Used Sales Counter for sale (27,551)

Condition: used, mileage: 20 km, power: 125 kW (169.95 HP), first registration: 08/2026, fuel type: diesel, overall weight: 3,300 kg, color: black, gearing type: automatic, number of seats: 9, total length: 5,450 mm, total width: 2,032 mm, total height: 1,994 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Internal number: 4307.NW26.TS33272 ---- Errors and prior sale excepted! SPECIAL EQUIPMENT * AGM dual battery H8 * Exterior mirrors, electrically adjustable, heated, and foldable - with integrated turn signals * Heated windshield * Rear air conditioning * 2-zone automatic climate control - with automatic temperature control, separately adjustable for driver and passenger side - auxiliary heater, electric * Additional fuel connection - An additional fuel connection provides a fuel line with a connector for easier connection of auxiliary devices, such as retrofitted heaters. * Fuel tank 70 l * Paint: Metallic * Steering wheel, Sensico in leather look * Matrix-LED headlights, adaptive - LED low beam including all-weather light - LED high beam, glare-free - LED daytime running lights including integrated LED turn signals at the front - LED cornering light, static - Speed-dependent headlight range adjustment - LED taillights * Technology Package 6 (A and D transmissions) - Audio system, 13-inch multifunction display, Ford SYNC 4 including navigation. Blind Spot Assist including CTA, rear collision warning, Pre-Collision Assist, camera- and radar-based. Driver drowsiness warning. Lane Keeping Assist, lane departure warning, lane change assist, lane centering. Traffic sign recognition, wrong-way driving warning, parking pilot system front and rear. * Adaptive cruise control with Stop & Go * All-round camera system Bledpeyy T D Njfx Aa Ion * Ford audio system with 13-inch multifunction display and Ford SYNC 4 including navigation - Digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - FordPass Connect - Integrated control panel and audio remote control on the steering wheel - Ford SYNC 4 with AppLink and touchscreen - AppLink (wireless) - Amazon Alexa Built-in voice assistant - Navigation system * Sliding door with power assist - supported manual closing of the sliding door * Seat Package 7 - Driver's seat, 4-way manually adjustable - Single passenger seat, 2-way manually adjustable - Lumbar support for driver - Seat heating for driver and passenger - Driver's seat with adjustable armrest inside - Passenger seat with armrest inside - Side airbags, left and right - Head/shoulder airbags, front, left and right - Fabric upholstery Plus Style, seat center section in Black Onyx, rest in Ebony * Heat-insulating glass, medium tint of side windows from the B-pillar OTHER EQUIPMENT * 2-stage unlocking for passenger compartment * ABS * All-wheel drive * Exterior mirror housings made of plastic, black * Floor covered with rubber, full vehicle length * Roof, flat * Roof console * Diesel particulate filter with SCR * Double-wing rear door * Rev counter * Third brake light (with LEDs) * ESP * Vehicle modem - WLAN hotspot 5G modem - Information about the current status or location of the vehicle as well as control of selected vehicle functions via the smartphone with the Ford app - Current traffic information in real time (in conjunction with the navigation system) - WLAN hotspot (up to 5G/LTE, for up to 10 mobile devices) * Power windows, front * Parking brake, electric * Transmission: 8-speed automatic * Glove compartment with lid * Rear window, heated * Rear window wiper * Interior lighting in the passenger compartment * Interior lighting, front * Load space lighting (LED) * Center console, small * Driver drowsiness warning * Emergency assistance * Radio accessories: 8 loudspeakers * Tire repair kit * Tire pressure monitoring system * Wheels: Steel 6.5 J x 16 m. 215/6

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 27,426 h, load capacity: 5,500 kg, lifting height: 5,630 mm, fuel type: gas, mast type: simplex, construction height: 3,800 mm, fork carriage width: 1,560 mm, fork length: 1,770 mm, empty load weight: 8,800 kg, total length: 3,400 mm, drive type: Treibgas, construction width: 1,420 mm, LPG Forklift Load center of gravity: 600 Fork width: 150 mm Fork thickness: 60 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 3.00-15 Rear tires type: Superelastic Rear tires size: 28x9-15 Description: In addition to this Hyster model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire-purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this H5.5FT. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom builds for forklifts weighing 8 tons and over. We're happy to display your vehicle for consignment sale. Sideshift, fork positioner, Bedpfxswgp Nuo Aa Ioln Heating, full cab,

Condition: used, Year of construction: 2004, Overview  This low-pressure vacuum filler was manufactured in 2004 by MBF. The machine was in use until 2017 and was fully functional at the time of shutdown. It was replaced due to the increased demand for carbonated products, which required a different filling principle (counter-pressure). Since then, the machine has been stored dry and protected, with only minor dust present. It is promptly available for sale. Technical data  - Capacity: - 6,000 bph (1.0 l bottles) - 7,000 bph (0.75 l bottles) - Bottle diameter: 55–120 mm (via steplessly adjustable in/outfeed stars) - Bottle height: 150–370 mm - Number of filling valves: 36 - Filling principle: Low-pressure vacuum filling - Running direction: Left to right Bledpfx Aaswiu Nle Ion - Filling valve type: Electropneumatic - Special features: - Programmable bottle parameters with automatic adjustment for bottle height and fill level - Hot filling capable with auto shutdown at temperature deviation - Automatic speed adjustment based on bottle infeed - CO₂ pre-flushing of bottles - Inert gas overlay possible in the filler bowl - Auto fill level control depending on product temperature - Auto wine changeover via CIP tray - CIP dummy bottles and semi-automatic cleaning program - Remote maintenance modem - Complete documentation (spare parts list, wiring diagram) - Central electric fill level adjustment Scope of Delivery  - MBF Fillmatic 36LV Filler - CIP dummy bottles - CIP tray - Tele-Modem - Complete documentation (electrical and spare parts)

Condition: used, functionality: fully functional, Year of construction: 2002, operating hours: 10,539 h, load capacity: 4,000 kg, lifting height: 6,500 mm, fuel type: gas, mast type: simplex, construction height: 4,030 mm, fork carriage width: 1,315 mm, fork length: 1,600 mm, empty load weight: 7,550 kg, total length: 4,120 mm, drive type: Treibgas, construction width: 2,400 mm, Sideloader Bodpfov U Erpjx Aa Ieln Load center of gravity: 800 Fork width: 120 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 27x10-12 Rear tires type: Superelastic Rear tires size: 27x10-12 Description: In addition to this Baumann model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this HX40/16/65. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and over. We would also be happy to display your vehicle for consignment sale. Heating, full cab, Olatform height: 850 mm

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 12,796 h, load capacity: 6,000 kg, lifting height: 4,000 mm, free lift: 2,050 mm, fuel type: diesel, mast type: duplex, construction height: 2,950 mm, fork carriage width: 1,460 mm, fork length: 1,600 mm, empty load weight: 9,890 kg, total length: 5,000 mm, drive type: Diesel, construction width: 2,440 mm, Sideloader Load center of gravity: 800 Fork width: 180 mm Fork thickness: 60 mm Mast type: Duplex Bljdsv U Ezdspfx Aa Ion Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 3.00-15 Rear tires type: Pneumatic Rear tires size: 3.00-15 Description: In addition to this Bulmor model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website - sago-online. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even without you purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this DFQ 60/16/40ZS. P.S.: Our forklift workshop specializes in repairs, maintenance, overhauls, and custom construction for forklifts weighing 8 tons and above. We would also be happy to display your vehicle for consignment sale. NIVO fork Heating, full cab, full free lift, Platform height: 1050 mm

Condition: ready for operation (used), functionality: fully functional, operating hours: 30,604 h, laser hours: 21,552 h, laser power: 2,000 W, sheet thickness steel (max.): 16 mm, sheet thickness aluminum (max.): 5 mm, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 250 mm, No reserve price – guaranteed sale to the highest bidder! Regular maintenance: Fully serviced by LVD every 6–12 months TECHNICAL DETAILS Control: Fanuc 160i L Sheet size: 2,500 mm x 1,250 mm Travel paths: 2,600 x 1,300 x 250 mm Laser Laser power: 2 kW / 2000 watts Laser model: GE-Fanuc RF CO2 Laser Maximum cutting thickness (steel): 16 mm Maximum cutting thickness (stainless steel): 6 mm Maximum cutting thickness (aluminium): 5 mm Optics & focusing Quick-change lenses: 5” and 7.5” Focusing head: manual MACHINE DETAILS Parts counter: 193,870 Power-on hours: 77,278 h Operating hours: 2,320 h Cutting hours: 21,552 h Laser power-on hours: 30,605 h Machine dimensions: 4,610 x 4,970 x 2,200 mm Weight: 11 t EQUIPMENT - Pneumatic ball support system - Capacitive height sensing system - Laser eye system for precision - High-pressure Clean-Cut function - Scrap/small parts compartment - Extraction system Blsdsxv Skwjpfx Aa Ion - Chiller unit - Operating manual

Condition: used, mileage: 140,278 km, power: 96 kW (130.52 HP), first registration: 05/2019, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 7,030 mm, total width: 2,115 mm, total height: 3,065 mm, loading space length: 4,377 mm, loading space width: 2,044 mm, loading space height: 2,146 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Errors and prior sale excepted! Internal number: 1082. 2K50928 ----EQUIPMENT * SCHUTZ vehicle body with box body * SÖRENSEN tail lift * Reverse camera * Seat belts: 3-point height-adjustable seat belts with pyrotechnic belt tensioners * ABS * Storage: - Storage compartment under driver’s seat (not with seat base cover) - Storage compartments in front doors Bsdpfx Aajyht H Eo Ieln - Recess above glove compartment - Storage compartments above ventilation outlets in the center dashboard - Removable container under passenger seat - Right lockable glove compartment (5.3 dm³) - Lockable center storage compartment (11.38 dm³) * Driver’s airbag * Interface box for body manufacturer * Exterior mirrors, incl. integrated side indicators and wide-angle inserts * Mechanical brake assist * Rev counter * Electronic Stability Program (ESP) incl. ASR with indicator - Hydraulic brake assist - Hill holder (automatic hold for hill starts) - Load Adaptive Control (adjusts ABS, ASR, and ESP functions to vehicle load) * Power windows front, with comfort function for driver’s side * Transmission: 6-speed manual * Headrests (3) * Paint: solid color * Steering wheel with reach adjustment * Manual headlight leveling * Multifunction display with clock, warnings for headlights on and preset speed limit exceeded, and onboard computer * Particulate filter: diesel soot filter * Upholstery: fabric * Radio pre-wiring (cables and antenna) * Black side protection strips * Power steering * Seats: passenger double bench seat with folding table in center backrest * Seats: driver’s seat with longitudinal, height and backrest adjustment, armrest, and lumbar support * 12V socket in center console * Service interval display * Immobilizer with transponder * Central locking with high-frequency remote control ... and much more. ----The vehicle is in unprepared condition! Nationwide delivery available for an additional charge. Errors and prior sale excepted. We are happy to accept your vehicle as trade-in. Financing / Leasing possible even without down payment! Do you have any questions? We are happy to advise you!

Condition: used, mileage: 38,451 km, power: 100 kW (135.96 HP), first registration: 07/2024, fuel type: diesel, overall weight: 3,225 kg, color: black, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,450 mm, total width: 2,032 mm, total height: 1,978 mm, loading space length: 3,002 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Errors and prior sale excepted! Internal number: 1077. RR28994 ----EQUIPMENT---- - Airbag (passenger side) - Towbar preparation kit - Exterior mirrors electrically adjustable, heated, and foldable - 70 l fuel tank - LED headlights - Metallic paint - Load compartment floor: hardwood - Package: Load compartment protection package "Expr. Line" - Package: Technology package 5 - Radio: Ford audio system with 13 multifunction switches - Socket: 12-volt outlet in loading area - 2-stage unlocking for passenger compartment - 6-speed gearbox Blsdpfx Aeymiaxsa Ijn - ABS with electronic EBD - Driver's airbag - Exterior mirrors electrically adjustable and - Mirror housing made of black plastic - Battery: H7 AGM single battery - On-board computer - Low roof - Roof console - Double rear wing doors / 180° opening (without window) - Rev counter - Third brake light - Electronic safety and stability control - Front electric windows - Electronic parking brake - FordPass Connect - Heated windscreen - Floor mats: Rubber mats in front - Grab handle, driver and passenger sides - Lockable glove box - Front interior lighting - Front automatic climate control - Head restraints (3) - 55 l fuel tank - LED load compartment lighting - Steering wheel: Plastic steering wheel - Small center console - Emergency call assistant - Package: Technology package 2 (Trend) - Diesel particulate filter - Radio accessories: 4 speakers - Tire pressure monitoring system - Windscreen wipers with rain sensor - Headlights with LED dipped beam - Sliding door: right side sliding door - Rear mud flaps - Front mud flaps - Power steering - Seat belts - Seats: Seat package 6A - Start-stop system - Ford Power start function - Front and rear bumpers partially in body color - Partition (metal) without window - Door handles made of black-grey plastic - Door hinges, 90 degrees - Recirculation heating - 8 lashing eyes - Immobilizer - Heat-insulating tinted glass - Central locking with remote control ... and many more features ---- The vehicle is unrestored! Nationwide delivery available at extra cost. Errors and prior sale excepted. We are happy to accept your vehicle in part exchange. Financing/leasing possible with or without down payment! Do you have any questions? We are happy to advise you!

Condition: used, mileage: 39,000 km, power: 88 kW (119.65 HP), first registration: 10/2021, fuel type: diesel, overall weight: 3,050 kg, color: yellow, gearing type: mechanical, emission class: euro6, number of seats: 3, Year of construction: 2020, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net selling price: €9,490 Renault Trafic MAXI / LONG, first owner, with 2 sliding doors Registration date: 10/2021 Mileage: 39,000 km MOT/Inspection: can be done upon request 88 kW / 120 hp Emissions standard: EURO 6 3 seats registered, retrofitting of the passenger seat bench possible VAT can be shown: Special features: - 2 sliding doors - Long wheelbase - LED headlights - Rear view camera - Fog lights - LED interior lighting - 3 seats registered / retrofitting possible Further equipment/special equipment see below: ---- Please no emails / no emails as we cannot process them due to time constraints, thank you for your understanding! ---- Opening hours and further information: Inspection and purchase possible without prior registration: MON - THU: 9:00 a.m. to 4:00 p.m. FRI: 9:00 a.m. to 1:00 p.m. SAT: 9:00 a.m. to 12:00 p.m. Address: Tabakried 11 84076 Pfeffenhausen For questions: Christian Hirsch For questions: Christian Hirsch Please try again, as we are often in a customer consultation. Further offers can be found at: ---- Special equipment: Airbag passenger side, Parking assist system rear with rear view camera, Rear door with window, Visibility package, Load compartment partition with window, Wheel covers, Sliding door load/passenger compartment left, Side airbags front Further equipment: Airbags, Anti-slip regulation (ASR), Exterior mirror elect. adjustable and heated, Battery 85 Ah, On-board computer, Rev counter, Automatic activation for driving lights, Keyless-GO, Glove compartment with cooling function, Interior filter: pollen filter, Body/structure: box van long, Fuel tank: 80 liters, Steering column (steering wheel) adjustable, Model update, Engine 2.0 L - 88 kW dCi Diesel Energy EURO 6, Rear fog light, Radio preparation, Bjdpfxeyiignj Aa Ijln Wheelbase 3498 mm, Tire repair kit, Low emission according to emission standard Euro 6d-TEMP, Headlights Full-LED with LED signature C, Sliding door load/passenger compartment right, Seat cover/upholstery: fabric, Seats in the driver's cab: double passenger seat, Seats in the driver's cab: driver's seat comfort, 3-way adjustable, Start/stop system engine, Daytime running light LED, Lashing eyes in the load compartment laterally, Preparation for electrical installation, Heat protection glazing ---- Please no emails / no emails as we cannot process them due to time constraints, thank you for your understanding! ---- Opening hours and further information: Inspection and purchase possible without prior registration: MON - THU: 9:00 a.m. to 4:00 p.m. FRI: 9:00 a.m. to 1:00 p.m. SAT: 9:00 a.m. to 12:00 p.m. Address: Tabakried 11 84076 Pfeffenhausen For questions: Christian Hirsch For questions: Christian Hirsch Please try again, as we are often in a customer consultation. Further offers can be found at: Further offers can be found at: Equipment was determined with the help of a VIN query, errors may occur for technical reasons. Information on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors / changes / input errors. Errors / prior sale reserved.

Condition: used, mileage: 81,168 km, power: 110 kW (149.56 HP), first registration: 05/2019, fuel type: diesel, overall weight: 7,000 kg, wheelbase: 4,100 mm, color: white, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, central locking, differential lock, immobilizer system, onboard computer, power assisted steering, trailer coupling, Special features - New windscreen - 3-seater - Electric windows - Cruise control - Radio - ABS / ASR - Height-adjustable and reach-adjustable steering wheel - Electrically adjustable and heated mirrors (L/R) - Differential lock - Manual air conditioning - Power steering - Electronic immobiliser - Central locking with remote control - On-board computer - Tow bar - Twin tyres - Reversing camera Superstructure France Elevateur 172 TPFcc - Working height: 17.00 m - Basket floor height: 15.00 m - Maximum outreach: 9.00 m - Slew angle: 400° - Setup inclination: 5% / 15% - Steel boom system with 2 extensions - Internal energy supply routing - Electro-hydraulic controls - Plastic work basket (1000 V insulation) - Indicator light for transport position in the driver’s cab - Ground controls (5 m cable) - Operating hours counter - Emergency pump Bledpfx Aasywg Ive Isn - Cab-activated hydraulic pump - Basket arm slew angle 140° - Audible tilt warning system - Rear platform with integrated underrun protection - 2 hydraulic outriggers - Engine start/stop from work basket - LED strobe lights - 230V socket in basket - 2 x 60° basket rotation - Ladder holder - 2500VA power inverter - Basket dimensions (L/W/H): 1300 x 780 x 1150 mm The Iveco Daily with the France Elevateur 172 TPFcc is an indispensable tool for telecommunications, electrical work, lighting maintenance, municipal services, and painting tasks. Thanks to the compact design of the vehicle and the precise control of the platform, this system is ideal for use in urban areas, construction sites with limited space, and jobs where high flexibility is required. Iveco Daily with access platform 172 TPFcc – your reliable partner for working at height! All platform functions are fully operational and have been checked by our workshop. The vehicle is ready for registration. German paperwork, TÜV, and UVV are included free of charge. Additional features such as tow bar, lighting, shelving, and more are available on request. ACR-Juretzki Nutzfahrzeughandels GmbH – your reliable partner for used commercial vehicles. All vehicles offered by us are the property of ACR-Juretzki Nutzfahrzeughandels GmbH. Our listings use only original photos taken directly at our premises, ensuring full transparency on the vehicle’s actual condition. Before sale, our vehicles undergo a comprehensive reconditioning process in our in-house workshop, covering mechanics, bodywork, and paintwork. They are optimally prepared for their next technical inspection. In addition, we guarantee the authenticity of all stated mileage. Trust is good, control is better: Upon request, the vehicle can be inspected by independent testing organizations such as TÜV, DEKRA, or KÜS – remote inspections are also possible. Our range of services for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, incl. export number plates - Custom financing and leasing options - Trade-in of your current vehicle - Installation of optional extras upon request For technical details, further photos, or a personal consultation, please feel free to contact us at any time.

Condition: used, Year of construction: 2018, machine/vehicle number: 1800603, total length: 2,485 mm, total height: 1,715 mm, total width: 1,245 mm, product height (max.): 240 mm, product length (max.): 600 mm, product width (max.): 400 mm, input voltage: 230 V, input current: 13 A, working height: 870 mm, width of welding knife: 600 mm, length of welding knife: 400 mm, passage height: 240 mm, overall weight: 763 kg, passage width: 400 mm, power: 3 kW (4.08 HP), film width: 700 mm, input frequency: 50 Hz, nominal power: 3 kW (4.08 HP), year of last overhaul: 2025, Equipment: documentation/manual, IMPORTANT NOTE – KNOWN WEAR AND TEAR: A conveyor belt (infeed/outfeed belt, part no. 400201) is worn. A quotation from the authorized service partner for material and labor amounts to €879.59 net. As an alternative, replacement can be carried out independently. We will provide interested parties with the repair quotation upon request. Minipack-Torre Pratika 56 MPE X1 – fully automatic L-bar sealer, year of manufacture 2018, serial no. 1800603. Sold directly by the end user. Fully automatic machine for shrink and film packaging. Schneider-Electric Magelis touchscreen with 256 storable recipes for format, temperature, and speed. SPECIFICATIONS - Output up to 3,600 units per hour - Sealing bar 600 × 400 mm - Product height up to 240 mm Blsdpfxey Stuxe Aa Ion - Film: Polyolefin/PVC/OPP, 7–80 µ - Film roll up to Ø 300 × 700 mm - 230 V single-phase, 3 kW; no three-phase power or compressed air required - L × W × H: 2,485 × 1,245 × 1,715 mm - Weight: 763 kg - Schneider brushless servo drive, PLC logic, emergency stop, and safety features CONDITION AND MAINTENANCE Optically in very good condition. Lifetime counter: 36,415 packages, indicating moderate use. In May 2025, the welding wire, upper and lower rubber strips, and Teflon tape were replaced. Maintenance and repair documentation is available. Due to the aforementioned conveyor belt, the machine will be handed over in its current, transparently described condition; inspection and functional testing are explicitly desired. SCOPE OF DELIVERY - Machine with glass cover, Magelis touchscreen, safety features, and connection cable - At least one suitable film roll with a width of 600 mm - Possibly another remaining roll; the exact inventory will be checked before handover - Machine on four swivel casters - Original documents, including data sheet, order confirmation, and available maintenance and service correspondence LOCATION, TRANSPORT, AND HANDOVER Location: 18239 Satow, Mecklenburg-Vorpommern. Inspection and functional testing are possible by appointment. The buyer organizes and pays for collection or transport. If desired, we will assist in organizing a suitable freight or courier transport. Due to the weight of 763 kg, a suitable special pallet and packaging are required; the transport costs will be added to the purchase price. PRICE AND SALE - Fixed price: €6,900 net (€8,211 gross, including 19% VAT) - Commercial sale by Marko Strehk Einzelunternehmen - Known wear and tear are fully listed above - The machine can be inspected and tested before handover - In the case of an intra-community supply, the tax requirements and proof will be checked in advance If interested, we will gladly send you the repair quotation and the available documents.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 620 mm, travel distance Z-axis: 2,000 mm, bar diameter (max.): 110 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, Horizontal turning machine manufactured in 2007. This BOEHRINGER VDF 400 CM features a 500 mm chuck and a live tool for enhanced versatility. It offers an impressive X-axis travel of 620 mm and Y-axis travel of 2000 mm. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER VDF 400 CM machine we have for sale. Contact us for further details. • Chuck diameter: 500 mm Technical Specification Driven Tools Yes Bljdpfxezzp Aus Aa Isn Counter Spindle No

Condition: used, mileage: 10,364 km, power: 120 kW (163.15 HP), first registration: 08/2025, fuel type: diesel, overall weight: 3,100 kg, color: white, gearing type: mechanical, number of seats: 3, total length: 5,370 mm, total width: 1,928 mm, total height: 1,910 mm, loading space length: 3,100 mm, loading space width: 1,650 mm, loading space height: 1,380 mm, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, No. 74 - You can find this and many other inspected Mercedes-Benz vans on our website: ----Mercedes-Benz Vito 116 cdi Pro Extralong from 08/2025, with low mileage of only 10,364 km. The Vito is equipped with many extras and is in very good condition, first owner. TÜV (technical inspection) NEW - valid until 07/2028. The Mercedes-Benz factory warranty is valid until 08/2027. Sturdy vehicle with a permissible total weight of 3100 kg from the factory, as well as a removable 2.0t trailer hitch from the factory.----The numerous extras include, among others, a 2.0t trailer hitch from the factory, 3100 kg permissible total weight, MBUX, various assistance systems such as blind spot assist, active lane keeping assist, active brake assist, traffic sign assist, head-shoulder airbag (thorax bag) driver/passenger side, reversing camera, air conditioning, navigation system, cruise control, cargo space light LED, multifunction steering wheel adjustable in height and inclination, enlarged fuel tank (70l), DAB, Bluetooth, rain and light sensor, exterior mirrors electrically adjustable and heated, driver's seat comfort with lumbar support, two-way speakers, wheel arch trim, tire pressure control system, (...) . ----All-weather tires Permissible total weight: 3100 kg Unladen weight: 1934 kg Payload: approx. 1166 kg Trailer load: 2000 kg Emission standard: EURO 6e Wheelbase: 3340 mm Cargo space LxWxH (approx. in cm) 310 x 165 x 138 VIN: W1VVLCEZXT4553749 Warranty COC document available 2 keys----* Mercedes-Benz Vito 116 cdi Extralong, 1st owner, TÜV new * MB factory warranty until 08/2027 * 2.0t trailer hitch, removable * 3100 kg permissible total weight * Blind spot assist * Traffic sign assist * Active lane keeping assist * Active brake assist * Head-shoulder airbag (thorax bag) driver/passenger side * Rear door without glazing (opening angle 180 degrees) * Enlarged fuel tank to 70l * Reversing camera * Wooden floor in the cargo area * Air conditioning * DAB, Bluetooth * Navigation system * Cruise control * Rain and light sensor * Wheel arch trim * Tire pressure control system * Multifunction steering wheel, adjustable * Exterior mirrors electrically adjustable and heated * Driver's seat comfort with lumbar support * Two-way speakers * Cargo space light LED * On-board computer * Hands-free system * Armrest for driver's seat Bljdozp A Uyopfx Aa Isn * Electric windows * Central locking ----Errors, changes and prior sale reserved Special features: Driving assistance system: Traffic Information System Live Traffic, Rear door without glazing (opening angle 180 degrees), Wooden floor in the cargo area, Cargo space light LED, Navigation system for multimedia system MBUX, Shoulder-pelvis airbag (thorax-pelvis sidebag) passenger side, Shoulder-pelvis airbag (thorax-pelvis sidebag) driver side, Seats in the driver's cab: Passenger seat as a double seat, Interior panelling in the cargo/passenger compartment: Standard, Lashing rails in the cargo area - side wall on safety belt, Permissible total weight 3.10 t Further equipment: 3rd brake light, Adaptive brake lights, Airbag passenger side, Airbag driver side, Exterior mirrors electrically adjustable and heated, both, Outside temperature indicator, BlueEfficiency package, DAB tuner (digital radio reception), Rev counter, Automatic activation of driving lights, Driving assistance system: Breakdown management, Generator 250 A, Speed limiter 210 km/h, Cup holder front, Glove compartment lockable, Body/structure: Box Standard, Instrument clu

Condition: used, mileage: 67,879 km, power: 96 kW (130.52 HP), first registration: 01/2023, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 02/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,704 mm, total width: 2,059 mm, total height: 2,765 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 1154. NB35453 ----EQUIPMENT * Hardwood cargo area floor (Delignit) with anti-slip coating - with 3 recessed airline rails running transversely * High-mounted LED exterior light, downlight, rear * LED lights in the cargo area * Load securing package - airline rails on the side walls, right and left, at a height of 550/1575 mm (rear-wheel drive) and 650/1675 mm (front-wheel drive) - allsafe JUNGFALK set for load securing including 2 ratchet straps - 2 hooks (KERL Butler) for use in combination with the airline rails - hardwood cargo area floor (Delignit) * Technology Package 10 - windshield, heated, windshield wipers with rain sensor - Park Pilot system front and rear, active emergency brake assist (camera-based) - lane keeping assist with driver drowsiness warning and automatic high beam assist, additionally with lane departure warning - headlight assist with day/night sensor - cruise control - reversing camera, with image display of the rear driving path in the multi-function display - LED downlight - fog lights - Ford audio system with 4" multi-function display * Radio: Ford audio system with 4" multi-function display DAB/DAB+ - Connected Radio (FM/AM) - digital radio reception DAB/DAB+ (Digital Audio Broadcasting) - FordPass Connect - 4" TFT multi-function display (10.16 cm screen diagonal) - 4 speakers, antenna - integrated control panel and audio remote control on the steering wheel - Bluetooth, USB port and hands-free system - emergency assist * High side wall paneling up to the roof * Central locking with remote control * 6-speed transmission * ABS, EBD and DRIVER ASSISTANCE * Airbag, driver side * Exterior mirrors, electrically adjustable and heated * Battery: Extended battery life * On-board computer * Roof, high * Double-wing rear door 256°, without window * Rev counter * Third brake light * Power windows, front * Ford Easy Fuel * Generator, high-performance version * Halogen headlights with daytime running lights * Glove compartment with lockable lid * Interior lighting with delay function * Air conditioning, front * Fuel tank 70 l Bodpezh Snajfx Aa Ieln * Paint: Solid color paint * Cargo area lighting * Steering wheel: Faux leather steering wheel * Steering column, adjustable * MyKey key system * Fog lights * Emergency assist * Package: Technology Package 9 * Particle filter: Diesel particulate filter * Sliding door step light, automatic * Sliding door: Sliding door, right * Mud flaps, rear * Side protection strips * Power steering * Seat belts * Seats: Seat Package 13 * Start-stop system * Partition (plastic) at the height of the B-pillar * Rear step * Recirculation mode * Lashing eyes * Immobilizer * Heat-insulating glass, slightly tinted * Central locking with remote control * Overhead storage compartment, front ... and more ----The vehicle has not been refurbished! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We would be happy to accept your vehicle as a trade-in. Financing / Leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: used, functionality: fully functional, mileage: 58,109 km, first registration: 06/1971, fuel type: gasoline, axle configuration: 4x2, suspension: parabolic leaf (spring), Year of construction: 1971, Unique food truck Volkswagen T2 pickup with a custom-made round container (in the shape of a cup/can) The container is made of aluminum and is insulated/double-walled and custom-built. Standing height of over 2 meters. 2 side hatches for selling your products. 2 counters/platforms. Passage from the cabin to the sales area. Ready to drive – just start and go. Bodpfjzzbbiex Aa Ieln 4 new tires. No mandatory vehicle inspection required. Some rust here and there, but there is no other one for sale. VAT-eligible vehicle. Transportation possible if desired. For more information or to arrange a viewing, please let us know.

Condition: used, maximum load weight: 1,500 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 10/2023, total width: 2,090 mm, total height: 1,980 mm, Errors and prior sale excepted! Internal number: 1411. AAA0483 ----EQUIPMENT * Sales vehicle * Stainless steel cladding * Sales hatch on the left * Sales counter in stainless steel * Accessory shelf Blsdpfx Ajzfdm Nsa Ijn * Hygiene package with double sink * Hot water boiler with cold water pump * Deep fryer with 2 baskets * Bain-marie BMH160 * Storage refrigerator * Refrigerated table with 6 drawers * Refrigerated counter top * 2x extractor hood * LED counter and ceiling lights * Overrun brake system * Supports at the front and rear * Support wheel * Compartment for 2 gas cylinders ... and more ----The vehicle is in original condition! Nationwide delivery possible for an additional charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: used, mileage: 81,168 km, power: 110 kW (149.56 HP), first registration: 05/2019, fuel type: diesel, overall weight: 7,000 kg, wheelbase: 4,100 mm, color: white, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, central locking, differential lock, immobilizer system, onboard computer, power assisted steering, trailer coupling, Special features - New windscreen - 3-seater - Electric windows - Cruise control - Radio - ABS / ASR - Height-adjustable and reach-adjustable steering wheel - Electrically adjustable and heated mirrors (L/R) - Differential lock - Manual air conditioning - Power steering - Electronic immobiliser Bsdpov Nhp Hjfx Aa Ieln - Central locking with remote control - On-board computer - Tow bar - Twin tyres - Reversing camera Superstructure France Elevateur 172 TPFcc - Working height: 17.00 m - Basket floor height: 15.00 m - Maximum outreach: 9.00 m - Slew angle: 400° - Setup inclination: 5% / 15% - Steel boom system with 2 extensions - Internal energy supply routing - Electro-hydraulic controls - Plastic work basket (1000 V insulation) - Indicator light for transport position in the driver’s cab - Ground controls (5 m cable) - Operating hours counter - Emergency pump - Cab-activated hydraulic pump - Basket arm slew angle 140° - Audible tilt warning system - Rear platform with integrated underrun protection - 2 hydraulic outriggers - Engine start/stop from work basket - LED strobe lights - 230V socket in basket - 2 x 60° basket rotation - Ladder holder - 2500VA power inverter - Basket dimensions (L/W/H): 1300 x 780 x 1150 mm The Iveco Daily with the France Elevateur 172 TPFcc is an indispensable tool for telecommunications, electrical work, lighting maintenance, municipal services, and painting tasks. Thanks to the compact design of the vehicle and the precise control of the platform, this system is ideal for use in urban areas, construction sites with limited space, and jobs where high flexibility is required. Iveco Daily with access platform 172 TPFcc – your reliable partner for working at height! All platform functions are fully operational and have been checked by our workshop. The vehicle is ready for registration. German paperwork, TÜV, and UVV are included free of charge. Additional features such as tow bar, lighting, shelving, and more are available on request. ACR-Juretzki Nutzfahrzeughandels GmbH – your reliable partner for used commercial vehicles. All vehicles offered by us are the property of ACR-Juretzki Nutzfahrzeughandels GmbH. Our listings use only original photos taken directly at our premises, ensuring full transparency on the vehicle’s actual condition. Before sale, our vehicles undergo a comprehensive reconditioning process in our in-house workshop, covering mechanics, bodywork, and paintwork. They are optimally prepared for their next technical inspection. In addition, we guarantee the authenticity of all stated mileage. Trust is good, control is better: Upon request, the vehicle can be inspected by independent testing organizations such as TÜV, DEKRA, or KÜS – remote inspections are also possible. Our range of services for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, incl. export number plates - Custom financing and leasing options - Trade-in of your current vehicle - Installation of optional extras upon request For technical details, further photos, or a personal consultation, please feel free to contact us at any time.

Condition: new, Year of construction: 2024, Equipment: all wheel drive, Magni EAB22RT.2 22m Articulated Telescopic Boom Lift, Fully Electric, All-Terrain, 6 units available. * Modular design with parts compatibility across the entire product range * Proportional controls * Steering knob on the joystick * Rotating beacon * Horn * Operating hour counter * Kit for extreme environments * 12 V DC emergency power supply * Front oscillating axle for better stability on any surface * 2 steering wheels * 4 drive wheels * All-wheel drive axle with positive traction * 360° rotation (continuous) * Special integral drive axle for construction machinery * Self-leveling work platform * Work platform rotatable by +/- 90° * Power outlet on the platform * Drive activation system * Load monitoring system on the platform * On-board diagnostics system * Tilt indicator with alarm * Pinch protection * Emergency lowering system * Lead-acid battery * Battery capacity: 48V/375Ah * Charger: 48VDC/60A Blsdpfxsxl Nwto Aa Isn * Single-phase 220V * Charging time from 0 to 100% (hours): 5 Errors and prior sale excepted. Internal vehicle number: R111 WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: new, Year of construction: 2024, Dingli JCPT1212AC 12m electric scissor lift, not suitable for off-road use, 14 units available * Automatic tilt protection system in the undercarriage * Pinch protection * High ground clearance * Self-locking platform door * Speed limitation at maximum height * Electric steering system * Operable at maximum height * Platform overload protection * Automatic braking system * Non-marking tires * Tilt indicator with alarm * Acoustic lowering signal and double LED flashing light * Safety railing for maintenance work * Horn * Cylinder locking valve * Emergency stop button * Emergency lowering system * Drive motor protection * Anchoring eyes * On-board diagnostics system * Operating hour counter * Proportional control * Folding railing * Power supply on the platform * Maintenance-free battery * Motion alarm * Integrated openings for forklift transport * Charging protection system * Charging indicator * Lifting and anchoring points * One-sided platform extension * 2 drive wheels * 2 steering wheels * Manual emergency brake release Capacity: 408 kg Maximum number of occupants: 2 Working height: 12 m Platform floor height: 10 m Overall length: 2.48 m Overall width: 1.15 m Overall height (railing up): 2.49 m Transport height (railing down): 1.96 m Bsdpsxl Nw Hofx Aa Isln Platform length: 2.27 m Platform width: 1.12 m Platform extension: 0.90 m Ground clearance (retracted): 10 cm Ground clearance (extended): 1.9 cm Wheelbase: 1.87 m Turning radius (outside): 2.10 m Drive motors: 2x15VAC/0.87 kW Speed (closed): 6 km/h Travel speed (open): 0.80 km/h Integrated charger: 24V/30A Climbing ability: 25% Maximum working inclination: 1.5°/3° Non-marking tires: 381×127mm Errors and prior sale excepted. Internal vehicle number: R83 WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: new, Year of construction: 2024, Magni ES1012AC, 10m working height, not suitable for off-road use, 10 units available. * Maintenance-free battery * Automatic anti-tipping system in the undercarriage * High ground clearance * Self-locking platform door * Speed limitation at maximum height * Electric steering system * Drivable at maximum height * Platform overload control * Automatic braking system * Non-marking tires * Tilt indicator with alarm * Acoustic lowering signal and double LED flashing light * Safety railing for maintenance work * Horn * Cylinder valve * Emergency stop button * Emergency lowering system * Drive motor protection * Anchoring points * On-board diagnostics system Bodpsxl Nx Rofx Aa Ijln * Operating hour counter * Proportional control * Folding railing * Power supply on the platform * Maintenance-free battery * Motion alarm * Charging protection system * Charging indicator * Lifting and attachment points * One-sided platform extension * 2 drive wheels * 2 steering wheels * Manual emergency brake release * System for containing hydraulic oil leaks Capacity: 450 kg Maximum number of people: 2 Working height: 10 m Platform floor height: 8 m Overall length: 2.48 m Overall width: 1.15 m Overall height (railing up): 2.36 m Transport height (railing down): 1.83 m Platform length: 2.27 m Platform width: 1.12 m Platform extension: 0.90 m Ground clearance (retracted): 10 cm Wheelbase: 1.87 m Turning radius (outer): 2.10 m Drive motors: 2x15VAC/0.87 kW Speed (closed): 6 km/h Travel speed (open): 0.80 km/h Integrated charger: 24V/30A Climbing ability: 25% Maximum working inclination: 1.5°/3° Non-marking tires: 381×127mm Errors and prior sale excepted. Internal vehicle number: R72 WhatsApp support available! If you have any questions about the vehicle or would like more information, please feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis HAAS VM-6 HE Mold Maker was manufactured in 2008. It features an impressive X-axis travel of approximately 1,626 mm, Y-axis travel of approximately 813 mm, and Z-axis travel of approximately 762 mm. The machine includes a 24-position tool changer and has high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VM-6 HE vertical machining centre we have for sale. Contact us for further details. • Through-Spindle Coolant (TSC): Yes • High Speed Machining: Yes • Electrical supply: 360–480 V, 3-phase, 50–60 Hz • Full load: 40 A • Largest load: 70 A • Spindle history: Complete spindle replaced with a new unit in May 2021; control counters were reset afterward (do not reflect total lifetime hours) • Current counters since spindle replacement: • Power On Time: 5,204 h • Cycle Start Time: 3,525 h • Feed Cutting Time: 427 h Bljdpfx Aaozy Izye Ijn • M30 Counter: 121,779 • Current machine condition: Not operational due to a defective main spindle motor • Spindle motor: Yaskawa Electric, Type UAKB-31BHA12, AC Spindle Motor Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2004, operating hours: 615 h, spindle motor power: 22,000 W, spindle speed (max.): 5,000 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 1,045 mm, total height: 2,597 mm, total width: 2,060 mm, overall weight: 9,700 kg, controller manufacturer: MAZATROL, controller model: PC FUSION CNC 640MT Pro, product length (max.): 3,820 mm, number of axes: 5, This 5-axis Mazak INTEGREX 200 III S was manufactured in 2004. It features a maximum turning diameter of 660 mm and a maximum workpiece weight of 150 kg. The machine is equipped with a tool magazine capacity of 80 slots and a rapid traverse speed of 38 m/min on the X and Z axes. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX 200 III S turn-mill centre we have for sale. Contact us for further details. Blsdpfx Aajzr U Aue Ijn - Max. Swing Diameter: 660 mm- Max. Turning Diameter: 660 mm- Max. Turning Diameter over Slide: 500 - 660 mm- Max. Bar Working Diameter: 51 mm- Max. Workpiece Weight (incl. Chuck) - Chuck Workpiece: 100 kg- Max. Workpiece Weight (incl. Chuck) - Shaft Workpiece: 150 kg- Main Spindle Speed Range (Stepless): 35 - 5,000 rpm- Main Spindle Drive Power (30 min. rating / 100% continuous operation): 22 kW / 15 kW- Main Spindle Max. Torque: 349 Nm- Main Spindle Nose: A2-6"- Main Spindle Bore: Diameter 76 mm- Main Spindle Chuck Diameter: 210 mm- Main Spindle Indexing (C-Axis): 0.0001°- Second Spindle Drive Power (30 min. rating / 100% continuous operation): 18.5 kW / 15 kW- Second Spindle Speed Range: 35 - 5,000 rpm- Second Spindle Max. Torque: 326 Nm- Second Spindle Indexing (C-Axis): 0.0001°- Second Spindle Chuck Diameter: 210 mm- Tool Turret Design: Single spindle turret for stationary or driven tools- Driven Tools (IPM Motor) Drive Power (20% ED): 15 kW- Driven Tools Max. Torque: 120 Nm- Driven Tools Speed Range: 15 - 12,000 rpm- Tool Taper: MAZAK KM 63 quick-change system (for stationary tools)- Tool Magazine Type: Drum type- Tool Magazine Capacity: 80 slots (equipped for stationary and driven tools)- Tool Weight: max. 10 kg- Tool Diameter: max. 90 mm- Tool Diameter (with free adjacent slots): max. 125 mm- Tool Length: max. 300 mm- Tool Change Time (Tool-to-Tool step 1): approx. 1.3 s- Travel Y-Axis: +/- 80 mm- Travel W-Axis: 1050 mm- B-Axis Swivel Range: -30° to +195°- Rapid Traverse Speed X-Axis: 38 m/min- Rapid Traverse Speed Y-Axis: 26 m/min- Rapid Traverse Speed Z-Axis: 38 m/min- Rapid Traverse Speed W-Axis: 30 m/min- Rapid Traverse Speed C-Axis: 400 rpm- Feed Range X-Axis: 0 - 8,000 mm/min- Feed Range Z-Axis: 0 - 8,000 mm/min- Feed Range Y-Axis: 0 - 8,000 mm/min- Coolant Tank Capacity: 220 L- Pump Delivery Rate: approx. 20 l/min- Pump Pressure: approx. 5 bar- Pump Power: 635 W- Connected Load: 61.4 kVA- Operating Voltage: 400 V / 50 Hz- Pneumatic Pressure: 5 bar, 500 l/min- Total Operating Hours: 3,520 hours (Recorded on 2026/05/04)- Automatic Process Time: 1,581 hours- Automatic Cutting Time: 1,267 hours- Pure Cutting Time: 905 hours- Operating Time: 615 hours- Standard Accessories / Additional Equipment:- B-Axis (0.0001° positioning axis)- C-Axis (0.0001°)- Y-Axis- Spindle orientation on second spindle- Synchronization of main and second spindle- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (Main Spindle)- Hydraulic 3-jaw chuck diameter 210 mm, Type KITAGAWA B-208, including 1 set of soft jaws (2nd Spindle)- Dual foot switch for opening/closing the chucks for main and 2nd spindle- Feedback of chuck status (open/closed) for main and 2nd spindle- Air blow-out device on chuck (Second Spindle)- Tool Setter (Tool Eye)- Front door interlock- Complete coolant system- Coolant and chip guard via fully enclosed work area- Work area lighting- Chip Conveyor System (Mayfran ConSep unit visible) Technical Specification Counter Spindle Yes

Condition: ready for operation (used), Year of construction: 2025, operating hours: 600 h, spindle speed (max.): 3,500 rpm, travel distance X-axis: 225 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 800 mm, spindle motor power: 18,500 W, total height: 2,365 mm, total width: 2,085 mm, overall weight: 8,900 kg, controller manufacturer: FANUC, controller model: 0iTF PLUS, product length (max.): 4,210 mm, number of axes: 5, This 5-axis Leadwell LTC-25iSMY was manufactured in 2025. It features a maximum turning diameter of 590 mm and a turning length of 770 mm. The machine is equipped with a powerful spindle speed of 3500 rpm and a robust tool head with 12 positions. If you are looking to get high-quality turning capabilities, consider the Leadwell LTC-25iSMY horizontal turning machine we have for sale. Contact us for further details regarding this machine. • Capacities • Max. turning diameter above the bed: 590 mm • Max. turning diameter above the transverse support: 590 mm • Max. turning diameter: 430 mm • Max. turning length: 770 mm • Max. rod diameter: 78 mm • Max. workpiece weight: 39 kg • Axes and travels • Z2 (counterspindle) travel: 780 mm • Min. C1 axis positioning increment (main spindle): 0.001 • Min. C2 axis positioning increment (counterspindle): 0.001 • Main spindle Blsdpfjzw D Drsx Aa Ien • Chuck size: 254 mm • Spindle taper: A2-8 • Spindle bore: 89 mm • Spindle drive type: Fanuc A P30/6000i • Counterspindle • Max. speed: 4000 rpm • Chuck size: 210 mm • Taper: A2-6 • Max. rod diameter: 66 mm • Power: 15 kW • Spindle drive type: Fanuc A 12/7000i • Turret / tooling (EWS tool head) • Clamping system diameter: BMT65 • Number of positions: 12 • Max. external tool size: 25 x 25 mm • Max. internal tool clamping diameter (threading): 40 mm • Neighbor tool change time: 0.8 s • Max. tool change time: 1.3 s • Max. speed of driven tools (axial): 4000 rpm • Max. speed of driven tools (radial): 4000 rpm • Rotary tool drive power: 4.5 kW • Rapid feeds • X: 15,000 mm/min • Z: 20,000 mm/min • Y: 7,500 mm/min • Z2 (counterspindle): 20,000 mm/min • Control • Fanuc 0iTF PLUS with 15" LCD, Manual Guide i, Ethernet • Machine input: 65 kVA Additional equipment • Collet clamping • Hydraulic chuck 254/3 (10"), bar max Ø77 mm, 3500 rpm • Renishaw HPMA tool probe (motorized arm) • High-pressure coolant 20 bar through tool head • Workpiece blow-off nozzle above main spindle • Workpiece blow-off nozzle above counterspindle • Cassette chip conveyor with chip container • Counterspindle with chuck 203/3 • Workpiece removal shovel with container • Preparation/interface for bar feeder • Beacon alarm (machine status light) • Oil separator for coolant emulsion (from lost lubrication) • 3 pcs axial rotary unit BMT65 • 3 pcs radial rotary unit BMT65 • 4 pcs double-sided holder for external turning BMT65 • 4 pcs double-sided holder for internal turning BMT65 • 1 pc single-sided holder for internal turning • Filtermist extraction FX5002 Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 21,713 h, machine/vehicle number: 007, laser power: 4,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, No minimum price – guaranteed sale to the highest bidder! The machine has been serviced annually (most recently in December 2025); service records are available. Bedpszrnhwjfx Aa Ijln The Laser Turbo-Blower was replaced in 2021. The X-axis and Y-axis were renewed in 2023 after 27,066 operating hours. TECHNICAL DETAILS Travel range X-axis: 2,520 mm Travel range Y-axis: 1,550 mm Travel range Z-axis: 300 mm Travel range B-axis: 17 mm Cutting capacity, normal steel: max. 12 mm Cutting capacity, stainless steel: max. 10 mm Cutting capacity, aluminum: max. 8 mm Laser power: 4 kW Wavelength: 10.6 µm Laser beam diameter at the outlet of the laser resonator: 27 mm Cutting speed X-axis: 0 to 20 m/min Cutting speed Y-axis: 0 to 20 m/min Travel speed X-axis: max. 80 m/min Travel speed Y-axis: max. 80 m/min Travel speed Z-axis: max. 60 m/min Workpiece weight: max. 330 kg Material size: max. 1,500 × 5,000 mm Table height: 820 mm MACHINE DETAILS Control system: AMNC-F (FS-160I LPB) Minimum measuring unit: 0.001 mm Memory capacity: 10 MB Dimensions & Weight Machine dimensions (L × W × H): 5,745 × 2,630 × 2,151 mm Net weight: 7,700 kg Operating hours (according to counter) Operating hours: 34,401 h Runtime: 21,713 h Cutting time: 11,111 h EQUIPMENT Loading and unloading system Filtration system Manuals The seller can offer dismantling and loading of the machine for an additional fee. Within Germany, the seller can also offer an installation service at the new location.

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 800 rpm, travel distance X-axis: 550 mm, travel distance Z-axis: 4,000 mm, spindle motor power: 15,000 W, total height: 1,700 mm, total width: 1,950 mm, overall weight: 9,600 kg, product length (max.): 6,900 mm, workpiece diameter (max.): 1,010 mm, number of slots in tool magazine: 4, number of axes: 2, Horizontal turning machine manufactured in 2017. This KEY EAST BV-40160 features a swing over bed of 1,010 mm and a distance between centers of 4,000 mm. It includes a front and rear chuck diameter of 500 mm, along with a digital readout for enhanced precision. If you are looking to get high-quality turning capabilities, consider the KEY EAST BV-40160 machine we have for sale. Contact us for further details. Bjdpfezuxl Sjx Aa Isln • Conventional flat bed lathe with 2 axes (X and Z) • Equipped with a compound slide featuring a glass scale, whose movement is calculated together with the Z-axis on the digital readout for improved positioning accuracy • Power Supply: 380 V • Frequency: 50 Hz • Phase: 3 Ph • Center Height: 505 mm • Distance Between Centers: 4,000 mm • Front Chuck Diameter: 500 mm • Rear Chuck Diameter: 500 mm • Steady Rest: Included • Tailstock: Included • 4-Way Manual Tool Post: Included • Coolant System: Included • Lubrication System: Included • Machine Condition: Used Technical Specification Counter Spindle No Driven Tools No