Used Ribbon Loom for sale (133)

Condition: like new (used), Year of construction: 2003, functionality: fully functional, for sale are several Jakob Müller NFJM 53 - SPE 192 6/42mm 192 hooks from 1999 2000 and 2003 refurbished in 2024 like new for sale are several Dkodpfxov Hxq As Acnor Jakob Müller NFJM 53 - SPE 192 6/42mm 192 hooks from 1999 2000 and 2003

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: AN-No.: 88.04.017 D, 8 very clean (reworked) Jakob Müller Frick AG looms NF42 from 1988, 1989 and 1990 from my stock. Machines run perfectly, 100% functional (refurbished) 12 shafts, without creel, with Mütrans, partly Müdata 1 piece NF 2/84mm from 1989 for 6.900€ AN-No.: 88.04.017 D with Müdata and Mütrans, 16 stocks 3 pieces NF 2/84mm overhauled from 1990 for 6.500€ each AN-No.: 90.01.704 B AN-No.: 90.01.755 A AN-No.: 90.01.229 A 1 piece NF 2/84mm overhauled from 1989 for 6.500€ AN-No.: 89.00.118 D 3 pieces NF 2/84mm refurbished from 1988 for 6.500€ each AN-No.: 88.04.244 A AN-No.: 88.02.758 A AN-No.: 88.02.758 B The machines come from a curtain band production and were originally equipped with a Z compartment. They were converted to standard compartments as part of the general overhaul. Dogonl All tension trees and press rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or newly vulcanized. The central lubrication in the chain case has been optimized by us. All machines have the first shaft free (for heavier reeds) and have 12 shafts installed. All machines are equipped with Mütrans II. Individual machines with double belt take-off (heavy fabrics) can optionally be supplied. I think possible for 4-5 machines. It is also possible to equip it with finely knurled tension trees. I think it is also possible for 4-5 machines. All needle holders are suitable for double needles. For this purpose, two additional Mütrans II can be installed upon request. The machines have been rebuilt from scratch. All bearings, shafts and bushings have been checked and replaced if necessary. All swing arms have been checked and replaced if necessary. Installed are: 1st shaft free (spacer block installed) 2nd and 3rd shaft swingarm 201 4th - 6th shaft swing arm 202 7th - 9th shaft swing arm 203 10th - 12th shaft swing arm 204 13th shaft swing arm 205 All shaft springs have been checked and replaced if necessary. Nothing is porous, cracked or defective. The electrical installation has been checked, the circuit board for the thread monitoring has been checked and, if necessary, repaired or replaced. The machines are painted in RAL 6021 Müller pale green. All panels are clean and free of damage. The machines come without Müdata. 4 machines are also equipped with a crawler gear. The machines have been set up and tested. The machines come without oil, strands, slats, reeds, needles and chain links. Dedpfx Acjr Ix Igenskr Delivery on a Euro pallet, FOB Wuppertal

Condition: good (used), Twin Ribbon Mixer Fully Stainless Steel Dkodpfx Acequ Uykonjr Mixing Chamber Dimensions 1500mm Long x 1100mm Wide x 700mm Deep

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Capacity: 100 L Material of construction: 316 Stainless Steel Dksdpfszfh U Dex Acnor Width: 350 mm Horsepower: 1.5 kW Length: 1,000 mm Jacket: No Type Of Ribbon: Single

Condition: excellent (used), Prism Pharma Maxhinery ribbon blender. Vacuum option. Lovely condition. Direct from test facility. Dksdpfsx Axbcjx Acnor

Condition: used, Unloading at the bottom 2 engines (2 x 37 kW) dimensions (lxwxh): ± 7.300 x 2.280 x 2.600 mm dimensions bowl (lxwxh): ± 4.500 x 2.120 x 1.350 mm Dkedpfx Aeziab Docner suitable for steam injection (double-walled)

Condition: new, (made by N & N) Dkedszg E Udspfx Acner new ! all stainless steel capacity 300 L. (= ± 10CF) 3 x 400V, 5,5kW double Ribbon mixing arm dimensions: (l x w x h) : ± 1.900 x 670 x 1.740 mm (open lid : ± 2.140 mm) outfeed height : ± 720 + 20 mm safety lid CE-approved adjustable speed 2 mixing directions 5,5 kW Digital – touch screen with programs Perfectly suitable for dry products, such as: spices, ingredients, powders,…

Year of construction: 2025, condition: used, Ribbon inserter Müller Martini Ribbon A 751 Age 2025 - for inline or offline operation - State-of-the-art servo technology replaces mechanica! cams and drivetrains - fully automated with amrys Dkedpfx Aezgd Enecnor - operation via 1 HMI operating panel - runnig left to right - can be integrated in the Diamant Commander control console - operation trom the right Equipment: - lnfeed element for the mounting of a timed belt trom left or right - Vertical infeed channel - Timing of books with light barrier - Splitting of the book block in two positions via air jet - Ribbon inserting station standard for 1 or 2 ribbons - Ribbon positioning (pull-down) device for tight insertion of the ribbon into the spine - Vertical delivery channel with delivery to the left, horizontal delivery belt - Surcharge for belt with rolling knife edge for gentle transfer of sensitive products - Ribbon separation mechanism with heated cutter - Third ribbon - Conveyor system "Ribbon Bypass" General technica! data tor Ribbon: A751.8611 Max. mech. speed 3900 Cycles/h Size range: Book Block -min. WxHxT 70* x 11 0* x 5 mm -max. WxHxT 300 x 390* x 80 mm Ribbon -min. Wxl 3 x 200 mm -max. Wxl 8 x 530 mm * Size limitations see technica! data Connection values: - Electr. requirements: 2 kW - Compressed air requirements: 18 Nm3/h at 6 bar - Air requirements: clean and dry (pressure dew point 10°C be low ambient temperature) Net production output depends on paper, material, size, operator and climate conditions, etc.

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D60L/8489, Offer Number: D60L/8489 Machinetype: wire weaving loom Make: GERMAN Type: wireloom Constr. year: 1970 wire diameter range: 1,5-7 mm mesh width: 15-80 mm line wire distance: 15-80 mm Dksdpfx Acozbcthsnjr working width: 2100 mm mesh width automatic: 200 mm output - strokes/min: 22 Location: In our warehouse

Condition: like new (used), Butcher Boy BM1000 Ribbon blender Dodpfxehzbhnj Acnekr Stainless, 1000l ribbon blender, forward / reverse, twin discharge doors, safety guarded top, on mobile frame, 3Ph

Condition: good (used), Ribbon blender, paddle mixer, mixer, blending machine, turbulent mixer Inner surface made entirely of stainless steel Easy Clean system Capacity: 500 liters Motor power: 16.5 kW Mixing ribbon speed: +/- 156 rpm Dkedpfx Acowyf Ugjnjr Excluding motor base and belts Inlet diameter: 200 mm Outlet dimensions: 160 mm x 160 mm

Condition: used, Used AMIXON model HM 400 stainless steel vertical twin-shaft ribbon mixer. Manufacturer: AMIXON (Ruberg Mischtechnik KG) Model: HM 400 Gross volume: 530 litre (approximately) Working volume: 400 litre (approximately) Type of agitators: Twin shaft ribbons + side chopper Drive of agitators: 7/9 kW, 380 V, 970/1475 rpm (driven through gearbox) Drive of chopper: 5.5 kW, 380 V, 1475 rpm Dodpfx Acowr Dhcsnskr Includes: side inspection doors with dimensions 640 x 550 mm, control panel, hopper

Condition: good (used), Gardner 800l ribbon blender 800l ribbon blender, single shaft, stainless internals, swing top lid, discharge chute, 3Ph Dkodpfjlcdz Hex Acner

Condition: used, Comprehensively tested, used Kemutec approximately 400 litre working capacity (product dependent) 316 stainless steel ribbon blender. Trough measures approximarely 1680mm Long x 580mm wide x 700mm deep. Has stainless steel single interupted ribbon driven by 5.5kw motor & gearbox. Unit includes stainless steel hinged lid with clamps. Includes bottom discharge valve. Dkedjyma Dbjpfx Acnsr Specifications: Capacity: 14.1 ft³ Material of construction: 316 stainless steel Width: 22.83" Horsepower: 7.4 hp Length: 66.14" Jacket: No

Year of construction: 2000, condition: ready for operation (used), 3 Dilo needle looms are offered. 1) Pre-needling and finish-needling machine Dilo, DILOOM OD-II HVL 55, year of manufacture: 2000, number of needle boards: 2, working width: 5500mm, max. stroke frequency: 1000strokes/min, needle beam stroke: 60mm, needle board width: 200mm each, needle distribution range: approx. 3000-5000needles/m. 2) Double needle loom Dilo, DI-LOOM OUG-II S50, year of manufacture: 2000, working width: 5000mm, number of needle boards: 4, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle density: approx. 18000needles/linear m. 3) Pre-needling and finish-needling machine Dilo, DI-LOOM OD II 55, year of manufacture: 1998, working width: 5500mm, needling system: Downstroke, number of needle boards: 2, needle beam stroke: 60mm, max. stroke frequency: 1200strokes/min, needle board width: 200mm each. Inspection possible by appointment. Dkjdpfx Acszhntrsnsr

Condition: excellent (used), functionality: fully functional, 1 x Blendtech single shaft ribbon blender rice cooking system with side scrape. On weigh cells. Front end discharge. Dimensions of vessel approx. 900 mm wide x 900 mm deep. Dodpfx Aevxg Awscnjkr

Year of construction: 2026, condition: new, The 2000L horizontal ribbon mixer is equipped with a special ribbon agitator located in the center of the tank along its entire length. The entire machine is made of 304 stainless steel. - Capacity: 2000L - Motor: 7.5kW, 3-phase, 50Hz - Machine weight: 850kg - Dimensions: (L 2880 x W 1200 x H 2200mm) -we offer mixers from 200L to 3500L Dsdpfx Aoy Ew Tfscnjkr The mixer's interior and ribbon itself are polished to a high gloss, significantly simplifying and accelerating mixing, as well as facilitating cleaning after use. These mixers are used for mixing bulk, liquid, or semi-liquid materials. Primarily used in the chemical, food, pharmaceutical, agricultural, and construction industries.

Condition: new, T63290IO - Armor Dsdpfx Ask Abhaocnekr INKANTO thermal transfer ribbon, AWR 470 wax, 90mm, black INKANTO thermal transfer ribbon, AWR 470 wax, roll width: 90mm, core: 25,4mm, length: 450m, color: black

Condition: used, Year of construction: 2007, Manufacturer : SMIO Year : 2007 Model / Type: Ribbon mixer 300 L Djdpfx Acsx R Dmpsnekr Double jacket: yes Integrated heating: 2 immersion heaters Overall dimensions: 350 x 130 x 240 cm Material : stainless steel Variable speed drive Running direction: 2  

Condition: good (used), Year of construction: 2002, Vacuum cooker melter, ribbon blender, horizontal. For mixing and cooking under vacuum viscose products like processed cheese, pet food, standardization, etc. Double jacketed for indirect heating or cooling and direct heating by steam injection, 6 x steam injection ports. Max pressure in jacket 2 bar water or steam max 3,5 bar, CIP cleanable by 4 x spray balls. 1 outlet hatch pneumatic openable. With vacuum system, water dosing system with flow transmitter . Closed cover, pneumatic liftable, integrated liquid ring vacuum pump. Ingredient inlets: by separate elevator and standard 200 liter trolleys (elevator: KS type 602, 1,1kW - max 250 kg). Control panel with PLC (Siemens S7-300 controls), frequency converters. Display operation panel. Dimensions product room: 100 x 100 x 82 (lxwxh) cm. Documentation available. Dkodpfjw Uzzksx Acner

Condition: used, Lintmenger ribbon blender mixer Manufacturer: Morton Capacity: 1000 liters Motor power: 11 kW, 44 rpm Material: Steel See our other listings Dedpfx Aoxnkhxjcnskr VMA Wekerom

Condition: used, Lintmenger ribbon blender Manufacturer: Morton Capacity: 500 liters Dkjdpsxnkk Hefx Acnsr Motor power: 7.5 kW, 49 rpm Material: Steel See our other advertisements VMA Wekerom

Year of construction: 1970, condition: good (used), Technical Details : Wire range - 1- 7 mm Capacity - 15 - 25 cross wire /min. Mesh width - 10 - 100 mm Dodjd Nm Abspfx Acnokr Working width - max. 2.200 mm Engine power - 4 kw

Condition: good (used), Year of construction: 2002, Technical Details : - Year - 2002 - Capacity - 20m2/h Dkodpfx Acekuy Sbenor - max. width of mesh - 1000mm - Wire diameter range - 2mm - 5 mm Line includes : - Mechanical wire pay of - Crimping machine - Weaving looms machine with hydraulick agregat

Condition: good (used), Year of construction: 1989, machine/vehicle number: AN-No.: 89.04.019 A, 5 pieces Jakob Müller Frick AG NF 42 in 5x 4/42mm with Müdata, Mütrans, without gate, super clean from Germany 2nd hand Dodpfxer I Am Ho Acnjkr NF42 in 4/42mm from 1988-1990 AN. No.: 88.04.017 H ex.Alge, Müdata, 16 stocks very clean 7.000 Euro AN. No.: 88.04.169 D ex.Alge, Müdata, 16 stocks very clean 7.000 Euro No. 213 AN. No.: 89.04.019 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro No. 223 AN. No.: 89.04.046 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro AN. No.: 90.00.066 B ex.Alge, Müdata, 16 shafts very clean 7.000 Euro