Used Scm Tech 99 L for sale (631)

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Rear table approx. 1440 x 220 mm Tilting table double-sided Nlsdpfxoy H N Tmj An Isd Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, operating hours: 336 h, edge thickness (max.): 8 mm, total length: 4,764 mm, overall weight: 1,840 kg, controller model: Maestro Pro Edge, Edge banding machine with only 336 operating hours & comprehensive accessories! TECHNICAL DETAILS Max. edge thickness: 8 mm MACHINE DETAILS Control: Maestro Pro Edge Electrical Data Voltage: 400 Volt Frequency: 50 Hz Nlsdpfjydc Abjx An Iod Dimensions & Weight Machine length: 4,764 mm Weight approx.: 1,840 kg Operating hours: 336 h Edge Banding Machine Configuration: Flush trimming and scraper unit, radius: 1 mm Flush trimming and scraper unit, radius: 2 mm Spraying unit for edge finishing Spraying unit for delicate edges Surface scraper "RC-V" Brushing unit "SP-V" "SAVENERGY" kit "EASY SIZE" device Internal lighting for the enclosure and gluing area Ceramic lamp with infrared rays Electronic positioning of the pressure rollers Spare adhesive tank "SGP" with NC dosing system Additional adhesive tank "SGP" with NC dosing system Manual feed "Nesting" tracing rollers Diamond tools H=64 for pre-milling unit, 2 teeth Base

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Gantry (Portal) machine, belonging to the line (SOFIT code: W05025) Vacuum system (with its pump) N. 2 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which out-feed the panels from the Unloader) Separate electric and command panel Electronic Programmer PLC MAGELIS Perimetral safety metal grids Working capacity (cycles/min) 15-18 (ca.) Min/Max panels thickness mm 10 - 60 (ca.) Min dimensions of the panels mm 210 x 230 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw Nljdjyywi Aopfx An Ijd

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) Njdpowhmdfofx An Ield Electronic Programmer EasyLing Safety and sound-proof enclosure No. 3+3 Vertical columns to support the working units Min. useful working width (mm) 240 Max. useful working width (mm) 3100 Min. useful working tickness (mm) 3 Max. useful working tickness (mm) 150 Distance between center-axes of the disappearing dogs (mm) 800 Adjustable (min/max) feeding speed (m/min) 4 - 24 Total installed power No. 4 Working groups (for each machine's side): Scoring Unit Jumping Scoring Unit 1 x Kw 3 (RPM 6000) Hogging Unit 1 x Kw 6 (RPM 6000) 0-10° Jumping Milling Unit 1 x Kw 6 (RPM 6000) 0°-90° Milling-Shaping unit 1 x Kw 6 (RPM 6000) 0°-90°

Condition: excellent (used), SINGLE SIDE EDGE BANDER (Left) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Edges thickness in strips / lippings (min/max) mm 0,4 / 8 (12)* Panels thickness (min/max) mm 8 / 60 Numerical Control "StarTouch" + "Touch 7" Feeding speed m/min 12-18 Top pressure system with rubber belt (C.N.) Spraying unit (Anti-sticking liquid) AAR In-feed fence, adjustable by N.C. "EASY SIZE PLUS" Pre-milling Unit (vertical joint trimmers) 2 x Kw Lamps to heat the workpieces side Glueing Unit (P.U.R. Glue + Quick Melt system) "VC/800" - "VC/6" + "AirFusion AF15" Band Pressure zone (N.C. adjustment) Edge coils supporting unit - 1 Nodpfxexlqntj An Iold Snipping (end-cutting) K/SEL Rough Trimming unit RS/K Fine Trimming unit RI / 800 (3 pos.) Multi Function Unit (Profile contour Trimming Unit) “4 EDGE” KIT Spraying Unit (for sliding liquid) Profile edge scraping unit RAS/1000 Glue scraper RCA / 2C Milling grooving unit K-100 (1 x Kw 1,8) 90° Hot Air Heater (to reactivate the color of plastic tape) Panels Return System "SAG" Mod. SPINNER 47 / 63

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 230 / 1600 (ca.) Numerical Control / Software WinEdge Adjustable feeding speed (m/min ) 10 - 30 Safety and sound-proof enclosures/cabins SIZING PART (for each side): No. 2 Hogging Units (2 x Kw 5,8 ca.) Nledpfx Anol Hydmo Isd No. 2 Milling units (2 x Kw 4 ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt glue + Multing Unit) Pressure zone (adjustable by CN) Edge coils supporting unit (No. 6 reels) Rough Trimming unit (2 x Kw 1 ca.) Fine Trimming unit 08.055 (2 x Kw 0,5 ca.) 0°-30° No. 5 Milling grooving units (5 x Kw 4 ca.) Profile Scraping unit Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit + Hot Air Heater (to reactivate the color of plastic tape)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,4 / 3 Panels thickness (min/max) mm 14 / 60 Working width (min/max) mm mm 260 (ca.) / 3200 Numerical Control /Software MAESTRO PRO EDGE Adjustable feeding speed (m/min) 10- 40 Safety sound-proof enclosures/cabins + Distance (center-axes) of Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit AS (1 x Kw 4) Hogging Units DTR (2 x Kw 8) Spraying unit (Anti-sticking liquid) AAR EDGE-BANDING PART (for each side): Lamps to heat the workpieces side Glueing Unit (Hot Melt Glue + Quick Melt system) Nodjwhi Sljpfx An Ijld Band Pressure zone (N.C. adjustment) Edge coils support (No 2 reels) motorized Snipping (end-cutting) unit YU/SP-750 (30 m/min) Rough Trimming unit RSP Fine Trimming unit (Multi-profile, by N.C.) RI/S 2P Corner Rounding unit ( Contour Trimming) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Profile Scraping unit RAS/S Glue scraping unit RCA/2C Spraying Unit (for polishing liquid) Buffing unit SPE Milling grooving unit U (1 SX + 1 DX) 2 x Kw 5,5

Condition: good (used), Year of construction: 2016, functionality: fully functional, Used edge banding machine SCM - Model: Olimpic K360 T-ER1 - Very good condition. - Immediately available - Video on request - Year of manufacture: 2016 - High-end configuration (2 extra glue pots) Nljdpoyrr Naefx An Iod

Condition: good (used), Year of construction: 2021, Used edgebander SCM Olimpic K360 - 11 m/min - 8 - 60 mm panel thickness - 0.4 - 6 mm edge thickness Nljdpsyrrpmefx An Ijd - machine length approx. 4,200 mm - weight approx. 1,200 kg - immediately available - few operating hours/metres (see photo) If you have any questions, please let us know.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Working height: 8–60 mm Nledpfx Anjzcwmfe Ied Strip edge thickness: 0.4–8 mm Roll edge thickness: 0.4–3 mm Spacer on the infeed guide “EASY SIZE” device Grinding unit Infrared ceramic lamp “VC-S4.1” gluing unit “SGP” glue tank with CNC dosing, replacing the standard tank Pressure roller unit “RT-V” edge trimming unit Head trimming unit “K/SEL” Flush trimming unit “R-HP Multiedge 2R” Rounding unit “ROUND X Multiedge” Edge scraper unit “RAS-HP Multiedge 2R” Glue scraper unit for surfaces “RC-N” Brush unit “SP-V” Anti-adhesive spray unit “AAR” Spray unit for final edge finishing Spray unit for delicate edges “Maestro Active Edge” control system “eye-M” operator console with integrated PC Provision for barcode reader Internal lighting of the cabin and gluing area Touch-up rollers for “Nesting” processing Compliance with European safety regulations Approximate weight: 1829 kg Only 17,304 meters of edge material processed Installed in August 2024 Available in July 2026

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: AB /139622, functionality: fully functional, input frequency: 50 Hz, pivoting range: 56 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,300 rpm, Equipment: CE marking, rotational speed infinitely variable, We are offering this well-maintained SCM T 150 Class spindle moulder, year of manufacture 2000. Description: Spindle moulder with 3-axis control and 999 program memory slots (spindle height, fence, spindle tilt, revolutions) Spindle tilt -10° to +46° Inverter motor, adjustable spindle speed from 3,300 to 10,000 rpm Table extensions at front and rear Swivelling fence Njdpfxjy Ir Ezj An Ijld Clearance between cutter and table is adjustable Very good condition, minor signs of use Including accessories: • 5 additional SK40 quick-change spindles • Curved fence • Power feeder with stand • Various hand tools If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2023, functionality: fully functional, Machine is new, packed and ready for transport in Sellers warehouse in Croatia ! OLIMPIC k 560 composition "T-ER2" (40) - European safety regulations (CE norms) - ”StarTouch" electronic control with 12" display touchscreen n° 100 working programs which can be customized - "RT-V1" pre-milling unit - "VC-VM" gluing unit (Installed power: 3 Kw, Heating time: 12 min , Glue pot capacity: 1,5 kg) - "SGP" - Smart Gluing Pot - "K/SEL" end cutting unit (Motors power: 0,35 kW, Speed of tools: 12.000 rpm) - "R-K" trimming unit (Motor power: 0 ,55 kW, Speed of cutters: 12.000 rpm, Exceeding material to the panel thickness: 2+2 mm, Min. panel thickness with radius: 12 mm, Vertical/front copying devices: disc/pad, Tool radius: 2 mm) - "ROUND X" rounding unit (Motor power: 0,35 kW, Speed of cutters: 12.000 rpm, Edge thickness: 0,4 3 mm, Panel thickness with a straight angle: 10 50 mm, Panel thickness with a shaped angle according to the profile): 10 30/40 mm, Tool radius: 2 mm) - "RAS-HP MULTIEDGE 2R" edge scraping unit - "Nesting" copying device TECHNICAL DATA Variable track feed speed m/min 12 -18 Panel thickness mm 8-60 Thickness of edges in strips mm 0,4-6 Thickness of rolled edges mm 0,4-3 Max. section of rolled edges mm² 135 Distance between two successive panels mm 600 Minimum panel length (100 mm min. width) mm 140 Min. length of edge in rolls mm 180 Min. length of edge in strips mm 220 Min. panel width (210 mm min. length) mm 95 Opening for panel support roller mm 500 Worktable height mm 900 Nodpfx Anjza U H Re Ield MACHINE DIMENSIONS (transport): lenght: 5.005 mm wide: 1.000 mm height: 1.950 mm

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 23 A, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, total length: 4,200 mm, overall weight: 1,430 kg, Equipment: CE marking, documentation/manual, We offer this used SCM Olimpic K 360 T-ER1 machine, manufactured in 2017. Feed speed: 11 m/min Panel thickness: 8-60 mm Edge thickness: 0.4-6 mm Edge material in rolls: 0-3 mm Edge material in strips: up to 6 mm Compressed air pressure: 6 bar Minimum part length: 140 mm Minimum part width: 90 mm Distance between parts: 600 mm Power supply: 400V Weight: 1430 kg Machine length: approximately 4.10-4.20 m Equipment: 1. Pre-milling unit - 2 counter-rotating diamond milling heads - material removal of up to approximately 3 mm before edging 2. EVA gluing unit - Teflon tank - fast heating - option to use interchangeable tanks 3. Pressing zone - driven roller + 2 pressing rollers 4. K-2 end trimming unit - straight or bevel cutting - automatic mode switching 5. Upper/lower milling unit - edge processing: flush, radius, or bevel 6. Corner rounding unit - processing of front and rear corners - radius R1/R2 7. Profile scraper - finishing of edge radius 8. Flat scraper - removing glue residue 9. Polishing unit - removing glue residue 10. Anti-adhesive fluid system - 2 types of fluids for easier removal of glue residue The machine is in fully working condition. It has been in continuous operation. Nljdozb Aahjpfx An Isd Testing is possible. If you have any questions or need additional information, please contact us.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Equipment: documentation/manual, SCM - STEFANI AUTOMATIC DOUBLE-SIDED FORMATING & EDGEBENDING LINE consist of: Nedpfx Aszb Eu Usn Ijld 1. SCG vacuum feeder / loader and conveyor 2. SCM STEFANI EVOLUTION SSB 1 automatic double-sided formating and edgebending machine − clean pack L − anti adhesive unit AAR − crushing unit − automatic milling unit − EVA glue module − SLIM LINE module − NORDSON units for PU glue − end trimming unit − horizontal sawing unit − fine trimming unit − milling unit for edge rounding of solid wood − multiedge scraping unit − brushing unit Total lenght: 9750 mm 3. PANEL TURNER GP DC / BOR 4. SCM STEFANI EVOLUTION SSB 2 double-sided automatic formating and edgebending machine − clean pack L − anti adhesive unit AAR − crushing unit − automatic milling unit − EVA glue module − SLIM LINE module − NORDSON units for PU glue − end trimming unit − horizontal sawing unit − fine trimming unit − ROUND 4 unit with Zero lock − milling unit for edge rounding of solid wood − multiedge scraping unit − brushing unit 5. BIESSE Techno Logic - automatic throughfeed drilling machine 6. SCG vacuum feeder / loader and conveyor Total lenght: cca 23 m Year of production: 2018

Condition: excellent (used), functionality: fully functional, Edge bander for 6 workpieces, "SCM" model SUPERSET XL V380/50 - "CE" USED - VERY WELL MAINTAINED, STILL IN OPERATION [ID: cvn-088] - 6 workpieces: BOTTOM/RIGHT/LEFT with CNC/TOP/BOTTOM/UNIVERSAL Nlsdpfx Aney T Ndls Iod - Working width: 230 mm - Tandem device for short pieces - Variable speed drive - COMPLETE WITH CUTTERS Available subject to prior sale.

Condition: excellent (used), Year of construction: 2004, TECHNICAL DATA : Planing width 230 mm Planing height 120 mm Infeed table : 2000 mm Nlsdpfx Aneykch Ds Ijd Infeed speed : 2 - 25 mtr/min ( 1,1 Kw ) Spindle configuration : 1) horizontal, lower 230 mm 5.5 kW 2) vertical right 130 mm 3) vertical left 130 mm (2nd and 3rd spindle) 11 kW( Digital adjusteble ) 4) horizontal, top 230 mm 7.5 kW ( Digital adjusteble ) 5) Horisontal lower, 4 Kw all spindles up / down, right / left Spindle diameter 40 mm From the top 3 introducing rollers, metal, torsion, including 2 double Top pulling roller, double rubber Pressure 1 pc on the side A rubber pulling roller in the lower table top, before outfeed Central lubrication Measures : L 3850 x W 1200 x H 1600 mm, weight : 1957 Kg.

Condition: good (used), Year of construction: 2008, machine/vehicle number: 082429, functionality: fully functional, overall weight: 1,260 kg, year of last overhaul: 2025, Equipment: CE marking, SCM Olimpic K500 – Edge Bander – Year 2008 For sale: SCM Olimpic K500 edge bander, year 2008. Reliable and robust machine, ideal for joinery workshops and industrial production. ✔️ Fully functional Nljdpfx Aey Sph Ien Ijd ✔️ Ready for use, requires no work ✔️ Always carefully maintained ✔️ Excellent overall condition The machine will be available from June. Perfect solution for those seeking a professional edge bander that is immediately operational. 📍 Inspection and test operation available upon request. 📞 For more information, please do not hesitate to contact us.

Condition: like new (used), working width 230mm working height 120mm 5 heads head arrangement bottom 5.5kW right 5.5kW left 5.5kW top 7.5kW bottom 5.5kW head speed 6000 rpm head adjustment in two axes smooth feed speed adjustment Nljdjwlk Ebspfx An Ijd year of production 2001 power supply 400v

Condition: excellent (used), Year of construction: 2003, Year of manufacture: 2003 Voltage: 400 V Nsdpotr A Evsfx An Iold Frequency: 50 Hz Weight: 3200 kg Number of axles: 3

Condition: used, Year of construction: 2022, We are selling a CNC drilling center, SCM Morbidelli CX100, model year 2022, in excellent condition. This machine is designed for fast and precise processing of furniture components and is ideal for the production of cabinet furniture, kitchens, wardrobes, and other components made of chipboard or MDF. Key Data Manufacturer: SCM Group Model: Morbidelli CX100 Type: FO03 Year of Manufacture: 2022 Serial Number: AB00021843 Nlsdpjy S U Dusfx An Ijd Power Supply: 400 V / 3~ / 50 Hz Connected Load: 29 A Machine Weight: 1309 kg Made in Italy Machine Advantages High drilling speed and accuracy CNC control for efficient series production Compact design with a small footprint Suitable for modern furniture production Reliable Italian SCM manufacturing Condition The machine is regularly serviced and well-maintained. Inspection and operational testing are possible. For more information, technical specifications, or a quote, please contact us.

Condition: ready for operation (used), Year of construction: 2005, machine/vehicle number: GA1/002357, functionality: fully functional, input voltage: 400 V, input current: 51 A, input frequency: 50 Hz, overall weight: 6,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Panel Saw Gabbiani Galaxy T 108 PR – 2005 Manufacturer: SCM Group Weight: 5,000 kg Condition: fully operational Performed maintenance: Complete operational check Inspection of mechanical systems Inspection of electrical system Nlodpfx Aney R Svre Ied General maintenance Professional machine suitable for industrial production. Available for testing.

Condition: used, Year of construction: 1994, Used, excellent condition, top specification, extensive accessories with 3-axis control, pneumatic spindle change, electronic adjustment of the milling fence 99 memory programs, 15 change spindles, adjustable table insert Manufacturer: SCM Model: T150 Class Year of manufacture: 1994 Upgraded motor: 6 / 7.5 kW tilt range from -10° to +45° motor brake motor with 2 speeds, pole-changeable speed settings: 3250/5000/6500/10,000 rpm right and left rotation Table size: 2700 x 700 mm Milling spindle diameter: 15 x 30 mm / 1 x 40 mm Milling spindle clamping: HSK Quick-change spindle system: SK / HSK Nsdpfxjythdvo An Isld Table extension: 2 x 650 mm Extendable frame support Aluminium fence jaws Milling fence with fine adjustment Digital displays for milling fence – diameter – depth of cut – jaw offset Guard and pressure device Top control panel Swiveling control panel - electric height adjustment - electric tilt adjustment - electric milling fence Positioning control for 3 axes: height/tilt/milling fence with 99 programs Digital displays for tilt angle – spindle height – fence depth Swivel-away fence device Socket for feed unit Original price approx. 40,000 – 45,000 EUR Extraction connection 120 x 120 mm Space requirement approx. 2700 x 1300 x 1800 mm Weight approx. 1073 kg Location: 97447 Gerolzhofen, free loaded, unpacked Handover in the current condition as inspected, function tested, without overhaul, without warranty or guarantee.

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Nsdpfxjvyuqfj An Ield

Condition: new, - Maximum equipment for the professional with Tersa knife shaft.- Ideal for demanding craftsmen and joiners- The particularly long planing tables enable easy dressing of the workpieces- Work tables are made of gray cast iron, because of that insensitive and permanently flat- To the rear, planing tables that open at the same time for short set-up times- Helical-toothed steel feed roller ensures constant and even wood intake- Rubber pull-out roller in the outlet of the thickness ensures even wood pull-out- Material feed at four speeds- Plane thickness table adjustment via handwheel with numerical display for the planing height- TERSA planing knife system enables Knife changes within seconds as well particularly quiet running- The large planing fence (1200 mm x 150 mm) can when opened the planing tables remain in position- The high machine weight ensures the highest Precision and smooth running- Preparation for slot drilling equipment Digital version with electric thicknessing table adjustmentTechnical specificationsTotal length of the tables 2250 mmWorking width 520 mmmax. chip removal 5 mm--- Technical data thickness ---Dimensions thickness table 520 x 850 mmmin./max. Working height 3/240 king length thickness 220 mmFeed speeds 5/8/12/18 m / min Planer shaft diameter / planer knife 120 mm / 4 ed ??5,000 rpmMotor 400V / 50Hz / S6-40% 7.0 kW (9.5 HP)Extraction nozzle diameter 1 x 120 mmWeight 695 kg Slot drilling device (option)Table size 470x230 mmCross / longitudinal stroke 160mm / 110 mmVertical stroke 120 mmExtraction nozzle diameter 1x120 mmManufacturer number 5503511 Njdsvwd U Ispfx An Iold

Condition: new, - new -BeschreibungMit TERSA cutter block for sekundenschnelles HobelmesserwechselnTERSA-Hobelmessersystem ermögclear opening particularly geräuscharmen Lonangular verzahnte steel input roller for konstanten and gleichmäßigen HolzeinzugDie particularly langen Abrichttische aus einem piece ermöglichen leichtes Abrichten der WerkstückeGroßer surface fence kann beim opening der Abrichttische in seiner Position bleibenNach rear öffnende AbrichttischeDas hohe Maschinengewicht sorgt for höchste Präzision and ruhigen LonLeistungsstarker Industrie-motorRobuste steel-/GraugusskonstruktionArbeitstische aus Grauguss, nachgeglüht and spannungsfrei, dadurch unempfindlich and dauerhaft planarsurfacing table lip plates for geräuscharmen LonAusstattungsdetails:TERSA-HobelmesserwelleKein Einstellen and Schrauben mehrHobelmesserwechsel in SekundenSelbstarretierendBesonders low noisePerfektes HobelergebnisAbsaugschlauch-AnschlussDie suction nozzle der surface planer and thickness zeigen in the selbe Schlauchanschluss erfolgt from nur einer side wird kein Schlauch benötigt, der um the machine veStabil ausgelegter KettenantriebAntriebsräder aus steelMassiver GraugusslagerbockHobelwerkMassive Rückschlagsicherungen verhindern den kick-back from WerkstückenTERSA-Hobelmesserwelle with three Messern sorgt for ein optimales HobelbildDer MaterialeinzugSchrägverzahnte Stahleinzugswalzen for einen konstanten and gleichmäßigen Materialeinzug without AbdrückeMehreright hand Zähne greifen gleichzeitig for kraftvollen feederVerschleißfrei im Gegensatz zu GummieinzugswalzenTechnische Daten:dimensions and Gewichtelength (Produkt) ca.     2015 mmweight (Netto) ca.     330 kgwidth/depth (Produkt) ca.     990 mmdrive powercapacity driving motor     5 kWsurface planertotal length der tables     1800 mmchip removal max. surface planer     4 mmworking height     900 mmAnschluss Absaugungsuction nozzle diameter thickness     2 x 120 mmAufstellinformationenrequired space length     2015 mmMaschinenkörper width/depth     596 mmrequired space width/depth    1 460 mmworking dimensions length     1000 mmErläuterung required spaceDie dimensions berücksichtigen maximale Verfahrwege or Nutzläking dimensions width/depth     3500 mmMaschinenkörper length     659 mmErläuterung zu working dimensionsDie angegebenen dimensions bitte with dem required space addieren, um the for the machine empfohlene freie assembly area zu cknessDickentisch length     605 mmworking height thickness max.     230 mmDickentisch width     420 mmchip removal max. thickness     4 mmworking height thickness min.     3 mmElektrische DatenAnschlussspannung     400 VStromart     ACPhase(n)     3 PhNetzfrequenz     50 HzHobelmesserwelleHobelwellentyp     TERSAHobelwellendrehzahl     5200 min¯¹Hobelwellendurchmesser     72 mmplaning width max.     410 mmnumber of Hobelmesser     3 Stfeederfeed speed     7 m/minincluded in deliveryTERSA-Hobelmesserwelleeloxierter Aluminium-surface fenceNo. 550 3414 Nlodpfx Aovwga Hen Isd