Used Ripper for sale (831)

Condition: excellent (used), Year of construction: 2011, Ficep 1003 DZB CNC Drilling / Sawing Line – Year 2011. Hfjdpfx Aexmvnueh Hep 3 Spindles. Automatic Tool Changer. Scribing. Short Piece Removal. Hard Stamping. Gripper feed. Infeed and Outfeed Cross Transfers. 1000mm Section Capacity.

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Hfsdpfx Aob A Hbcjh Hsp -Sheet metal claws -Span width: 0 to 50 mm -Load capacity: 6000 kg -Number: 1x terminals available -Price: per piece -Weight: 28 kg/piece

Year of construction: 2025, operating hours: 10 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol • air ionization Hfsdpfx Asxt Dmxoh Hop • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Optionally a vacuum cleaner unit can be offered later.

Condition: new, Year of construction: 2024, GG1700 3 cilinder kubota . Professional new excavator model: GG1700 from the international brand Günter Grossmann. Every Günter Grossmann machine comes with a company warranty. The GG1700 model is a great piece of equipment for the most demanding construction, electrical and plumbing companies. We guarantee service after the equipment warranty. Excavators are manufactured on the basis of advanced technology. We have all parts for our brand machines in stock in Europe Price EUR 16600 (excl. VAT) (Including: Excavator GG1700 + bucket 400 mm) Hfedpfx Ahshlv N Ie Hop SPECIFICATIONS Model: GG1700 Brand: Günter Grossmann Weight: 1700kg Joystick: Yes Extendable Tracks: Yes Movable swivel arm: Yes Engine brand: KUBOTA D902 Power: 25 HP Pump: TF PSA12NOO Distributor: TF TKM15BX-08LP 01 Rotary Motor: Eaton VS Drive Motor: Eaton USA Driving speed: 0-8.5 km/h MEASUREMENTS Total length:: 3585 mm Total width: 1300 mm Total height: 2362 mm Minimum ground clearance: 1605 mm WORKING RANGE max. digging depth: 2300 mm Maximum digging radius: 4050 mm Maximum dump height: 2550 mm ACCESSORIES Bucket 300mm: 260 Eur ex Bucket 400mm: 300 Eur ex Bucket 600mm: 330 Eur ex Bucket 1000mm: 400 Eur ex Log grab: 600 Eur ex Ripper: 320 Eur ex Rake: 320 Eur ex Drill: 1800 Eur ex Quick coupler: 450 Eur ex Demolition Hammer: 1800 Eur ex

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 230 V, warranty duration: 24 months, DGUV certified until: 12/2027, cutting width (max.): 30 mm, type of input current: AC, control voltage: 24 V, nominal power: 1 kW (1.36 HP), input frequency: 50 Hz, space requirement height: 1,080 mm, space requirement length: 750 mm, space requirement width: 790 mm, JAC Bread Slicer Model: Varia Pro - Easy operation - 200 slices/min - Cutting width/bread length: 380 mm - Robust circular blade machine - Simple manual operation - Adjustable slice thickness from 4 to 30 mm - Dimensions: 790 x 746 x 1080 mm (W x D x H) - Maximum bread size: 380 x 340 x 160 mm (L x D x H) - Exclusively DGUV V3 tested by us - Connection: 230V, 1 kW - New machine, SAB certified - Includes warranty and spare parts service Hedpfxsuirzhs Ah Hsfp Options: - Delivery service - Stainless steel version - Spare blade - Automatic bread gripper - Bag holder - Custom colours - Front bread tray - Maintenance contract - Service package - Training & commissioning - Leasing & rental service Many more top bread slicers in stock!

Condition: new, Year of construction: 2023, operating hours: 20 h, functionality: fully functional, overall weight: 50 kg, load capacity: 10 kg, arm reach: 1,400 mm, pivoting range: 225 °, input voltage: 230 V, repeat accuracy: 0.1 mm, carrying capacity per cantilever arm: 10 kg, operating speed: 1,000 mm/s, working height: 1,950 mm, number of axes: 7, Equipment: documentation/manual, 🦾 Mobile Cobot Palletizer Kassow Robots KR1410 MRK with Schmalz Vacuum Gripper & Carton Gripper – only 20 hours of operation! 🚚 Delivery available Like-new mobile cobot palletizer Kassow Robots KR1410 MRK with Schmalz ROB-SET FXCB UR O20 vacuum gripper and additional suction gripper for cartons. The robot was operated for only 20 hours for testing purposes and is in perfect technical and visual condition. Ideal for automated palletizing or packaging processes, logistics centers, or production lines. A video of the system was recorded one week before decommissioning. ⚙️ Technical Data (KR1410 MRK) Reach: 1,400 mm Working height: 1,950 mm Payload: up to 10 kg Repeatability: ± 0.1 mm Weight: approx. 35 kg Working range: up to 1,950 mm above the work surface Axes: 7 (high flexibility, compact design) Protection class: IP54 Collaborative Robot (MRK-capable, human-robot collaboration possible) 🧰 Equipment & Special Features 💨 Schmalz ROB-SET FXCB UR O20 Vacuum Gripper - Area gripper for smooth or cartonized surfaces - Fully ready to connect 📦 Additional carton suction gripper for variable packaging sizes 🦾 Mobile cobot unit – easy repositioning using a pallet jack 🧱 Palletizing capability for 2 pallets simultaneously (double palletizing possible) ⚙️ Customization / Integration by partner company from Hanover available 🕓 Only 20 operating hours – virtually as new Hjdpfxjxwa Utj Ah Hofp 🚚 Delivery & Service - Nationwide delivery possible - Commissioning and customization support via integrator from Hanover - Immediately available – no lead time 💬 Highlights - Very low hours (only 20h) - Well maintained and fully functional - Flexible, compact and efficient – ideal for collaborative robotics applications, logistics, packaging, shipping, palletizing

Condition: excellent (used), Year of construction: 2018, 2018 KALTENBACH KDP1036 CNC DRILLING / MILLING / SCRIBING LINE – KBS 1051 SAWING LINE. INFEED CROSS TRANSFERS T13 20.5 METRES INFEED CAPACITY. GRIPPER FED MATERIAL MEASUREMENT KDP1036 3 AXIS. AUTOMATIC TOOL CHANGER. 500MM SUB AXIS FOR MILLING, DRILLING, MARKING & TAPPING. INTEGRATED CHIP CONVEYOR KBS 1051 SAW Hodoxmvm Rspfx Ah Hjfp HORIZONTAL AND VERTICAL CLAMPING AUTOMATIC FEED CONTROL Automatic adjustment of saw band angle LS 270 MEASURING HEAD OUTFEED 19.750mm OUTFEED CROSS TRANSFERS T13

Year of construction: 2004, condition: used, controller manufacturer: SIEMENS, pipe diameter (max.): 90 mm, wall thickness: 8 mm, CONTROLS .. SIEMENS FEEDSTOCK TUBE .. external diameter min.: 10 mm .. external diameter max.: 90 mm .. wall thickness min.: 0.8 mm .. wall thickness max.: 8 mm .. length min.: 150 mm .. lenght max.: 3000 mm Integrated Tube Cutting Line – Standard Configuration The integrated tube cutting line is a fully automated system for the precise processing of tubes and profiles. It combines cutting, brushing/deburring, washing, drying, measuring, and stacking into one continuous process. All workpieces are 100% inspected within the line for length, inner and outer diameter, and defective parts are automatically sorted out. System Components BM Bundle loading magazine with tube separation unit Sawing unit BDM Brushing and deburring machine WDM Washing machine with dryer PI Length measurement control Outer and inner diameter inspection (Keyence sensors, measuring mandrels up to 500 mm) SRT Stacking handling with magnetic gripper Safety devices (protective fence, light barriers, etc.) The bundle loading magazine is designed for tube lengths up to 9 m. The system allows for damage-free separation and positioning of the tubes. After cutting, the tubes are deburred, cleaned, dried, and automatically stacked for further transport. Main Technical Data Specification Value Overall length approx. 13,000 mm Width approx. 3,600 mm Height approx. 2,350 mm Floor load approx. 1,500 kg/m² Operating temperature 15 °C – 40 °C Relative humidity max. 90 % Connection Requirements Electrical: Control system: Siemens 840 D Installed power: approx. 125 kW Fuse protection: 200 A Power supply: 3 × 95 mm² + 1 × 50 mm² PEN (IEC 364-4-41 / VDE 0100 Part 410) Pneumatic: Compressed air: approx. 3.5 m³/min, 6–10 bar (dry and filtered) Water: ¾" water connection for washing machine with dryer Filling volume: 1,400 l Tube Processing Parameters Parameter Value Max. bundle weight 5,000 kg Outer diameter range 10–90 mm Wall thickness 0.8–8 mm Tube shape Round and profile tubes Raw material length 3,000–9,000 mm Cut lengths 150–3,000 mm Material Steel, stainless steel, Docol 800 DpAg, 26MnB5, 34MnB5 Max. saw blade width 3 mm Measuring and Inspection Systems Length measurement: Keyence sensor with SPC evaluation Inner/outer diameter inspection: Measuring mandrels with force detection (1–100 N) Repeatability: ± 0.1 mm Data analysis: PC-based evaluation software including documentation Performance Data Processing speed depends on tube diameter, length, and material Max. part weight per cut: 25 kg Machining accuracy: ± 0.05 mm + saw blade tolerance (max. ± 0.10 mm total) Max. stacking weight: 45 kg Positioning accuracy for stacking: 0.5 mm Corrosion Protection All machine and safety components are finished with a high-quality base coat. Machine color: RAL 5010 (Forster Blue) Safety guards: RAL 1003 (Signal Yellow) Special Features Fully automated workflow from bundle loading to sorted stacking SPC-controlled measurement and documentation system Hedpoxvn Sdjfx Ah Hefp Carbide-compatible sawing technology High process reliability with integrated inspection and monitoring systems Compact design with excellent machining precision

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, year of last overhaul: 2025, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing - Remote maintenance/support via remote connection Hfedpext Dk Rjfx Ah Hop - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: good (used), power: 405 kW (550.65 HP), fuel type: diesel, color: yellow, Year of construction: 2022, operating hours: 10,618 h, Equipment: air conditioning, Technical information Track width: 65 cm Empty weight: 94.200 kg Make of engine: C18 Functional Bucket capacity: 2,2 m³ Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Identification Serial number: CAT00395JSGD10261 Other information Emission level: Stage II / Tier II Hfedpfexm R Rqjx Ah Hop Delivery terms: EXW Transport dimensions (LxWxH): 12,05x3,34x4,66 Production country: CN Additional information Please contact Antonio Francisco Pinto, Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information Note: Will be sold with a standard bucket hence ripper not included.

Condition: used, Year of construction: 2021, controller manufacturer: Heidenhain, controller model: TNC 640, _____ Description: Year of manuf. : 2021 Control : Heidenhain TNC 640 Speed : 4000 rpm Movement X/Y/Z : 3500/1200/1500 mm In General: Year of manufacture:2021 Control system:TNC 640 Traverse paths X/Y/Z:3,500/1,200/1,500 mm Gear spindle:4,000 rpm, SK 50 Milling head: Technology:Diagonal head with geared spindle Speed:4,000 rpm Power max.:37 kW Torque max.:644 Nm Index:2.5° Work table: Clamping surface:3,700 x 1,000 mm Load capacity max.:9.000 kg Hfedpfsxv Nknox Ah Hep Tool magazin: Technology:Chain magazine Tool changer:Double gripper Number of stations:40 Tool diameter max.:125 (250) mm Tool length max.:400 mm Equipment: Position measuring systems:Directly in all axes Chip disposal:Chip conveyor Coolant supply:IKZ system, 20 bar Touch Probe:Renishaw Set-up mode:Electronic handwheel Software option:Adaptive Control

Condition: good (used), Year of construction: 2003, 5-Axis CNC Machining Center AXA VPC 40 U Year of manufacture: 2003 Control unit: Heidenhain iTNC 530 Travels: X = 2300 mm vertical / 2000 mm horizontal Y = 1200 mm Z = 600 mm Working area: Width: approx. 3000 mm Table height: Zmin = vertical/horizontal 110/160 mm, Zmax = Zmin + Z travel Rotary table height: Zmin = vertical/horizontal 110/160 mm, Zmax = Zmin + Z travel Tool changer: Double gripper for parallel tool preselection during main time Short tool change times, approx. 6 sec. Tool magazine: Chain magazine with 36 tool stations Tool holders SK40 DIN69871A Hfodpexrn Tajfx Ah Hop Drive power: 30 kW / 143 Nm 40% duty cycle (Drive no. 110); AC - hollow shaft motor; Speed range: 30 – 10,000 rpm Working spindle: Single-axis swivel head Swivel movement over B-axis in increments of less than 1°, directly programmable from X 0° to X (-) 90°; Locking via Hirth coupling Coolant through spindle External 1100 l coolant tank with rotary filter, manufacturer: KNOLL, and adjustable high-pressure pump up to 30 bar NC rotary table AXA RTA 5S Rectangular faceplate 1100 x 1100 mm; Incl. hydraulic clamping, corresponding NC axis, and direct measuring system; Additional equipment: CNC control: Heidenhain iTNC 530 with digital drive control; Incl. hard disk storage and 15'' TFT display. Data interface V.24/RS232C for data transfer. Thread cutting without compensation chuck. Increased accuracy for X, Y, and Z axes with vertical spindle. Enhanced repeatability, increased positioning accuracy, including thermal compensation in X and Z axes. Measuring systems: Direct linear (manufacturer: Heidenhain), protected. Hinged belt chip conveyor Extraction unit for double-sided extraction with fully enclosed working area Hand rinsing gun for cleaning with coolant. Electronic handwheel with 2 m spiral cable. Tool measuring system TT 130 (manufacturer: Heidenhain) Flat/slideway system:

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, OPPORTUNITY – IMMEDIATELY AVAILABLE HYDRAULIC HIGH PERFORMANCE BAND SAWING LINE MANUFACTURER: BEHRINGER MODEL: HBM 440 A PC-E YEAR OF MANUFACTURE: 2015 Sawing capacity round: 440 mm Sawing capacity flat (W x H): 440 x 440 mm Minimum round / flat: 30 mm / 20 x 20 mm Saw blade dimension: 6700 x 54 x 1.1 mm Drive power: 11 kW Hfsdpfxexwqm Hj Ah Hjp Cutting speed: 20 – 200 m/min Material feed per stroke: 600 mm Material feed, multiple: max. 5400 mm Machine weight: 8,200 kg Dimensions (L x W x H): 6500 x 5000 x 2700 mm Transport height: 2400 mm Specifications subject to change – errors excepted Equipment: - Coolant system 200 l - Full enclosure of the saw - Material infeed support, 1650 mm length - Chip conveyor - BEHRINGER CNC dialogue computer IP 65, BEHRINGER dialogue control IP 65 - Automatic bar change - Sorting unit in portal design: - Usable stroke of gripper: 4660 mm - Depth of storage: 2000 mm - Max. cut-off length: 4000 mm - Max. single workpiece weight: 1500 kg - Infeed magazine KM 45 F-VR / 600-6,200: - Round material: 50 – 440 mm - Flat material: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Bar length: 600 – 6200 mm - Powered roller conveyor: 6100 mm - Usable material storage: 3000 mm - Safety fence PRIOR SALE AND AVAILABILITY RESERVED

Condition: used, machine/vehicle number: 008021, Max. panel width: 4300 mm Hedjw Uz Spjpfx Ah Hefp Max. panel length: 2200 mm Main saw blade projection: 125 mm No of Grippers: 11 Panel Rotation Station: yes Thin sheet loading: yes Vacuum sheet loading: yes

Condition: good (used), Year of construction: 2014, functionality: fully functional, System consisting of: PANEL SAW SELCO WNT 610 / 4500 x 2200 mm PC-BASED CONTROL SYSTEM Max. cutting length: 4,500 mm Max. saw blade projection (main saw): 95 mm Max. opening of clamping grippers: 90 mm Min. panel dimensions from rear: 1,830 x 915 mm Max. panel dimensions from rear: 3,100 x 2,200 mm Min. panel thickness for rear feeding: 3 mm Worktable height: 985 mm Main saw motor: 15 kW Main saw blade diameter: 380 mm Scoring saw motor: 2.2 kW Scoring saw blade diameter: 200 mm DIGISET: electronic adjustment of scoring saw to main saw QUICK CHANGE: fast blade change at the push of a button Saw carriage drive: 1 - 140 m/min Integrated side aligner in saw carriage: 0 - 4,200 mm Automatic measuring system for manual cuts Pusher extension from 5,500 to 7,800 mm 10 pneumatic clamping grippers on pusher with double fingers 3 front aligners 16 support roller tracks behind the machine table 4 air-cushion tables in front of the machine table, rounded, including movement device for table 2 Automatic ejection of end pieces beyond the cutting line Material support area under the pusher equipped with brush rollers for sensitive surfaces Machine table with air nozzles for sensitive surfaces Hfsdpfxexranpo Ah Hjp Automatic device for monitoring the main saw blade consisting of a sensor that detects blade deflection and a system for measuring main spindle speed Software package: QUICKOPTI for optimizing cutting plans directly on the machine OSI PLUS INTERFACE VERSION OPTIPLANNING OPTIMIZATION SOFTWARE incl. hardware dongle, allows management of up to 10 users via network OS LABELLING: graphical editor on the machine control system with workpiece drawings, real-time label printing directly at the machine possible COMMUNICATION BETWEEN STORAGE FEED SYSTEM AND SELCO Industrial label printer at the machine STORAGE FEED SYSTEM RBO WINSTORE 2D STANDARD TRAVERSE 8000 MM Swiveling suction frame 0 - 180 degrees with controlled axis Panel alignment/squareness correction system consisting of 3 photocells mounted on pneumatic cylinders Panel weight detection via load cell mounted on the suction frame in the separation area, checks whether the specified weight value is within the expected range for this panel type. If not, the panel is set down again and the separation cycle restarts. Roller conveyor for stacking and unstacking: 4,200 mm Software: LINE SUPERVISOR with warehouse mapping, catalog, import of machining data from the optimizer, management of BOMs, plant control

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws Hsdpfx Ahjd Hb Ilj Hjfp -Span width: 0 to 40 mm -Load capacity: 4,500 kg -Weight: 16 kg

Condition: like new (used), Year of construction: 2012, Description of Ficep RAPID HP35T Hodpfx Ahexn T Smo Hofp Ficep RAPID HP 35 T Angle Processing Machine The Ficep HP35T is the predecessor of the current Ficep RAPID series for processing angle steel. The Ficep HP35T is a CNC-controlled system for machining angle profiles. These are robust angle processing centers commonly used in steel fabrication and truss construction. The angle steel is positioned on a transport frame for material feeding. A measuring carriage with a gripper automatically conveys the angle material to the various processing stations of the system, following the machining data entered via the CNC control panel. Once machining is complete, the finished component—drilled, marked, and sawn—is transferred to the outfeed roller conveyor and storage system. Transport System Reinforced roller conveyor for profiles up to 12 meters in length. A powered measuring carriage on the infeed table transports the material at up to 45 m/min. A rotating support system with cross-transfer racks in the loading area allows for the input of pre-staged profiles into the waiting position. In the discharge area, a driven roller conveyor transports the finished profiles/angles up to a length of 12 meters. Cross-transfer equipment with 5 supports is used for unloading. Drilling Units with Tool Changer To process large angle profiles up to 350 mm with a wall thickness of 40 mm, this machine is equipped with 2 powerful drilling units (one per flange) featuring a spindle drive of 19 kW and infinitely adjustable spindle speeds from 180 - 3500 rpm. These drilling capabilities are ideal for the use of modern carbide drill tools. The drilling tools are held in HSK-A80 holders, and each drilling unit has a tool changer with 3 tool positions for rapid tool changes. MKT38N Marking Unit A marking unit with 38 marking tools allows for flange marking on angle profiles. Characters sized 16x8 mm are hydraulically embossed, enabling part identification after galvanization. Precision Circular Saw The powerful circular saw is designed for 90° cuts. A vertical clamping system secures the material during fast sawing. Material dimensions range from 60 x 60 x 6 mm to 350 x 350 x 40 mm. The 18 kW saw motor with a 560 mm circular saw blade delivers very high cutting performance. Sawing speed is 80 - 180 m/min. Technical Specifications Ficep HP35T: Angle dimensions min. 60x60x6 mm to 350x350x40 mm Circular saw blade diameter 560 mm Saw motor 18 kW Cutting speed 80 - 180 m/min Max. drill diameter 40 mm Drill spindle drive: 19 kW Spindle speed 180 - 3500 rpm Feed rate 80 - 300 mm/min

Condition: like new (used), Year of construction: 2006, operating hours: 33,107 h, functionality: fully functional, Top machine from clean room production (pharmacy) - with turntable 820 mm - with GEKU robot SR 500 ST x=600 y=1400 z=2500 mm - only 33,107 operating hours - Protective housing/ protective cage - Horizontal conveyor belt - hardly any paint damage / almost new condition - fully functional The machine can be inspected under power by arrangement Technical data Manufacturer Engel Type V 330H/80V/130 Combi Serial number 162036 Year of manufacture 2006 Operating hours 33107 h Dimensions L/W/H see drawing Weight 10600 kg Functionality full Condition excellent Special Control unit CC 200 Screw ⌀ 25 / 22 mm Hjdpfx Aoub Umqeh Hofp Injection weight 72/ 35 gr. Injection pressure 2391/ 2066 bar Injection volume 79 / 38 ccm Clamping force 1300 kN/ 130 to. Tie bar spacing: tie barless Ejector stroke/force 61 kN/ 100 mm Hydraulic clamping unit Motor power follows Heating power follows Total output follows The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras Turntable (820 mm diameter) Geku Robot SR 500 ST Protective housing / protective cage CC 200 German English language GEKU Robot details SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping Free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing - On request - Hire purchase option Price on request

Condition: good (used), Year of construction: 2012, operating hours: 52,789 h, functionality: fully functional, Travelling Column Milling Machine DMF 360 (Yll00) New DMG Design Travel paths: X = 3,600 mm, Y = 1,100 mm, Z = 900 mm Rapid traverse: 40 m/min, acceleration: 4 m/s² Spindle speed range: 20 to 8,000 rpm Vertical motor spindle with 23.5 / 13.5 kW (25 / 100% duty cycle) Tool holder: SK40 according to DIN 69871 Tool clamping according to DIN 69872 Magazine for 30 tools (chain-type with double gripper) Chip-to-chip time: 9 s (SK40) Fixed table: 4,200 x 1,100 mm Full enclosure, coolant tank Direct measuring systems Dynamic package for DMF 360 linear (Yll00): Linear drive X-axis with 80 m/min Rapid traverse XYZ: 80 / 60 / 60 m/min, acceleration XYZ: 5 / 6 / 6 m/s² Active cooling for main spindle and linear motor Chip-to-chip time: 7.5 s (SK40) Fixed table with integrated rotary table, Ø 1,050 mm, left-side arrangement Max. load capacity: 1,200 kg Hydraulic clamping Swivel head, B-axis, 20 – 10,000 rpm, HSK-A100 for tool holder according to DIN 69893 with power 32 / 22 kW (40/100% duty cycle) with torque 298/205 Nm (40/100% duty cycle) Infrared probe Make: Heidenhain TS 649 DMG Laser tool measurement: Blum (not compatible with TT140; for pendulum machining, please order 2 units as needed) Calibration arbor with tool holder Production package includes: - Chip conveyor - Internal coolant supply 40 bar / 980 l - 2 rotating viewing windows - Purge air for linear measuring systems - Rinsing gun - Rotary union for spindle Packaging floor/foil Tool magazine with 60 / 120 positions SK50 / HSK-A100 The complete list of features is available in the uploaded PDF file. NOTE: We offer flexible financing solutions for all machines as well as a professional relocation service. Disassembly, transport, and professional assembly – everything from a single source. Billing according to individual terms and duration. Contact us for your personal offer. Hfjdpsxuqk Tsfx Ah Hjp

Condition: used, machine/vehicle number: 008158, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 120 mm Hjdpjw Tiv Hefx Ah Hefp No of Grippers: 9 Second flexible pusher: yes Panel Rotation Station: yes Thin sheet loading: yes

Condition: good (used), Year of construction: 2019, CNC through-feed center with dual clamp drive in X-direction and gantry design in Y-direction. The second gripper enables trimming down to 15 mm as well as continuous milling movement along the X-axis. The workpiece length is measured (X-direction) via sensor measurement. Working area: X-axis: 3,500 mm Y-axis: 950 mm Z-axis: 80 mm Milling spindle 12 kW HSK-F63, up to 24,000 rpm max. Hedpfxoxrahcs Ah Hefp 4-position linear tool changer for milling tools. Max. tool diameter: 120 mm Max. tool length: 100 mm Single pick-up station for ergonomic insertion or removal of tools into the machine. Additionally usable as extra tool positions for up to 11 virtual tools. Automatic length measuring system for tools in Z-direction. Drilling head DH 25 8H 1S - 17 vertical spindles - 8 horizontal spindles - Grooving saw in X-direction Dowel insertion unit with 2 tools Dowel diameter: 8 mm, lengths: 20-25-30-35 or 40 mm Air cushion tables at front and rear, foldable Machine software WOODFLASH with: - CNC Board (general machine operation) - Tool database (Tecno-Manager) - Programming editor External workstation license Dongle upgrade: 3D simulator with collision check for WOODFLASH at the machine Release of workpiece at the rear side of the machine Machine is supplied without tools and HSK holders

Year of construction: 2016, condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper Hfedpfsd Aqtrex Ah Hep -Sheet metal claws -Span width: 0 to 30 mm -Load capacity: 3000 kg -Number: 2x terminals available -Price: per piece -Weight: 15.4 kg/piece

Condition: new, Schunk SRU+ 40-W / 30052464 universal swivel unit + 2 x PZN+ 100-1 / 303312 universal gripper + SGE / 30077266 + 6 x BSWS-B 100 / 303027 jaw quick change system, unused, 100% functional, scope of delivery as per photos Hjdoi Ec Nkepfx Ah Hefp

Condition: new, Röhm RPP-125-1 / GA parallel gripper LA82x45 Id.170022 SN:B7952 ,unused in opened original box, 100% working, scope of supply according to photos Hfedpfx Aei Ec Dujh Hjp

Condition: new, Röhm RPP-125-1 / GA parallel gripper LA82x45 Id.170022 SN:Z6653 ,unused in opened original box, 100% working, scope of supply according to photos Hfsdpoi Ec D Aofx Ah Hep