Used Rolling Tools for sale (41,560)

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 620050039, overall weight: 2,550 kg, Thread rolling machine PeeWee type P20SR, used, well-maintained, low operating hours (no hour meter installed), fully functional. Can be inspected and tested under power. Forklift loading included. Includes operating manual/wiring diagram. Includes 20 sets (40 pieces) of thread rolling dies (new price per set approx. €1,100). Ibjdpfx Aexalinjacsc

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Ibjdpfxeh A S Htj Aacjc Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: excellent (used), • Type: SK40-2/20-70 (DIN 69871) • Taper: SK40 • ER collets included (various diameters, complete set) • Tools mounted in holders – drills, milling cutters, counterbores (visible in the photos) • Holder length: 70 mm • Set ready for use – just mount in your CNC machine • Condition: used, very good, complete (minimal signs of wear) • Individual pieces or the whole set available for purchase • Price per item. Isdpfxoxa H H Ue Aacebc

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 1800 mm Measurements depth 5400 mm Measurements height 1950 mm Machine weight 8500 kg Main Drive Spindle motor power 11 kw Additional Equipment Teach-In NC control for automated bending processes (optional) Mechanical auxiliary arm for handling heavy workpieces (optional) Hydraulic side supports for stabilizing long sheets (optional) Infinitely adjustable bending speed (optional) General Data Measurements width 1800 mm Measurements depth 5400 mm Measurements height 1950 mm Machine weight 8500 kg Main Drive Spindle motor power 11 kw Additional Equipment Teach-In NC control for automated bending processes (optional) Mechanical auxiliary arm for handling heavy workpieces (optional) Ibsdpfoxd Ib Iex Aacjc Hydraulic side supports for stabilizing long sheets (optional) Infinitely adjustable bending speed (optional) This Metallkraft RBM 4 HMS Pro 3050-150 plate rolling machine was manufactured in 2022. It features a robust welded construction, induction-hardened rollers, and a hydraulic drive for the upper roller. The machine includes three digital displays for precise roller adjustments and a hydraulic folding plate for easy workpiece removal. Ideal for heavy industrial use with options for conical bending. Contact us for more information about this machine. Application Types Rolling

Condition: used, functionality: limited functionality, Year of construction: 2011, Manufacturer: OK MACHINE Ibedpfx Aexctvbjacec Maximum sheet length: 1500 mm Maximum sheet thickness: 3 mm Number of rollers: 3 Roller diameter: 150 mm

Condition: good (used), 082 USED Rolling machine, croissant machine, baguette machine. Automatic machine with control panel. EXTERNAL DIMENSIONS (in cm.): - height 140 (max: 150), - width 120 - length: 195, - left wing: 84/63 - right wing: 74/64 The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... Ibjdpjwgcwrefx Aacec bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, Complete price for all existing tooling in total approx. 180 tools - exact listing on request. KELCH drill holder for insert drill SK 50 X 32 X 100 intermediate sleeve for SK with extraction thread SK 50 X SK 40 X 40 Intermediate sleeve for MK with extraction flap SK 50 X MK 4 X 95 KELCH Intermediate sleeve for MK with extraction thread SK 50 X MK 1 X 45 MAZAK intermediate sleeve for MK with extraction thread SK 50 X MK 3 X 69 KELCH intermediate sleeve for SK with pull-out thread SK 50 X SK 40 X 70 MAZAK drill holder SK 50 X 32 X 100 Chuck for collet SK 50-2/20-160 KELCH slip-on cutter arbor SK 50 X 50 X 60 KELCH arbor for arbor SK 50 X 50 X 40 Iedpfx Aaef Hndujcjbc

Condition: used, Frame die-cutter - Swivel frame die-cutter - Flatbed die-cutter - Platen die-cutter - Eccentric press Punch + feed for the use of bandknife punching tools Flatbed die cutter HELMERDING type PSH 25 Com. No. EP 97784 Machine. No. 6073 Year of construction 1998 Compressive force 25 ton. Clearance between the tie rods 700 mm Table surface = installation space 800 x 670 mm Table surface = installation frame width 510 x depth 440 mm, plate thickness 20 mm Plunger surface 800 x 670 mm Hole in the table 490 x 420 mm Plunger stroke 45 mm Ram adjustment travel 10 mm Installation height = tool height 100 mm Stroke rate up to 250 strokes/min. Motor power 15 kW Mains connection 400 Volt, 50 Hz - Controlled drive for infinitely variable stroke rate - Pneumatic clutch-brake combination - ram compensation cylinder - VOGEL automatic central lubrication system - solid base plate with 4 swinging elements under the machine Space requirement L x W x H approx. 3000 x 2000 x 3000 mm Weight 4.5 tons good condition The machine was formerly used for cutting out cardboard blanks. Ideal for cutting out non-woven fabrics or similar for breathing masks. Ibodpfx Aedzqmzeacoc

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Klingelnberg ZW 301 Gear Measuring Machine with Evaluation Computer Double-flank gear measuring machine with 4-position indexing table - Spur gear - Internal gear - Gear shaft - Computer (evaluation via industrial PC with fully automatic parameter calculation, quality determination, and classification) Workpiece data: Table load including fixture, max. 100 kg Load on support plate/vertical slide including fixture, max. 80 kg Workpiece knife with counterholder on measuring and feed slide, max. 300 mm Workpiece knife with counterholder on machine bed, max. 300 mm Device data: Heidenhain LIF 101 position measuring system Center distance min./max. 45/300 mm Table diameter 150 mm Table height above floor 950 mm Measuring pressure min./max. 5/30 daN Ibjdpfx Asv Ic R Aeacoc Total connected load of the test device: 0.75 kVA Total space requirement: LxWxH 1900 x 1200 x 2200 mm Net weight: 750 kg PC, as well as some master wheels with common modules. Weight: 750 kg

Year of construction: 1994, condition: good (used), Plate rolling machine Seroma - Expanding Pipe expansion stretcher Ø 1200 mm MACH-ID 6507 Iodpfswvhwvsx Aacobc Make: Seroma Type: Expanding Year: 1994

Year of construction: 2000, condition: excellent (used), LVD Delta 1250 in perfect condition with many tools. X Y - 2500 x 1250, plus reposition Ibodpjrgqrnsfx Aacjc 2 x Indexing head

Condition: excellent (used), Year of construction: 2014, 126 USED Koenig belt dough rounder, bread rounder: model BRW 2200. Year of manufacture: 2014 Ijdpfx Aasw Sy A Uscsbc EXTERNAL DIMENSIONS (in cm): - L:280, - W: 70, - H: 174 cm. - working length approx. 260 cm. EQUIPMENT: - flour duster - belt speed adjustment - belt pressure adjustment The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: used, details on request Ibodpfx Aajdbmyzocec

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Ibedpfxeuz If Ns Aacjc Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC Thread, Gear, and Profile Rolling Machine Model ROLLEX 1 Substructure: The substructure of the thread and profile rolling machine consists of welded steel profiles, partially covered with sheet metal. The space for the process lubricant reservoir is located in the front area of the substructure. Main drive: The main drive generates the rotary motion of the rolling tools required for gear rolling. The drive motor is flanged to the base plate of the rolling spindle bearing via the Cyclo Drive gearbox. The rotary motion is transmitted to the rolling spindle via the Schmidt coupling. The machine operates in a speed range of 0 to 30 rpm, with this range further subdivided into 0 to 20 rpm for continuous operation (S1) and 20 to 30 rpm for intermittent operation (S4). The speed is continuously adjustable using a frequency converter. Brand PROFIROLL Type ROLLEX 1 Year of manufacture 2003 Control, Brand, Type Siemens, Sinumerik, 840D Motor power (kW): 18 kW Electrical connection: 400 V Rolling range: Max. rollable workpiece diameter: 40 mm Rolling carriage stroke: 2 x 80 mm Min. / max. center distance of rolling spindles: 160 / 320 mm Rolling spindle height above the machine bed: 160 mm Max. tool diameter: 250 mm Rolling spindle mounting diameter: 120 mm Rolling spindle mounting length: 80 mm Power & Drive Max. rolling force: 100 kN Rolling spindle speed, continuously variable 0-30 rpm Motors Ibodpfx Aaov Uxq Socsc Rolling spindle drive: 2 x 13 Nm Hydraulics 50 Hz: 5.5 kW Process lubrication 50 Hz: 0.1 kW Central lubrication 50 Hz: 0.06 kW Temperature range: +5–+40 °C Current type/frequency: 3 N/50 Hz Nominal voltage: 400 V Control voltage: 24 V Auxiliary voltage: 24 V/230 V Connected load: 18 kW Nominal current of the machine: 39 A

Year of construction: 2003, condition: excellent (used), Quick relief for broken tools The eromobil® metal eroder removes broken taps, twist drills and more in minutes without damaging the workpiece. A professional solution to minimize production disruption and avoid rejects. Easy to use The hollow copper electrode is clamped in the oscillating head. It has a smaller diameter than the broken tool. During eroding, the core of the broken tool is destroyed. The cutting edges loosen and can be easily removed. The electrode is not in contact with the workpiece, so the thread remains undamaged. Ordinary drilling emulsion is used as a coolant. Iedpfoulculsx Aacsbc Wide range of possible applications eromobil® is an erosion device for fast and effective use in column and radial drilling machines, milling machines, boring machines, magnetic drilling machines and special machines. Tool breakage is a problem in many industries - eromobil® is the solution. Whether it's in the production of parts in mechanical engineering, apparatus and plant construction, or in the automotive industry, tool breakage and getting stuck in expensive items happens in almost every company and business. Technical specifications Choose from two available variants of the eromobile - depending on the power you need or the size of the threads you want to zero.

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: M24I/9053, Offer Number: M24I/9053 Machinetype: thread rolling machine - 2 rolls Make: BAD DÜBEN Type: PRX 32 E CNC Constr. year: 2002 diameter range: 10-24 mm Forging power: 7-20 to thread length plunge method: 195 mm daylight: 160 mm max. pitch: 3,5 mm roller bore: 80 mm roller width: 235 mm roller length: 195 mm rpm: 40 - 315 Ijdpfx Aasw Nxnwocebc Location: Germany

Condition: ready for operation (used), Various wood milling tools are available for a Homag DEP. Spindle diameter: 35mm/50mm, tools: cutter set for longitudinal machining/replacement knives/milling tools. Documentation available. On-site inspection is possible. Ijdpfxjufqfqj Aacjbc

Condition: used, Writing desk, mobile desk, shelf trolley, logistics trolley, shelf trolley Transport trolleys, platform trolleys, workshop trolleys FETRA type 5834 Writing surface height: 1100 / 1190 mm Writing surface: 605 x 585 mm Shelves: 600 x 495 Load capacity per shelf: 50 kg Total load capacity: 100 kg - Rolling desk made of tubular steel and sectional steel - Screw construction, powder-coated, blue RAL 5007 Isdpspflp Ejfx Aacebc - Writing surface on wooden board with stop bar, inclined approx. 10 - 2 shelves, can be screwed in variably (2 file heights possible) - 4 swivel castors (Ø 125 mm) with plastic rim and rubber coating on the running surface - 2 fixed castors with brakes Space requirement L x W x H: 600 x 600 x 1190 mm Weight: 25 kg Very good, as new condition 8 pieces available, price per piece

Condition: excellent (used), For sale: a set of 3 professional AMP / TYCO Electronics handheld crimping tools for industrial, automotive, and workshop applications. Original tools with EDB Electronic service documentation – each dedicated to a specific range of wires and contacts. Isdpfx Aasw Svapecjbc

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: M50E/9046, Offer Number: M50E/9046 Machinetype: hot rolling machine Make: SKF Type: EMB 110 Constr. year: 2001/2021 diameter range: 110 mm Ibedow Nxiuopfx Aacjc max. outside dia. of round pieces: 110 mm kind of heating: 335 KW Location: Europe

Condition: ready for operation (used), Year of construction: 1994, A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible. Ibodpfxowtg Hws Aacec

Year of construction: 1974, condition: ready for operation (used), A Schwabenthan laboratory rolling mill is available. Roll width: 110mm, roll length: 350mm, roll diameter: 110mm, roll speed: 27rpm, bottom-roll axle distance: approx. 1200mm. On-site inspection is possible. Iodpfx Aaowmqw Tscjbc

Year of construction: 2025, condition: ready for operation (used), A baguette long rolling machine in mint condition for the long-molded forming of dough pieces for the production of baguettes is available. Table dimensions X/Y: approx. 1600mm/850mm, long rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, max. gap opening: 75mm, weight: approx. 100kg. Documentation available. On-site inspection is possible. Ibedpfx Aaswihz Iecsc

Year of construction: 2001, condition: ready for operation (used), A Bühler reversing strip rolling mill retrofitted in 2020 is available. Working speed: 10m-50m/min, working direction: reversing. Quarto roll stand: backing roll diameter: 160mm, working roll diameter: 80mm, roll bale width: 80mm, drive power: 20kW, setting speed min./max.: 2mm/min/25mm/min, brush diameter: 125mm. Reversing coiler drum diameter: 500mm, reversing coiler belt tension: 1000N-8000N, reversing coiler power: 30kW, material rewinding spread range: 300mm-600mm, cooling lubricant system power: 35kW. Tolerance for measuring length 8mm/50mm: +/-0.5µm and +/-1.5µm, absolute thickness tolerance: +/-30µm. Material width min./max.: 20mm/60mm, max. material thickness: 2mm, coil inner diameter: 500mm, coil outer diameter: 750mm, max. coil weight at strip width 40mm: 75kg. Operating hours of the system since the retrofit (2020): 91h. Documentation available. On-site inspection is possible. Expected to be available from September 2025. Iodpfx Aaswqf Unecebc