Used Rotary Vibrator for sale (5,654)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2500x2100x1800 mm Weight 1700 kg Total power requirement 7,5 kw Rcedpev A E Sfjfx Aa Ejk

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100 % air recirculation Residual dust content < 0.1 mg/m³ Low noise emission Longer filter life Easy emptying Supplied ready to plug in With rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Intake port: 300 mm Nominal motor power: 7.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow 4,900 m³ / h 6,000 m³ / h Nominal volume flow: 5.089 m³ / h Negative pressure: 2.280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Cellular wheel capacity:15.816 L / h Weight:920 kg Rcjdpfxjhkzu Ao Aa Eok Location: ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: used, Year of construction: 2009, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,300 kg, load capacity: 100 kg, arm reach: 2,800 mm, Equipment: documentation/manual, - Kuka industrial robot with a horizontal rotary table (fully integrated into the KUKA controller as the 7th axis) Rodpfjvvygkox Aa Eeck - has only 2500 operating hours, has only been used for occasional tests over the last 7 years.

Condition: good (used), functionality: fully functional, “4 Pcs. AEG OA 1750 / 900 – AS – GY” for Sale Manufacturer: AEG Type: OA 1750 / 900 – AS – GY Size: 1.750 x 900 (750)mm Magnetic Vibrator: MV G (8 kW) / MV 400 (7 kW) Rsdpfx Aju Tkraoa Esck Thyristor controller: Included Frame: With/Without With Stainless steel wear plate.

Condition: good (used), Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor -Cell wheel lock. 6-blade, without drive Rodewnn Aiepfx Aa Ejck -Type: Ecluse 400x400 -Inlet opening: 400 x 390 mm -Outlet: 400 x 280 mm -Shaft: Ø 30 x 105 mm -Dimensions: 620/500/H650 mm -Weight: 89 kg

Condition: good (used), Year of construction: 2017, NNP Rotary moulder Redpfsuanp Nex Aa Eock Stainless, belt dimensions 2250mm x 650mm, 650mm rotary moulder, previously used for pizza bases, with top mounted oil spray nozzle

Condition: used, Year of construction: 2012, functionality: fully functional, The rotary table from MTF is available for sale; Redpox Ek Dwefx Aa Eock Container query: 600 mm x 400 mm x 400 mm Interface for query 2 levels, each with 4 containers Diameter: 1500 mm, height: 1200 mm

Condition: excellent (used), Pfeiffer DUO 65 two-stage high-performance rotary vane pump Here we offer a Pfeiffer DUO 65 two-stage high-performance rotary vane pump. Pfeiffer DUO 65 two-stage high-performance rotary vane pump Two-stage high-performance rotary vane pump with suction capacity of up to 70 m3/h With 3-phase motor With temperature sensor (3TF) for optimal motor protection Integrated gas ballast and HV safety valve For all applications in the rough and fine vacuum range Duo 65, 3-ph motor, 3TF, 200-230 / 346-400V, 60 Hz Type: PK D46 642 A with ONF 35/65 oil mist separator, corrosive version,  Sits on the pump's exhaust nozzle and prevents air pollution from oil mist. Type: PK Z40 150 Rcedpfx Aovx Tfxsa Ejk Scope of delivery: (See picture) We are happy to answer any further questions you may have over the phone. Written orders can be placed by email or fax

Condition: ready for operation (used), Trowal Vibrator – Walther Trowal – Industrial Vibratory Machine For sale is a robust industrial vibrator from Trowal (Walther Trowal), suitable for reliable use in bulk material and parts conveying applications. The machine stands out with its heavy-duty construction, consistent vibration performance, and durable spring suspension. Ideally suited for conveying, dosing, or singulating tasks in industry, recycling, or metalworking. Equipment & Features: • Original Trowal / Walther Trowal vibrator • Sturdy feed hopper with flap • Vibration trough with spring suspension Rjdpfxjx Htbhs Aa Eock • Integrated control cabinet with controls • Solid industrial design – built for continuous operation • Used, fully functional (age- and usage-related signs of wear) Typical Fields of Application: • Metal and parts conveying • Bulk material processing • Recycling plants • Industrial and production facilities Condition: Used, with visible signs of wear, technically functional as stated. Scope of Delivery: Machine as shown. Crane mounted on the conveyor unit for extracting heavy materials.

Condition: used, Year of construction: 1996, functionality: fully functional, 5 units available Rodexz E Dhjpfx Aa Ejck Model: JV 206-700 Workshop-tested and newly painted 2.80 kW 50 Hz 400 V 960 rpm

Year of construction: 2000, condition: good (used), Metering rotary valve, rotary valve, metering valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveying technology, pipe screw conveyor Rotary valve. Type JK-S without 6 wings, with drive Rjdpfx Aaowq I Tgj Esck -Speed: 20 rpm -Drive motor: KEB 0.37 kW -Inlet/outlet opening: 225 x 215 mm -Dimensions: 650/350/H305 mm -Weight: 45 kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: P01740 F 01278 / 21, type of input current: AC, total height: 310 mm, total width: 430 mm, total length: 570 mm, input voltage: 230 V, overall weight: 48 kg, Equipment: type plate available, The UVR-300 universal vibrator enables fast and fully automatic feeding of various stud diameters up to M8 without the need for retooling and adjustment work. Rcedpot Aktkofx Aa Esk Condition: Slight signs of use, as the universal vibrator was only used once as a demonstration unit. Working range: SOYER threaded bolts and pins with flange M3, M4, M5, M6, Ø 7.1 and M8 from 6 - 40 mm in length Feed rate: approx. 20 - 50 studs/min, depending on dimensions Filling quantity: max. 6 kg Vibrator bowl Ø: 300 mm Compressed air: 5 - 7 bar Mains connection: 115/230 V, 50/60 Hz (115 V possible via ballast) Dimensions: 430 x 310 x 570 mm (W x H x D) Weight: 48 kg Scope of delivery - Universal vibrator UVR 300 - Conversion kit for M3 - M8 We deliver free domicile, duty paid and taxed (DAP, duty paid).

Condition: reconditioned (used), Year of construction: 1989, functionality: fully functional, volume flow: 12.6 m³/h, overall weight: 200 kg, total length: 1,250 mm, total width: 415 mm, total height: 450 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 25 rpm, rotational speed (min.): 20 rpm, torque: 390 Nm, 2 pieces of unused rotary valve dosing sluices. Both sluices have been completely overhauled. New bearings and seals have been installed. ! Price per item ! Manufacturer: Kreisel Industries GmbH Type: ZS315-1 Size inlet / outlet: 300 x 300 mm Housing material: cast iron / Rotor: welded steel sheet Overall height: 450 mm Number of cells: 7 Cell dimensions: length 300 mm / width 100 mm / height 40 mm Weight: 200 kg per piece The geared motors are also unused old stock. Rodpfx Aasx N A N To Eock Manufacturer: Thurm DDR Year of manufacture: 1990 Function tested! Bearings can be relubricated from both sides externally. Sluice 1 Drive power: 0.75 kW Speed: 20 rpm Theoretical delivery rate: 10 m³/hour Sluice 2 Drive power: 1.1 kW Speed: 25 rpm Theoretical delivery rate: 12.6 m³/hour

Condition: excellent (used), Leybold Type: Trivac D 40 B The TRIVAC B are oil-sealed vacuum pumps based on the rotary vane principle. The oil injected into the pump chamber serves for sealing, lubrication and cooling. The pump body is made up of individual parts without sealing elements. These are pinned to ensure easy disassembly and assembly. Final pressure: 2 x 10⁻³ mbar Motor: 3-ph, 230/400 V, 50/60 Hz Suction capacity (50 Hz): 40 m³/h Suction capacity (60 Hz): 48 m³/h Environmentally friendly: Quiet Vibration-free operation Energy-saving Energy-saving: Low power consumption Low heat emission Modern vacuum technology: High suction capacity up to the final pressure Low final pressure, also with gas ballast High water vapor tolerance Continuous operation even at 1000 mbar Built-in oil pump, forced-lubricated plain bearings Minimal air intake High leak tightness (4He capable) Technical data: Product: TRIVAC D 40 B Connection flange suction side: DN 40 ISO-KF Connection flange pressure side: DN 40 ISO-KF Nominal suction capacity at 50 Hz: 46.0 m3/h Nominal suction capacity at 60 Hz: 55.0 m3/h Suction capacity at 50 Hz: 40.0 m3/h Suction capacity at 60 Hz: 48.0 m3/h Final partial pressure without gas ballast: 1.0 x 10-4 mbar Final total pressure without gas ballast: < 2.0 x 10-3 mbar Final total pressure with gas ballast: < 5.0 x 10-3 mbar Water vapor tolerance at 50 Hz: 40.0 mbar Water vapor tolerance at 60 Hz: 40.0 mbar Water vapor capacity at 50 Hz: 1,184 g/h Water vapor capacity at 60 Hz: 1,184 g/h Amount of operating fluid min.: 1.7 l max.: 2.6 l Noise level according to DIN 45 635 without gas ballast: 57 db(A) with gas ballast: 59 db(A) Rcjdsvx Tduspfx Aa Ejk Mains connection: 3-ph, 200 / 200-240 / 380-400 V ±10%, 50 Hz 3-ph, 200-240 / 380-480 V ±10%, 60 Hz Motor power: 2.2 kW Motor speed at 50 Hz: 1,430 min-1 Motor speed at 60 Hz: 1,735 min -1 Motor protection type: IP 55 Permissible ambient temperature: +12 to +40°C Weight: 73.0 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are reserved!) We can answer any further questions We will be happy to answer your questions over the phone.

Condition: used, Year of construction: 2018, Vibratory conveyor from Wolfgang Hörmle For sale in different versions and in good condition. SRC-N 200 left SRC-N 200 right SRC-N 250 left Rcjdjt Ect Iepfx Aa Eek SRC-N 250 right HFS 168 control unit

Condition: like new (used), functionality: fully functional, machine/vehicle number: Drop 31, input voltage: 380 V, year of last overhaul: 2022, inner dimension length: 250 mm, inner dimension width: 250 mm, Good as new lock Rcodpfx Aajuigtrs Ejk inlet square 250x250 sheets 10mm thick completely stainless steel motor 0.55 kw 17 rpm maintained annually 5 pieces available

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 92ML/109/11821, rotary table diameter: 1,220 mm, grinding height: 572 mm, total width: 4,394 mm, total length: 3,353 mm, overall weight: 13,700 kg, grinding wheel diameter: 711 mm, spindle speed (max.): 550 rpm, power: 35 kW (47.59 HP), table diameter: 1,219 mm, Lumsden 92 ML Vertical Spindle Rotary Surface Grinder , 48 Inch dia chuck, autosizing, table jog facility, Filtermist unit fitted with (2) extraction vents to rear of table guards, fitted with segmented wheel, serial number 92ML/109/11821. Machine tools manuals. Coolant filtration tank. Also with unused grinding stones segmented. Rjdpfx Aaoxgq D Do Eeck Table Diameter 48″ / 1219mm, Segmental Wheel Dia. 28” / 711mm, Max. Height Capacity 22.5″ / 572mm, Spindle Speed 550rpm, Table Speed 6 & 18rpm, Auto Feed 0.004-0.04 ins/min – 0.1-1.0 mm/min, Spindle Motor 50HP / 35Kw, Floor Space 14′ x 11′ / 4394 x 3353mm, Approx. Net Weight 12T/12200Kg, Approx. Gross Weight 13.5T /13700Kg1220

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, This 2 shaft rotary shear will completely refurbished. The cutting unit is equipped with 58mm blades, but can be adapted on request. The drive power is 2 x 75 kW. Rcodpsfdvd Iefx Aa Ejk Fast knive change system incl. coupling. The machine includes a hydraulic pressure device, a feed hopper and a electrical cabinet including Siemens S7 control and coloured HMI 9". Painting can be adapted in a RAL colour on request.

Condition: used, functionality: unexamined, total height: 230 mm, overall weight: 1,000 kg, total width: 900 mm, total length: 1,070 mm, type of input current: AC, input voltage: 220 V, - Used optical rotary table, diameter 800 mm - Manufacturer: Carl Zeiss Jena DDR Rcedpfx Ajx Nd Rloa Esk - T-slot width: 18 mm - Optical display in degrees, minutes, and seconds - Sale exclusively to commercial customers, with any warranty excluded

Condition: excellent (used), Here we offer you a Johansson coordinate measuring machine. The coordinate measuring machine for measuring large workpieces. Measuring machine Johansson Cordimatic 7000 with Renishaw Retrofit (control, rotary/swivel probe & probe exchange library) Johansson Cordimatic 7000 measuring machine with Renishaw PH10T rotary/swivel head Rodpfx Aajg Iiqfj Ejck Measuring range - 28" x 17" x 13.5" Granite table size - 42" x 28" x 8" Equipped with: Calculator Metrologic 1 joystick trailer controller Metrologic software manuals Joystick and control from RENISHAW SPA2 servo power amplifier UCC2 Controller Type: Johansson Cordimatic 7000 coordinate measuring machine Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Year of construction: 1995, functionality: fully functional, • Features: - 5 wet offset printing towers - Web width: 520 mm - Print width: 510 mm - Mechanical speed: 350 m/min • Equipment: - Paper unwind station - Web edge control - Web tension control - Turn bar unit - Alcohol dampening system - Sheeter (cross cutter) - Non-stop high pile delivery - Plate and film punching system Rodpfx Aaoxzzz Ae Esck - Plate bending table - Edge extraction system • Accessories: - Technical documentation - Operating manual - Toolbox with tools

Condition: used, Rotary table disc conveyor 1700-1600-Ø1500 with ejector 1330-100 RA2025 Technical data rotary table: Length table: 1700 mm width table: 1600 mm diameter turntable: 1500 mm Overall height: 100 mm Adjusted table height: 790 mm, can be moved down to 590 mm Electrical data SEW motor: 380-415 V, 0,37 kW Electrical data drum motor: 24V Technical data diverter: Length/ belt length: 1330 mm belt width: 100 mm overall height: 840 mm Electrical data: 380-415 V, 0,25 kW Included in delivery: Rodjrc D Nrspfx Aa Ejck Turntable with feet Side guide Ejector with stand Optional: Light barriers 24V power supply for drum motor control cabinet/control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 2020, Absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, rotary indicator, resolver, incremental encoder -Manufacturer: Sick, Incremental rotary encoder, programmable -Type: DFS60B-S4PC10000 Rcodpfx Aaoxv T Rxe Eok -Item No.: 1036721 -Voltage: 4.5-32 V -Shaft: Ø 10 x 19 mm -Quantity: 1 encoder available -Dimensions: 75/60/H60 mm -Weight: 0.2 kg

Condition: good (used), Here we offer a Busch rotary vane vacuum pump. Busch rotary vane vacuum pump p 0.1 hPa (mbar) Rcodpjdihngsfx Aa Eek Oil Bush VM 100 1,00L Weight approx. kg 450 Type: RA 0040 F-503 Condition: pre-owned / used Scope of delivery: (See image) (Errors and omissions in the technical data, information are reserved!) We can answer questions on the phone for you. Written order possible by email or fax

Condition: good (used), Gripping pliers, clamping pliers, robot gripper, rotary gripper -Manufacturer: afag, Grabber Rotary Gripper -Type: DG 20 -Stroke: 12 mm -Quantity: 1x gripper available -Dimensions: 125/70/H50 mm Rcjdpfoxv Slnox Aa Eok -Weight: 0.6 kg