Used Remaining Stock for sale (11,935)

Year of construction: 1985, condition: used, functionality: fully functional, PM 5 Paper Machine + Stock Preparation / Deinking Plant and Goebel U16M An integrated paper production installation in Hainsberg, Germany, is offered for sale. The PM 5 paper machine and its stock preparation/deinking plant are offered together. The Goebel U16M roll slitter rewinder is available separately. PM 5 was built in 1985 and modernised several times. Its main sections include the PAMA approach-flow system and Fourdrinier section; Voith headbox and SpeedFlow system; Valmet top-wire former; and PAMA press, dryer and after-dryer sections, calender and Pope reel. Bdodpfx Akoz Hvmhoiei Reported modernisations: Valmet top-wire former (1994); approach-flow system expansion and modernisation (2002–2003); MAP quality-control system (2006); Voith SpeedFlow (2009); automatic tail cutter (2025). PM 5 specifications - Working width: approx. 2,730 mm; trimmed width: approx. 2,640 mm - Maximum speed: up to 600 m/min - Maximum gross capacity: approx. 150 tonnes/day - Basis-weight range: approx. 45–130 g/m² - Grades produced include office, copy, writing, printing, envelope and newsprint papers - Installed electrical power: approx. 2.5 MW - Steam consumption: up to approx. 16 tonnes/hour Stock preparation / deinking plant - Normal capacity: approx. 125 tonnes/day; up to approx. 140 tonnes/day under suitable raw-material and process conditions - Essential components listed in the available technical documentation are reported to remain installed on site - Older Siemens S5 and Teleperm control and automation system Goebel U16M Built in 2005, machine no. 053-9031. - Working width: 2,800 mm - Maximum speed: 2,000 m/min - Maximum unwind diameter: 2,000 mm - Maximum rewind diameter: 1,500 mm - Minimum cutting width: 150 mm - Available accessories include winding shafts and an edge-trim extraction system with shredder and flat turbo disintegrator Operating status and sale terms Production stopped on 23 January 2026. According to the seller, PM 5 and the stock preparation/deinking plant were operating until the controlled shutdown. The Goebel U16M was also reported operational until that date, with no significant functional faults. Asking prices: - PM 5 and deinking plant: €2,200,000 - Goebel U16M: €250,000, offered separately

Year of construction: 2015, condition: ready for operation (used), 1) Eccentric screw pump Johstadt AFJ 70.1 S, year of manufacture: 2011. 2) Eccentric screw pump Johstadt FJ 70.1 S, year of manufacture: 2015. 3) Eccentric screw pump Stöber/HEW/Netzsch DC30-2061-200-U/EEXF100L/U/NE40B, year of manufacture: 1989. 4) Centrifugal pump Stork CN32-200G1S3L1, year of manufacture: 1997. 5) Centrifugal pump Siemens&Hinsch m.b.H/Loher&Söhne AKHK6101/eA132 MA-U, year of manufacture: 1970. 6) Centrifugal pump with electric motor EMK/SPX EC2-HS160M1-2/CC40-200 R6S2L2. 7) Electric motor Siemens 1LA2 130-2CA60, year of manufacture: 1997. 8) Electric motor VEM. VEM electric motor. 9) Electric motor with gearbox Nord SK 132 S/4-2 TF, SK 33-132S/4-2 TF, year of manufacture: 2011. 10) Blower Gebhardt Ventilatoren KEM 61-0200-4 X-14-11. 11) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 Dex 80L/4K, year of manufacture: 2015. 12) Side channel pump SERO/VEM SVM 111 K,V,60-2,32 kPER 80G4 FDS, year of manufacture: 2013. 13) Electric motor with gearbox Getriebebau Nord SK 132 S/4 TF, SK 472-132 S/4 TF. 14) Electric motor with gearbox Getriebebau Nord SK 25-100 L/4 ED, SK 100 L/4 ED. 15) Electric motor with gearbox Getriebebau Nord SK 100 L/40, SK 25-100 L/40. 16) Side channel pump SERO/HEW SVM 111 K,V,60-2,32 DCEx 80L/Ur, year of manufacture: 2015. 17) Centrifugal fan Hürner-Funken GmbH/MM Antriebstechnik HF R160-17D/FY 71 A-4 T, year of manufacture: 2001. 18) Centrifugal fan Konz Lufttechnik/ABB Motors MPR 351/M2V AD 80 B-2, year of manufacture: 2006. 19) Axial fan Helios HRFD 35/4 TK. 20) Centrifugal pump Bedu CRT 70/3, year of manufacture: 2015. 21) Electric motor with gearbox and magnetic field coupling Nord Drivesystems/Varisco SK 33-132MP/4 TF, V 60-2 STGTRM+X+Y, year of manufacture: 2017. 22) Pneumatic agitator PTM. 23) Pneumatic agitator. 24) Pneumatic agitator WP ARO MRV050A/6150051-14-P. Including various stators for progressive cavity pumps. Documentation available. On-site inspection is possible. Individual sale possible. Bodpsv Extbjfx Akijdi

Year of construction: 2008, condition: ready for operation (used), Three small window and profile processing machines are available. 1) Urban WS 103 water hole cutter, year of manufacture: 2008. 2) Urban AKS 1105 single-head automatic welder with new cylinder. 3) Stegmaier AK 84 flat threshold for window frames, year of manufacture: 1984. On-site inspection is possible. Individual sale possible. Bdedewwvwyopfx Akiei

Year of construction: 2012, condition: ready for operation (used), Various small devices for packaging processes are available. 1) Can seaming machine. 2) Nord SK 180E peristaltic pump, year of manufacture: 2016. 3) Miveg/MetalPack sealing machine. 4) Bourgeat water bath. 5) FP International FMini PakR air cushion machine. Documentation available. On-site inspection is possible. Bdedjwty Etopfx Akioi

Year of construction: 2011, condition: ready for operation (used), Various metalworking machines, including a larger Wagner radial drilling machine, are available. 1) Column radial drilling machine Wagner PRC 50, year of manufacture: 2011, drilling capacity (steel): 50mm, spindle stroke: 315mm, outreach range: 350mm-1600mm, spindle-base plate distance: 370mm-1270mm, speed: 2000rpm, machine dimensions X/Y/Z: approx. 2500mm/1100mm/2900mm, weight: approx. 3500kg. The machine has an unknown defect. 2) Column drilling machine Alzmetall AX3/SV, year of manufacture: 2000, drilling capacity (steel): 32mm, spindle stroke: 120mm, outreach: 293mm, column diameter: 115mm, table dimensions X/Y: 515mm/360mm, speed: 2250rpm, weight: approx. 300kg. 3) 2x metal circular saw Macc NTM 350, year of manufacture: 1998/2010, saw blade diameter: 350mm, cutting capacity: 120mm, weight: approx. 450kg. 4) Belt grinding machine Grit A/S GIS 150, year of manufacture: 2014, belt dimensions X/Y: 150mm/2000mm, motor power: 4kW, weight: approx. 100kg. An on-site inspection is possible. A package sale is preferred. Bsdpey Eqtijfx Akijdi

Year of construction: 1997, condition: ready for operation (used), Various devices and machines are available. 1) Small vibrating mill William Boulton. 2) Compressor motor KDT 2.80, power: 2.3kW, quantity: 3. 3) Roof ventilator, quantity: 2. 4) Oven. 5) Pump (DIA) SZ80-1KR 225. 6) Robot Fanuc M-410i, year of manufacture: 1997. On-site inspection is possible. Bdsdpfx Aewn H Uwokisi

Year of construction: 1999, condition: ready for operation (used), Three smaller metalworking machines are available. 1) Behringer HBP-340 band saw, year of manufacture: 1984, max. round material cutting capacity: 340mm, max. square material cutting capacity: 340mm/340mm, miter range: +/-45°, cutting speed: 100m/min, machine dimensions X/Y/Z: approx. 3100mm/1100mm/1700mm, weight: approx. 2000kg. 2) Löser SO 0337 belt grinder attachment, year of manufacture: 1999. 3) Knoll PF 70/180 belt filter system with filter fleece, year of manufacture: 1999, filter capacity per minute emulsion/oil: approx. 70l/50l, fleece width: approx. 540mm, tank volume: approx. 280l, machine dimensions X/Y/Z: approx. 1700mm/1200mm/750mm, weight: approx. 200kg. An on-site inspection is possible. Bdjdpsyypl Nefx Akiei

Year of construction: 2001, condition: ready for operation (used), Various lettershop and paper converting units are available. 1) MBO ET46 corner conveyor table, year of manufacture: 1991. 2) MBO ET46 corner conveyor table. 3) MBO Z2 knife folding unit. 4) Herzog + Heymann knife folding unit, year of manufacture: 2001. 5) MBO T45-2-X knife folding unit. 6) Böwe 310 Systec cutting module. 7) Nagel Citoborma 490 Vario SBT multi-spindle paper drilling machine. 8) Hunkeler paper unwind stand. 9) Herzog + Heymann shingle delivery, year of manufacture: 2001. 10) MBO FWIII 52/4 folding unit. 11) MBO T45-2-45/4 folding unit. 12) MBO FWIII 52/6 folding unit. 13) Hunkeler ARAW 50/20 paper unwind stand. 14) Böwe separating cutting module. 15) Herzog + Heymann 2-pocket folding unit, year of manufacture: 2006. 16) Herzog + Heymann 4-pocket folding unit, year of manufacture: 2001. An on-site inspection is possible. Bodpsziphaofx Akisdi

Year of construction: 1970, condition: ready for operation (used), Three old metalworking an tooling machines are available. 1) Milling machine Klopp FWU 13/6, year of manufacture: 1970, table length: 1905mm, machine dimensions with extended table: 2805mm/2000mm/1660mm, weight: approx. 2200kg. Without vice, with defective display. 2) Precision flat grinding machine Georg Müller MPS2, year of manufacture: 1971. 3) Plate shear Reinhardt RAS 52.80, year of manufacture: 1971, working width: 1540mm, power: 5.5PS, max. sheet thickness: 2mm, table height: 750mm, machine dimensions X/Y: approx. 2150mm/2020mm, weight: approx. 860kg. The mechanical lifting unit of the machine is defective. Documentation available. On-site inspection is possible. Individual sale possible. Bdjdpfeu Eumhjx Akisi

Year of construction: 1987, condition: ready for operation (used), 5 metalworking machines from various manufacturers are offered. 1) Column drilling machine VEB BS16, year of manufacture: 1960, weight: 110kg. 2) Milling machine Fritz Werner. 3) Pillar drilling machine Infratirea 4GC02502, year of manufacture: 1987. 4) Pillar drilling machine Infratirea, year of manufacture: 1987. 5) Radial drilling machine Tianjin No. 4 Z3063×20. Bdjdpfx Aezqfxdskiei

Year of construction: 2007, condition: ready for operation (used), Four metalworking machines are offered. 1) Cloos GLC 255 MIG/MAG welding machine, year of manufacture: 2004, dimensions X/Y/Z: approx. 980mm/450mm/700mm, weight: approx. 115kg. 2) Cloos GLC 353 MC3 MIG/MAG pulsed welding machine, year of manufacture: 2007, weight: approx. 160kg. 3) hebö Type II bar twister, year of manufacture: 1979. 4) Eisele VMS II PV-p circular saw, year of manufacture: 1974, weight: approx. 290kg. Inspection by prior arrangement is possible. Bdsdszp Rhhspfx Akisi

Condition: used, Year of construction: 2001, Laminating machine – Sheet-to-sheet laminator STOCK – 14R678-1650/P ref 3016 Year: 2001 Max. sheet size: 1650 x 1650 mm Automatic liner feeder Automatic bottom feeder for open flute, E, B, EB Side lay Press band Bjdpfxezhmnhj Akiedi Flip-flop function Stacker PRICE – must be sold quickly!

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (at tel. number). Greentec HS 212 Branch Cutter / incl. MS08 adapter plate / NEW unit / in stock & immediately available Price: €6,290.00 net / €7,485.10 gross - Working width: 2,100 mm - Cuts per minute: 250 - 450 - Max. branch diameter: 60 mm - Oil flow: 50 l/min - Pressure: 190 bar - Working speed: 5 km/h - Weight: 132 kg Optional: Flow divider with pressure relief valve - freely adjustable (50-90 l/min at 190 bar) = €660.00 net Description: - Clean and smooth cut of small branches and larger limbs up to max. 60 mm diameter - Sturdy frame beam made of high-strength steel - Lightweight construction - Low weight and flat housing for optimal visibility Bodpfx Ajzk S Tbokiodi - HIGH-POWER blade drive via planetary gearbox with constant torque during direction changes - 100% linear blade movement thanks to a cast iron constant power motor - Max. 450 cuts per minute - PRO CUT blade (Made in Germany) - Fine-toothed double-cut blades (ground on both sides) increase both the surface quality and the working capacity - Special blade guide made of wear-resistant plastic ensures smooth operation and long service life - Blade fingers with branch-saving function = remaining branches are not damaged - Long service life thanks to hardened and galvanized material - Easy and quick blade change - Sliding skid prevents damage from ground contact - Minimal wear and low maintenance - High working speed up to 5 km/h - Variable mounting position of the blade bar - Required hydraulic connections: 1x DW (1x supply + 1x return) Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse, we have a very large selection of various Greentec products that are immediately available! Mr. Herden (tel. number) will be happy to assist you. On request, we will also be happy to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We will supply you with the complete Seppi M. range! Errors and prior sale excepted! = Further information = New: Yes Part suitable for: Application forestry Please contact Marius Herden for more information.

Condition: used, Year of construction: 2004, machine/vehicle number: 20041227, type of input current: three-phase, total width: 2,500 mm, total length: 12 mm, total height: 1,700 mm, input voltage: 380 V, compressed air connection: 6 bar, overall weight: 5,000 kg, We are offering this used Stock Maschinenbau SFAM 2020 edge banding machine, manufactured in 2004. The associated press belt was manufactured in 2010, and the Meler hot melt glue applicator was manufactured in 2022. The working width for hot and cold glue is approximately 2100 mm! Type: SFAM 2020 Machine No.: 20041227 Bsdpfxezr N Hus Akisdi If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2020, condition: ready for operation (used), An autoclave Stock DFT including a Jumag steam system for the food industry is available. Batch trolley capacity: 2, process method: steam-water spraying, application: sterilization/pasteurization, gross volume: approx. 1550l, steam system: Jumag DG560, steam output: approx. 560kg/h. Including 6 batch trolleys. Documentation available. An on-site inspection is possible. Bedpfxjyh Nvge Akiedi

Condition: used, Year of construction: 2000, The Stock A-14 V567A/1650P is a high-speed laminating machine designed specifically for the packaging industry. It integrates advanced technology to efficiently laminate various materials, providing enhanced durability and protection to packaging products Format: 1640 x 1640 mm Equipment: Feeder: Edge Feeder (MIRUS) Sheet feeder by carrier chains Press Station Speed: 3,000 cycles/h Control device: Siemens SPS-Control / Micro Control System Gluing Station Laminating Station Technical Details Size max: 1640 x 1640 mm Bodpfjwcqwxox Akiodi Size min: 500 x 500 mm Sheet weight: Cardboard 100 - 800 g/qm Infeed height: 1,400 / 1,800 mm Carrier Sheets: one-sided corrugated board, E/B- and F-Flute, two-sided corrugated board up to 7 mm thickness cardboard from 0.5 mm thickness

Condition: like new (used), 800 m² Schäfer R3000 storage racking system, 3 levels Used, in excellent condition, like new, see pictures. 3-level shelving system from Schäfer Including lift Manufacturer: SCHÄFER R3000 CAD planning and assembly 3 levels Partial sale possible Negotiable price: upon request! Goods are in stock. Transport and assembly possible upon request. Inspection possible at any time by appointment. Further information available upon request. We constantly have over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Changes and errors in technical data, details and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse) Bdedshzw Ivspfx Akiji Lenox Trading – Top storage technology & heavy-duty racking, used & new Description: Are you looking for high-quality storage racking to buy? With around 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel structures immediately available • 30–50 semi-trailer loads of goods processed weekly for maximum selection 📦 OUR RANGE (BUY CHEAPLY ONLINE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving systems, tire racking, or racking for IBC containers – we deliver and assemble throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer storage technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round service package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including thorough cleaning. 2. Commission auction: Conducting auctions on behalf of clients. Our full-service provided by our own employees: cataloging, office preparation, inspection, goods handover, logistics, dismantling and thorough cleaning. Whether you found us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking systems – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 1235/1250P, cutting width (max.): 1,250 mm, working width: 1,250 mm, input current: 64 A, paper height (min.): 1 mm, paper height (max.): 10 mm, label length: 250 mm, working length: 1,235 mm, production capacity: 300 unit/h, STOCK LM 1235/1250P LAMINATION MACHINE | 1250 MM | GERMAN MADE For sale: STOCK LM 1235/1250P lamination machine manufactured by the German company Stock Maschinenbau GmbH. This machine is designed for laminating corrugated and solid cardboard with decorative paper, labels, and printed sheets, enabling the production of aesthetically pleasing packaging, promotional boxes, and display materials. The machine is equipped with an automatic gluing system, a label positioning system, and a pressure roller that ensures high-quality material bonding. Its robust German construction guarantees stable operation and low operating costs. Key advantages: • Working width of 1250 mm • Ability to laminate XL sheets up to 1620 x 1210 mm • Smooth speed adjustment • Smooth adjustment of the feed table movement • Automatic glue feeding and replenishment • Glue level sensor • Easy and quick adjustment of operating parameters • Central lubrication system • Pneumatic clutch • Cycle counter • Safety system: safety bar and scrapers Equipment: • Semi-automatic label feeder • Table for manual feeding of plano sheets • Manual feeding of corrugated cardboard or die-cuts • Gluing unit with automatic glue feeding • Sensor for detecting and registering labels • System for positioning and applying cardboard • Pressure roller • Receiving table for stacking finished parts • Central frame for mounting die-cuts Technical data: • Manufacturer: Stock Maschinenbau GmbH (Germany) • Model: LM 1235/1250P • Year of manufacture: 1995 • Maximum working width: 1250 mm • Size of laminated sheets: up to 1620 x 1210 mm (length virtually unlimited) • Thickness of laminated materials: 0.8 - 10 mm • Performance: approximately 300 cycles/h Bodpfx Akezd Dwloisdi • Power supply: 380 V / 50 Hz • Power: 18 kW • Power socket: 64 A • Machine dimensions: 6720 x 1910 x 1580 mm This machine represents an economical solution for companies seeking an efficient and reliable laminator for the production of premium packaging. The German construction guarantees durability, stable operation, and ease of use.

Condition: ready for operation (used), Kuka Robot KRC 2 ED 05 in stock, complete Bedo Ag Sq Rspfx Akiedi Robot panel Control cabinet cable

Condition: used, Hydraulic machine vise, high-pressure clamping device RÖHM - DECKEL, type RB 160 Hydraulic vise, clamping device Jaw width: 160 mm Bdedpfx Aj Agw D Ujkioi Jaw height: 49 mm Clamping force: 5 tons Clamping range: 0 to 300 mm Opening width: max. 308 mm Clamping range: approx. 100 mm (per step) Guide rail height: 118 mm - Clamping force adjustable in 4 steps - 3 clamping ranges adjustable via locking pins - Rotating plate with degree scale Dimensions L x W x H: 570 x 350 x 167 mm Weight: 76 kg Very good condition

Condition: excellent (used), lifting height: 6,000 mm, Year of manufacture: 2026 Bodpfxsz I Afys Akiedi Year of construction: 2026 Drive: Track Empty weight: 1.640 kg Working height: 800 cm CE mark: yes Technical condition: very good Visual appearance: very good Front tyres / undercarriage remaining: new Rear tyres remaining : new Transport dimensions (LxWxH): 2,05x0,98x2,14 Please contact Bas Sindorf , ) for more information

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 02/2007, loading space length: 13,580 mm, loading space width: 2,490 mm, loading space height: 2,660 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 8,790 mm, color: white, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: BPW EcoPlus Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 20%; Tyre profile right: 20% Weights Empty weight: 7.790 kg Carrying capacity: 33.210 kg GVW: 41.000 kg Functional Make of bodywork: Groenewegen Plywood Box Maintenance APK (MOT): tested until 02/2027 History Number of owners: 1 Condition Bdedpfo Adp D Uex Akiji General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: like new (used), stock of parquet flooring Bsdpfe Af Tp Asx Akiedi various wood types quantity: 8 full semi-trailer trucks

Condition: used, axle configuration: 3 axles, first registration: 04/2017, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, tire size: 385/65R22.5, tire condition: 50 %, color: white, Equipment: ABS, General Information Year of manufacture: 2017 Axle Configuration Tire size: 385/65R22.5 Rear axle 1: Tire tread: 50%; Reduction: single reduction Rear axle 2: Tire tread: 40%; Reduction: single reduction Rear axle 3: Tire tread: 50%; Reduction: single reduction Weights Unladen weight: 7,200 kg Payload: 33,800 kg GVW: 41,000 kg Functional Body manufacturer: Krone Condition Bsdpfx Ao Ahikmjkisdi Damage: none = Company Information = Heisterkamp Used Trucks BV doesn’t just sell used trucks – we are a reliable part of Heisterkamp Transportation Solutions. We take care of used trucks and trailers that are immediately ready for use. From our location in Oldenzaal, we carefully select vehicles that are reliable, meet today’s requirements, and comply with the high standards of our industry. Details - Address: Hanzepoort 25E, 7575 DB Oldenzaal, Netherlands - Telephone: - Email: - Website:

Condition: excellent (used), mileage: 195,535 km, power: 132 kW (179.47 HP), first registration: 05/2009, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, number of seats: 3, loading space length: 5,280 mm, loading space width: 2,340 mm, loading space height: 2,410 mm, Equipment: ABS, electric window regulation, power mirror, spoiler, = Additional options and accessories = - 3 chairs - Radio Bodpfx Akj Agcrnsisdi - Rear doors - Roof Spoiler - Sun visor = More information = Number of doors: 2 Year of construction: 2009 Cab: single Front axle: Steering Rear axle: Double wheels GVW: 8.000 kg Technical condition: very good Visual appearance: very good = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A