Used Room Equipment for sale (41,173)

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 171 h, load capacity: 2,500 kg, lifting height: 3,600 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,360 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Front tire type: Superelastic Gsdpfezmkmfsx Acmjui Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 80V Battery type: Lithium-ion Battery year of manufacture: 2021 Battery condition: 80 - 100% Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, safety light, lithium-ion technology.

Condition: repair required (used), Year of construction: 1999, functionality: not functional, KALLFASS KC5040/450 universal machine, manufactured in 1999, complete with operating manual, electrical wiring diagram, and parts list. Guedpjzmyguofx Acmsi The machine can be used as a source of spare parts or, with some skill, be restored for further use. Equipment and condition can be seen in the attached photos. The price is ex works, unpacked, and excluding VAT. If you have any questions or require additional detailed photos, please do not hesitate to contact us.

Condition: good (used), Year of construction: 2011, • Wohlenberg WB 92 TS cutting machine • Approx. 920 mm cutting width • Programmable control • Large stainless-steel work tables • Side tables Godpez Ei D Defx Acmeui • Waste/trim removal system • Conveyor system • Baumann material handling equipment • Baumann unloading equipment • Baumann jogging equipment • 4 cutting knives included The waste disposal/conveyor equipment is stated to date from approximately 2017. _____ BAUMANN PERIPHERAL EQUIPMENT The cutting system is complemented by professional Baumann handling equipment. Baumann Unit – Type BA 3N According to the machine plate: • Manufacturer: Heinrich Baumann • Type: BA 3N • Machine No.: 1322 • Voltage: 400 V / 3N~ • Frequency: 50 Hz • Rated current: 9 A • Power: 3 kW • Stated load: 1,000 N • Made in Germany The exact year is not shown on the visible nameplate. Unloading Equipment The owner states that the unloading unit is approximately 10 years older than the main cutting machine. Jogging Table The owner states that the Baumann jogging equipment is approximately 20 years older than the main cutting machine. These age indications are based on information supplied by the machine owner and should therefore be considered approximate. _____ INCLUDED TOOLING A particularly useful part of the package is the knife set: 4 x cutting knives included This reduces the buyer's initial need for additional cutting tools and provides spare knife capacity for ongoing production. _____ WHY BUY THIS CUTTING LINE? Complete Production Package Instead of purchasing only a stand-alone guillotine, the buyer receives a complete cutting and material-handling solution with peripheral equipment. Proven German Technology Baumann and Wohlenberg equipment is widely used in professional printing and finishing operations and is known for its robust mechanical construction. 920 mm Production Class The 92 cm cutting format is highly versatile and suitable for a wide range of commercial printing, digital printing, bookbinding and finishing applications. Material Handling Included The additional Baumann equipment can significantly improve workflow compared with operating a stand-alone cutting machine. Waste Handling & Conveyors Integrated peripheral systems help reduce manual handling around the cutting process and improve production organization. Four Knives Included _____ SUITABLE APPLICATIONS The system can be used for: • Commercial print finishing • Digital print finishing • Bookbinding • Brochures and catalogues • Sheet cutting • Printed paper • Cardboard and light board applications • Short- and medium-run finishing • General post-press production _____ FGT VALUE – MORE THAN JUST A MACHINE Purchasing used graphic machinery internationally involves more than simply buying equipment. FGT Graphic Machinery can support the complete project from inspection through delivery. Our services can include: • Technical machine evaluation • Inspection coordination • Machine demonstration • Professional dismantling • Preparation for transport • Packing • Loading • International truck transport • Sea freight • Export documentation • Customs preparation • Installation coordination • Technical support _____

Condition: good (used), functionality: fully functional, power: 30.89 kW (42.00 HP), fuel type: diesel, gearing type: hydrostat, Year of construction: 2015, operating hours: 444 h, Equipment: all wheel drive, HAKO Citymaster 1250 Municipal vehicle with winter service equipment Guodsz D Dltepfx Acmoi - KIF Vario wedge snowplow with a clearing width of 145 cm - KIF box spreader - Tipper body This Hako Citymaster 1250 was first put into operation in 2015, has approximately 444 total operating hours according to the meter, and is in good overall condition with the usual signs of wear and tear. It has just undergone a minor service and is ready for immediate use. The sale is made as a used machine, excluding any return, warranty, or guarantee. - Net price: €27,900 // Gross price: €33,201 - Inspection / test drive is possible - Nationwide shipping can be arranged; the costs depend on the distance. - We would be happy to have our leasing partner prepare an attractive leasing / financing offer for you!

Condition: used, functionality: fully functional, color: orange, empty load weight: 880 kg, loading space volume: 4.1 m³, Year of construction: 2014, Salt spreader: + Epoke + Virtus City AST + Year of manufacture: 2014 + 4,100l salt container Godpfx Acez Da Absmoui + Unladen weight: 880 kg + Support legs + Amber warning light + Control panel + Operating manual + From municipal ownership Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: excellent (used), Year of construction: 2018, operating hours: 2,937 h, functionality: fully functional, machine/vehicle number: S2550XJ, total length: 1,700 mm, total height: 2,000 mm, type of input current: three-phase, input voltage: 400 V, input current: 5 A, overall weight: 700 kg, input frequency: 50 Hz, table width: 1,140 mm, For sale: Beck Packautomaten S2550XJ automatic packaging machine, manufactured in 2018. This machine is designed for the automatic film packaging of products. It is a unit from the renowned German manufacturer Beck Packautomaten GmbH & Co. KG and is equipped with a Siemens HMI control panel. Machine details: • Manufacturer: Beck Packautomaten GmbH & Co. KG • Model / Type: S2550XJ • Year of manufacture: 2018 • Operating time: 2,937 hours Gsdpfxsz D Uvij Acmoui • Voltage: 230/400 V • Frequency: 50 Hz • Current: 5 A • CE marking • Control panel / Siemens HMI • Automatic film packaging system Condition: Used, in very good technical condition. The machine . A video showing the machine in operation is also available upon request. The buyer is responsible for arranging transport and the collection/dismantling of the machine.

Condition: like new (used), Year of construction: 2003, x-travel 850 mm y-travel 700 mm z-travel 500 mm Control Heidenhain iTNC 530 tool taper HSK 63 voltage 400 V control voltage 24 V weight of the machine ca. 10,5 t - Current configuration C 40 U: o Vertical machining center o 4 axes o Travel ranges: X 850 mm, Y 700 mm, Z 500 mm o Table size: X 1070 mm, Y 700 mm o Carousel tool magazine, 40 positions Guedpfjz Ebrasx Acmsi o Max. tool length in magazine: 300 mm o Spindle: HSK63, 10,000 rpm, 25 kW, 159 Nm o Coolant system: AK, IKZ 40 bar, 1,000-liter capacity, steel filter o Blow-off air IK & AK o MMS system MHT o Scraper belt chip conveyor o Polycarbonate disc without Rotoclear o Heidenhain iTNC 530 machine control o Emulsion mist extraction (Preparation) o Installation dimensions with coolant system: 3,930 mm x 4,400 mm x 3,040 mm o Laser measurement system for tools, including breakage detection o 3D measuring probe o Spindle hours: 14,578 h o Machine hours: 47,069 h

Condition: used, functionality: fully functional, Complete primary crushing plant, including a loading hopper with truck tilting mechanism, feeder, and crusher, as well as a discharge conveyor. Gujdpfx Ace Adqmksmji The plant is installed on steel skids and includes a supporting structure and operator control panel.

Condition: used, Year of construction: 2010, Used Tetra Pak Helix Accumulator 47 Meters Year 2010 The Used Tetra Pak Helix Accumulator 47 meters year 2010 optimizes container flow in high capacity bottling lines. Specifically, it balances the production line efficiently, ensuring constant movement between different machines. As a result, it reduces downtime and increases overall plant productivity. Moreover, it enhances operational consistency, which improves overall efficiency. Tetra Pak, a global leader in bottling and packaging solutions, manufactured this model ACHX 30 to provide robustness and reliability. Notably, its helical structure compacts and efficiently accumulates containers while minimizing space usage. Furthermore, with a length of 47 meters, it manages large volumes of containers, ensuring a continuous flow even during format changes or maintenance operations upstream or downstream of the line. Therefore, it guarantees productivity without unnecessary interruptions. Operation and Technical Features of the Tetra Pak Helix Accumulator The Tetra Pak helix accumulator moves containers smoothly using a spiral system. Consequently, it prevents bottlenecks and reduces the risk of product damage. In addition, the helical configuration distributes the load evenly, maintaining a constant flow. This is particularly important for high speed bottling lines, where interruptions could cause productivity losses. Godpfx Aov Dab Recmsui Technicians have revised the Used Tetra Pak Helix Accumulator 47 meters year 2010, ensuring operational reliability and compliance with current safety standards. Although it remains in storage, it is ready for immediate integration into a new production line. Moreover, the revision process included critical components such as motors, conveyor belts, and sensors. By doing so, this thorough maintenance guarantees long lasting and high performance operation. As a result, it minimizes the risk of mechanical failures. Integration into Bottling Lines The ACHX 30 model integrates seamlessly into various bottling line configurations. Indeed, its 47 meter length provides high accumulation capacity, reducing the impact of sudden machine stops downstream. For this reason, the rest of the line continues operating without interruptions, maximizing production efficiency. Additionally, this design reduces downtime significantly. Furthermore, this Tetra Pak Helix Accumulator manages the flow intelligently, maintaining a consistent production speed. In other words, it minimizes load variations on filling and packaging machines, which prolongs the operational life of mechanical components. Consequently, it reduces maintenance costs while maintaining high productivity levels. Moreover, it optimizes energy consumption, contributing to cost efficiency. Conclusion of the Tetra Pak Helix Accumulator The Used Tetra Pak Helix Accumulator 47 meters year 2010 efficiently optimizes container flow in bottling lines. Because of its full revision and advanced technical features, it ensures smooth and secure container accumulation. Moreover, it consistently improves overall plant efficiency. As a result, industry professionals choose this model for its high performance and cost efficiency, making it a strategic asset in modern bottling operations. Ultimately, it provides a reliable and effective solution for high capacity production lines.

Condition: used, Year of construction: 2013, Overview  This complete brewhouse was manufactured between 2011 and 2013 by various European manufacturers, including spanish manufacturer SlowBeer. It is for sale as the current owner is unable to dedicate sufficient time to its operation due to other business commitments. The brewhouse is currently dismantled and stored in Spain. Optional services such as dismantling, transport, and installation are available upon request. Technical data  - Brewhouse capacity: 250 liters per batch - Production cycle: approx. 2 weeks per batch - Bottling cycle: 1 day per batch - Production months/year: 10 months - Shelf life of beer: 18 months - Heating method: Electric (1 Hot Liquor Tank used), Butane option available (unused) - Fermentation tank capacity: 500 liters each (3 tanks) - Brewing system power: 15 kW - Cooling system power: 2.3 kW - Labeling power: 2 kW Scope of Delivery  - 1 x Brewing Unit | SlowBeer | MB 250 E | 2013 Guodpfx Aewcyc Docmei - 1 x Plate Heat Exchanger | Sondex Italia | S4A-IG16 | 2013 - 3 x Fermentation Tanks | — | — | — (500 L each, atmospheric) - 1 x Cooling Unit | Winus | C2-W3R 4T | 2012 - 1 x Isothermal Hot Water Tank | Industrias Céspedes | — | 2011 - 1 x Labelling Machine | CDA | R1000 | — - 1 x Filling Machine | Toscana | — | — - 1 x Manual Capping Machine | — | P0085 | — - 1 x Coder | — | MC150V | 2013 - 1 x Electric Mill | SOMMER | 11717 | — - 1 x Compressor | FINI | — | — - 1 x Compressor | MADER | YL90S-2 | 2012 (100 L tank) - 1 x Steel Water Heating Tank | — | — | — (900 L) - 2 x Water Softeners | — | — | — - 2 x Hot Liquor Tanks | — | — | — (1 electric, 1 butane-based – unused) Optional Services: Dismantling, transport, and installation – available upon request.  

Condition: used, Year of construction: 1989, x-travel 350 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 280 mm spindle taper SK 40 150 - 1660 U/min feeds 25 - 285 mm/min rapid traverse 1 m/min quill stroke 80 mm milling-head swivable +/- 45 ° Gsdpfxjvzhids Acmsui total power requirement 3 kW weight of the machine ca. 1,2 t dimensions of machine L x W x H 1,27 x 1,1 x 1,65 m Accessories: vertical head with quill retraction, solid table, univ. table, rotary table 250 mmø, dividing unit with 3-jaw chuck 135 mmø, counter bearing, various tool fixtures, drill chuck, coolant

Condition: used, x-travel 700 mm y-travel 250 mm z-travel 300 mm table-size 1000 x 230 mm spindle taper ISO 40 spindle turning speed range 35- 1500 U/min total power requirement 3,0 kW weight of the machine ca. 1,4 t dimensions 1,55 x 1,4 x 1,65 m Universal Milling Machine - Huron Head - Mounting Fixture for Huron Head - Horizontal Counterholder - Documentation Gsdpsv T Nqyefx Acmsui - Coolant System - Machine Feet

Condition: new, Bott vehicle equipment: - H 1602 x L 1039 x W 377 mm Guedpfxov T Udrs Acmei - With 4 folding shelves

Condition: used, Year of construction: 2024, _____Basic equipment: Frame with ploughshare Hydraulic swivel device left-right Hydraulic installation with quick hydraulic couplings in accordance with DN10-ISO7241-1A Curbstone deflector left-right Three-point attachment plate CAT 2N, 2 and 3N in two mounting heights / for MG-150 to -210 CAT 1N, 1 and 2N OR municipal attachment plate F1, F2 in accordance with EN15432-1:2011 (formerly DIN 76 060, size 3) with lifting system for tension-free lifting and lowering Pressure relief valve Cylinder in strong design, double-acting Pendulum compensation up to 18° Adjustable skids Attachment device screwed Warning flags with holder Parking foot Municipal paint RAL 2011Special equipment:Equipment subject to surcharge:Euro mountWheelsLED lightingPU scraper barsAlso available as a three-point attachment!Price from 7,013.00 (net)The picture serves as an example, can contain special equipment.,Storage location:null Guedsu Ebkmepfx Acmsi

Condition: new, neu 2486 prompt, Zwischenverkauf v 545 € Guedpfx Aowirlqjcmsi 1 28 mm Tools are not included in the price.

Condition: used, Year of construction: 2024, _____TK-III 340, three-point attachmentBasic equipment: Frame with 3 ploughshares Hydraulic swivel device left-right Hydraulic installation with quick hydraulic couplings in accordance with DN10-ISO 7241-1A Curbstone deflector left-right Three-point attachment plate CAT 2N, 2 and 3N in two mounting heights Pressure relief valve Cylinder in strong design, double-acting Pendulum compensation up to 14° Additional springs for lateral inclination in the pendulum system Adjustable skids Warning flags with holder Parking foot Distance block for stop angle 36° Municipal paint RAL 2011 Steel scraper barEquipment subject to additional charge:Wind deflectorAlso possible with DIN attachment!Price from 13,408.00 (net)The image serves as an example, can contain special equipment.,Storage location:null Godsu Ebktjpfx Acmjui

Condition: used, mileage: 543,681 km, power: 90 kW (122.37 HP), first registration: 06/1997, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 10/2021, color: orange, gearing type: mechanical, number of seats: 2, total width: 2,370 mm, total height: 3,260 mm, Equipment: parking heater, * Rear view camera * Rotating beacon * 5-speed manual transmission * Leaf suspension ----* Honda R.V. generator with 7,534 operating hours * Office with PC & control units * Schäfer Kommunaltechnik Drain Jet 100, year 1997 * 2 jetting heads * Jetting pump & hoses ----* Tire size: 225/75R17.5 Godpfx Aovhv Ibjcmeui * Overall length: 7,000 mm ----- Subject to errors and prior sale, vehicle number 5711 WhatsApp support available! If you have questions about the vehicle or need more information, feel free to message us via WhatsApp Whatsapp Whatsapp

Condition: new, number 10 Stk. clamping range 15 - 50 mm 28 mm weight 10 kg dimensions 0,3 x 0,3 x 0,2 m Basic set 4 / 53 pieces for table top thickness 15mm and 25mm 6 pcs screw clamps 14 pcs. quick clamping bolts 2 pcs. universal stop 100mm 6 pcs. universal stop 150mm 6 pcs. universal stop 225mm 2 pcs. universal stop 300mm 6 stop and clamping angles 175mm 4 stop and clamping angles 275mm 2 pcs. prisms 60mm Guedsvki E Espfx Acmoi 1 piece torch holder 1 pc. Eccentric stop 100mm diameter 1 piece perforated brush 30mm 2 pieces separating lotion 500ml, on a natural, biological basis 2 pcs. Welding table cleaner 500ml, on a natural, biological basis

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 525 mm z-travel 500 mm table surface area 1000 x 543 mm spindle taper SK 40 spindle taper DIN 69871 spindle turning speed - stepless 20 - 12.000 U/min feed X/Y/Z-axis 20 - 10.000 mm/min rapid traverse X/Y/Z axis 18 / 18 / 15 m/min table load max. 350 kg control HEIDENHAIN MillPlus Guodotqqmhopfx Acmsi milling-head swivable +/- 90 ° total power requirement 26 kVA weight of the machine ca. 4,2 t dimensions of machine L x W x H 2,95 x 2,1 x 2,26 m Accessories: various tool fixtures, coolant

Condition: used, Year of construction: 1981, x-travel 800 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 150 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min Gedstqqplspfx Acmjui rapid traverse vertical 4 m/min quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,1 t dimensions of machine L x W x H 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Guedpez Rnu Tjfx Acmsi Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1731118200, input voltage: 24 V, year of last overhaul: 2022, input frequency: 50 Hz, Equipment: documentation/manual, Labeling machine for round products for sale A high-performance labeling machine for the automatic labeling of various round products is for sale. The machine is suitable for, among other things: - Sausages Guedjz Nlprepfx Acmsi - Bottles - Candles - Rolls and other cylindrical products Currently, the machine is used for labeling sausages. It is in very good and well-maintained condition and is still in daily use. This allows the reliable function to be verified under real production conditions. Depending on the design, different product diameters and lengths can be processed. The machine is therefore flexible and suitable for both existing production lines and various product variants. If you are interested or would like further information, please do not hesitate to contact us. An inspection of the labeling machine is possible after prior appointment.

Condition: new, number 96 Positionen weight 600 kg condition neu Gedpfx Acjygxz Someui 28 mm Special 31-piece set, 28mm system, consisting of: 1x Tool trolley 10x Locking pins 10x Ball lock pins 3x Professional screw clamps, 300 x 150mm 3x Professional screw clamps, 300 x 200mm 2x Professional pipe clamps, 180° 2x Professional pipe clamps, 45° Material: Burnished quality steel ATTENTION!!! Tools are designed for 25mm thick tabletops.

Condition: used, Year of construction: 2002, x-travel 400 mm y-travel 320 mm z-travel 440 mm table-size 80 x 325 mm spindle taper ISO Sk 40 spindle turning speed range 63 - 3150 U/min quill stroke 60 mm weight of the machine ca. 1,5 t dimensions 1,8 x 1,8 x 1,9 m Universal Milling Machine - Digital Display - Hydraulic Tool Clamp - Central Lubrication - Coolant System - Machine Light - Machine Feet - Counter Bearing - Chip Tray Gsdpfx Acew Tdxiemjui

Condition: used, x-travel 400 mm y-travel 400 mm z-travel 300 mm rapid traverse 1,2 m/min feed range 5 - 500 mm/min creep feed 1:100 tool taper ISO 40 Godpfx Acjxv D Uzjmeui stroke v60 h70 mm table - universal ca. 620 x 320 mm table vertical adjustable 350 mm weight of the machine ca. 1200 kg Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment