Used Saw Shaft for sale (11,329)

Condition: excellent (used), Year of construction: 2017, Equipment: CE marking, WELL-MAINTAINED BAND SAW FROM A HOBBY WOODWORKING SHOP, MACHINE BARELY USED Cutting width up to 465 mm (without parallel fence) Cutting width up to 390 mm (with parallel fence) Rubber-coated wheels (low noise) Measuring scale on the fence with magnifying glass Aluminum fence with quick-release mechanism Drive motor 2.1 kW (S6 operation), 1.5 kW (S1 operation) 2 band speeds (380 / 820 m/min) Nljdpfjznliqjx An Ijd Cutting height adjustment via handwheel Saw band width from 6 - 25 mm possible Table can be tilted 0 - 56 degrees Saw band length 3,454 mm 2 dust extraction ports, diameter 100 mm each Weight approx. 170 kg

Condition: repair required (used), Year of construction: 1997, machine/vehicle number: 26992, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 415 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 1,900 mm, cutting width (max.): 4,500 mm, saw blade diameter: 300 mm, height adjustment type: mechanical, rotational speed (max.): 4,750 rpm, STRIEBIG Econom II Vertical Panel Saw (1997) Fully operational Striebig Econom II vertical panel saw removed from our professional joinery workshop following replacement with a newer machine. The machine is fully functional and was in regular use until removal. It cuts accurately, the carriage runs smoothly and all operating functions work as intended. The saw is being sold as in need of repair because it does not have a functioning motor brake, meaning it no longer complies with our workshop's health and safety requirements. It should therefore be inspected and recommissioned by the purchaser before being returned to service. Specification Manufacturer: Striebig Model: Econom II Year: 1997 Machine No: 26992 3 kW motor 415V, 3 Phase Maximum cutting height: 2200 mm Nljdpfx Ajzimnkjn Isd Blade speed: 4750 rpm Dust extraction connection Viewing is welcome. Collection only from Finchampstead, Berkshire. Buyer responsible for loading and transport.

Year of construction: 2018, condition: excellent (used), Orbmix N&N Mix 450E twin shaft paddle mixer with most options - EasyClean, tote bin loader, touchscreen, pneumatic opening etc. Beautiful condition. Nledpek Raw Rjfx An Ijd

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Price has just been reduced and will not reduce any further. Please only enquire if you want to buy it at this price before we scrap it as space is needed. Nsdperubg Hofx An Isld

Condition: excellent (used), We have 3 x identical MR600 mixers for sale. All bought new in 2016, available with optional tote bin hoists. These are in beautiful condition and available to buy straight away. Nlsdpfx Ajn Tr Ston Ied

Condition: good (used), Late model APC turret saw. Has been cutting frozen loins into chops. Nodetq A Nxopfx An Ijld

Condition: used, Year of construction: 2014, two identical machines available, were in production until April 2025. Can be supplied with or without loading hoist for 200 litre tote bins. Machines were supplied new by Multivac UK and have come from a bakery where they were mixing fillings for pasties and sausage rolls. Njdpfx Anjwd Un Re Isld

Condition: excellent (used), Cutting capacity, circular: 255 mm Cutting capacity, rectangular: 315 x 230 mm Cutting capacity, square: 230 mm Cutting capacity, miter cut at 45° circular: 160 mm Saw blade dimensions: 27 x 0.9 x 2750 mm Nodpfx Asznh Nmjn Ield Saw blade speed, infinitely adjustable Saw blade drive: 400 V, 1.5 kW Space requirement: 1800 x 1600 x approx. 1800 mm Weight: 380 kg

Condition: ready for operation (used), Max. cutting height: 87 mm Max. cutting length approx.: 200 mm Saw blade diameter max.: 250 mm Nledpfoznh Hfjx An Iod Saw blade speeds via gearbox approx.: 90 - 4000 rpm Drive motor: 380 V, 1.2 kW Space requirement: 1050 x 750 x 1100 mm Weight approx.: 210 kg

Condition: good (used), Year of construction: 1982, Cutting capacity 90° round 320 mm square 320 x 320 mm rectangular 540 x 200 mm Cutting capacity 45° round 175 mm square 175 x 175 mm rectangular 150 x 270 mm Main motor 1.5 kW Cutting speed, stepless 17 - 120 m/min Saw blade size 3660 x 27 x 0.9 mm Dimensions L x W x H 1900 x 1000 x 1200 mm Net weight 410 kg Accessories / Special Features: • Semi-automatic version • Raising and lowering of the saw frame • Hydraulic saw pressure regulation • Hydraulic material clamping • Automatic opening and closing of the clamping jaws • Cutting speed steplessly adjustable between 17 - 120 m/min • Automatic cutting pressure regulation • Material stop length 500 mm Njdpfexztfaex An Iold • Coolant system • Mitre swiveling device: The entire machine can be easily and quickly swiveled steplessly The workpiece clamping cylinder and the cutting pressure regulator have been newly resealed by us. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2004, cutting diameter 320 mm cutting width 320 x 320 mm saw band length 5.090x34x1,1 mm cutting speed 20 - 110 m/min feed length 750 einfach mm min. dia. 10,0 mm min. cut-off length 6,0 mm total power requirement 7,0 kW weight of the machine ca. 2.200 kg Nljdpozluk Sofx An Ied

Condition: used, Year of construction: 2019, total length: 4,200 mm, total width: 1,200 mm, total height: 2,450 mm, Colour: Black Weight: 600 kg - Year: 2019 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5025 CV - Max. cutting height horizontal [mm]: 1550 - Max. cutting width [mm]: 3300 - Max. cutting depth [mm]: 55 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 250 - Arbor saw blade diameter [mm]: 30 Nlsdpfezk Ia Dox An Ied - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Current consumption [A]: 6.6 - Fuse [A]: 16 - Power [kW]: 3.0 - Transport dimensions: 4200mm x 1200mm x 2450mm (l x w x h) - Transport weight [kg]: 600kg - Transport packages [pcs.]: 0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2000, Sawblade tiltable +/- 45 ° Length of the rolling table 2800 mm cutting width 1440 mm Motor output 7,5 kW Cutting height 150 mm Saw blade diameter 450 mm weight of the machine ca. 1200 kg range L-W-H 3,2 x 3,4 x 1,7 mm Nlsdpfoxcg Hgjx An Ied

Condition: excellent (used), Year of construction: 2000, roll diameter 420 mm throat 400 mm workpiece height 280 mm Nlodpfx Asxcp Sfjn Iod saw band length 3200 - 3400 mm table - swivable +/- 20 ° table surface area 600 x 600 mm table - tiltable +/- 45 ° total power requirement 1,7 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 0,7 x 1,9 m

Condition: used, Unloading at the bottom 2 engines (2 x 37 kW) dimensions (lxwxh): ± 7.300 x 2.280 x 2.600 mm dimensions bowl (lxwxh): ± 4.500 x 2.120 x 1.350 mm Nedpfx Anoziab Dj Iold suitable for steam injection (double-walled)

Condition: used, Heavy-duty, high-performance automatic band saw with a horizontally, parallel-traveling saw band, built 2005, for cutting round, square and flat material as well as tubes and profiles in all grades — especially tool steels and hard-to-machine materials (titanium, Hastelloy, Inconel, etc.). Cutting range: round ø430 mm, square/flat H×W 430×430 mm, clamping range 0–430 mm. Saw unit in steel-mineral-cast composite construction with KASTO TrumGuides vibration damping. Saw drive 15.0 kW (14.0 kW at the wheel), connected load 25.0 kW, stepless cutting speed 30–300 m/min, saw feed 0.5–300 mm/min. Automatic NC material feed via ball-screw drive, hydraulic clamping vises on both sides, hydraulically actuated and electronically monitored band tension, self-adjusting chip removal brush, automatic cutting-gap widening and automatic zero-positioning of the first cut. Fitted with a plate belt conveyor and KASTO EasyControl. Delivered WITHOUT infeed magazine — sold without the existing chain magazine. Nlodpfxszpb Eqe An Ijd

Condition: used, Profile cold circular saw Manufacturer: Trennjäger Type: PMC 12-F Year of manufacture: unknown Circular saw blades from 760 mm (30") to 910 mm (36") Includes roller conveyors 23726 Nedpfx Anoznvdlo Isld

Condition: used, Year of construction: 1983, Second-hand machine Year of manufacture: 1983 Features and technical specifications: with a saw blade that can be tilted to 45° Sliding carriage and swivel arm Machine table: 700 x 680 mm Height to top edge of table approx. 900 mm Circular saw blade height adjustment: approx. 55 mm Max. circular saw blade diameter: 315 mm Circular saw blade bore: 30 mm Maximum cutting height with a 315 mm saw blade: approx. 85 mm Nlsdpsznk Dasfx An Isd Cutting width approx. 400 mm Maximum cutting length in front of the saw blade when using the sliding carriage: approx. 925 mm Dimensions of the sliding table: 780 x 340 mm Motor: 3 kW – 2,870 rpm Saw shaft speed approx. 4,600 rpm Weight approx. 216 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1989, functionality: fully functional, Kasto HBA 360 AU bandsaw incl. roller conveyor Cutting range: 360 mm Saw blade dimensions: 5334 x 32 mm Nsdpsyxxfisfx An Iold Length: 2310 mm Width: 2600 mm Height: 1700 mm Weight: 2600 kg We are available for further questions.

Condition: excellent (used), combined circular saw / milling machine / slot mortising machine - 30mm spindle Nsdpfx Aewzyx Asn Ijld

Condition: used, Year of construction: 2016, total length: 6,400 mm, total width: 1,500 mm, total height: 1,700 mm, Price: On request - Year: 2016 - Documentation available: No - CE certificate present: No - Max. cutting length [mm]: 3200 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 350 Nlodpjyvh Rvjfx An Ijd - Arbor saw blade diameter [mm]: 30 - Dust extraction nozzle diameter [mm]: 120 - Spindle speed: - └ Max. spindle speed [rpm]: 4000 - Voltage [V]: 400 - Current consumption [A]: 18.5 - Fuse [A]: 25 - Transport dimensions: 6400mm x 1500mm x 1700mm (l x w x h) - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2003, Saw blade diameter: 350 mm, bore diameter: 30 mm, motor: 2 kW, speed: 3800 rpm. Extraction connection diameter: 95 mm. Weight: approx. 105 kg without stand. Cutting width at 90°: 430 mm, at 45°: 300 mm. Cutting height: 135 mm. Hydraulic return brake. Without stand and roller conveyors. Nsdpfx Ajyw Tzien Isld

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, cutting height (max.): 400 mm, Offer for automatic bandsaw SBA 361: P-CNC-FORTE-SBA361 Dear Ladies and Gentlemen, We are pleased to be able to offer you our high-quality FORTE SBA 361 automatic band saw from 2002. The machine is in used condition. Technical data - Maximum workpiece diameter: 400mm - Feed roller conveyor - Automatic with bar feed - Space requirement approx. (height/length/width): 270 cm / 500 cm / 300 cm Njdst I Emvjpfx An Isld Price net 26.000 € VHB

Condition: excellent (used), Year of construction: 2016, operating hours: 4,742 h, "RSA High-Performance Sawing, Deburring, Cleaning, and Drying Center" for Steel Tubes The processing center consists of: 1) RSA Precision High-Speed Saw RASACUT SC 3000 with bundle loader 2) RSA transfer system between the RSA Precision High-Speed Saw RASACUT and the RSA Deburring System RASAPLAN XY 3000 3) RSA Deburring System RASAPLAN XY 3000 4) Extraction system/wet separator for the RSA Deburring System RASAPLAN XY 3000 5) RSA Cleaning System RASACLEAN ET 3000 6) RSA Drying System TURBODRY Bundle loader extended for tubes up to 6,200 mm TECHNICAL DATA Tube diameter: 6 mm to 55 mm Wall thickness: 1 - 6 mm Bar weight: max. 10 kg/m Material: steel Magnetism: max. 3 Gauss Output length: 6,200 mm Sawable lengths: 150 - 3,000 mm Restriction: Ø 6 – 7.9 mm max. length: 1,200 mm Ø 8 – 9.9 mm max. length: 1,500 mm Ø 10 – 12 mm max. length: 2,000 mm Length tolerance: Ø 6 - 49 mm +/- 0.2; Ø 50 - 55 mm +/- 0.25 SAW BLADE DATA Saw blade diameter: max. 315 mm Bore: 40 mm Auxiliary holes: 4 x 12 mm Pitch circle: 64 mm Nlodey E Iypspfx An Ijd NEW PRICE: €390,000

Condition: good (used), Year of construction: 1992, Altendorf F45 Dgit X format saw in fully functional condition. The digital display for the parallel fence is still present. The measuring rail and sensor are included. The digital display for the miter angle is fully functional. Power: 5.5 kW (main motor) & 0.75 kW (scoring saw) Slider: 280 cm Saw blade: max. 350 mm Nlsdpfxeznipbo An Ijd Parallel fence: up to 1,250 mm Includes an additional auxiliary fence (foldable) The saw was manufactured in 1992 and comes from a training workshop. Shipping via a freight forwarder is possible after consultation. #8504