Used Sales Tents for sale (25,555)

Condition: ready for operation (used), Year of construction: 2013, Nominal width: 3000mm, Working width range: 600mm-2800mm, Layers: 1, Number of chambers: 6, Heating system: Gas, Air supply: top/bottom, Max. working speed: 100m/min, Chain arrangement: horizontal, Cooling cylinders: 2, Padder: twin cylinder Matex 6000, Exhaust fan: 1, Documentation available, On site inspection is possible. Djdjyhqb Tjpfx Ahgjkp

Year of construction: 1992, condition: ready for operation (used), Working width: 1200-2350mm, with Coating Machine JAKOB WEIß, six 1500kWh burner, was overhauled in 2007. Djdpfx Ahegny Ugjgjkp

Condition: good (used), Features: • Accurate, Rapid, Easy to Use • No Cell Alignment or Calibration • Temperature Control, 5 - 75° C • Customizable Reports, SP Charts, Two-Parameter Plots, Graphical Overlays Dkedpfx Ahjupafvogep • Integrated Computer The Brookhaven ZetaPlus is designed for rapid, accurate and, above all, straightforward determination of zeta potential and electrophoretic mobility of fine particles from around 5nm up to about 50µm. Its principle is the measurement of the Doppler shifted frequency spectrum of scattered laser light using a known reference frequency for maximum accuracy. The key attraction of the ZetaPlus is its simplicity of operation due to the innovative design of its sample cell – electrode assembly. Using low cost, disposable cuvettes and simple "plug-in" electrodes, it completely eliminates the problem of electroosmosis – for all samples. With this system, cell alignment with respect to the laser beam is no longer critical and therefore requires no periodic checking or adjustment. Bubble-free filling of the cell is easy and fast and the volume of sample required is minimal. Sample temperature is accurately controlled by a fast response dual-Peltier system operating in the range 50C to 750C. For most common liquid media, necessary physical constants are all pre-programmed throughout the temperature range. pH can be read directly into the ZetaPlus software. Zeta potentials can be automatically plotted against pH or any other variable of the user’s choice, such as surfactant or additive concentration.

Condition: good (used), Heavy-duty casters, heavy-duty wheels, tires, heavy-duty double swivel casters, heavy-duty double fixed casters -Manufacturer: Tente, heavy-duty swivel casters, 4 pieces -Features: Ball bearings, rollers type 07/15 Wheel dimensions: 200 x 80 mm, 2 pieces per stand Dkjdpoih S Ngsfx Ahgsp -Mounting plate: Dimensions see photos -Price/Sale: complete -Dimensions each: 410/345/H290 mm -Total weight: 360 kg, 90 kg/pc.

Condition: good (used), Year of construction: 2022, functionality: fully functional, For sale: 1 x lightly used tent hall from HallGruppen: A tent hall, 40 meters long x 2 meters wide, with 2 doors at one end + 5 small doors (requires self-dismantling). Internal wall height 6 meters and peak height 8.2 meters. External wall height 7 meters and peak height 9.6 meters. Eurocode wind load: 24 m/s, terrain class I Anchoring with ground stakes or other method Dedpfx Ahezgcclogskp Weight of fabric: 900 g/m2 Fire class of fabric: B-s2,d0 Consequence class: CC1/KK1 Sales only to businesses (B2B) – price is net for export or + VAT – viewings welcome in Denmark – subject to errors and omissions Information about the manufacturer: “ Hallgruppen is a well-known supplier of tent halls and temporary structures, especially in the Scandinavian region. The company specializes in the supply of tents, halls, and related structures. Here are some key aspects of Hallgruppen's tent halls: • Large projects: Hallgruppen, for example, built a 30,000 square meter tent camp for a NATO exercise in Inner Troms. • Applications: The tent halls are used for various purposes, including temporary storage, accommodation, and events. • Product range: The range includes robust tent and hall solutions, including specialized constructions such as a 40x20 meter tent hall. • Market position: In addition to the Scandinavian region, the company is also active in the Baltic countries (Hallgruppen Baltics, SIA). Hallgruppen offers customized solutions for temporary space requirements in various industries.

Condition: good (used), Year of construction: 2024, functionality: fully functional, For sale: Dkodpfx Aszfaqqjhgsp 1 x tent hall, 120 x 18 meters, manufactured by HallGruppen from Norway. New price without side door: 1.2 million euros. Interior height: approx. 18 meters. Disassembly to be carried out by the buyer in Denmark (we can recommend a company for disassembly). The fabric needs to be reordered (we may be able to provide an insulated fabric). Inspection welcome. See video in this advertisement (still with insulated fabric). More information and more videos available upon request.

Condition: ready for operation (used), functionality: fully functional, conveyor belt width: 600 mm, working width: 600 mm, Complete puff pastry line RIJKAART / RINC 600mm | Operational, Tested Dsdpfjzivw Uox Ahgjkp For sale: a complete, industrial laminating line for the automated production of puff pastry, semi-puff pastry, and Danish pastry, manufactured by the renowned Dutch brands Machinefabriek C. Rijkaart bv / Rinc Europe. REASON FOR SALE: The line was purchased from a distributor and fully prepared for operation under a specific production contract. Due to reasons beyond our control, the contract was not finalized. The machine has not been used in continuous operation and is 100% free of any legal defects. TECHNICAL CONDITION AND SERVICE: The machine underwent a full technical inspection after purchase. All components requiring attention have been replaced with new ones – including new main bearings and some conveyor belts. The line has been successfully connected and mechanically tested. I have a current video recording of the start-up tests (available immediately via WhatsApp). TECHNICAL SPECIFICATIONS: Working width of the belt: 600 mm (Euro standard – ideal for baking trays) Estimated capacity: approx. 400 kg – 1000 kg of dough per hour (depending on the thickness of the sheet and the product) Construction: Stainless steel / acid-resistant steel with the legendary, robust Rijkaart mechanics (very easy to maintain, without problematic PLC electronics). THE SET INCLUDES: Automatic dispenser / pump for margarine and fat Triple station of independent calibrating rollers (multiroller) for precise dough stretching Original, central Rinc electrical and control cabinet with a clear synoptic panel Two-level conveyor / roller feeder Complete set of 600 mm conveyor belts LOGISTICS AND PICK-UP: The main feeding section is located in the production hall, and the remaining components are safely stored under a sealed industrial tent. Dismantling and transport are the responsibility of the buyer. We provide free assistance and loading with a forklift on-site. TERMS OF SALE: Sale only to companies – we issue a full VAT invoice. Starting price: PLN 299,000 net (negotiable within reason).

Condition: used, For sale: Salmatec Maxima 700 pellet press in full working condition, installed in a Rematec container with electrical cabinet and a tent shelter. Capacity – up to 3 t/h. The line includes: Dedjit I Rtopfx Ahgekp - Press and hammer mill: Salmatec – reliable German quality with high efficiency and durability. - Conveying and dosing equipment: Rematec – robust and precise material handling at every stage. - Additional equipment: cyclones, sieves, cooler, control cabinet, etc. - Tent shelter. Key advantages: - High production capacity – up to 3 t/h. - High-quality European manufacturer components. - Suitable for professional pellet production from wood biomass, agro-biomass or other raw materials. - Fully operational line – demonstration possible. - Available immediately. Dismantling and transport are to be arranged by the buyer. We can recommend a company to assist with this process. The equipment can be inspected in full working order in Sweden. All foundation drawings and DWG files are available. Price: EUR 650,000

Year of construction: 2025, condition: new, New FERBERG mobile loading ramp from the manufacturer The FERBERG mobile ramp from the manufacturer is used in warehouses for loading and unloading containers and vehicles using forklifts, carts, etc. The loading dock ramp is a bridge between ground level and freight transport. Provides direct access for the loader to the vehicle body. Warranty 18 months. Having a CE Standard. Delivery throughout the country. Flexible system of discounts. Specifications: - Load capacity of mobile ramp – 8000, 12000, 16000 kg; - Total length – 9400, 11900, 13400 mm; - Carriageway width – 2000, 2500 mm; - Working height – 900-1750 mm; - Carriageway surface – zinc-coated anti-skid grating; - Height adjustment – using a hydraulic pump; - A special tow pole is used to move the truck loading ramp; - Color – grey. Complete set: - Mobile ramp – 1 pс; - Hand pump (made in Italy) – 1 pc; - Tow pole for transporting the ramp with a forklift – 1 pc; - Solid wheels – 2 pсs; - Rubber wheel chocks – 2 pсs; - Chains with carbine hooks – 2 pcs. Additional options: SL – Safety legs adjustable in height HR – Protective removable handrails TC – Tent cover CLR – Another color EHP – Electric (220V) hydraulic power station with a control panel EHBP – Electric (12V) hydraulic station with a battery pack Dkedpfeqxrhcsx Ahgep Find out more on our website. The photos shown are for illustrative purposes only. For detailed sales information, please contact the manufacturer.

Year of construction: 2025, condition: new, Mobile loading ramps AUSBAU from the manufacturer Standard models with 6, 8, 10 and 12 tons load capacity. We offer loading ramps from the manufacturer in any dimensions you need. They save the loading / unloading time of the truck / wagon. You can move them over the enterprise territory with the help of installed automotive wheels. Mobile loading yard ramps AUSBAU operate in any weather conditions. Warranty: 18 months. World-wide delivery. Finished and made-to-order. CE Standard. Read more about loading ramps on our website. id: ISGhNU Technical characteristics: ● Load of ramp, kg - 6000 / 8000 / 10000 / 12000 ● Total length of the ramp, mm - 9000 / 9500 / 10500 / 11200 / 12000 / 13000 ● The total width of the ramp, mm - 2130 ● Width of riding surface, mm - 2000 ● Length of sloping part, mm - 8000 / 8500 / 9200 / 9900 ● Loading stage length, mm - 300 ● Min. working height, mm - 900 ● Max. working height, mm - 1550 / 1750 ● Height of the hand railings, mm - 180 ● Number of entry bridges, pcs - 2 ● Number of wheels, pcs - 2 ● Wheels - solid ● Material - S235 ● Riding surface - zinc-coated anti-skid grating ● Components - rubber wheel chocks – 2 pcs, tow pole – 1 pc, set of chains on the ramp – 7 pcs, manual hydraulic pump with handle – 1 pc. Additional options: ● electric hydraulic station on the ramp; ● three-sided unloading mobile ramp. Supplied with safety legs; ● safety legs adjustable in height, installed on ramp; ● tent cover over the ramp; ● additional protective hand railings, 1100 mm height; ● additional pair of wheels: 4 instead of 2; ● choosing a different color (standard color is red). Mobile ramp operating principle: The forklift lifts the edge of the ramp (inserting the fork into the rigid tow pole) and drives it to the truck. Using a hydraulic pump, set the required height of the ramp (from 900 mm to 1750 mm). Ramp complete with wheel chocks and chains. Chocks fix the ramp. Chains securely fasten the mobile loading ramp to the truck. Then the loaded forklift moves up the loading dock ramp and drives directly into the truck or container. Djdpsiqk E Tefx Ahgokp The photos shown are for illustrative purposes only. For detailed sales information, please contact the manufacturer.

Condition: used, A fully assembled and working pellet production line with a capacity of up to 3 tons per hour Dsdpfxsx S Egmo Ahgekp is for sale. The factory is little used – only 16,000 tons were produced, it is in very good technical and visual condition. Ideal for professional production of pellets from wood biomass, agrobiomass or other raw materials. No additional premises are required for the installation of the plant, the pellet press is already built into the container. The line includes: Press and mill: Salmatec Maxima 700 – reliable German quality with high efficiency and long-term stability. Transport and dosing equipment: Rematec – robust and accurate material supply at all stages. Tent shelter. Additional equipment: cyclones, sieves, cooler, control panel, etc. All DWG files, drawings for the foundations of the equipment are available. Main advantages: Large production capacity – up to 3 t/h. High quality components from European manufacturers. Ability to adapt to usage of different raw materials. Line in working order – can be demonstrated in operation. Available immediately.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 7853, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain TNC 426 C, No minimum price – guaranteed sale to the highest bidder! Loading can be carried out by the seller for €750! TECHNICAL DETAILS Travel in X-axis: 4,000 mm Travel in Y-axis: 1,200 mm Travel in Z-axis: 2,000 mm Spindle type: ISO 50 Spindle power: 50 kW Spindle speed: up to 3,000 rpm Table length: 5,000 mm Tool changer: 30-position ATC MACHINE DETAILS Control system: Heidenhain TNC 426 C Headstock Swiveling: Automatic Increment: 1 degree / 2.5 degrees / stepless Dimensions & Weight Dimensions (L x W x H): 9,000 mm x 5,000 mm x 5,000 mm Weight: 35,000 kg EQUIPMENT Hydrostatic guideways in all axes Dkjdpfx Ahozdtxfegjp Tool holders Coolant preparation/filtration system Chip conveyor Cooling system, manufacturer: Deerosdassi Control cabinet system Note: The machine has already been professionally disassembled and is in storage.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, controller model: SIEMENS SINUMERIK 840D SL, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Djdpfx Ahszd Afzjgekp Working area: 3,000 x 1,500 mm Laser power: 4,000 W Sheet thickness, mild steel max.: 20 mm Sheet thickness, stainless steel max.: 15 mm Sheet thickness, aluminum max.: 10 mm Lens cutting head diameter: 250 mm MACHINE DETAILS Control system Control model: SINUMERIK 840D SL Screen: 17" touch color screen Voltage: 400 V Frequency: 50 Hz Electrical standard: IEC EQUIPMENT Closed machine frame with integrated laser unit Torque drive in combination with linear direct drives CO₂ laser TruFlow 3200 with optimized standby mode High-frequency excitation Installation plans and installation conditions, 2 copies Motion unit for highly precise machining Closed beam guidance Single cutting head strategy Cooling unit Automatic pallet changer in the longitudinal direction Wide longitudinal conveyor belt Ergonomic control panel with touch color screen Work area lighting Position laser diode Spray device PierceLine FocusLine NitroLine PlasmaLine Transport and assembly device Maintenance-free turbo radial blower Gas mixer integrated Laser control TASC Laser power control Laser logbook function Lens cutting head with 250 mm lens Universal cutting device with bus connection LensLine with condition monitoring ControlLine: Height control and sheet edge detection Easy operation Simple workshop programming Advanced workshop programming Fast re-production Automatic shut-off ContourLine FastLine FlyLine Microweld Production plan AdjustLine Teleservice via internet USB interface RJ-45 network connection CE marking Light barriers Multi-chamber extraction system Compact filter unit Machine enclosure with Makrolon panels TruTops Laser initial license TruTops Laser secondary license TruTops Tube follow-up license Documentation TruLaser 3030 Documentation, 2 copies, 1 x paper / 1 x CD Note: The operating hours can be found in the last image.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 1,752 h, functionality: fully functional, machine/vehicle number: 2052592, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 813 mm, table load: 4,536 kg, spindle speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,626 mm Travel range Y-axis: 1,270 mm Travel range Z-axis: 813 mm Table length: 1,626 mm Table width: 914 mm Table load: max. 4,536 kg Spindle speed: 6,000 rpm Drive system: geared head Torque: max. 610 Nm at 500 rpm Power: max. 22.4 kW Thrust force X/Y axis: max. 24,910 N Thrust force Z axis: max. 33,362 N Rapid traverse: max. 13.7 m/min Cutting feed rate: max. 12.7 m/min Tool diameter with full tooling: max. 102 mm Tool diameter with free adjacent positions: max. 254 mm Dkodpfx Ahozd Tcdogsp Tool-to-tool time: 10.3 s Chip-to-chip time: 12.6 s MACHINE DETAILS Dimensions (L x W x H): 3,660 x 3,880 x 3,190 mm Operating hours (see image) Spindle hours: 1,752 h Servo hours: 15,789 h

Condition: used, Year of construction: 2020, power: 6 kW (8.16 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Plate thickness min.: 8 mm Plate thickness max.: 50 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Adhesive system: EVA hot melt adhesive The machine consists of 4 processing units as follows: Unit 1 Pre-milling unit Number of pressure rollers: 3 Adhesive pot for EVA hot melt adhesive Unit 2 Edge processing unit: Capping Number of motors: 1 Unit 3 Edge processing unit: Fine milling for flush trimming and rounding Number of motors: 2 Unit 4 Dkedpfx Aezf Ircehgsp Processing unit: Glue application blade MACHINE DETAILS Total installed power: 6 kW The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with descriptive content. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8571

Condition: used, Year of construction: 2014, power: 12 kW (16.32 HP), edge thickness (max.): 8 mm, feed rate X-axis: 10 m/min, plate height: 40 mm, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Feed rate max.: 10 m/min Workpiece height max.: 40 mm Workpiece length min.: 200 mm Workpiece width min.: 80 mm Edge thickness min.: 0.3 mm Edge thickness max.: 8 mm Number of processing units: 5 Number of panel splitting/milling units: 1 Number of edge processing units: 4 Gluing system: EVA hot melt adhesive The machine consists of the following processing units: Panel splitting/milling unit Unit: Pre-milling unit Edge processing unit 1 Processing unit: Trimming Number of motors: 1 Edge processing unit 2 Processing unit: Fine milling for flush trimming and rounding Dkedozf Id Sjpfx Ahgjp Number of motors: 2 Edge processing unit 3 Processing unit: Corner rounding Number of motors: 1 Edge processing unit 4 Processing unit: Glue application blade MACHINE DETAILS Total installed power: 12 kW EQUIPMENT CE marking Pressure roller Pressure with idler rollers Panel support guides Edge roller magazine Glue pot for EVA hot melt adhesive Infeed roller for pressing the edge 4 pressure rollers Corner rounding unit The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External reference: 8570

Condition: used, Year of construction: 2011, cutting height (max.): 430 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. cutting height: 430 mm EQUIPMENT CE marking 1 saw blade unit (tilting) The machine is sold and delivered in its current and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents for descriptive purposes. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. Dksdpszf H Szofx Ahgsp External reference: 8580

Condition: used, Year of construction: 2012, power: 5.9 kW (8.02 HP), rotational speed (max.): 9,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dkjdpszf H R Refx Ahgop Speed: 9,000 rpm Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected power: 5.9 kW EQUIPMENT Number of milling heads: 1 Tilting spindle The machine is sold and delivered in its actual and legal condition (“as is, where is”), based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8579

Condition: used, Year of construction: 2013, power: 5.9 kW (8.02 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected load: 5.9 kW EQUIPMENT Tilting spindle Number of milling heads: 1 The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 8578 Dkjdjzf H Nyopfx Ahgjp

Condition: used, Year of construction: 2010, tool diameter: 210 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dedpozf H Iijfx Ahgjkp Working spindle length: 125 mm Max. tool diameter: 210 mm MACHINE DETAILS Motor power: 5 kW EQUIPMENT Tilting spindle Milling unit: 1 Number of motors: 1 The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8577

Condition: used, Year of construction: 2019, cutting width (max.): 3,000 mm, saw blade diameter: 300 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw unit 1 (tilting) Motor power: 6 kW Djdpfezf H Hrsx Ahgekp Saw unit 2 (tilting) Motor power: 0.75 kW Working width max.: 3,000 mm Saw blade diameter: 300 mm MACHINE DETAILS Connection power: 7 kW The machine is sold and delivered in its current and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents, which are for descriptive purposes only. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8572

Condition: ready for operation (used), Year of construction: 2019, operating hours: 5,991 h, functionality: fully functional, machine/vehicle number: 10147A, turning length: 320 mm, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: FANUC System 32i-B, number of axes: 9, No minimum price – guaranteed sale to the highest bidder! The machine will be cleaned and ready for collection from July 31st! An inspection while the machine is powered on is possible until July 24th! TECHNICAL DETAILS Turning length: 320 mm Spindle speed (max.): 8,000 rpm Spindle speed (min.): 200 rpm Bar passage: 32 mm MACHINE DETAILS Control system: FANUC System 32i-B Total weight: 3,600 kg Dkjdpfx Ahjzfiipogjp Operating hours (as of May 6, 2026) Operating hours: 9,243 h Machining time: 5,991 h EQUIPMENT Fully programmable B-axis Total of 9 axes Loader magazine: FMB/turbo 3-36 HD/SFB-310 ECO (with high-pressure unit) Fire extinguishing system: Kraft & Bauer/FB 703 Chip conveyor: Hakusan/EKC 2052HP Counter-spindle coupling incl. pneumatic ejector B-axis swivel angle 135 degrees, fully programmable Pressure booster pump 16 bar incl. double cartridge filter 2 tools beside the counter-spindle for deep-hole drilling 8 driven tools on the B-axis carrier 4 driven tools on the rear side 1 driven angle head 90 degrees for the rear side 4 fixed tool spindles on the rear side

Condition: ready for operation (used), functionality: fully functional, suction capacity: 20,000 m³/h, production capacity: 1,300 unit/h, No minimum price – guaranteed sale to the highest bidder! The hammer mill (year of manufacture 2021) has only approximately 2 operating hours! The system is suitable for straw, hay, alfalfa, compost, wood, and other agricultural raw materials! TECHNICAL DETAILS Capacity (material-dependent) max.: 1,300 kg/h MACHINE DETAILS Hammer mill power: 75 kW Pellet press: 75 kW, without control unit Bale shredder: 35 kW, including control unit Dust filter capacity: 20,000 m³/h, including control unit Operating hours Entire line: approx. 1,500 h Hammer mill: approx. 2 h EQUIPMENT Pellet press Conveyor belt Elevator Pellet cooler with screen Buffer tank with discharge 2 cyclones with rotary valve airlock Fan for cooler extraction New die Various used spare parts 10 m feed table for the bale shredder Bale shredder, including control unit Dodpfszgf A Ujx Ahgokp Hammer mill, including control unit Centrifugal separator Big bag station for dust filter Dust separation technology: EU-ATEX Directive 2014/34 Positive dust explosion assessment from 2023 Note: The line has already been dismantled and is ready for loading.

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, machine/vehicle number: 71257, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Measuring volume: 3,000 mm Accuracy: 0.07 mm MACHINE DETAILS Dimensions & Weight Installation dimensions L x W x H: 1,000 x 500 x 1,000 Weight: 30 kg Dkjdpfezhuylox Ahgop SCOPE OF DELIVERY Laptop and software (completeness not guaranteed) Transport case Note: The red base on which the laptop is placed is not included in the offer.

Condition: repair required (used), Year of construction: 2021, functionality: limited functionality, machine/vehicle number: 958-186, overall weight: 2,200 kg, working width: 60 mm, resolution (max.): 1,200 dpi, working length: 90 mm, production capacity: 150 unit/h, No minimum price – guaranteed sale to the highest bidder! Note: The print heads (white heads) need to be replaced. The machine is therefore offered as requiring repair. Otherwise, the machine is in very good condition and has only been used for a few operating hours. It can be inspected on-site while powered up. TECHNICAL DETAILS Maximum print resolution: 1,200 dpi Production capacity for light-colored textiles max.: 150 pieces/hour Production capacity for dark-colored textiles max.: 110 pieces/hour Maximum printing area: 60 x 90 cm Printable materials: Cotton, polyester, cotton-polyester blends, lycra, viscose, silk, leather, denim, linen, wool The machine is supplied with 6 printing pallets for various applications, which are composed as follows: 2 x Standard (405 mm x 505 mm) 1 x Children (265 mm x 330 mm) 1 x Hoodie Full Size/Zipper (400 mm x 500 mm) 1 x Tote Bag (260 mm x 270 mm) 1 x Dual Baby Pallet (130 mm x 180 mm) MACHINE DETAILS Operating system: Windows 7 Maximum power: 1 kW Voltage: 230/400 or 208 V Frequency: 50 / 60 Hz Dksdpfx Ajzdy D Iehgsp Air pressure: 6–8 bar Operating temperature: 18–30 °C Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,300 x 1,700 mm Machine weight: 2,200 kg EQUIPMENT Integrated humidification system Integrated backup battery system Bulk ink system for 4-liter ink containers CE certified FCC compliant