Used Profil Sparying Machine for sale (66,497)

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable Gtsdsd E A I Ispfx Afnou - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q Gtedpfxsh A S Hts Afnsu serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift Gedpfx Afouz If Nsnotu - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Machine. No. 529A059 Year of manufacture approx. 1970 Gtsdpfx Aei Duh Ijfnou Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition

Condition: new, 10 quick-change plates, each with 2 rolling stations (suitable for three-star rollers) Shaft diameter 50 Upper shaft adjustable Lower shaft centrally adjustable Godpfxjur Ncvs Afnjtu Upper and lower shafts with axial adjustment and counters (We are also happy to offer profile rollers with a corresponding design)

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 12,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Godpfjw A H T Aox Afnotu Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: used, Number of spindles 4 St. Number of tools 11 St. Spindle diameter 50,40 mm Spindle length 285,125 mm length 4000 mm width 2000 mm height 2200 mm Weinig Univar 10/3 folding machine ----- For milling around windows, doors and the like with uneven circumferential profiles. Machine suitable for wood thickness 68 to 92 mm Time required per frame milling, medium size 1.20 x 1.20 m - approx. 2 minutes. The available tool positions are selected using a selector switch on the control panel retrieved. Machine with 3 hydraulically controlled right precision Lifting spindles for holding 3 tool sets, 2 x 95 mm spindle stroke per spindle The spindle stroke takes place in a U-movement, so that the opening is possible for short parts The milling stop remains as small as possible. Spindle stroke horizontally fine Adjustable for both tool positions from the operator side. Central lubrication for the spindle units. The 1. Spindle can be selected in right-left rotation. This spindle dips the last 100 mm of each frame end appropriate synchronization tool into the passing wood. Through this This prevents the tool of the subsequent milling spindle from running in the opposite direction working, causing tearouts. Excavation of the first 7 transport rollers using Footswitch. This shortens the lead time. An additional The support rail also allows large-format frames to be milled around. Continuous, chainless rubber roller feed with extreme short roller spacing. Height adjustment of the feed bar electrically readable. Electrical version according to VDE. Machine including operating tools, but without processing tools tools. Technical data: Working width min. 40 mm Working height min. 30 mm, max. 100 mm 1. Profiling spindle (synchronous and counter-rotation) ----- -- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm with synchronous automatic immersion 2. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 3. Profiling spindle ----- Motor strength lifting spindle 11.0 kW Spindle speed 6000 rpm Spindle diameter 50 mm Clamping length 285 mm Tool zero flight circle 112 - 140 mm Max. tool - D : 232 mm Spindle stroke vertical 2 x 95 mm for 3 tools Gtjdpfjvnv Uuox Afneu Basic position under table 10 mm (adjustable up to 20 mm) Spindle stroke horizontal 80 mm 4. Profile spindle - fitting unit on the right ----- For milling the fitting groove in the milling cycle or for grooving in the longitudinal profile. Pneumatic horizontal movement with Selector switch in the control panel. Motor 2.2 KW Speed 6,000 rpm Spindle diameter 40 mm Clamping height 125 mm, 2 tools Tool flight circle min. 140 mm, max. 180 mm Motor power feed 1.1 kW Feed speed 6 - 12 m/min. ...

Condition: new, Ring-profile bending machine Akyapak APK 81 I-steel - upright 100 x 20 (d 2100) mm Gjdpod R Iqusfx Afnjtu raw diameter max. 100 x 3 (d 3000) mm angle steel 80x80x8 (d 2000) mm square steel 50 x 25 x 2 (d 600) mm I - steel - flat 120 x 30 (d 600) max.140b mm solid material - diameter 60,0 (d 1000) mm tool holder 80,0 mm Speed 4,2 m/min. Weight 1.600 kg Dimension L-W-H 1240 x 1375 x 1540 mm Equipment: hydr. roller drive planetary gear feed of the 2 lower rollers for extra small bending radii hardened tool holder (42CrMo4) standard roll set, hardened mobile control panel 3 driven rolls digital display machine can be used horizontally and vertically CE-sign / declaration of conformity Operating instructions in German

Condition: new, Akyapak Akbend ring APK 35 profile bending machine Description •. base Gtsdped Er S Ijfx Afnou • horizontal and vertical working • Foot switch • Standard rolls (shared) • 2 driven rollers • CE mark / conformity declaration • User manual in German Technical details • I - steel - flat: 120 x 15 (d 750) mm • I steel upright: 60 x 10 (800 d) mm • Angle steel: 50 x 5 (1200 d) mm • Round material: 35.0 (800 d) mm • Max size: 70 x 2 (1200 d) mm • Square material: 50 x 40 x 3 mm • Bending speed: 4.3 m / min • Diameter of the roller - top: 155 mm • Bore: 50.0 mm • Total power: 1,5 kW • Weight: 320 kg • Dimensions L W H: 730 x 830 x 1350 mm

Condition: new, Akyapak Akbend ring profile bending machine APK 50 Description - lower roll adjustment, hydraulic both lower rolls can be adjusted - horizontal and vertical working - Control panel ( the position of the lower rolls is shown in the display ) Gtedpfx Aed Er S Aefnou - Standard rollers included - 3 driven rollers - CE-sign / declaration of conformity - Instruction manual Technical details - Bending capacity see performance table - bending speed : 4,4 m/min - Roll diameter : 157 mm - Shafts : 50,0 mm - total power requirement : 1,1 kW - weight: 500 kg - Dimension L-B-H: 950 x 700 x 1220 mm

Condition: new, Ostas Hydraulic Profile Ring Bending Machine OPK 45 - 3 Special equipment included in the price: 3 driven rollers Digital display Incl. standard roller set steel Description Hydraulic / motorized ring bending machine Gjdpfx Ajg Tzbwefnotu horizontal and vertical applicable with 3 driven rolls 3 rollers motor driven Feeding of the upper roller hydraulic Rollers are hardened Left/right rotation by means of foot pedal Shaft 50mm roller-Ø top 158 mm roller-Ø bottom 158 mm Speed 4,5 m/min Motor power : 0,75 +1,5 kW Electrical connection 400 V According to CE standard Weight 420 kg

Condition: new, Ostas hydraulic profile ring bending machine OPK 45 2 driven rollers Digital display Incl. standard steel roller set Description Hydraulic / motorized ring bending machine Can be used horizontally and vertically with 2 driven rollers 2 rollers motor-driven Adjustment of the upper roller hydraulic Rollers are hardened Left/right rotation using foot pedal Mounting: shaft 50mm Roller diameter at top 158 mm Roller diameter at bottom 158 mm Speed 4.5 m/min Motor power: 0.75 +1.5 kW Electrical connection 400 V According to CE standard Weight 420 kg Gtodpfx Afsvmzfienou

Condition: new, Ostas profile ring bending machine OPK 85 Technical specifications: - tool holder, shaft: 80mm - tool: 245mm - working speed: 6m/min - Engine: 4kw - Dimensions L-W-H: 1020x1460x1350mm Gsdpefig A Nofx Afnjtu - Weight: 1800kg - 3 rollers driven - Hardened standard rollers - Hardened and ground tool holder, shaft - Mobile control panel - Horizontal and vertical working position - Side angle guide rollers - Digital displays (2pcs.) - Brake motor - According to CE-Norm

Condition: new, Tubend hydraulic profile ring bending machine HPK 50 3 driven rollers Digital display Incl. standard roller set steel Hydraulic / motorized ring bending machine Can be used horizontally and vertically with 3 driven rollers 3 motor-driven rollers Hydraulic infeed of the top roller Hydraulic: 8 tons Rollers are hardened Left/right rotation via foot pedal Mounting: shaft 50 mm Roller Ø 162 mm Speed: 4.5 m/min Motor power: 1.1 kW Electrical connection 400 V According to CE standard Gtjdpfxeum R U As Afneu Weight 510 kg L.W.H. 810 x 950 x 1500mm Power table see PDF file

Condition: new, Balkaya Profile Ring Bending Machine HBM 80 Technical specifications: Tool holder, shaft: 80mm tool: 245mm working speed: 4,5m/min Motor: 4kw Hydraulics: 30 to dimension L-W-H: 1450x1050x18000mm weight: 1400kg Gtedpsh T Ulnofx Afneu 3 rollers driven Hardened standard rollers Hardened and ground tool holder, shaft Mobile control panel Horizontal and vertical working position Digital display According to CE standard

Condition: new, Ostas profile ring bending machine OPK 65 Technical specifications: - tool holder, shaft: 60mm - tool: 175mm - working speed: 5m/min - Engine: 3kw - Dimensions L-W-H: 900x1250x1200mm Gtjdsfig Aiopfx Afnsu - weight: 1080kg - 3 rollers driven - Hardened standard rollers - Hardened and ground tool holder, shaft - Mobile control panel - Horizontal and vertical working position - Side angle guide rollers - Digital displays (2pcs.) - Brake motor - According to CE-Norm

Condition: new, Metallkraft PRM 60 FH Hydraulic Ring Bending Machine Can be used horizontally and vertically for profiles, pipes and solid material. Heavy welded steel construction Horizontal and vertical working possibility Gtjdpjdairtefx Afnju Hydraulic feed of the upper roller Digital display for infeed roller All 3 rolls driven and hardened Lateral straightening rolls, infinitely adjustable Separate control panel with foot control Special accessories: Tube bending rolls Angle bending rolls Special straightening rolls Profile bending rolls Plastic rolls for soft materials TECHNICAL DATA: Length (product) approx. 1000mm width/depth (product) ca. 1400mm height (product) approx. 1650mm Weight (net) approx. 950kg Bending capacity see data sheet Power drive motor 1,5kW Supply voltage 400V Mains frequency 50Hz Shaft diameter top 215mm Shaft diameter bottom 215mm roller diameter top 60mm roller diameter bottom 60mm Speed 4m/min Hydraulic pressure 16t SCOPE OF SUPPLY: Standard bending rolls mobile foot pedal for left-right rotation with emergency stop straightening rolls digital display for infeed roller Hint: Please specify material type to be processed when ordering! NC control Art. No. 3880163: Only possible ex works Optionally the machine can be equipped with bending rolls especially for your needs Also untypical sizes can be made on request

Condition: used, Year of construction: 1973, functionality: fully functional, ARMINIUS profile sanding machine type 171/2, year 1973, with 3 units. All spindles 30 mm diameter. Spindles adjustable in depth and height. 1 spindle 7900 rpm. Accessories: various profile grinding wheels, feed unit with 3 rollers. Sold without warranty. Gtodsxgp E Hepfx Afnju

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Various grinding wheels available, including a diamond wheel. Wheel diameter 150-225 mm, Tool diameter 100-300 mm, Gtedpfjwmy E Hsx Afnju Tool width max. 240 mm, 2 mandrels, diameters 40 mm and 50 mm, Grinding spindle speed continuously variable 1500-3000 rpm, Clearance angle: Radial 10-30 degrees, Axial 0-20 degrees, For swivel heads up to 60 degrees, Coolant tank 50 liters, Very good condition;

Condition: excellent (used), Profile Bending Machine SOCAD type CP 13.8 Outer wing angle capacity: 80x80x8 mm Flat on field capacity: 55 x 30 mm Flat on flat capacity: 75 x 20 mm T capacity: 80 x 80 mm Square capacity: 55 x 55 mm Equippeed with 1 fluted trainer roller Ø 300 x Ht 150 mm + 2 rollers Ø 260 x thickness 110 mm Voltage: 380 V Gtsdpfxoxnnals Afneu Motor power: 8 CV Dimensions (L x W x H): 1800 x 1200 x 1400 mm Weight: 2,5 T

Condition: used, functionality: fully functional, Year of construction: 1993, machine/vehicle number: 4422559493014, Equipment: CE marking, Peddimax 600 Equipment - Flat, profile, and bar steel shear - Notching & punching unit 600 kN - Mechanically adjustable profile and flat steel hold-down device - Quick-change punch system Punching table Godpfjrknnfex Afnstu - Universal punch saddle - Material support table for notching device - Various punches and dies

Condition: excellent (used), Year of construction: 2008, 2 x pneumatic clamps 1 x Saw unit ( 4 Kw ) 1 x moulding, spindle, bottum : 545 x 40mm ( 4 Kw ) 1 x Moulding, spindle, bottum : 545 x 40mm ( 2,2 Kw ) 1 x moulding, spindle, top : 545 x 40mm ( 2,2 Kw ) Maximum moulding tool : Ø 350 mm Lot of tools/heads for window production included. Table dimensions : 500 x 1030mm Total Amp : 30 Gjdpfewz Ei Tjx Afnstu Weight : 1640 Kg Ask for WHATSAPP video presentation ZUANI heads/tools on box included ( 13 Pc. ) + 30 pc. of loose tools/discks, included. Original manual + electric diagram

Condition: good (used), Year of construction: 2011, machine/vehicle number: MS 1153, Offer 23158 Technical data ca : - passage to blasting chamber B 370 x 170 mm - blasting nozzle - Door opening to blasting chamber Gtodjllvr Dspfx Afnsu - Blasting material pressure vessel - blasting material recovery - separate control panel - space requirement blast machine 1600 x 2000 x H 1750 mm - space requirement blasting material container 1200 x 1200 x H 2250 mm - Cartridge filter with suction fan MUNK - SCHMITZ - Air volume 700 - 1500 m³/h - Suction fan 3 kW - space requirement filter unit 1600 x 1600 x H 3250 mm - mot. driven inlet roller table 4 m - roller table without drive 3 m - roller width approx. 800 mm - roller table height approx. 700 mm

Condition: used, Year of construction: 1992, spindle diameter: 50 mm, milling spindle length: 545 mm, Longitudinal profile milling machine with lifting spindle 545mm long, diameter of lifting spindle D=50mm, motor 5.5kW. Gjdpfx Ajua Swwjfnetu Glazing bead saw D=180mm, 2,2kW. Feed rate 2-4-6-12m/min

Condition: as good as new (ex-display), Flat, upright / Ø: 60 x 10 mm / 500 mm Solid, square / Ø: 35 x 35 mm / 900 mm Tube, round / Ø: 70 x 2 mm / 1000 mm Shaft diameter: 50 mm Roll diameter: 138 mm bending speed: 4,5 / 9 m/min voltage: 400 V motor power: 0,6 / 0,9 kW dimensions WxDxH, approx.: 780 x 1040 x 1470 mm Gtsdjpxmaujpfx Afneu Weight, approx.: 360 kg Equipment: - Machine in stable welded steel construction - Roll drive via gearbox - Hardened rolls (standard roll set included) - Shafts hardened and ground - All switching and operating elements on mobile control panel with foot pedal for right/left rotation - Manuel adjustable straightening rolls - Can be used horizontally and vertically Options on request: - Hydraulic top roller infeed - Two-stage motor - Digital display - Brake motor for the production of precision sheets - Roll sets