Used Rolling Mill for sale (5,856)

Condition: refurbished (used), PICOT rolling machine Tjdpfjvt Sqpex Ahuof Machine under construction Type RPS 2006 G Useful length 2000mm Max thickness 6mm Max end diameter 4mm Roller diameter 160mm Mim radius 80mm

Condition: used, Year of construction: 2011, Profiling machine in good condition Specification Model: Schlebach Quadro LT Made in: Germany Product width: 540 mm Tsdpfx Aew E H Dashusf Cutting: circular shears Weight: 910 kg If you have any further questions, we will be happy to answer them.

Year of construction: 1994, condition: good (used), Plate rolling machine Seroma - Expanding Pipe expansion stretcher Ø 1200 mm Todpfswvhwvox Ahuef MACH-ID 6507 Make: Seroma Type: Expanding Year: 1994

Year of construction: 1973, condition: ready for operation (used), A Troester mixing mill is available. Including strip cooler, year of manufacture: 1993. An on-site inspection is possible. Todpfx Aexdc Uiehuef

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Automatic bending machine Co.ma.l Four Matic - 4 rolls (2 with diameter 30 mm / 2 with diameter 37 mm) Tsdpoxdr Skjfx Ahusf - Effective bending length: 500 mm - Minimum bendable diameter: 40 mm - Automatic cycle management - Pedal operation - Digital position display Machine has been used very little and is in good preservation condition. Original documentation and user & maintenance manual are available.

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Todsh A S Htepfx Ahuef Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Year of construction: 1998, condition: used, functionality: fully functional, machine/vehicle number: 10302038, Offered is a 3-roll mill from Bühler AG, year of manufacture 1998, and a press from geiger Maschinenbau AG, year of manufacture 2004. Both machines are in used condition and are currently not in operation. In terms of safety, the machines are up to the latest standards. Both machines are ready for operation. - 1300 mm roll width - max. 75 kW drive motor An inspection of the machines is possible upon request and by appointment. For further questions, we are at your disposal. Tedpfx Aoxb Rc Ashusf

Condition: used, functionality: fully functional, Year of construction: 2004, For sale: CNC Rolling Machine FARMAR (Famar S.N.C.) Condition: Used, in good technical working order, ready for operation. Reliable, robust construction from Italian manufacturer Famar S.N.C. The rolling machine is designed for bending and forming sheet metal and plates. Capable of rolling both round and oval workpieces. The roller covers are damaged; it is recommended to replace the coating. Technical specifications: Year: 2004 Working length: 1300 mm Maximum pre-bending thickness: 0.5 mm Maximum rolling thickness (Kr = 40 kg/mm²): 1 mm Central roller diameter: 80–90 mm Side roller diameter: 90 mm Total machine length: 2150 mm Machine width: 1000 mm Machine height: 1100 mm Working table height: 1000 mm Hydraulic system motor power: 1.5 kW Working speed: 5.5 m/min Pre-bending speed: 2400 mm/min Tjdpfoxlif Dsx Ahusf Power supply voltage: 380 V Frequency: 50 Hz Weight: 1300 kg Application: The machine is designed for rolling, bending, and manufacturing cylindrical shapes from sheet metal. Suitable for steel, aluminium, and other materials up to 1 mm thickness. Ideally suited for small and medium-scale production where precise, repeatable rolling results are required. If you have any further questions, please feel free to contact us.

Condition: reconditioned (used), machine/vehicle number: 550-235-ELD, GENERAL CHARACTERISTICS workpiece Ø max. 41 mm Range Module máx/min. 1,5 / 0.39 Rack face width 92 mm Tedpfx Ajd Nw Ttohujf Manufacturing No. 550-235-ELD Máx/min. pitch form 20/40-32/64 Maximum stroke of tools trolley 760 mm Rack length máx. 610 mm ELECTRICAL CHARACTERISTICS Main motor power 15 Cv

Year of construction: 1985, condition: used, Working width 2000 mm Roller width 2200 mm pressure 50 t Pressure line 230 N / mm Number of rollers 3 Stück Upper roll 280 dia Roller covering Stahl, verchromt Heating - upper roll Thermoöl Middle roll NIPCO-Walze , 500 mm dia Roller covering Polyamidmantel Lower roll Stahl dia diameter of lower rolls 280 mm Roller covering Schreiner-Gravur Clouth speed max.100 m/min Tedpjw Df Ubofx Ahuof Weight 26 to dimensions of the machine ca. 6,0 x 8,0 x 3,3 m 3-roll calender with 2 steel rolls, upper steel roll smooth - chrome-plated, lower steel roll with carpenter engraving, heating with thermal oil (via heat exchanger), middle roll as NIPCO roll, this can be rotated by 180°, for use in the upper or lower roll nip, infeed with working platform, triple profile spreader holders + metal detector E&L, outfeed with hydraulic MENZEL Sochor winder,

Condition: like new (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: RB3 L CNC-S, Thoman Profile Bending Machine RB 3L CNC-S – CNC-Controlled Precision Bending Machine For sale is a high-quality profile bending machine from the manufacturer Thoman – Model RB 3L CNC-S. This machine is ideal for precise bending of profiles, tubes, and flat materials in a wide variety of radii – suitable even for repeat-accurate series production, thanks to its CNC control system. Technical Data (excerpt): Manufacturer: Thoman GmbH Model: RB 3L CNC-S Control: CNC-controlled (fully automatic bending sequences can be programmed) Number of bending rolls: 3 Drive: Hydraulic / Servo (depending on configuration) Bending direction: Horizontal + Vertical Availability: available immediately Condition: used, operational, well-maintained Features: - Robust industrial-grade construction - Precise reproducibility enabled by CNC control - Specially suitable for complex bending geometries - User-friendly control with program storage - Ideal for steel construction, metal fabrication, railing production, or contract manufacturing Including various accessories (measuring gauge, various bending rolls and spacer rings, and workshop trolley) The machine is in like-new condition. It was purchased for a project that was ultimately not realized. If interested, feel free to get in touch. Inspection possible at short notice by arrangement. Tjdsw D Ruyopfx Ahuef

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Todpfx Aeuz If Njhujf Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Year of construction: 2006, condition: used, machine/vehicle number: BSxx, Demag roller trolley chassis crane trolley trolley EU RU 11 Payload 1350KG Tedpfxjrfwncj Ahusf Width adjustable: 10-22cm - 50 pieces 95 euros 22-30cm - 6 pieces 115 euros Used Item location is 75053 Gondelsheim Shipping possible via DHL package, large quantities via shipping company See pictures

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine Tjdpei Eg Nkofx Ahuef -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, Klingelnberg ZW 301 Gear Measuring Machine with Evaluation Computer Double-flank gear measuring machine with 4-position indexing table - Spur gear - Internal gear - Gear shaft - Computer (evaluation via industrial PC with fully automatic parameter calculation, quality determination, and classification) Todpfx Ahov Ic R Aeujf Workpiece data: Table load including fixture, max. 100 kg Load on support plate/vertical slide including fixture, max. 80 kg Workpiece knife with counterholder on measuring and feed slide, max. 300 mm Workpiece knife with counterholder on machine bed, max. 300 mm Device data: Heidenhain LIF 101 position measuring system Center distance min./max. 45/300 mm Table diameter 150 mm Table height above floor 950 mm Measuring pressure min./max. 5/30 daN Total connected load of the test device: 0.75 kVA Total space requirement: LxWxH 1900 x 1200 x 2200 mm Net weight: 750 kg PC, as well as some master wheels with common modules. Weight: 750 kg

Condition: good (used), Maximum pressure 25tn Tedpfogqumpox Ahuef • 69 and 85mm axles • Machine in very good condition, completely revised

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 109 956, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, TECHNICAL DETAILS Workpiece Rack Length: max. 610 mm Workpiece Diameter: 38 mm Module Range: 0.3 – 1.3 Max. Slide Stroke: 1130 mm Max. Rolling Bar Length: 915 mm Tsdpfjwx H R Tox Ahuof Max. Profile Outer Diameter (Standard): 50 mm Max. Profile Width (Standard): 125 mm Gear Cutting (Rollability): 0.3–1.25 Machine Cycle Times Tailstock forward (approx. 300 mm stroke): 1.0 s Rolling bars forward: 4.2 s Tailstock return (approx. 300 mm stroke): 1.5 s Rolling bars return: 4.8 s Loading/Unloading (manual): 5 s MACHINE DETAILS Weight & Dimensions Total Weight (without automation): 12,200 kg Overall Width: 5,014 mm Machine Width: 3,104 mm Depth without cantilever: 2,564 mm Depth with cantilever: 4,166 mm Hydraulic System Hydraulic Tank: 1,000 l Hydraulic Operating Pressure: 80 bar Electrical Equipment Operating Voltage: 400 V / 3 phases Frequency: 50 ±1 Hz Coolant System Tank Capacity: 260 l Pump Pressure: 3 bar Pump Flow Rate: 24 l/min Cooling Water Supply for Hydraulic Tank (Quantity): 10 l/min Cooling Water Connection for Hydraulic Tank (Temperature): 20 °C EQUIPMENT Full enclosure included Tailstock included Hydraulic system included Oil system included

Condition: used, Writing desk, mobile desk, shelf trolley, logistics trolley, shelf trolley Transport trolleys, platform trolleys, workshop trolleys FETRA type 5834 Writing surface height: 1100 / 1190 mm Writing surface: 605 x 585 mm Shelves: 600 x 495 Load capacity per shelf: 50 kg Total load capacity: 100 kg - Rolling desk made of tubular steel and sectional steel - Screw construction, powder-coated, blue RAL 5007 - Writing surface on wooden board with stop bar, inclined approx. 10 - 2 shelves, can be screwed in variably (2 file heights possible) - 4 swivel castors (Ø 125 mm) with plastic rim and rubber coating on the running surface - 2 fixed castors with brakes Space requirement L x W x H: 600 x 600 x 1190 mm Weight: 25 kg Very good, as new condition Tsdpfx Ajpflp Ejhuef 8 pieces available, price per piece

Condition: new, functionality: fully functional, Year of construction: 2025, Size Thread Height Number of Sets Manufacturer TR4 M8x1.25 H63 Duplex 2x RSK TR1 M5 H38 Duplex 2x HP TR2 M5x0.8 H54 Duplex 1x HP TR2 M5x0.8 H52 Duplex 1x Profiroll TR3 M6x1 H58 Duplex 2x RSK TR2 M6x1 H48 Duplex 1x Hilgeland TR2 M6x1 H14 Duplex 1x HP TR4 M8x1.25 H30 Single 3x RSK Schabenut TR2 5x25 Single 1x RSK Coarse thread TR2 M6 H30 Single 1x RSK Schabenut TR3 M8x1.25 H58 Duplex 1x RSK TR3 M10x1.50 H58 Duplex 2x HP TR4 M10x1.50 H25 Duplex 1x RSK TR3 M8x1.25 H65 Duplex 1x HP TR2 M48x1.25 H48 Duplex 2x RSK For sale as a complete package or individually at the lowest price. Tsdpfx Ahsw If Uuousf

Condition: used, Thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, thread rolling head, rolling head -Manufacturer:BWF, thread rolling head Tsdpfsu Tyvhox Ahuof -Type: RK 12-20 -Thread rollers: M24 x 1.5 -Dimensions: Ø 120 x 180 mm -Weight: 5.6 kg

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC Thread, Gear, and Profile Rolling Machine Model ROLLEX 1 Substructure: The substructure of the thread and profile rolling machine consists of welded steel profiles, partially covered with sheet metal. The space for the process lubricant reservoir is located in the front area of the substructure. Main drive: The main drive generates the rotary motion of the rolling tools required for gear rolling. The drive motor is flanged to the base plate of the rolling spindle bearing via the Cyclo Drive gearbox. The rotary motion is transmitted to the rolling spindle via the Schmidt coupling. The machine operates in a speed range of 0 to 30 rpm, with this range further subdivided into 0 to 20 rpm for continuous operation (S1) and 20 to 30 rpm for intermittent operation (S4). The speed is continuously adjustable using a frequency converter. Brand PROFIROLL Type ROLLEX 1 Year of manufacture 2003 Control, Brand, Type Siemens, Sinumerik, 840D Motor power (kW): 18 kW Electrical connection: 400 V Rolling range: Max. rollable workpiece diameter: 40 mm Rolling carriage stroke: 2 x 80 mm Min. / max. center distance of rolling spindles: 160 / 320 mm Rolling spindle height above the machine bed: 160 mm Max. tool diameter: 250 mm Rolling spindle mounting diameter: 120 mm Rolling spindle mounting length: 80 mm Power & Drive Max. rolling force: 100 kN Rolling spindle speed, continuously variable 0-30 rpm Motors Rolling spindle drive: 2 x 13 Nm Hydraulics 50 Hz: 5.5 kW Process lubrication 50 Hz: 0.1 kW Central lubrication 50 Hz: 0.06 kW Temperature range: +5–+40 °C Todpfx Ahsv Uxq Ssuef Current type/frequency: 3 N/50 Hz Nominal voltage: 400 V Control voltage: 24 V Auxiliary voltage: 24 V/230 V Connected load: 18 kW Nominal current of the machine: 39 A

Condition: used, functionality: limited functionality, Year of construction: 2025, SHEET METAL ROLLING MACHINE W01-1.5X1300 Technical parameters Todpfsxqff Rox Ahuef Roller diameter 75 mm Roller length 1300 mm Max. sheet thickness 1.5 mm Dimensions 1750x350x1100 mm WARNING !!! LAST ITEM, NEW, PACKAGING IN POOR CONDITION.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 109987 - 2800015, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, stroke length: 1,950 mm, Suitable for chipless cold forming of profiles such as splines (straight or helical), spiral gears, oil grooves, CV joints, threads and knurls TECHNICAL DETAILS Workpiece diameter: 38 mm Workpiece length: 500 mm Rack length – max.: 610 mm Max. slide stroke: 1,950 mm Max. rolling bar length: 1,400 + 330 mm Max. profile external diameter (standard): 60 mm Max. profile width (standard): 175 mm Rollable profiles for involute gears (module range): 0.3–2.0 MACHINE DETAILS Machine weight: 10 t Tjdpfx Aswm Hqvehuef Total power requirement: 52 kW Current type: 3 Ph Frequency: 50 Hz Operating voltage: 400 V Rated current: 99 A Overall width: 5,014 mm Machine width: 4,560 mm Depth without boom: 2,541 mm Depth with boom: 4,165 mm Height: 2,100 mm Total weight (without automation): 14,500 kg Drive power: 45 kW Hydraulic tank capacity: 1,000 l EQUIPMENT - Machine in horizontal design - Complete enclosure - Tailstock - Hydraulic system - Oil system

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 109853 - 280028, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, TECHNICAL DETAILS EX-CELL-O Cold Rolling Machine with Felsomat (1999) Design: Horizontal Area of application: Chipless cold forming of profiles such as splines (straight or helical), spiral gears, oil grooves, CV joints, threads, and knurls Workpiece data Workpiece diameter: 38 mm Workpiece length: 500 mm Profile width: 92 mm Profile outer diameter (standard): 50 mm Profile width (standard): 125 mm Rollable profiles for involute gears: 0.3 - 1.25 m Rolling bar length: 610 mm Todpfxowmb Trj Ahujf Travel movements Slide stroke: 760 mm Cycle times Tailstock forward (at approx. 300 mm stroke): 1.0 s Rolling bars forward: 3.0 s Tailstock retraction (at approx. 300 mm) Stroke): 1.5 s Rolling bars return: 3.5 s Loading/unloading (manual): 5.0 s Cycle time: 14.0 s Gear cuts/hour at 100% Ne: 260 MACHINE DETAILS Overall width: 5,014 mm Machine width: 2,360 mm Depth without boom: 2,541 mm Depth with boom: 4,165 mm Height: 2,100 mm Machine weight: 10 t Electrical design – Voltage/Frequency: 380/50 V/Hz Total power requirement: 24 kW Drive power: 22 kW EQUIPMENT - Complete enclosure - Tailstock - Hydraulic system - Oil system

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, workpiece diameter (max.): 160 mm, rotational speed (max.): 300 rpm, workpiece length (max.): 25 mm, TECHNICAL DETAILS Description: Hydraulic internal rolling machine for tapered or cylindrical back rolling of profiles on sliding sleeves, sliding gears, or similar parts. Workpiece Data Workpiece diameter: 160 mm Workpiece length: 25 mm Workpiece internal gearing, adjusted approx.: 85 mm Workpiece external: 75 - 140 mm Workpiece width approx.: 16 - 36 mm Workpiece external pressure ring, adjusted: 160 mm Travel and setting data Maximum travel of the rolling carriage: 60 mm Center distance between workpiece and rolling wheel: 22 mm Rolling wheel speeds, continuously adjustable: 30 - 300 rpm Rolling pressure, continuously adjustable (at 100 bar): 6.1 t Control system: SIEMENS PLC Monitoring control: LAUER PCS 900 / BRANKAMP C 90 with screen display MACHINE DETAILS Machine weight approx.: 4,500 kg Space required approx.: 2.5 x 2.5 x 2.1 m Spindle drive approx.: 6 kW Total drive: 14 kW Total power requirement: 14 kW Operating voltage: 400 V Frequency: 50 Hz Todpfowmb Rkex Ahuof EQUIPMENT - Workpiece carousel loading device for 18 workpieces with workpiece inspection station - Workpiece transport device - Changeover time to a different workpiece size: 30 min / Machining time per workpiece approx.: 25 s - Workpiece storage for intermediate storage - Separate hydraulic system - Separate control cabinet - Coolant system Note: Working areas are approximate and depend on the workpiece and tool conditions.