Used Screw Compressor System for sale (43,993)

Condition: repair required (used), Year of construction: 2015, machine/vehicle number: 1464, Offer 26166 - Screw compressor with defective drive motor Manufacturer: KAESER, Type: SK 22 Machine No.: 1464, Year of manufacture: 2015 - SIGMA Control - Operating hours approx. 15,933 h - Load hours approx. 7,654 h - Operating pressure 11 bar - Delivery rate 1.67 m³/min - Drive 400 V / 11 kW - Space requirement approx. W 780 x H 1030 x D 850 mm - Weight approx. 300 kg - Compressed air tank Manufacturer: OKS, Type: 500L Machine No.: 462811, Year of manufacture: 1998 - Tank volume 500 L - Compressed air dryer Manufacturer: JÄGER, Type: ERD 150 Machine No.: 1268, Year of manufacture: 2011 - Refrigerant R134 A - Cooling air volume 150 m³/h Bdsdpfjzg Uh Tsx Aa Ioh - Oil-water separator

Condition: like new (used), Kaeser M30 PE screw compressor on a trailer Bedjzz Hiljpfx Aa Isdh The unit is in perfect condition, like new. The unit was purchased from a warehouse and has never been used. Only 50 hours of operation. Technical specifications: Operating pressure: 7 bar 18.2 kW motor Automatic start Capacity: 3 m3/min Weight: 595 kg Year of manufacture: 2022/12

Condition: used, Year of construction: 2003, functionality: unexamined, machine/vehicle number: AII 298286, overall weight: 585 kg, Speed-controlled screw compressor, Atlas Copco GA 30 VSD FF, with integrated refrigeration dryer, year of manufacture 2003. Serial No. AII 298286, rated power 30 kW, weight 585 kg. Maximum operating pressure 12.75 bar, maximum delivery rate 75 l/s (4.5 m³/min). Control system: Atlas Copco Elektronikon II. Location: Homburg (Saar), Germany. Inspection by appointment only. Price upon request, net plus VAT, ex works; dismantling and loading by arrangement. All information without guarantee. Bdjdpfx Aasz A Un Aj Ieh

Condition: used, Year of construction: 2017, operating hours: 20,300 h, functionality: fully functional, overall weight: 350 kg, total length: 1,110 mm, total width: 800 mm, total height: 1,110 mm, power: 15 kW (20.39 HP), fuel type: electric, volume flow: 2,970 m³/h, operating pressure: 10 bar, noise level: 65 dB, protection type (IP code): IP55, ALUP Allegro 15 - 15 kW variable speed rotary screw compressor For sale: ALUP Allegro 15 industrial rotary screw compressor equipped with variable speed control. Thanks to frequency control, the compressor automatically adjusts its speed to the actual compressed air demand. This makes it an energy-efficient solution, especially for fluctuating compressed air usage. Specifications: Manufacturer: ALUP Model: Allegro 15 Bdodpez Ahkmofx Aa Ioh Power output: 15 kW Type: Rotary screw compressor Control system: Variable speed / frequency-controlled Controller: ALUP Air Control 4 Condition: Good working order Professional industrial grade Asking price: €3,250 excl. VAT

Condition: used, Year of construction: 2005, operating hours: 43,152 h, functionality: fully functional, machine/vehicle number: API570324, overall weight: 1,076 kg, total length: 1,700 mm, total width: 900 mm, total height: 1,600 mm, space requirement length: 2,700 mm, space requirement width: 1,900 mm, space requirement height: 2,100 mm, power: 37 kW (50.31 HP), fuel type: electric, volume flow: 406.8 m³/h, operating pressure: 13 bar, pressure (max.): 13 bar, Equipment: documentation/manual, refrigerant dryer, type plate available, Complete industrial compressed-air package comprising an Atlas Copco GA37 VSD 37kW variable-speed rotary screw compressor together with a 2018 Hi-Line Tundra 300 refrigerated air dryer. The variable-speed drive automatically adjusts compressor output according to air demand, making this an efficient solution for industrial applications with varying compressed-air requirements. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. The system includes a HI-LINE TUNDRA 300 REFRIGERATED AIR DRYER - Model: Tundra 300 - Year: 2018 - Maximum working pressure: 16 bar - 230V single-phase - Power: 1.73kW Bjdpfezzpttsx Aa Iedh - Refrigerant: R407C - Serial No: 18M-014875 - Original operating manual included The dryer has been installed alongside the Atlas Copco to provide a complete compressed-air solution. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. Available for inspection by appointment. Location: Caerphilly, South Wales Buyer to arrange collection/disconnection and transport. Further photographs and operating information available on request.

Condition: good (used), Year of construction: 2002, operating hours: 39,000 h, overall weight: 532 kg, total length: 1,285 mm, total width: 920 mm, total height: 1,050 mm, power: 18.5 kW (25.15 HP), volume flow: 156.6 m³/h, pressure (max.): 10 bar, noise level: 68 dB, Equipment: documentation/manual, type plate available, Very well-maintained Ingersoll Rand screw compressor, in excellent technical and visual condition. Fully serviced and ready for immediate use. New hour meter installed. 18.5 kW, 2.61 m³/min, 10 Bar. Bdodpsztl Udsfx Aa Ish

Condition: good (used), Year of construction: 2007, overall weight: 4,215 kg, volume flow: 1,506 m³/h, pressure (max.): 10 bar, Equipment: type plate available, PRODUCT - CompAir Bedpfx Aaopxm Exe Isdh TYPE - L160 S/N - 349031/0705 YEAR - 2007 POWER (kW) - 160 OUTPUT. (m3/min) - 25.1 CIS (bar) 10

Condition: like new (used), Year of construction: 2021, operating hours: 57 h, functionality: fully functional, machine/vehicle number: V002117/16, overall weight: 450 kg, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 66 m³/h, operating pressure: 10 bar, pressure (min.): 0.5 bar, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, Hertz HBD 7 screw compressor, 7.5 kW – 10 bar – 57 operating hours – including refrigerated dryer Description: Hertz HBD 7 screw compressor – in like-new condition – only 57 operating hours. For sale is a Hertz HBD 7 screw compressor system from 12/2021 with only 57 operating hours. The system has been operated very little and is in very good, like-new condition, both visually and technically. Technical data of the compressor: * Manufacturer: Hertz Kompressoren * Model: HBD 7 Bdedpszt Sriofx Aa Ijh * Year of manufacture: 12/2021 * Operating hours: only 57 hours * Power: 7.5 kW * Max. pressure: 10 bar * Volume flow: 1.1 m³/min * Voltage: 400 V / 3 phases * Frequency: 50 Hz * Screw compressor, oil-cooled * Serial number: see nameplate Refrigerated dryer: * Model: Dryair DK 40 * Year of manufacture: 12/2021 * Max. pressure: 16 bar * Power: 0.37 kW * 230 V / 50 Hz * Refrigerant: R134a The system is mounted on a compressed air tank and is ready for immediate use as a complete unit. The photos show the actual system being offered. Price: €6,900 net, negotiable plus statutory VAT. Inspection and test run possible by arrangement. Collection preferred. Loading can be arranged by agreement.

Condition: used, BOGE C 9 Screw Compressor, 7.5 kW / 10 bar Manufacturer: BOGE Type: C 9 Year of Manufacture: 2017 Machine Type: Screw Compressor / Industrial Compressor Volume Flow: 1,060 m³/min Final Compression Pressure: 10 bar For sale is a used BOGE C 9 screw compressor, including the ELMED HELIO-STROB BETA A2 stroboscope measuring system, separate stroboscope hand lamp, connection cable and operating manual. The compressor is suitable for supplying compressed air to machines, workshops, production facilities and manufacturing companies, as well as for general industrial compressed air applications. Operation is via the BOGE base control system with a digital operating and display panel. Technical data: Manufacturer: BOGE Type: C 9 Year of Manufacture: 2017 Equipment Type: Screw Compressor Volume Flow: 1,060 m³/min Final Compression Pressure: 10 bar Motor Power: 7.5 kW Motor Speed: 3000 min⁻¹ Operating Hours (according to display): 15,749 h Control System: BOGE base control CE Marking: present Made in Germany ELMED HELIO-STROB: Bodpozxpi Nsfx Aa Iedh Manufacturer: ELMED Messtechnik Series: HELIO-STROB Type: BETA A2 Equipment Type: Stroboscope Measuring System Mains Connection: 115 / 230 V AC Mains Frequency: 50–60 Hz Max. Power Consumption: 80 VA External Clock Input: present CE Marking: present BOGE base control system Digital operating and display panel Emergency stop switch Sound-insulated housing CE marking ELMED HELIO-STROB BETA A2 control unit ELMED stroboscope hand lamp External clock input Digital display Connection cable Operating manual HELIO-STROB Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. BOGE operating display shown in the on state. ELMED HELIO-STROB shown in the on state. Nameplates present. Dimensions: BOGE C 9 (W × D × H): approx. 483 × 907 × 955 mm ELMED HELIO-STROB BETA A2 control unit: approx. 280 × 240 × 80 mm ELMED hand lamp: approx. 182.5 × 117 × 117 mm Shipping Data: Weight BOGE C 9: approx. 215 kg Weight ELMED control unit: approx. 2.3 kg Weight ELMED hand lamp: approx. 1.5 kg Total weight of equipment: approx. 219 kg plus cable and operating manual Shipping by freight forwarder possible Scope of Delivery: 1 × BOGE C 9 screw compressor 1 × ELMED HELIO-STROB BETA A2 control unit 1 × ELMED stroboscope hand lamp 1 × Connection cable 1 × Operating manual HELIO-STROB Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors and prior sale.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 29,928 h, functionality: fully functional, machine/vehicle number: API124918, overall weight: 810 kg, power: 30 kW (40.79 HP), volume flow: 331.2 m³/h, pressure (max.): 10 bar, type of cooling: air, Chicago Pneumatic CPVS 40 variable speed screw compressor – 30 kW – manufactured in 2015 For sale: a well-maintained Chicago Pneumatic CPVS 40 screw compressor. This compressor features variable speed control, allowing it to efficiently adapt to the compressed air demand. The compressor has already been serviced and is ready for immediate use. Bjdpfx Aajzkvb No Iodh Specifications: Type: Chicago Pneumatic CPVS 40 Year of manufacture: 2015 Motor power: 30 kW / 40 hp Capacity: 5.52 m³/min Maximum working pressure: 10 bar Voltage: 400 V / 50 Hz / 3 phases Motor speed: 3,555 rpm Weight: approx. 810 kg Operating hours: 29928/27409 Variable speed control Serviced and ready for use This compressor is suitable for industrial applications where a reliable and energy-efficient compressed air supply is required. Optionally available with a new or used compressed air tank.

Condition: good (used), Year of construction: 2012, operating hours: 30,006 h, functionality: fully functional, Screw compressor, manufactured by RENNER Type RS 11-10, year of manufacture 1995 Type RS-Top 15, year of manufacture 2012 Refrigerant dryer, year of manufacture 2022 Technical data for oil-injected screw compressor, type RS 11-10 Manufacturer: RENNER Type: RS 11-10 Year of manufacture: 1995 Delivery rate: 1500 l/min Max. operating pressure: 10 bar Motor power: 11 kW Technical data for oil-injected screw compressor, type RS-Top 15 Manufacturer: RENNER Type: RS-Top 15 Year of manufacture: 2012 Delivery rate: 1960 l/min Max. operating pressure: 10 bar Motor power: 15 kW Technical data for associated refrigerant dryer (compressed air dryer) Manufacturer: RENNER (produced by Friulair S.r.l.) Type: RKT CQ 0150 Refrigeration circuit: refrigerant Year of manufacture: 2022 Refrigerant: R134a Filling quantity: 0.25 kg Bjdez A Sypjpfx Aa Isdh Max. operating pressure: 14 bar Power: 0.40 kW Fuse rating: 10 A All information is subject to change without notice. A demonstration under power is possible at any time in our showroom.

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil Bdedpszu Aibefx Aa Ieh - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: excellent (used), Year of construction: 1997, operating hours: 88,000 h, functionality: fully functional, overall weight: 1,200 kg, motor manufacturer: kaeser, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 690 m³/h, operating pressure: 10 bar, pressure (min.): 8 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, type plate available, KAESER CS121 Screw Compressor (75 kW, 10.3 m³/min, 10 bar) KAESER CS121 75 kW, 10 bar screw compressor for sale in excellent condition. Maintained and fully serviced since new. Last major service performed at the recorded operating hours. Manufacturer: Kaeser CS121 Year of manufacture: 1997 Sigma Control system Serial number: 1211178 Operating pressure: 10 bar Power: 75 kW Capacity: 11 m³/min (695 m³/h) Bodez A Irujpfx Aa Ijdh Operating hours: Standby: 86,033 h / Loaded: 28,900 h Sigma Control system Motor speed: 1500 rpm Electrical power: 75 kW Overall dimensions: Length 1960 x Width 1240 (+150) x Height 1440 mm Weight: 1200 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 19,000 h, functionality: fully functional, power: 7.5 kW (10.20 HP), volume flow: 700 m³/h, operating pressure: 12 bar, pressure (min.): 4 bar, pressure (max.): 13 bar, type of cooling: air, Equipment: refrigerant dryer, type plate available, Fully functional Atlas Copco frequency-controlled screw compressor with built-in cooling dryer. Complete service performed, including replacement of oil, oil filter, air filter, separator filter, and thermostat. Bjdpfxez Dpt Ae Aa Isdh

Condition: ready for operation (used), operating hours: 35,958 h, functionality: fully functional, machine/vehicle number: 1105, Various compressors, dryers, ventilation, and cooling systems Due to the cessation of our business operations, we are offering various professional compressors, compressed air, ventilation, and cooling systems for sale. The systems come from our own production environment and can be acquired individually or, if desired, in combination. The range includes, among other things: Bjdpfx Aaoz H Sd As Iedh - Kaeser compressor system with Sigma Control Basic - Kaeser Secotec TB 19 refrigerated dryer, year of manufacture 2021 - Ecoair D10 compressor, 7.5 kW, max. 10 bar, year of manufacture 1996 - Various industrial ventilation/vacuum systems - Cooling systems and associated equipment - Filters, piping, and other accessories Suitable for use in metalworking, production, workshops, and other industrial applications. These systems have been used in our production process and are now available due to the business closure. The machines can be inspected by appointment. Sale per system is possible. The acquisition of multiple systems in a single transaction can be discussed. Price: upon request / offers per machine If you are interested, please specify which system you are referring to. Additional photos, technical data, and information are available upon request.

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, functionality: fully functional, power: 55 kW (74.78 HP), volume flow: 9.7 m³/h, operating pressure: 8 bar, pressure (min.): 4.5 bar, pressure (max.): 8.5 bar, type of cooling: air, Equipment: documentation/manual, type plate available, Fully functional Atlas Copco screw compressor, model GA 55, in new condition. Bdjdpezzq Ewjfx Aa Ish

Condition: new, Year of construction: 2026, 20 Bar Screw Air Compressor for Fiber Laser – (15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed specifically for fiber laser cutting applications requiring high pressure (20 bar). This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency, reliability, and minimal transmission losses. The unit features a variable speed drive (VFD), ensuring soft start and automatic pressure regulation based on real-time air consumption. This results in significant energy savings and stable operation. Compared to standard compressors (such as Airhorse), this unit offers a much lower noise level (≤63 dB) and smoother operation. Technical Specifications: Model: Impact 20Bar Working Pressure: 20 bar (1.98 MPa, adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Bdedoy Ecu Uspfx Aa Ish Noise Level: ≤ 63 dB (significantly quieter than conventional compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system (0.01 μm, very low oil content) Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Key Advantages: Ideal for fiber laser cutting (20 bar applications) Direct drive system = higher efficiency, less maintenance VFD control = energy saving & constant pressure Soft start motor = reduced mechanical stress Very low noise level compared to standard compressors Compact and space-saving design Reliable, industrial-grade components Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low yearly maintenance cost. Also available in: 16 bar version Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2026, 16 Bar Screw Air Compressor for Fiber Laser –(15 kW, VFD, Tank Mounted, Complete System) Description: High-performance screw air compressor designed for fiber laser cutting applications. This is a modern direct-driven (direct coupled) compressor, where the screw air-end is directly coupled with the motor for maximum efficiency and reliability. The unit is equipped with a variable speed drive (VFD), allowing soft start and automatic pressure regulation based on air consumption. This significantly reduces energy usage and mechanical stress. Compared to conventional compressors (e.g. Airhorse), this unit operates with a much lower noise level (≤63 dB). Technical Specifications: Model: 16 Bar Version Working Pressure: 16 bar (adjustable) Motor Power: 15 kW / 20 HP Air Flow: approx. 1.4 m³/min Drive Type: Direct coupled (no belts) Motor Type: Permanent magnet motor with VFD Starting Method: Soft start (via inverter) Cooling System: Air cooled Noise Level: ≤ 63 dB (significantly quieter than standard compressors) Voltage: 380V / 50Hz / 3 Phase Integrated Equipment (4-in-1 System): Air receiver tank – 400 liters Refrigerated air dryer High-efficiency filtration system Oil-air separation system Electronic controller Dimensions & Weight: Dimensions: 1800 × 850 × 1770 mm Weight: approx. 440 kg Bsdpey Ecuzefx Aa Ijdh Key Advantages: Designed for fiber laser cutting machines Direct drive system = higher efficiency, less maintenance VFD control = energy saving & pressure stability Soft start motor = reduced wear and longer lifespan Very low noise level compared to standard compressors Compact, space-saving design High-quality components (SKF bearings, inverter control, etc.) Maintenance: Oil change: every 4000 hours Air filter: every 2000 hours Oil filter: every 2000 hours Oil separator: every 4000 hours Low annual maintenance cost. Also available in: 20 bar version (for higher pressure applications) Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: used, Year of construction: 2001, operating hours: 70,000 h, overall weight: 5,000 kg, power: 250 kW (339.91 HP), pressure (max.): 10 bar, type of cooling: water, Well-functioning oil-free compressor (also suitable for Spareparts Airend) Bdjdpfx Ajxbdrdja Ioh

Condition: used, Year of construction: 1995, functionality: fully functional, Screw compressor Manufacturer: RENNER, Type: RS 11-10 Year of manufacture: 1995 Technical data Manufacturer: RENNER Type: RS 11-10 Year of manufacture: 1995 Delivery rate: 1500 l/min Max. operating pressure: 10 bar Motor power: 11 kW Bdjdpfx Asz A Tdcja Ijh All information is subject to change without notice. A demonstration under power can be arranged at any time in our showroom.

Condition: repair required (used), Year of construction: 2010, operating hours: 64,380 h, functionality: unexamined, power: 132 kW (179.47 HP), volume flow: 1,562.4 m³/h, pressure (max.): 8.1 bar, type of cooling: water, Screw compressor Atlas Copco GA132VSDW Bjdpjzznqkjfx Aa Isdh Inverter integrated 132 kW 8.10 bar 26.04 m3/min Year of manufacture: 2010 Operating hours: 64,380 h

Condition: ready for operation (used), Year of construction: 1999, operating hours: 0 h, PROD. BOGE Bjdpfx Aasz E Hhte Iedh TYPE SD40 S/N 31412 YEAR 1999 POWER (kW) 30+1.10 CAPACITY (m3/min) 4.30 PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 17000 / 51100 FREQUENCY CONVERTER no BUILT-IN DRYER yes HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: used, Year of construction: 2022, operating hours: 15,000 h, functionality: fully functional, overall weight: 2,020 kg, power: 90 kW (122.37 HP), volume flow: 960 m³/h, operating pressure: 8 bar, pressure (max.): 8 bar, Equipment: documentation/manual, type plate available, We offer this used Hertz FRECON 90 P screw compressor, manufactured in 2022. Pressure: 8 bar Capacity: 16 m³/min Rated power: 90 kW Weight: 2020 kg Voltage: 400 V Bdodpez Abb Ejfx Aa Ieh Frequency: 50 Hz Maximum shaft speed: 2340 min⁻¹ Date of manufacture: 04/2022 If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: excellent (used), Year of construction: 2008, PROD. KAESER TYPE BSD72 S/N 1909 YEAR 2008 POWER (kW) 37 CAPACITY (m3/min) 7 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED (AIR/WATER) air ON TANK no Bdjdpfsz E Hb Tsx Aa Ish DOCUMENTS no

Condition: excellent (used), Year of construction: 2018, S016947 PROD. ALUP TYPE ALLEGRO26 CE S/N ITJ210759 YEAR 2018 POWER (kW) 26 CAPACITY (m3/min) 0.77-4.73 at 7 bar Bjdpfx Aajz E Rpbe Isdh PRESSURE (bar) 7-13 HOURS (RUNNING/TOTAL) 47881 FREQUENCY CONVERTER yes BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no CONNECTION 1" NEW/USED used DOCUMENTATION no