Used Rotary Table Tilting for sale (20,604)

Condition: new, total power requirement 230 Volt table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min bore 20.0 mm weight of the machine ca. 50.0 kg Cjdpfxoxaatno Agkoha dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0.6 - 6.0 U/min spindle bore 60.0 mm swivelling range 0 - 90.0 Grad Codpfx Agjxaafqjksha weight of the machine ca. 62.0 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: used, Year of construction: 1982, Technical details: table length: 2200 mm table width: 2500 mm table load: 16 t total power requirement: 6,5 kW feed speeds: 1,25 - 160 mm/min rapid traverse speed: 2000 mm/min longitudinal adjustment: 1500 mm weight of the machine ca.: 12 t Chodpfsvb A Uuex Agkoa dimensions of the machine ca.: 4,1 x 2,65 x 0,95 m

Condition: used, Year of construction: 1990, table load max. 40 t t with manual operation panel ja weight of the machine ca. 22 t 1918 Year ca. 1990 Dimensions (L/W/H) 3500 x 2300 x 2400 mm +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Chjdpfx Ajhy T Nvjgkea Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Cedpfxsgvkktj Agkeha Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: new, table diameter 900 mm table load 1 t swivelling range 0-135 Grad excentricity 200 mm table turning speeds 0,12 - 1,2 U/min Torque 2000 N/m total power requirement 0,75 kW dimensions of the machine ca. 1,5 x 1,020 x 0,9 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control Chjdpfjgvkikex Agkoa - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m centre of gravity max. 150 mm total power requirement 0,4 kW The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control Chodpfx Agsgvkgtekoa - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table diameter 350 mm table load 0,1 t swivelling range 0-90 Grad table load horiz. 100 kg table load vert. 50 kg Codpjgvkk Nsfx Agkoha boring diameter 30 mm table turning speeds 0,5 - 5 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,2 t dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Welding table with hollow shaft D-DWP Tilt and turn tables with bore for turning, tilting and welding small workpieces from 100 kg. - Rotation and tilt axis - Infinitely variable speed - Compact model - Incl. Foot pedal

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW Chjdpfx Ajh Evt Ujgkja The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking

Condition: new, table load 1000 kg table diameter 900 mm turning speeds 0,12 - 1,2 U/min swivelling range 0 - 135 Grad speed Kipp 0,35 U/min welding current 500 A dimensions of the machine ca. 1475 x 1050 x 900 mm For heavy industry When choosing a turntable, it is essential Turning and tilting torque must be taken into account. To note applies to how far the center of gravity of the workpiece is from the The faceplate is away or how far the center of gravity is is eccentric from the center. By means of a Rotary and tilting tables can be used to optimize workpieces position for welding. - Robust construction. - Infinitely variable. - Hand remote control. - HF protected. Furnishing : Chsdexaac Ajpfx Agkoa - 1 control (integrated) - 1 wired remote control

Condition: as good as new (ex-display), Year of construction: 2024, weight max. in kg max. 1000 kg turning speeds 0,18 - 0,58 U/min height 976 - 1436 mm inclination 0 - 115 ° table diameter 895 mm voltage 380 V total power requirement 2,0 kW weight 685 kg range L-W-H 2414 x 920 x 1436 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW!! Special price on request The AK BEND SRH hydraulic welding positioner is ideal for welding, assembly and maintenance work. Positioning is done via a hydraulic rotation and tilting function. Description: Chjdpfx Asw U U R Esgkea - electro-hydraulic turning and tilting function - Fast handling of workpieces - Maximum productivity thanks to optimal working position - Lifting, tilting and turning workpieces in one clamping - Low idle times thanks to turning components - Maximum work performance thanks to comfortable working - Back-friendly working for the user Equipment: - Continuously variable speed adjustment - Freely movable foot switch - Hand-held remote control with 5 meter cable - Freely movable control panel with digital speed display - Analogue angle display * Manufacturer video (identical rotary table): ?v=Vayw8Ny64nc

Condition: used, Year of construction: 1990, Expert Eda450 Size of table plate 450 mm weight of the machine ca. 380 kg Chjdpfx Aof Nlrqogkea +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Dreh- und kippbar für Schweißpistole oder Csdpfxjidv Ere Agksha für Plasma condition nicht geprüft +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2026, condition: new, Stainless Steel Rotary Table – For Food Packaging Lines Manufacturer: In-house production Machine type: Rotary table / accumulation table Application: Food packaging and processing lines Description This stainless steel rotary table is designed for product accumulation and handling at the end or beginning of food packaging lines. The table allows operators to easily collect, sort, or feed products during the packaging process. The rotary table is built with hygienic stainless steel construction and is suitable for use in food production environments. It can be used as a collection table after packaging machines or as a feeding table before labeling, weighing, or packing systems. Our rotary tables are manufactured in-house and can be supplied in different diameters depending on customer requirements. Technical Specifications - Machine type: Rotary accumulation table - Construction: Stainless steel (food grade) - Drive: Electric motor with gearbox - Speed: One rotation speed - Power supply: 230 / 400 V – 50 Hz (depending on configuration) - Design: Hygienic construction suitable for food environments Key Features - Heavy-duty stainless steel construction - Smooth product accumulation and handling - Suitable for food production and packaging lines Applications - Food packaging lines - Tray sealing lines - Checkweigher and labeling lines - Product collection after packaging machines Condition Chsdpfx Agoyt Hdzjksa New – manufactured in-house.

Year of construction: 1960, condition: good (used), machine/vehicle number: 970015, Load capacity with horizontal swivel plate position: 10 t Load capacity with vertical swivel plate position and center of gravity distance of 300 mm: 10 t Load capacity with vertical swivel plate position and center of gravity distance of 830 mm: 5.5 t Swivel plate dimensions: 1500 x 1500 mm Swivel plate speed, hydraulically continuously adjustable: 0.025 - 0.75 rpm Swivel range: 0 - 135° Swivel time for full swivel range (to): 140 s Chjdecblc Sepfx Agkea Swivel time for full swivel range (from): 120 s Hydraulic drive: 380 V Height of the swivel axis above the floor: 1450 mm Space requirement: 3800 x 1950 x 1800 mm Weight approx.: 3.5 t Weight of the counterweight: 2.3 t

Condition: used, with mounted three-jaw chuck Chsdpfx Ageda I Rvjksa Table diameter: 200 mm Bore diameter: approx. 18 mm Overall height: 100 mm Total height with chuck: 165 mm Width: 270 mm Length: 320 mm

Condition: ready for operation (used), Horizontal rotary table, manually operated Bore diameter: 145 mm Cjdpfjwx H Irox Agkjha Including 3 inwardly stepped jaws Space required: 500 x 500 x 300 mm

Condition: ready for operation (used), Outside Ø: 350 mm Bore: 40 mm Construction height: 115 mm including three-jaw chuck AROWA, 250 mm Ø, bore: 75 mm Chjdpfjg Hzazox Agksa Total weight:

Condition: repair required (used), Year of construction: 2000, functionality: not functional, machine/vehicle number: 49299, rotary table diameter: 600 mm, grinding height: 400 mm, workpiece weight (max.): 300 kg, grinding diameter: 500 mm, workpiece diameter (max.): 500 mm, TECHNICAL DETAILS Workpiece diameter: 500 mm Workpiece weight: 300 kg Workpiece height: 400 mm Grinding diameter: 500 mm Grinding height: 400 mm Table load capacity: 300 kg Magnetic rotary table diameter: 600 mm Rotary table speed: 20–80 rpm Y-axis Max. feed rate: 300 mm/min Incremental position measurement system, rotary encoder, resolution: 0.001 mm Z-axis Max. automatic cross travel: 330 mm Cross feed: 4–1,500 mm/min, adjustable Incremental position measurement system, rotary encoder, resolution: 0.001 mm Grinding spindle taper: 60 mm Grinding wheel: 400 x 100 x 127 mm MACHINE DETAILS Total power requirement: 18 kW Grinding spindle drive: 10 kW Space requirement approx.: 2,500 x 2,700 x 2,800 mm Control cabinet dimensions (L x H x D): 1,600 x 2,200 x 500 mm EQUIPMENT Coolant system with paper band filter NK grinding program Chodpjxr U T Tjfx Agkja Electronic handwheel switchable for B-Y-Z axis Machine enclosure with manually operated sliding door for loading and unloading Note: The frequency converter for the grinding spindle is defective. An offer from ELB is available (costs € 3,712.50 + packaging and shipping).

Condition: used, table diameter 630 mm weight of the machine ca. ca, 0,35 t Chjdpfeymf U Ejx Agkoa table height 220 mm

Condition: used, Year of construction: 1999, plate width 2980 mm plate depth 3000 mm Chjdpfogxqvzex Agkea plate height 1400 mm total power requirement 11 kW

Condition: used, table diameter 500 mm weight of the machine ca. ca. 0,2 t Chodpjylz D Hsfx Agksa table height / mm

Condition: ready for operation (used), Table diameter: 250 mm Table height: 105 mm Cedpfx Ageyv D Ahokoha

Year of construction: 1988, condition: used, table diameter 400 mm table load 0,126 t table height 100 mm weight 126 kg Chedpfjipyx Nex Agkja Dividing rotary table with 400 mm diameter of a Heckert FSS 400.

Condition: new, Year of construction: 2026, functionality: fully functional, The basic components of the grinding machine include: base, slides, column with grinding wheel spindle, rotary table, and control cabinet. The table is driven by a mechanical transmission and a gearbox-frequency converter unit, and performs a rotary motion. The rotary speed of the table is adjusted using a potentiometer on the machine's control panel. In manual operation, the machine will have the ability to perform pulsed rotary movement of the table, controlled from the operator's panel. The transverse feed is performed by the column and spindle moving along the rolling guides of the base. This movement is realized using a ball screw with a belt drive and an asynchronous motor controlled by a frequency inverter. The vertical feed is performed by the spindle moving along the sliding guides of the column. A ball screw is used to drive the vertical feed. The continuous feed of the column is stepless. These values are set from the control panel. Chodpfxszfyvys Agkoa The machine will be equipped with a direct digital readout on the vertical axis with a resolution of 0.001 mm. An electronic handwheel for vertical axis feed during manual operation and an operator panel (programmable display) will be placed on the operator's panel. The grinding machine will have smooth adjustment of the grinding wheel spindle speed and the table speed. The machine will be able to operate in an automatic cycle with the possibility of programming the number of sparking passes and other parameters necessary for grinding in an automatic cycle. Safe operation of the grinding machine is ensured by a semi-enclosed cabin and all electrical and mechanical safeguards in accordance with CE standards. 1 Table working surface Ø800 mm 2 Maximum distance between the table surface and the spindle axis during manual spindle feed 350 mm 3 Minimum distance between the table surface and the spindle axis 125 mm 4 Maximum weight of the workpiece 2500 N 5 Range of steplessly adjustable table speed 2-100 m/min 6 Maximum horizontal column feed 450 mm 7 Range of steplessly adjustable column feed speed 0.2 – 3 m/min 8 Grinding wheel feed per: 1 encoder unit 0.001 mm 9 Minimum automatic grinding wheel feed 0.001 mm 10 Maximum automatic grinding wheel feed 0.040 mm 11 Speed of accelerated grinding wheel feed 1 m/min 12 Grinding wheel spindle speed 1000 – 2500 RPM 13 Diameter of new grinding wheel 400 mm 14 Diameter of worn grinding wheel 250 mm 15 Bore for mounting the grinding wheel 127 mm 16 Width of grinding wheel nominal / maximum 50 mm