Used Rotary Table Surface Grinder for sale (23,111)

Condition: new, table diameter 340 mm table load 290 horizontal kg table load capacity 190 vertikal kg turning speeds 0,6 - 6,0 U/min spindle bore 60,0 mm swivelling range 0 - 90 Grad weight of the machine ca. 62 kg dimensions of the machine ca. 380 x 340 x 425 mm Furnishing: - The table can be tilted and clamped at an angle of 0 to 90 Giedpfx Aexaafqefnen - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time. - The turntable has a 60 mm hollow shaft. - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - Operating instructions in German Functions of the COM 1000 control: - Right / left rotation - stepless speed control - welding torch on / off - Control for turning time

Condition: new, table diameter 340 mm table load 160 horizontal kg. table load 100 vertikal kg. turning speeds 0,6 - 6,0 U/min swivelling range 0 - 90 Grad bore 60,0 mm motor 230 Volt weight of the machine ca. 56 kg. range L-W-H 385 x 340 x 375 mm Furnishing: - The table can be adjusted at an angle of 0 to 90 degrees tilt and jam - Start / stop via a location-independent foot switch. - Direction of rotation can be selected right / left. - Adjustable rotation time - The turntable has a 60 mm hollow shaft - The turntable has a diameter of 340 mm. The surface is chrome-plated for Protection against welding spatter. - The table speed is adjustable from 0.6 - 6 rpm. - The control of the welding machine via the turntable control is possible. - The ground contact transmits 300 A / 100%. - The turntable and the control are separate. - HF protected. - COM 1800 control with lap welding - Operating instructions in German Functions COM 1800 control: - Right/left rotation - Infinitely variable speed control - Welding torch on/off - Overlap welding adjustable - Controller for rotation time (2-stroke / 4-stroke) Giodpfsxabm Nox Afnjn - Speed display

Condition: as good as new (ex-display), Year of construction: 2024, weight max. in kg max. 1000 kg turning speeds 0,18 - 0,58 U/min height 976 - 1436 mm Godpjw U U R Esfx Afnein inclination 0 - 115 ° table diameter 895 mm voltage 380 V total power requirement 2,0 kW weight 685 kg range L-W-H 2414 x 920 x 1436 mm Exhibition machine from 2024 with only approx. 2x operating hours Condition NEW!! Special price on request The AK BEND SRH hydraulic welding positioner is ideal for welding, assembly and maintenance work. Positioning is done via a hydraulic rotation and tilting function. Description: - electro-hydraulic turning and tilting function - Fast handling of workpieces - Maximum productivity thanks to optimal working position - Lifting, tilting and turning workpieces in one clamping - Low idle times thanks to turning components - Maximum work performance thanks to comfortable working - Back-friendly working for the user Equipment: - Continuously variable speed adjustment - Freely movable foot switch - Hand-held remote control with 5 meter cable - Freely movable control panel with digital speed display - Analogue angle display * Manufacturer video (identical rotary table): ?v=Vayw8Ny64nc

Year of construction: 2012, condition: ready for operation (used), Max. load: 2.5t, connected load: 4kW, weight: 1.477t. Godpfjlyrz Ijx Afnoin

Condition: new, Year of construction: 2026, Tabletop version -High performance -Belt grinding attachment height adjustable from 0-90° -Maximum usable surface grinding surface -Belt adjustment with fine adjustment Combined belt grinder/sander -Longitudinal stop for material guidance -Perfectly balanced and low-vibration -Double-sided connection for dust extraction Ø 50 mm -Motor protection switch with undervoltage release Gsdshhiaaopfx Afnjin -Fixed stop -1 standard sanding belt (brown), grit 80 -1 sanding disc 250 x 40 x 51 mm, grit 80 -Spark arrester -Connection cable with CEE plug Additional charge for special equipment/options: - Machine stand, emergency stop push button, brake, and extraction system / €2,260 (Item 330.370) - Machine stand, emergency stop push button and brake / €1,030 (Item 330.365) - Machine stand with water immersion tank / €360 DELIVERY: FREE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: used, Jaw chuck different versions Giodpfx Aob I Sdxjfnsn from 300mm to 500mm

Condition: good (used), Machine vice base plate, clamping plate, vise plate, rotary table -Rotary table: Turntable for vise -T- Round groove: Ø approx. 217 x 18 mm -Recess: Ø 90 mm -Degree display Gsdegwhvhopfx Afnein -Dimensions: 275/340/H90 mm -Weight: 20.6 kg

Condition: good (used), rotary table, rotary indexing table, controlled rotary table, rotary indexing table, rotary indexing table, indexing table, rotary table, compact rotary table -Manufacturer: Sopap, compact rotary table -Type: Ta 160-12-270-2-D -Clamping surface: Ø 240 mm, bolt circle Ø 200 mm / M12 -Speed: 8 rpm / 12 intervals -Brake: 40 Nm -Individual components: see photos -Dimensions: 700/610/H390 mm Gijdeu Huunopfx Afnen -Weight: 212 kg

Condition: used, machine/vehicle number: 2614, Round table, round dividing table, dividing head, dividing head Gedpjfnbymofx Afnoin -Table: Ø 300 mm -Bore center: Ø 62 mm -Height: 115 mm -Groove: 16 mm -Dimensions: 460/420/H115 mm -Weight: 61 kg

Condition: used, machine/vehicle number: 2614, Round table, round dividing table, dividing head, dividing head -Table: Ø 250 mm -Height: 100 mm Gedpfed D Nflsx Afnsin -Groove: 12 mm -Dimensions: 320/400/H100 mm -Weight: 33 kg

Condition: excellent (used), Lazy Susan Rotary Table Giodpohlp H Dsfx Afnjn Stainless steel frame Height adjustable legs Plastic top, diameter table: Ø 1500 mm Total dimensions: 1600 mm x 1500 mm

Condition: excellent (used), Lazy Susan Rotary Table Nylon top with dividers Distance between dividers: 60 mm Diameter top: 1250 mm Giedpfxjhlp Ips Afnon Height adjustable legs Total dimensions: 1250 mm x 1250 mm

Condition: excellent (used), Soco Lazy Susan Rotary Table Nylon top Giedpfjhlp I Nex Afnon Diameter top: 1200 mm Height adjustable legs Total dimensions: 1200 mm x 1200 mm.

Condition: good (used), NIKKEN 5-Axis Rotary Table 170 CNC incl. Controls Gijdoyfwu Iepfx Afnsn -Type: 5-Axis CNC / Rotary Table -The NIKKEN / 5 AX - 170 is a compact and robust CNC tilting rotary table for precise 4th and 5th axis milling and drilling operations. -Complete documentation available Dimensions: LxWxH 780x340x280 mm Subject to errors and input mistakes.

Condition: used, Year of construction: 2001, functionality: fully functional, NC rotary table Fibro 10.36.8 with face gear, year 2001 well maintained, very good condition, little used Pitch 120 teeth +/- 1" With hydraulic locking via face gearing, table top does not lift off Rotary table height 380 mm with substructure height 245 mm (total height 625 mm) Table size Ø 1180 mm Top table plate Ø 1300 mm, Table load approx. 5000 kg Table surface smooth, with dirt grooves with Siemens servo drive 1FT6105-8WF71-4EG2 and bevel gearbox Table speed max. 20 rpm with bevel gearboxes itot = 72 Tangential torque with motor operation 7200 Nm Total weight 3.800 kg Gsdjyg N Hrepfx Afnsin without fixators, without installation and commissioning

Condition: used, Year of construction: 1982, Technical details: Godpfx Afsvb A Uusnoin table length: 2200 mm table width: 2500 mm table load: 16 t total power requirement: 6,5 kW feed speeds: 1,25 - 160 mm/min rapid traverse speed: 2000 mm/min longitudinal adjustment: 1500 mm weight of the machine ca.: 12 t dimensions of the machine ca.: 4,1 x 2,65 x 0,95 m

Condition: ready for operation (used), Rotary Table, Table Rotator, Rotating Worktable , Used Machine Overall Dimensions: 1220x1220x325 mm Weight: 549 kg Electrical Data: 240 V AC Gjdpfx Ajv R Dwvjfnsin Worktable Size: 1220x1220 mm Table Rotation Direction: Bidirectional Table Rotation Speed: Infinitely adjustable Speed Limit: Adjustable

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Gisdpfjlccvmjx Afnsn Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: good (used), Translyft Rotary table scissor lift Gijdpfxsulz Eps Afnsn Translyft 3Tonne hydraulic scissor lift with rotary table, table diameter 1300mm, mounted on weigh cells with a scale, 3Ph

Condition: used, table diameter 5600 mm table load 150 t x-travel / mm total power requirement 88 kW weight of the machine ca. 55 t Round table dm 5600 mm / 150 to load Round table dia. 5600mm / 150 to load Equipment: Table with drive motor Status: closed since 1980 Machine Type:C.T.F Diameter core face plate: 3000 mm Diameter ring faceplate: 5600 mm Core and ring faceplate can be coupled: yes Faceplate divisible into segments: no Max. workpiece weight: 150000 kg Table weight approx.: 55000 kg Dimensions: Dm 5600 x H 1500 mm filming operation Speed: 0.1 - 20 rpm Rotation levels:4 Drive power: 88 KW Godpfx Afohmzkbonsin milling operation Speed: 0.0002 - 0.2 rpm Peripheral speed (5000 mm): 3140 mm/min Drive power: 11 KW

Condition: excellent (used), For sale: Professional CNC rotary table from the renowned brand Fadal Engineering (USA, subsidiary of Giddings & Lewis Inc.), model VH65. Equipped with a Röhm ZG Ø125 mm lathe chuck, significantly expanding application versatility. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Röhm ZG Ø125 mm lathe chuck – max 4000 rpm, torque 80 Nm • Serial number: 6660297 • Industrial multipin connector Condition: used, fully mechanically functional, normal signs of use. Sturdy, heavy-duty construction guarantees precision and long service life. Ready for use as an additional 4th axis in a machining center. Giedpfx Afow R Syionsn

Condition: new, Welding rotary tables increase work flexibility, productivity and quality. Rotary tables also support the welder at work and thus guarantee a safe working environment and better working ergonomics. The main advantage of PEMA rotary tables is that the workpieces can always be set in the best possible welding position. This can increase welding productivity by up to 70 %. 50 years of productive and high quality welding - for half a century we have been designing and manufacturing welding rotary tables for demanding and heavy workpieces. Pemamek welding rotary tables are a combination of modern design and reliable, efficient technology and can be easily integrated with any other PEMA solution. Each of our welding rotary tables is designed in-house and manufactured with high quality components. We have the PEMA representation for Southern Germany. We still have some old generation APS rotary tables in stock. Gjdpfx Afog Urz Hsnoin The new generation APSI are already in stock.

Condition: used, Year of construction: 2000, functionality: fully functional, OKAMOTO ACC 95DX Precision Surface Grinder – 400V For sale is an OKAMOTO ACC 95DX surface grinder. This is a robust industrial machine designed for precision surface grinding, making it ideal for toolmaking and manufacturing applications. The machine comes with a separate control console. Inspection and test run available by appointment. Machine Data: • Manufacturer: OKAMOTO Machine Tool Works, Ltd. • Model: ACC 95DX (Nameplate: ACC95DXM) • Serial number: 690277 • Voltage: 400 V • Phases: 3 • Frequency: 50 Hz • Total connected load: 8.6 kVA • Control/Auxiliary voltage: AC 100 V, DC 22/24 V (as per nameplate) Equipment / Notes: Gedpewtm Diofx Afnjin • Side-mounted control console (see photo) • Grinding head/safety enclosures included • Availability: immediate / by arrangement • Sale ex stock, subject to prior sale

Condition: used, Surface grinder, TOS BPH 20 NA, Used machine Manufacturer: TOS Type: BPH 20 NA Overall dimensions: Width: 1820 mm Depth: 1540 mm Height: 1800 mm Electrical data: 380V; 50Hz Table size: 835 × 250 mm Magnetic table size: 650 × 250 mm Giodpfox Hgvlex Afnsn Maximum grinding width: 250 mm Maximum workpiece height: 350 mm Max. table load: 180 kg Grinding wheel: 260 × 35 mm Machine weight: approx. 1600 kg Accessories: Coolant system Magnet chuck mounted on the table (650 × 250 mm)

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,000 kg, Column lift rotary device 1 tonne load capacity Protec turning device / positioner Syncrolift Double column, remote control wireless and manual Gijdpfxex Th N He Afnon Column adjustment: 2x movable Load capacity: 1000 kg Minimum working height: 600 mm Maximum working height: 1500 mm Speed: 1 rpm Clamping plate diameter: 500 mm Rotary drive: 0.37 kW Upon request, 2 to 10 tonne load capacities available