Used Screw Compressor for sale (7,478)

Condition: new, performance: 984 l/min main engine power: 7.5 kW tank capacity: 500 l maximum operating pressure: 10.0 atm Kdedpfx Ajzx Sr Hskpou integrated refrigerant dryer electronic adjustment of compressor operating parameters soundproofed cabin (only 67 dB) complies with CE standards manufactured in 2025, NEW

Condition: excellent (used), Year of construction: 2015, operating hours: 65,031 h, functionality: fully functional, volume flow: 1,012 m³/h, pressure (max.): 7.5 bar, type of cooling: air, Equipment: type plate available, Screw compressor Atlas Copco GA90 90 kW 7.5 bar 16.87 m3/min Kdodpfx Akey A Nwkjpeu Year of manufacture: 2015 Operating hours: 65,031

Condition: excellent (used), Year of construction: 2023, volume flow: 1.06 m³/h, operating pressure: 10 bar, pressure (min.): 10 bar, pressure: 10 bar, SCC SMART 7 screw compressor 7.5 kW motor Capacity: 1.06 m³/min Pressure: 10 bar Year of manufacture: 2023 Kodpfx Akjz N Ah Espjdu Operating hours: 902 Compressor has been serviced, with filters and oil changed.

Condition: excellent (used), Year of construction: 1997, PROD. KAESER TYPE CS91 S/N 7601345 YEAR 1997 POWER (kW) 55 CAPACITY (m3/min) 9.55 PRESSURE (bar) 7.5 Kodpfx Aksz D Ud Hopjdu HOURS (RUNNING/TOTAL) 14215 / 71583 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON-BOARD TANK no DOCUMENTS no NEW/USED USED

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, Only 2 units available! Aerzen VM 30 screw compressor Used to pneumatically unload railway cars. Manufacturer: Aerzen Type: VM 30 Volumetric flow rate: 27.17 m³/min (1630.2 m³/h) Pressure increase: 2.75 bar Compressor speed: 12874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C Cooling of the compressed air is done with water via a shell and tube heat exchanger. Year of manufacture: 1998 Kedjrkpp Hopfx Akpsdu Dimensions: Length: 2800 mm Width: 1150 mm Height: 1770 mm Weight: approximately 2750 kg Operating hours: Compressor 1: 28109 hours Compressor 4: 28973 hours Regular service was performed by a specialized service company! Not operated since 2019. Have been stored in a dry and heated location since then.

Condition: excellent (used), Year of construction: 2018, S016947 PROD. ALUP Kjdpfx Ajz E Rpbekpedu TYPE ALLEGRO26 CE S/N ITJ210759 YEAR 2018 POWER (kW) 26 CAPACITY (m3/min) 0.77-4.73 at 7 bar PRESSURE (bar) 7-13 HOURS (RUNNING/TOTAL) 47881 FREQUENCY CONVERTER yes BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no CONNECTION 1" NEW/USED used DOCUMENTATION no

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, DIESEL ATLAS COPCO XAS 88 compressor with an aftercooler (dryer), fully serviced. Compressor complete with documentation for registration in Poland. Technical data: flow rate: 5.20 m3/min; operating pressure: 7 Bar; year of manufacture: 2019; weight: 750 kg; engine: KUBOTA; compressor in fully working condition. net price: PLN 57,500 Ksdpfxez Rxcze Akpedu gross price: PLN 70,725 Below is a link to a video showing the machine in operation.

Condition: new, performance: 780 l/min main engine power: 5.5 kW tank capacity: 500 l maximum operating pressure: 10.0 atm integrated refrigerant dryer Kdsdszpxv Topfx Akpju electronic adjustment of compressor operating parameters complies with CE standards year of manufacture: 2025, NEW

Condition: as good as new (ex-display), Year of construction: 2026, Exhibition Piece: FirstAir Variable 15 kW Screw Compressor FASM 15 Type: FASM 15 Year of Manufacture: 2026 Operating Hours: 0 hrs Technical Specifications Max. Operating Pressure: 13 bar(g) Free Air Delivery (FAD): at 5 bar: 1.14 to 2.86 m³/min at 7 bar: 1.02 to 2.55 m³/min at 8 bar: 0.96 to 2.40 m³/min at 10 bar: 0.82 to 2.05 m³/min at 12 bar: 0.74 to 1.85 m³/min at 13 bar: 0.69 to 1.72 m³/min Installed Motor Power: 15 kW Operating Voltage: 380V/400V/415V ~ 50 Hz Sound Pressure Level (EN ISO 2151): 71 dB(A) Compressed Air Connection: G 3/4" Dimensions (L x W x H): 680 mm x 680 mm x 1240 mm Weight: 270 kg Sales Information: Kdodpfxez D Etle Akpsu Convenient leasing options via our house bank are available for new machines. Visit our showroom / retail store. We always keep a large selection of new and used compressors in stock!

Condition: like new (used), Year of manufacture: 2023 Type: SMART 7 Serial number: 202210301 Operating hours: 1,160 h Load hours: 452 h Pressure: 7.5 bar Flow rate: 1,060 l/min Connection: 7.5 kW Pressure vessel Kdedpfxezwxp Aj Akpou Pressure: 13.8 bar Temperature: 0 to 150°C Condition: as new Weight: 240 kg Dimensions: 900 x 600 x 1,040 mm

Condition: good (used), Year of construction: 2010, This is your *KAESER SK 25 compressor + 500L tank + TBH 23 dryer*. - *KAESER SK 25 - SIGMA screw compressor* - *Part No. 101958.0 / Serial 1562* - *Hour meter:* - Photo 1: *20,704 total hours* - This is low for a KAESER; they typically run for 60,000 hours. - Photo 2: *5,224 hours under load* (1) - This represents the core operating time of the machine. - Photo 3: *314 hours* - Hours under pressure (2). Ksdpfx Akoz Ab A Ajpodu - *Displayed pressure 0.0 bar = normal shutdown, no fault.* - *Complete set:* - SK25 compressor (15 kW - approximately 2 m³/min at 8 bar) - Vertical tank X. PAUCHARD 500L galvanized (with pressure gauge) - KAESER TBH 23 KRYOSEC refrigeration dryer.

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers Kodpfx Akozu Aibspedu - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: good (used), Year of construction: 2002, PROD. KAESER TYPE BSD62 Kdodpfxjz D Hmtj Akpju S/N 1762 YEAR 2002 POWER (kW) 30 CAPACITY (m3/min) 5.46 PRESSURE (bar) 8.5 HOURS (RUNNING/TOTAL) 34290/50705 VARIABLE SPEED DRIVE no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: excellent (used), Year of construction: 2000, S015037 PROD. Ingersoll Rand TYPE MH37 GD S/N 2272812 YEAR 2000 POWER (kW) 43 PRESSURE (bar) 10 CAPACITY (m3/min) HOURS (RUNNING/TOTAL) 9080/37508 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED (AIR/WATER) AIR TANK no CONNECTION 1 1/2" G112 DOCUMENTS NEW/USED used Kdjdjz Hmddjpfx Akpeu

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, total length: 1,800 mm, total width: 800 mm, total height: 1,700 mm, Frequency-controlled 15 kW 4-in-1 screw compressor Kedpfx Akev Uqlzopedu With compressed air treatment for laser applications Attached refrigeration dryer Integrated 4-way fine filter for clean, oil-free compressed air supply Working pressure -1.6 MPa (approx. 16 bar) Delivery rate 1.3 m³/min at 1.6 MPa Integrated pressure vessel approx. 330 l

Condition: excellent (used), Year of construction: 2010, PROD. KAESER TYPE CSD102 S/N 1379 YEAR 2010 POWER (kW) 55 CAPACITY (m3/min) 8.75 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 13407/28537 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON-BOARD TANK no Kjdpsz Dhd Hjfx Akpsdu DOCUMENTS no CONNECTIONS 2 NEW/USED USED

Condition: good (used), Year of construction: 2002, functionality: fully functional, overall weight: 700 kg, The 30 kW screw compressor has been disassembled and is ready for shipment. Kdedpfxezb Dq Ie Akpeu

Condition: good (used), Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage Kdodpjztx Ansfx Akpsu -Manufacturer: Atlas Copco, screw block compressor stage from compressor type GA 408 Pack -Screw block: Type GA 408 -Final pressure: max. 8 bar -Shaft: Ø 40 x 55 mm -Dimensions: 760/490/H500 mm -Weight: 160 kg

Condition: used, Year of construction: 2021, Technical details: feed pressure: 10 bar total power requirement: 7,5 kW volume capacity: 1,1 m³/min. Number of working hours: 0 h revolutions per minute of the motor:: 3000 U/min. voltage: 400 V / Hz rated capacity: 7,5 KW Ksdpfx Akou Nz D Uopedu machine weight approx.: 438 kg dimensions L x W x H: 1,0 x 0,55 x 0,85 m SCREW COMPRESSOR WITH ELECTRIC DRIVE with integrated pressure tank - type ADST 8; 6 liters capacity; size Ø 160 x 400mm with integrated dryer operation at the control panel on the unit air filter at the front i.D. *

Condition: excellent (used), Year of construction: 2011, operating hours: 53,132 h, functionality: fully functional, power: 132 kW (179.47 HP), volume flow: 1,596 m³/h, pressure (max.): 8.5 bar, type of cooling: air, Screw compressor GA132VSD Atlas Copco Integrated frequency converter 132 kW 8.5 bar Ksdpfx Akjx Rwz Tspjdu 26.06 m³/min

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: A34904774, overall weight: 1,765 kg, Equipment: type plate available, Technical details: Voltage: 400 V Phase: 3 Frequency: 50 Hz Air flow rate: 12.44 m3/min Speed: 3000 min-1 Intake pressure: 1 bar Kjdpfxjwtfk Uj Akpsdu Installed motor power: 75 kW Compression medium: air Stage pressure: 10 bar g Full load current: 169 A The CompAir L75-10 A screw compressor is an efficient and reliable solution for compressed air supply in industrial applications. Thanks to its modern technology, it operates energy-efficiently and ensures stable compressed air performance. The compressor is equipped with integrated heat recovery, allowing the useful utilization of the waste heat and further reducing energy consumption.

Condition: excellent (used), Year of construction: 1998, S015278 PRODUCER: KAESER TYPE: AS44 SERIAL NO.: 1010 YEAR: 1998 POWER (kW): 30 CAPACITY (m3/min): 4.35 PRESSURE (bar): 7.5 HOURS (RUNNING/TOTAL): 83296 FREQUENCY CONVERTER: no BUILT-IN DRYER: no Kdsdpfx Aksz Dul Rjpeu HEAT EXCHANGER: no COOLED BY (AIR/WATER): air ON TANK: no DOCUMENTS: no CONNECTION: 1 NEW/USED: USED

Condition: good (used), Year of construction: 1997, functionality: fully functional, OIL-FREE AIR COMPRESSOR Designed to supply oil-free compressed air for low-pressure industrial applications. TECHNICAL DATA Maximum working pressure: 3.5 bar(g) Typical operating pressure: 3.2 bar Input power: 168 / 187 kW Shaft speed: 2,220 / 3,570 rpm Approximate dimensions (L × W × H): 3,000 × 1,600 × 2,000 mm Approximate weight: 4,000 kg Serial number: AIF042384 Kodpfx Aozvllnekpedu

Condition: excellent (used), Year of construction: 2008, S016807 PROD. KAESER TYPE CSD122 SFC S/N 1124 YEAR 2008 POWER (kW) 75 CAPACITY (m3/min) 2.20 - 10.50 PRESSURE (bar) 8.5 Kdjdpfoz D Em Ejx Akpsu HOURS (RUNNING/TOTAL) 74045/99534 FREQUENCY CONVERTER yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTIONS 2 NEW/USED USED

Condition: good (used), Year of construction: 2004, functionality: fully functional, Screw Compressor by Boge Boge screw compressor, model S220. This compact, high-performance unit provides a reliable supply of continuous compressed air for industrial applications. It is excellently suited for production lines, assembly operations, pneumatics and control systems, as well as for larger machine fleets requiring stable air pressure. The design is characterized by durability, ease of maintenance, and efficient power delivery, contributing to reduced operating costs. Kdsdow Rd Avspfx Akpju Technical specifications: Type: S220 Operating hours: 54,947 h Pressure: 8 bar Free air delivery: 27.9 m3/min Motor speed: 1,500 rpm Power: 160 kW Next maintenance: in 1,000 h.