top, - 2 swivel wheels with double locking, - double ball bearing rails for wide drawers, - central locking system, - maximum load capacity of 800 kg. Dimensions: l. 1300mm / w. 520mm / h. 1110mm Weight: 201kg In addition, it has: 4 swivel casters, set of ratchets and sockets up to size 350 386 pieces, chrome vanadium tools, 29-piece wrench set (60mm-50mm), 3 sets of ratchet wrenches with sockets and bits, 11-piece set of ring wrenches, 12-piece adjustable wrench, set of pliers, 2 hammers and 4 torches, pointed pitch and chisel set, 12 screwdrivers, allen wrenches, Trox wrenches, precision tools, 21-piece set of T-wrenches, 34-piece set of impact sockets + Trox and allen sockets, ratchet wrench, LED light, saw, scissors, knife, measuring tools and more.

Year of construction: 2025, condition: new, functionality: fully functional, table height adjustment: 300 mm, Equipment: USB port, Workshop workstation with adjustable worktop height – Workbench PowerLift and Workbench Standard tables. Kjdpfx Aewn Da Dealjww A solid adjustable table with the possibility of adjusting the worktop height is an ideal solution for demanding users. Adjustable worktop height: mechanical, reliable height change allows you to adjust the work station to individual needs, ensuring ergonomics and work comfort. Worktop adjustable in the range of approx.: 760-1130 [mm] The height of the worktop and tool board is adjusted mechanically using the included folding crank or any screwdriver. Solid construction: Made of the highest quality materials, it guarantees stability even with uneven load. Load capacity up to 500 kg: The table is designed for working with heavy tools and materials, ideal for intensive use. Mobility: Extendable wheels allow easy movement of the work station in the workshop, without compromising stability during work. Lighting: Equipped with a professional lamp with adjustable light intensity, adjusted locally using a knob or through the building management system. As standard, the table is equipped with lighting in the Dali system. Electrical panel: standard emergency button, three 230V sockets and a lighting intensity controller, which increases functionality and work safety. An additional fourth socket is located under the table top. Tool board: Perforated board allows convenient organization of tools, helping to maintain order at the workstation. As a renowned manufacturer of workbenches, Karnatech offers a 100% Polish product, characterized by the highest quality of workmanship and attention to detail. PowerLift is an investment in a durable and functional workstation that will meet the expectations of even the most demanding professionals. We also have more budget workstations without the possibility of lifting the worktop in various versions. Workstations designed and manufactured in the EU.