Used Riveter for sale (92)

Condition: used, machine/vehicle number: 003, Number of heating chambers: 5 Chamber size: 140 Ø x 150 mm high Maximum tested temperature: 1000°C Nsdpfsbn I Tzsx Aiyjcu Electrical connection: 400 V, 13 kW Space requirement: 550 x 1600 x 1830 mm Weight: 492 kg

Condition: used, Year of construction: 2012, pressure 6 bar voltage 24 V weight of the machine ca. 1,75 t length in total 1500 mm length in width 900 mm Total height 2100 mm Ncodsx Tu R Repfx Aiyou Riveting machine, automatic riveter by Arnold Shinjo Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: M20I/9028, Offer Number: M20I/9028 Machinetype: rivet header Make: Carlo Salvi Nsdpfswzkydex Aiyscu Type: RF/GL Constr. year: 1972 diameter range: 5-8 mm shaft length under head: 60 mm max. cut-off length: 90 mm output pieces/min: 200 Location: Germany

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M20I/8324, Offer Number: M20I/8324 Machinetype: rivet header Make: Carlo Salvi Type: RF/635/SV Constr. year: 1985 diameter range: 2-6,35 mm shaft length under head: 70(65) mm cutting length: 87 mm Ncodpfx Aiowi Udcsysu output pieces/min: 360(320) Location: Germany

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: M20I/9016, Offer Number: M20I/9016 Machinetype: rivet header Ncedpfx Aiswzknbsyju Make: Carlo Salvi Type: RF/550/SV Constr. year: 1992 diameter range: 2-5,5 mm shaft length under head: 45 mm max. outside dia. Alu: 6 mm output pieces/min: 450 cutting length: 64 mm Location: Germany

Condition: used, Year of construction: 1974, functionality: fully functional, machine/vehicle number: M20L/6436, Offer Number: M20L/6436 Machinetype: rivet header Make: Carlo Salvi Type: RF/SV Constr. year: 1974 Ncedpfoxlr E Tsx Aiyeu diameter range: 0,8-3,0 mm cutting length: 30 mm shaft length under head: 25 mm output - pieces/min: 600 Location: In our warehouse

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M20L/9019, Offer Number: M20L/9019 Machinetype: rivet header Make: Carlo Salvi Type: RF/635/SV Constr. year: 1985 diameter range: 3-6,35 mm shaft length under head: 65 mm cutting length: 87 mm output pieces/min: 360 Location: In our warehouse Nedpfjx Edtcox Aiyocu

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: M20L/8619, Offer Number: M20L/8619 Machinetype: rivet header Info: semi tubular rivets Make: NATIONAL Type: 51 Constr. year: 1980 diameter range: 5 mm shaft length under head: 40 mm max. cut-off length: 60 mm output pieces/min: 470 Location: In our warehouse Ncodpfowi Sbrjx Aiyeu

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: M20I/9019, Offer Number: M20I/9019 Machinetype: rivet header Make: Carlo Salvi Type: RF/635/SV Constr. year: 1985 diameter range: 3-6,35 mm shaft length under head: 65 mm Ncodpfxjwzknue Aiyou cutting length: 87 mm output pieces/min: 360 Location: Germany

Condition: good (used), Sicom B163-5 Double-Head Binder Riveter Manufacturer: Sicom, Italy Very good condition, ready for production. Double head riveting machine to fit two rivets simultaneously on ring-binders, sample books and similar products. Cardboard thickness: 0.5-4 mm Maximum board size: 1000 x 900 mm Ncedpfoy Hgkvsx Aiyju Weight: 170 kg Pneumatic supply: 6-8 bar Automatic rivet feeding, material piercing, and mechanism crimping.

Condition: used, Oscillating head riveting machine BODMER KÜSNACHT Type FMK 3 Year of manufacture approx. 1980 Ncedjglarlopfx Aiyou Riveting shank diameter: max. 10 mm Tool diameter: 12 mm Riveting head stroke: 40 mm Riveting spindle speed: approx. 1400 rpm Motor power: 0.37 kW Power connection: 380 volts, 50 Hz - Riveting pressure adjustment via hydraulic pressure, stepless - Micrometer stop for stroke limitation - Stroke movement via oil hydraulics (max. 45 bar) - Machined flange surface Ø 115 mm with mounting nut on the housing Overall length: approx. 800 mm Weight: approx. 40 kg Good condition The riveting head has a multi-spindle head for setting 2 or 3 rivets simultaneously. However, this can be removed and used as a normal head. For normal use, however, the standard oscillating head, which holds the tool, is missing.

Condition: used, Cordless riveting tool, blind rivet gun, blind rivets Ncodpfx Aijdz Ul Ioyju -Transfer in current condition as seen -The device works, the batteries are defective -without: batteries -Dimensions: 345/90/H250 mm -Weight: 5.3 kg

Condition: new, Year of construction: 2025, Pneumatic radial riveting machine RMU-12-C is designed for forming caps in solid steel rivets d=2...12 mm and in tubular steel rivets d=4x1...14x1 mm. Technical data: 1. Diameter of solid steel rivets - 2...12 mm. 2. Diameter of tubular steel rivets - 4...14 mm. 3. Motion of riveting head - 20 mm. 4. Time of unriveting for one rivet - 1...10 sec. 5. Motor power - 0,75 kW. 6. Voltage - 220/380 V 50 Hz. 7. Working pressure - 3...6 Bar. 8. Weight - 100...120 kg. This riveting machine can be used for movable and immovable riveted connections. The cost of the riveting machine does not include the cost of punches and shipping costs. Nedpfxofvztue Aiyocu

Condition: used, machine/vehicle number: 7006, Nietmaschine - Riveter Stocko WP 100 b Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Ncodpfx Aisrgb Amjyou On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Nietmaschine / Riveting machine Hang 162-01 Nodpev D H Htsfx Aiyscu Baujahr / Year 1993  - SN. 39709 Arbeitstiefe (Ausladung) / Working depth (projection) 620mm Taktzeit / Cycle time 0,7sec Niethub / Rivet stroke 55mm Arbeitshöhe / Working height 1100mm Nietschaftsdurchmesser / Rivet Diameter 2-4mm Antriebsleistung / Drive capacity 0,37 kW Geeignet für Verarbeitung von Halbhohlniete, Vollniete, Hohlniete, Rohrniete, Zweispitzniete, Doppelhohlniete (Zuführung des Nietkäppchens), Nietmaschine für mittlere bis große Serien Suitable for processing semi-tubular rivets, solid rivets, hollow rivets, tubular rivets, two-point rivets, double-tubular rivets (feed of the rivet cap), riveting machine for medium to large series Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), machine/vehicle number: P90-6924, functionality: fully functional, OSCILLATING RIVETING MACHINE, BENCH MODEL TYPE DNX 05 Condition: very good, fully operational Price: €5,000.00 ex works Ncodpfx Ajxlg Atsiyou

Condition: new, Year of construction: 2025, operating hours: 1 h, machine/vehicle number: 6151710200, Demo tool with only 2 operating hours: Chicago Pneumatic CP4210AS push riveting machine with short alligator head Take advantage of the CP push riveting tool for the most common riveting and repair applications for metal structures in the aerospace industry. Experience the benefits of the CP push riveting tool for the most common riveting and repair applications for metal structures in the aerospace industry. Year of manufacture: 2025 Technical specifications: Max. compression force (90 psi/6.2 bar): 13.3 kN Max. piston stroke: 15.9 mm Height: 92 mm Length: 233 mm Weight: 1.7 kg Jaw type: Alligator short Main material: Aluminum Max. rivet size aluminum (in): 1/8 Max. rivet size aluminum (mm): 3.2 Max. rivet size steel (in): 3/32 Max. rivet size steel (mm): 2.4 Starting system: Safety lever Air inlet thread size (in): 1/4 Air inlet thread size: NPT Max. working air pressure: 6.3 bar Min. hose diameter (5 m hose length): 0.38 in Min. hose diameter (5 m hose length): 9.5 mm Ncjdpfxoxwu Rcj Aiyou Visit our store; we always have a wide selection of Pneumatic tools for industry and trade in stock.

Condition: good (used), Manufacturer: Dunkes Type: DN 2 Thrust: 2t Diameter: max: 12mm Table dimensions: 210 x 200 mm Motor power: 0.55 kW Machine weight approx.: 130 kg The dimensions of the machine are approx. Nsdsvxrzlopfx Aiyocu 0.40 x 0.50 x 1.00 m

Condition: used, Year of construction: 1988, Type: Riveting machine Manufacturer: ARNO Maskiner AB, Sweden Model: 1304 Year: 1988 Condition: fully working Nedpfexgpftex Aiyocu

Condition: new, Year of construction: 2026, Maximum configuration for the professional user. Combination machine with TERSA cutterblock, miter cutting device and pivoting milling spindle Ø 350 mm main saw blade with a maximum cutting height of 118 mm, which is also achieved when the scoring saw blade is installed Scoring device with separate motor and Ø 120 mm saw blade, easily and conveniently adjustable from the outside Highly precise format sliding table made of anodized aluminum on hardened and riveted steel guide rails Large outfeed table (1200 x 650 mm) with roller and extendable aluminum telescope fence up to a maximum of 3300 mm Saw unit can be pivoted from 90° to -45° Pivoting milling spindle from 90° to -45° to the rear into the milling fence Four milling speeds Right/left rotation of the milling spindle Quick changeover to the thickness planer thanks to parallel-opening planer tables 2-stage feed rate on the thickness table Helical toothed steel feed roller for even wood feed Three independent industrial motors Ncedpfxscnxa Ss Aiyou With separate saw parallel fence and separate joiner fence With lockable main switch Equipment details: Format fence Immediate control Outfeed table Outfeed table with angle-adjustable telescope stop with degree scale Sliding table with ball contact system made of anodized aluminum Guides made of hardened and ground steel F550S, 15% harder than conventional steel Guides riveted and not glued easy running, quiet and reliable 10-year HOLZKRAFT warranty on wear of the hardened guide rails Cast iron double-pivot saw unit Height adjustment via dovetail guide extremely robust and torsionally stiff for precise cuts located close to the saw blade, bearing on both sides height- and up to 45° angle adjustable standard scoring unit with separate scoring motor 0.55 kW Double-pivot milling unit large, pivoting double-pivot milling unit made of cast iron Milling fence heavy-duty professional design the high-quality milling fence made of cast iron comes standard with fine adjustment 3-way positionable for quick restoration of the setting with fine adjustment via rack and pinion, digital display and aluminum milling fence cheeks Planing units helical toothed steel feed rollers for a constant and even wood feed massive anti-kickback devices prevent workpieces from kicking back 4-knife Tersa cutterblock ensures an optimal planing result table lips for quieter operation Tersa planing cutterblock No more adjustment and screwing Planer knife change in seconds Self-locking particularly quiet Thickness table The thickness table is mounted on four large-dimensioned spindles, which ensure maximum stability under all working conditions Due to the special lifting device, the table position is maintained without fault, even without locking Parallel fence with fine adjustment and quick clamping stable round bar guide made of ground steel interchangeable aluminum ruler No gap, guide rods are overlapping Separate joiner fence large, professional design (1800 x 150 mm) 0-45° pivotable with quick adjustment stable round bar guide made of ground steel Simultaneous opening Type: No. 5500557

Condition: used, maximum load weight: 36,040 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2025, next inspection (TÜV): 05/2027, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Ncjdezc A Afopfx Aiyeu Excerpt from the equipment. Complete equipment available upon request. Chassis * Regular ladder frame in lightweight steel with continuous crossmembers * With an extension of the chassis frame, the coupling plate is approximately 8 mm thick * with a 2-inch kingpin according to DIN 74080 / ISO 337 Suspension * Axle lift mechanism on axle 1 * Three-axle unit SAF INTRADISC * with disc brakes Ø 430 mm * ET 120 air suspension with approximately 180 mm travel Tires * Wheels with internal sensors according to UN ECE R141 * 6x 385/65 R 22.5 UNIROYAL TH 50 * 6 steel rims 22.5 x 11.75 * Offset approximately 120 mm (ET 120) Chassis components * Mechanical fifth wheel with leveling foot, approximately 24 t lifting capacity, single-sided operation on the right-hand side while driving * Storage box for: 10 side panels, folding stakes, and rear gate, fully enclosed, protected against spray water, also serves as a side protection device * 2 plastic toolboxes, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm, installed at the rear, 1x on the left and 1x on the right Brake / Air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection lines) * Parking brake as a spring brake, external pneumatic connections as well as an external EBS diagnostic connection via ISO 7638 plug connection * WABCO EBS system * Air suspension system including 1 lifting and lowering valve, mounted on the left-hand side behind the axle unit while driving, driving position is set automatically * 2 non-interchangeable coupling heads at the front ISO 1728 * Air tanks for the brake system and air reservoir made of steel (EN 286-2) Floor * Flat floor approximately 30 mm thick, multiply laminated plywood * Floor sealed around the perimeter * Stake pockets for square tube inserts approximately 80 x 80 mm * Storage for a maximum of 14 square tube inserts approximately 80 x 80 (length 1,990 mm) on the front wall inside Front wall * Front wall approximately 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame * 2 pairs of lashing points (permissible lashing force approximately 1,000 kg per ring) on the front wall according to EN 12640, Note: If the front wall is used for securing the load, suitable lashing straps must be used to tighten the load, if the vehicle is operated without side panels and a rear gate Rear wall * Folding rear wall approximately 600 mm made of aluminum hollow profiles with 3 tension bars and T-handle locks * 2 folding steps on the inside, folding steel corner posts at the rear in the height of the side panels Side wall * 4 pairs of folding stakes in the height of the side panels * VarioFix steel hole outer frame * 4 pairs of stake holders for folding stakes on the outer frame (evenly distributed) * 24 pairs of lashing eyes in the outer frame (according to EN 12640), permissible tensile force approximately 5,000 kg per ring Side panels * 5 pairs of folding side panels approximately 600 mm made of aluminum hollow profiles with tension bars Electrical / Electronics * Lamp carrier made of steel, arranged above the underrun protection * KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED outline lights and reflectors at the front, flashing LED side marker lights, Superseal and bayon

Year of construction: 1999, condition: good (used), functionality: fully functional, Manufacturer: Vester Elektronik GmbH Model: Sensorchek VSC 10C Year of manufacture: 1999 Machine type: Optical measuring and sorting machine Application: 100% inspection of turned parts, stamped parts, rivets, screws, small components Technology: Optoelectronic image processing with CCD/CMOS cameras Technical Data Measuring System • 1–4 industrial cameras (CCD/CMOS) • Telecentric precision lenses • Transmitted and incident light illumination (LED flash) • Subpixel evaluation • Measuring accuracy: in the hundredth range (approx. 0.01 mm) Testable Parts • Diameter: up to approx. 30 mm Nedsyizrljpfx Aiyocu • Length: up to approx. 80 mm • Material: Metal parts, turned parts, stamped parts, pressed parts Performance • Cycle rate: 100–250 parts/min • Feeding: Vibratory bowl feeder + separation • Sorting: Pneumatic good/reject ejection

Year of construction: 2017, condition: ready for operation (used), A combined hot riveting and forming system for plastic components is available. Power: 38kW, Control: PLC, Weight: approx. 1850kg. Documentation available. An on-site inspection is possible. Ncodszfp H Iopfx Aiyju

Condition: used, TECHNICAL DETAILS - Parts per minute : 400 - Rivet length : 12 [mm] - Drilling depth (max.) : 5 [mm] - Cutting diameter : 3 [mm] - Floor space (width) : 1.12 [m] Nedjuhb Tkepfx Aiyjcu - Floor space (length) : 2.21 [m] - Height : 1.77 [m] - Motor : 4 [hp/kW] - Net weight : 2,500 [kg] - Gross weight : 3,000 [kg] EQUIPMENT - Tooling as per photo

Condition: used, We are offering this used GESIPA FireFox 2 F axial pneumatic-hydraulic riveting tool, year of manufacture unknown, for sale. Ncodszfg Suopfx Aiyju Manufacturer: Gesipa Blindniettechnik GmbH & Co. KG Type: FireFox 2 F axial Maximum operating pressure: 6.0 bar Serial number: If you have any questions or require further information, please do not hesitate to contact us.