Used Profile Sanding Machine for sale (94,719)

Condition: new, Year of construction: 2024, Bending machine ZB 70/3 H NC Zopf Gjdpfx Asfkz Rboacskc - semiautomatic - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to - adjusting way: 120 mm - weight: 490 kg - dimensions: - colour RAL5012 / RAL7015 NC-CONTROL for ZB 70/3 HA: - two axes controlled - touch screen - memorise of 1000 programs ech 19 steps - interpolation - accuracy of the y-axes 1/10 mm - programmable forward and backward

Condition: used, Year of construction: 1993, Used machine Year of construction 1993 Edge sanding machine with electromechanical oscillation through 15 mm pendulum stroke of the motor disk Swivel of the sanding unit by 90° using a hand crank (infinitely variable angle adjustment; read off by scale) Attachment table with suction for using sanding rollers Height-adjustable table for utilizing the sanding belt Motor 2.2 kW Oscillating motor 0.11 kW Table size 880 x 370 mm Belt dimension 150 x 2580 mm Dimensions 1700 x 1000 x 1150 mm Weight 250 kg Godpfx Ajwka Tfoacjkc Availability: short term Storage location: Röllbach

Condition: as good as new (ex-display), OMEC HP110 HYDRAULIC PROFILE BENDING MACHINE with PLANETARY MOVEMENT and DOUBLE ROLLER FEED – 3 DRIVE ROLLERS - Gsdpfxow Ax Avs Aacskc TECHNICAL SPECIFICATIONS: - Hardened UPPER SHAFT diameter: 120 mm - Hardened LOWER SHAFTS diameter: 100 mm - Hardened UPPER ROLLER diameter: 320 mm - Hardened LOWER ROLLERS diameter: 300 mm - Working table height in horizontal position: 900 mm - Working table height in vertical position: 1600 mm - Installed power: 5.5 kW - Total weight: 3,800 kg - Overall dimensions (W x D x H) in horizontal position: 1400 x 1920 x 1370 mm Reference material: Yield strength 250 N/mm², Tensile strength 460 N/mm² PERFORMANCE: (material: Commercial grade steel) - Solid square section 60x60 mm – min. bending diameter 770 mm - Upright flat bar 100x30 mm – min. bending diameter 1,500 mm - Flat bar 150x35 mm – min. bending diameter 1,000 mm - Solid round bar 70 mm – min. bending diameter 900 mm - Angle profile external leg 100x100x10 mm – min. bending diameter 1,000 mm - Angle profile internal leg 90x90x10 mm – min. bending diameter 1,000 mm - Tube 4" thickness 4.5, Ø114 mm, thickness 4.5 mm – min. bending diameter 1,400 mm - IPE flat flange 160 mm – min. bending diameter 1,200 mm - IPE upright flange 100 mm – min. bending diameter 1,750 mm - HEA flat flange 120 mm – min. bending diameter 1,500 mm - Square tube 80x80x4 mm – min. bending diameter 1,200 mm - UPPER SHAFT: Ø120 mm - Set of hardened rollers - Hydraulic 3-axis guide rollers for profile containment during bending, operated from the control console. These supports securely hold and guide the profiles both internally and externally, moving on three axes controlled by the operator. Manual profile guidance during bending phases is no longer required, as it is operated directly from the control console. - 2 digital position indicators for the bending rollers - Two rotation speeds (Slow/Fast) - Mobile control console - Dual Hydraulic drive (powered upper roller and 2 lower rollers) - Work axis configurable for both horizontal and vertical positions - Operating and maintenance manual - CE mark - Service keys

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: AR200, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG, controller model: EVO, number of rollers: 3, shaft diameter: 200 mm, rotational speed (min.): 5 rpm, rotational speed (max.): 5 rpm, power: 29.42 kW (40.00 HP), input voltage: 400 V, type of input current: three-phase, operating pressure: 240 bar, Equipment: CE marking, documentation/manual, emergency stop, hardened rollers, Profile bending machine model AR200 brand MG srl year 2016 Machine in perfect condition, very little use Gkjdexb Ecwopfx Aacjc Capacity chart of the machine in enclosed. Model AR200 Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic with gear unit each shaft side arms hydraulic move in 3 direction for keeping guided the profile being formed. NR. 2 set of rollers with the machine for pipe bending SIZE 159MM - SIZE 139,7 MM -Control panel console CNC programmable with automatic rolling, touch screen 15” , display the 9 axis of the machine with readout for manual use and fully programmable automatic forming -Electric power supply 3phase 400/50 Vac -40HP -Service manuals and operation books original. Additional set of rollers and tooling for specific application can be provided upon request Bending for HEB - IPE -UNP - ANGLE – T -SECTION- TUBULAR- IRON BAR ON EDGE -ETC..

Condition: excellent (used), Carousel sanding machine Intorex LTA 1300 Max working length: 1300 mm Max sanding diameter: 160 mm Spindle motor power: 3 HP Total power: 3,2 kW Output up to: 960 pcs / hour Net weight: 75 kg Gross weight: 1200 kg Gjdpfx Aasirt Ivjcjkc Dimensions: 2,5 x 1,2 x 1,6 m Sander for turned pieces with a drum with 6 spindles and a adjustable rotating speed between 0,5 and 5,5 rpm. The working system operates through a rotating drum and 5 lines of oscillating brushes equipped with grooved sanding belts of different grades. Centering, holding and ejection is effected on automatic cycle by a cam installed in the drum.

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Gsdpfx Aoh A S Htsacskc Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 150 h, excellent condition BIRLIK PBM 35 profile bending machine, pipe bending machine for sale manufacturer BIRLIK Makina type: PBM 35 year of manufacture: 2007 Shaft diameters: 50mm Roll diameters: 155mm Godpjxc N Rhsfx Aacskc Upper roller diameter: 148mm Working speed: 4.5m/min Motor power: 1.5kw Voltage: 3phase 380v 50Hz 3.8A Machine width: 700mm Machine length: 900mm Machine height: 1400mm Machine weight: 375kg Bending capacity: I-steel - flat 120 x 15 (d 750) mm I-steel - on the edge 60 x 10 (d 800) mm Angle steel 50 x 5 (d 1200) mm Round material 35.0 (d 800) mm Max. pipe diameter 70 x 2 (d 1200) mm Square material 50 x 40 x 3 mm

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Scope of delivery: - Table extension - Rubber rollers With veneer edge sanding device with contact shoe With fine adjustment and fence rulers With grooved infeed fence for veneer overhangs Gedpfx Aasw I Up Uscskc Quick switch between veneer edge and solid wood sanding possible Approximate dimensions: Length (product): 1900 mm Width/Depth (product): 900 mm Height (product): 1350 mm Net weight: approx. 290 kg Oscillation motor power: 0.25 kW Extraction port diameter: 140 / 100 mm Height adjustment of longitudinal table: 230 mm Min. cross table height: 720 mm Working table length: 960 mm Working table width: 350 mm Working table height adjustment: 230 mm Connection voltage: 400 V Phase(s): 3-phase Current type: AC Mains frequency: 50 Hz Sanding belt length: 3000 mm Sanding belt width: 200 mm Belt running speed(s): 20 m/s Oscillation stroke: 20 mm Sanding surface length: 1050 mm Sanding surface width: 200 mm Includes: 1 pack sanding belts K 80 1 pack sanding belts K 120 Availability: short-term Location: Hochheim

Condition: excellent (used), Year of construction: 2004, I sell the widebelt sanding machine COSTA S CCTT 1350, year 2004. Configuration: 1pc. hard rubber cylinder 1pc. soft rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Gjdpfjvxd Ttex Aacskc Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 4 motors total power 96kW Condition very good ! Available immediately.

Condition: excellent (used), functionality: fully functional, spindle diameter: 30 mm, overall weight: 950 kg, table length: 1,100 mm, table width: 850 mm, SPINDLE MOULDER IN EXCELLENT TECHNICAL AND VISUAL CONDITION TECHNICAL SPECIFICATIONS: - Tiltable spindle from -10 to 45 degrees - Quiet operation - Control panel operation - Polish manufacturer - Table dimensions: 110 x 85 cm - Carriage with spindle approach and height adjustment - Carriage dimensions: 90 x 40 cm - Material clamp - Spindle speeds: 3000/4500/6000/9000 rpm - Model: DFCB Jaroma - Extraction connection 140 mm and 80 mm - Spindle height adjustment - Original factory paintwork - Motor power: 4.5/5.9 kW - CE mark - Fully adjustable fence Machine dimensions: - Length: 3200 mm - Width: 1900 mm - Height: 1750 mm - Basic machine weight: 650 kg - Weight with full equipment: 950 kg Machine financing available via leasing or installments. Just visit our website: jbsmaszyny.pl Gkodpfx Aoxlyhcsacec You are welcome to test the machine. Where can you see our machines? JBS MASZYNY STOLARSKIE WOLICA DRUGA 26 23-310 MODLIBORZYCE Nationwide machine transport! Tel: 663 495 647 German Tel: 664 335 475 English Tel: 530 632 386 English

Condition: excellent (used), ITALMECCANICA PROFILWOOD MAK6B Automatic Grinder / Sanding machine 6 sanding units, each 1.5 kW, max. working width 250 mm, Depth 0-250 mm, min. Dimensions in mm: approx. 4700 x 2000 x 2300, Weight in kg: approx. 3000, Gsdpjdykwljfx Aacekc (Makor, Delle Vedove, Venjakob, Flader)

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Gedpfx Aajuz If Necekc Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, TECHNICAL DETAILS - internal dimensions : 1000 x 800 x 700 [mm] - floor space : 2000 x 1000 x 2000 [mm] - weight : 320 [kg] Gjdpfx Aeug U Ifoacjkc

Condition: used, Year of construction: 1991, Used machine Used profile sanding machine of the company Arminius type ST 10 Year of construction: 1991 MNo.: 0-290-02-1567 Engine power: 1.1 kW Spindle adjustment: 0° - 135° Table surface: 1000 x 800 mm without visible objects on the table surface Availability: short term Gkodpfow I Unkex Aacec Location: Röllbach

Condition: excellent (used), Year of construction: 1997, I sell the widebelt sanding machine COSTA 71 CTT 1350, year 1997. Configuration: 1pc. hard rubber cylinder Gkodpfx Aexlk Rbjacjc 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 3 motors total power 55kW Condition very good ! Available immediately.

Condition: good (used), functionality: fully functional, degree of automation: manual, actuation type: electric, number of rollers: 3, shaft diameter: 130 mm, roller diameter: 380 mm, rotational speed (min.): 5 rpm, overall weight: 4,500 kg, power: 15 kW (20.39 HP), input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, emergency stop, PROFILE BENDING ROLL 130- MODEL PARMIGIANI ITALY ELECTRO MECHANICAL MACHINE SHAFTS OUTPUT DIA..130 MM 3 ROLLERS PYRAMID UPPER ROLL DRIVEN ROTATION WITH GEARUNIT ONELECTRIC MOTOR Kw 11 SIDE ROLLERS BENDING POWERED ON ELECTRIC MOTOR Kw 3 Gjdpfx Ajxackcoacskc UPPER ROLL DIA 380 mm SIDE ROLLERS DIA 350 mm CONTROL PANEL UPGRADED LATEST TECHNOLOGY ELECTRIC INVERTERS FULL POWER CONTROL WITH INFINITE VARIABLE SPEED COMMANDS ELECTRIC ON PORTABLE PUSH BUTTONS DIGITAL POSITION READOUT OF THE BENDING ROLLERS WEIGHT OF THE MACHINE 4,5 TON SAFETY AND EMERGENCY SYSTEM INSTALLED MACHINE WORK WITH VERTICAL SHAFTS

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, functionality: fully functional, total length: 2,150 mm, total width: 1,000 mm, total height: 1,550 mm, type of input current: three-phase, overall weight: 700 kg, workpiece weight (max.): 500 kg, input voltage: 400 V, feed rate X-axis: 30 m/min, conveyor belt width: 400 mm, power: 2 kW (2.72 HP), input frequency: 50 Hz, SA250 or SA380 profile sanding machine for glazing bars, boards, beams and more. The SA380 brush sanding machine offers the following advantages: Gsdjw Av Ivjpfx Aacskc 1. Flexible: All profiles, including beams up to 400 mm wide and 260 mm high 2. Mobile: Mounted on wheels and can optionally be equipped with a mobile extraction system 3. Powerful: Automatic feed of 13–30 m/min ensures high throughput 4. Top results: 8 axes with flexible Fladder brushes deliver a perfect finish: 4 sand WITH and 4 sand AGAINST the feed direction (on 4 sides, 2 per side) 5. Safe: Completely enclosed design, requiring only a single 120 mm dust extraction connection The SA250 and SA380 are built to be extremely robust and are manufactured entirely in Denmark. We currently have two demonstration machines in stock.

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Godpsi Duh Iefx Aacokc Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC Thread, Gear, and Profile Rolling Machine Model ROLLEX 1 Substructure: The substructure of the thread and profile rolling machine consists of welded steel profiles, partially covered with sheet metal. The space for the process lubricant reservoir is located in the front area of the substructure. Main drive: The main drive generates the rotary motion of the rolling tools required for gear rolling. The drive motor is flanged to the base plate of the rolling spindle bearing via the Cyclo Drive gearbox. The rotary motion is transmitted to the rolling spindle via the Schmidt coupling. The machine operates in a speed range of 0 to 30 rpm, with this range further subdivided into 0 to 20 rpm for continuous operation (S1) and 20 to 30 rpm for intermittent operation (S4). The speed is continuously adjustable using a frequency converter. Brand PROFIROLL Type ROLLEX 1 Year of manufacture 2003 Control, Brand, Type Siemens, Sinumerik, 840D Motor power (kW): 18 kW Electrical connection: 400 V Rolling range: Max. rollable workpiece diameter: 40 mm Rolling carriage stroke: 2 x 80 mm Min. / max. center distance of rolling spindles: 160 / 320 mm Rolling spindle height above the machine bed: 160 mm Gjdsv Uxq Sepfx Aacjkc Max. tool diameter: 250 mm Rolling spindle mounting diameter: 120 mm Rolling spindle mounting length: 80 mm Power & Drive Max. rolling force: 100 kN Rolling spindle speed, continuously variable 0-30 rpm Motors Rolling spindle drive: 2 x 13 Nm Hydraulics 50 Hz: 5.5 kW Process lubrication 50 Hz: 0.1 kW Central lubrication 50 Hz: 0.06 kW Temperature range: +5–+40 °C Current type/frequency: 3 N/50 Hz Nominal voltage: 400 V Control voltage: 24 V Auxiliary voltage: 24 V/230 V Connected load: 18 kW Nominal current of the machine: 39 A

Condition: new, Year of construction: 2022, Exhibition machine Year of manufacture: 12/2022 Features and technical data: DESCRIPTION • Grinding unit tiltable by hand crank • The machine frame made of welded steel ensures high torsional rigidity and vibration-free operation • Oscillating sanding belt with a separate geared motor for improved sanding results • Oscillation can be switched on or off as needed • Sanding platen with graphite coating for longer belt life • Height-adjustable sanding table to utilize the entire belt width • Auxiliary table for sanding radii with integrated extraction ports • Sleeve sanding device with attachable work table • Spring-loaded belt tension automatically compensates for belt length differences • Equipped with adjustable stops, ideal for veneer sanding • Veneer overhang can be sanded off effortlessly TECHNICAL DATA Dimensions and weights Product length approx. 1700 mm Product width/depth approx. 1000 mm Product height approx. 1150 mm Net weight approx. 300 kg Gksdow I Uvzjpfx Aacoc Drive power Oscillation motor power: 0.11 kW Extraction connection Extraction port diameter: 2 x 100 mm Work tables Table length: 950 mm Table width: 450 mm Table height adjustment: 110 mm Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Grinding unit Sanding belt length: 2640 mm Sanding belt width: 150 mm Belt speed: 14 m/s Oscillation stroke: 15 mm Sanding area length: 800 mm Sanding area width: 150 mm Tilt range of grinding unit: 0–45° SCOPE OF DELIVERY • 1x sanding belt K100 • 5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm • 6x sanding sleeves K80 – Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm • Standard tool kit • Mitre gauge Location: Hochheim Availability: Immediately

Year of construction: 2019, condition: ready for operation (used), General Data Measurements width 700 mm Measurements depth 4000 mm Measurements height 1300 mm Machine weight 1500 kg This TFM GM-SB-38CNC-2A1S was manufactured in 2019. It features a max bending capacity of 38 × 2 mm, bending speeds up to 65 °/sec, and motor power of 4 kW. Ideal for precise bending with a max bending angle of 180° and effective length over mandrel of 3200 mm. Consider the opportunity to buy this TFM GM-SB-38CNC-2A1S profile bending machine. Contact us for more information. Gsdpfx Aaow Uaiascskc Application Types Rolling

Condition: good (used), Brand Ercolina Model CE40H3 Year of manufacture 2006 Hydraulic drive Roller diameter Ø 165 mm Shaft Ø 40 mm Tube capacity (thin-walled) Ø 70x1.5 mm min. Ø 700 mm Tube capacity (thick-walled) Ø 2" x 3.2 mm min. Ø 450 mm Angle section capacity 50x50x6 mm min. Ø 400 mm Flat bar capacity 50x10 mm min. Ø 250 mm Flat bar capacity (hard edge) 100x15 mm min. Ø 250 mm Box section capacity 50x50x3 mm min. Ø 500 mm Shaft capacity Ø 35 mm min. Ø 250 mm Power 1.85 kW Gsdpsw Hx Tvsfx Aacjkc Bending speed 10 rpm.

Condition: good (used), Radii from 2 mm to 12.5 mm. Expandable up to 25 mm. 45° bevels up to 16 mm wide. Workpiece support extendable up to 380 mm. Optional feed system available. You will receive an invoice with VAT shown separately. Price applies ex stock Haldensleben. Gksdow Sw Syspfx Aacjc

Condition: new, Year of construction: 2024, working width: 950 mm min. workpiece height: 4 mm Gkodpfx Aaeknyhlscjc max. workpiece height: 170 mm height adjustment: electrically read out height: digital electronic control: Fox 500 KTR aggregates: 1 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad dust brush: no motor power: 7,5 kW suction connection: 140 mm machine length: 1388 mm machine width: 1545 mm machine height: 1668 mm weight: 660 kg

Condition: used, Year of construction: 2002, Used machine Year of manufacture 2002 Gedpfx Aaew I U Ahecskc Edge sander with electromechanical oscillation with a 15 mm pendulum stroke of the motorized disc Swivel of the sanding unit by 90° using a hand crank (continuous angle adjustment; read off the scale) Additional table with extraction system for using sanding rolls Height-adjustable table for utilizing the sanding belt Motor 2.2 kW Oscillation motor 0.11 kW Table size 880 x 370 mm Belt dimensions 150 x 2580 mm Dimensions 1700 x 1000 x 1150 mm Weight 250 kg Availability: Short-term Storage location: Flörsheim