Used Printer Slotter for sale (2,371)

Condition: used, Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc. External dimensions: 2542 x 1818 x1987 mm (WxDxH) Weight: 2300 kg 2 lasers 400W Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Protective gas possible through 2 connections for external N2 generators (optional) Installation space 250 x 250 x 280 Layer thickness 20-80μm Production speed 2-20cm³ (depending on material and laser power) Operating conditions 15-35 degrees Celsius Laser service life Laser 1: 501 hours Laser 2: 503 hours Other devices: Inox 200 lifting device Weight: 102 Kg Max lifting capacity 135 Kg Ppjdpfx Ameu Ebybsper Protection class IP65 Wet cutter NA 7-11 H CL EU Zone 22 Dimensions 800x480-570x755-850 mm Drive type: alternating current Power 1.25 kw Voltage 230 V 9.2 A Protection class IP65 Frequency 50 Hz Housing: sheet steel Performance 130 m³/h Permanent negative pressure -145 mbar Short-term negative pressure -235 mbar Liquid volume 7 l Water consumption: 0.26 l/h Weight: 50 kg QM powder Automatic Sieving Station Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz Max. current consumption: 3A / phase Inert gas: 5 bar Condition: used / used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), 3D systems Here we offer you a 3D printer. Solid-state Nd: YVO4with triple frequency Wavelength: 354.7nm Nominal power at the laser head: 1450 mW (1000mW at the resin surface under standard conditions) Zaphyr TM coating system: Process: Replaceable coating agent Adjustment: Self-leveling and self-correcting Production layer: Minimum 0.05mm Maximum 0.15mm ProScan™ scanner Edge detection (diameter at 1/e2): Nominal in standard mode 0.13mm Detection of large lines Nominal: 0.76mm Maximum drawing speed Edge detection: 3.5m/sec. Detection of large lines: 25m/sec. Build volume capacity: RDM 750F: 650mm x 750mm x 550mm; 414l Maximum part weight: 75kg Power supply: 200-240VAC (alternating current), 50/60Hz single-phase, 30A Ambient conditions Temperature range: 20-26°C Max. permissible fluctuation: 1°C per hour Relative humidity: 20-50%, non-condensing Space requirement: Ppjdonkalgopfx Ampor Size (WxDxH), unpacked: 1260mm x 2200mm x 2280mm Weight packed (no RDM): 1590kg Type: iPro 8000 Condition: used Scope of delivery: (See pictures) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Desktop Metal 3D Printer Complete System Here we offer you Desktop Metal 3D printer complete system. Desktop Metal 3D printer studio system Complete system: 3D printer + debinding machine + sintering furnace Ppedpok Hz Nqefx Amper Desktop Metal The three-part solution includes 3D printer, debinder and furnace Manufacturer Desktop Metal Model Desktop Metal Studio System Operating condition Used (Good) Year of manufacture 2019 Desktop Metal Studio System Includes: 1.1 Desktop Metal Studio 3D Printer Bound Metal Deposition (BMD) Technology. Features: Printed materials metal Technology FDM Use Industry Other features Office X-stroke 30 cm (12 in) Y-stroke 20 cm (8 in) Z-stroke 20 cm (8 in) Description: Unlike laser-based systems that selectively melt metal powders, the printer extrudes bonded metal rods - similar to an FDM printer. This eliminates the safety requirements often associated with metal 3D printing, and it enables new features such as the use of closed-cell fills for lightweight strengths. 1.2 Desktop Metal Studio debinder (delamination machine) fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (stock) Description: The debinder prepares green parts for sintering by dissolving the primary binder. With a low emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling means no need to refill between cycles. 1.3 Desktop Metal Studio Sintering Furnace hybrid technology (microwaves & conventional heating elements) Installation space 305x205x205mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Features: Function Sinter Configuration Chamber Heat source gas Other features High temperature, automatic Maximum temperature 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles matched to each design and material provide uniform heating and cooling without the residual stresses associated with laser-based systems. Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Here we offer you a 3D-SYSTEMS 3D printer. The ZPrinter ProJet 660 Pro 3D printer has a large installation space. Thus, even large models can be manufactured without prior cutting. Furthermore, the large footprint increases productivity when printing many small models in one print run. 3D color printer with enormous productivity and color fidelity. The ProJet ColorJet color 3D printers from "3D Systems", also known as ZPrinter, work layer-forming according to the ColorJet CJP "Binder Jetting" process, directly in a powder bed. This eliminates the need for dedicated support structures, even for complex and detailed prints with these 3D printers. The unconsolidated powder supports the parts during printing and is then recycled semi-automatically. Areas of application Communication of form and design, installation analysis, initial functional testing, variant testing, form finding, design, development, marketing, sales, master models for thermoforming, dental models, presentation... Best ColorJet 3D color printer in its class for applications with the highest demands, it sets new standards in the field of full color 3D printing systems. Technical data: ZPrinter ProJet 660 Pro 3D Printer Size: 254 x 381 x 203 mm Ppedpfx Amehb Dtpjper Color: 390,000 colors (5 print heads, including black) Resolution: 600 x 540 dpi Minimum detail size: 0.1 mm Automation: Complete (automated set-up and self-monitoring, automated print

Condition: excellent (used), German RepRap 3D Printer Here we offer you a German RepRap 3D printer. The X1000 from German RepRap is a large capacity 3D printer that produces industrial quality objects. 3D Printer Datasheet: German RepRap X1000 Manufacturer: German RepRap Country: n.a. Material: Standards (PLA, ABS, PP ...) Technology: Fusion layering (FDM/FFF) Pre-assembled: n.a. Dimension: 1725 × 1500 × 1320 mm (67.91 × 59.06 × 51.97 in.) Weight: 400 kg / 881.8 lbs Nozzle diameter: 0.4 / 0.6 mm ( in.) Minimum print density: n.a. Print speed 150 mm/s mm/sec Precision XY: XY : 20 µm µm Max. Volume: 1000 × 800 × 600 mm File format: n.a. Software: Simplify3D Connectivity: Wi-Fi OS compatibility: n.a. Power: n.a. Other features: Touchscreen Type: German RepRap X1000 Condition: used / used Pjdjivpdwepfx Ampspr Scope of delivery: (See pictures) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: fe63b5ea, Year of construction: 2022, Markforged Onyx Pro 3D Printer (2022) – incl. accessories – excellent condition For sale is a Markforged Onyx Pro (Desktop Series), delivered in August 2022, in perfect technical condition and with very little usage. The current new price from Markforged is approximately €12,538 including the service package. Here you get a well-maintained device with complete accessories at a significantly reduced price. Technical Specifications - Printing process: FFF with Continuous Fiber Reinforcement (CFF) - Plastic materials: Onyx, PLA - Fiber: Glass fiber (continuous fiber reinforcement) - Layer thicknesses: 0.1 / 0.125 / 0.2 mm - Build volume: 320 × 152 × 154 mm - Eiger software (cloud-based) - Serial number available Ideal for functional components, fixtures, prototypes, and small series production in industrial environments. Scope of Delivery - Markforged Onyx Pro 3D printer - Dry box for material storage - Build platform - Accessory set: - 3× FFF plastic replacement nozzles - 3× CFF fiber replacement nozzles - 2 original sealed filament spools included - Original invoice from Mark3D GmbH - Professional initial installation was carried out by Mark3D Service Status - The original 3-year service plan was valid until 30.08.2025 and is now expired. - There is currently no active service contract. Condition - Very well maintained - Minimal usage - Fully functional Ppodpfx Amoyh Hikspjr Viewing and functional test available by appointment. Asking price €8,490 negotiable (net) Serious basis for negotiation. Significant savings compared to current new price. Other - Sale preferably to commercial buyers - Collection preferred; shipping available by arrangement All information has been provided to the best of our knowledge and belief. Subject to changes, errors, and prior sale.

Condition: excellent (used), Printing and labelling unit Herma GmbH Stuttgart Pedpfxjd N Ip Ho Ampopr Type PAX with integrated printer 230 V, 50 Hz very good condition, directly from the production!! 2 identical printing and labelling units available

Year of construction: 2011, condition: ready for operation (used), An inline SMT stencil printer/solder paste printer is offered. Print area X/Y: 50mm/40.5mm - 510mm/508.5mm, PCB thickness: 0.2mm - 6mm, board weight max.: approx. 1kg, print pressure range: 0 - 20kg, core cycle time: approx. 12s, machine alignment capability: greater 2Cpk at +/-12.5µm 6 Sigma, process/wet print accuracy: greater 2Cpk at +/-25µm 6 Sigma, installation space L/W/H: approx. 2060mm/1500mm/1570mm, machine weight: approx. 800kg. Inspection by arrangement possible. Ppjdpfxsylzhls Ampsr

Condition: ready for operation (used), Mitsubishi K7PRFE Printer Interface Unit, serial no. according to photo, with connection cable, in leatherette bag, used, normal traces of use, 100% functional, scope of delivery according to photos Pjdpfx Aei Eb Nhempjpr

Condition: excellent (used), Stratasys Fortus 450mc Industrial 3D Printer + Krumm Tec CLEAN MATIC 3150 + Transformer – Complete System Description: The Stratasys Fortus 450mc is a high-end industrial 3D printer from the FDM (Fused Deposition Modeling) series. It is used worldwide in prototyping, small-batch production, mechanical engineering, the automotive industry, medical technology, and aerospace. For sale is a complete industrial 3D printing system consisting of: - Stratasys Fortus 450mc (3D Production System) - Krumm Tec CLEAN MATIC 3150 cleaning system for support material - Badger Magnetics 8 kVA transformer (suitable for EU power supply) The system comes from a professional environment and was used for the production of high-quality functional parts and prototypes. Ppedsx D Uqijpfx Ampor Key Features of the Fortus 450mc: - Industrial FDM 3D printer with large build volume: 406 × 355 × 406 mm - Capable of printing high-strength materials such as ABS-M30, PC, ASA, Nylon, ULTEM* - Exceptional dimensional accuracy and repeatability - Network capable, touchscreen interface, user-friendly operation - Ideal for prototyping, small series production, toolmaking, jigs and fixtures (*dependent on material licenses) Technical Data Fortus 450mc: - Voltage: 120/208 V, 3-phase (transformer for EU operation included) - Power consumption: 18 A - Dimensions approx.: 127 × 91 × 196 cm - Software version as per display: 6.2.6624.0 Krumm Tec CLEAN MATIC 3150: - Model: CM 3150 US/PS - 4 kW, 400 V, 50 Hz, 16 A - Ideal for removing SR-30 / SUP706 support material - Weight: 140 kg Total Weight approx.: 600–700 kg Important Note: "The table shown in the photos is not included in the scope of delivery." Scope of Delivery: - Stratasys Fortus 450mc - Krumm Tec CLEAN MATIC 3150 cleaning system - Badger Magnetics 8 kVA transformer (Technical specifications are subject to change and errors excepted!) If you have further questions, we would be happy to answer them by phone.

Condition: used, HR 2K inkjet printer barcode labeling RA2309 Printer manufacturer: REA-JET Printer type HR Operation: Control unit with control panel Print type: Inkjet printer interfaces: Eternet Ppsdpoukxv Nsfx Ampjr Stainless steel control unit in IP65 design Full-color graphic display, diagonal of 14.4 cm (5.7 inches) Graphic user guidance in many languages Support for True Type Fonts (TTF) and Unicode character set Operation: ten-key keypad, cursor block, push and turn operation REA JET HR 2K (with 2 writing heads, up to 25.4 mm writing height) Maximum speed of the system: 762m/min at 60 dpi resolution. 142m/min at 300 dpi. Maximum is 600 dpi. Condition: Worked until dismantling, we have no cartridges available for prior testing. Electrically everything seems to work perfectly (see photos) Abrasion on the rotary encoder (see photo) and USB cover is missing (see foro). Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstraße 11 B & C, 97076 Würzburg, Germany

Condition: excellent (used), Offer for flexo printing machine W&H SOLOFLEX, 8 colors, year 1998, 620 mm width, can be seen in operation in excellent condition Psdpoygg Uyefx Ampepr

Year of construction: 2017, condition: good (used), Ready for worldwide shipping! 50+ pieces in stock Xerox Color C60 / C70! - Professional color production printer - Up to 300gsm coated/uncoated - Print resolution: 2400 x 2400 dpi - Scan resolution: 600 x 600 dpi Psdpfspq Nzdox Ampopr - Up to 300,000 prints per month

Year of construction: 2022, operating hours: 320 h, condition: as good as new (ex-display), functionality: fully functional, working width: 2,100 mm, type of cooling: water, working length: 6,000 mm, machine/vehicle number: Serien Nr.000025, World first: Meltio has reinvented 3D laser printing with this machine. With this unit, you can use welding wire and the corresponding 3D data to produce any conceivable component made from metallic materials. (see photos) We are a specialist dealer for welding technology and operate an application center for laser welding technology. The machine offered is located in this application center. Meltio Engine – 1.2 kW laser power, 976 nm wavelength, multiple 200W direct diode lasers – power supply 400V with 2-5kW. Equipped with active water cooling. For wire diameters 0.8-1.2 mm. Advanced control module for equipping existing robotic systems with Meltio technology. 390x660x1000 mm – 90 kg. Transform any motion platform into a metal 3D printing system, subject to size restrictions. Meltio Engine Dual Wire – dual-wire welding system for different materials in the welding head. Ppodpfeyk D T Uox Ampsr Meltio Engine Hot Wire – inductive wire preheating. Meltio powder feeder, 2x with USB connection. Can be used individually. Enables users to calibrate the Meltio multi-laser deposition head precisely and effortlessly before each print. KUKA KR30 with 2100 mm reach, 6-axis robot including KRC4 controller and robot control panel – rated payload: 30 kg KUKA DKP400 turn-tilt table – load capacity 400 kg 3 m linear axis for the robot (can also be omitted) The area must be designed to be laser-safe; partitioning or construction works are not included in this offer. No manufacturer’s warranty; the system will be delivered in working condition, spare parts availability is guaranteed. The complete systems are CE certified.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: K00219, overall weight: 601 kg, construction height: 406 mm, construction width: 355 mm, Submitting a bid obligates the bidder to collect the item by 14.01.2026! TECHNICAL DETAILS Build volume: 406 mm x 355 mm x 406 mm Layer thicknesses: 0.127 mm, 0.178 mm, 0.254 mm, 0.330 mm Volume cassettes for build and support material: 1,510 cm³ / 3,020 cm³ Achievable accuracy: ± 0.127 mm or ± 0.0015 mm/mm Z accuracy: −0.000 / +layer height MACHINE DETAILS System dimensions: 1,295 mm x 902 mm x 1,984 mm Weight: 601 kg Input voltage: 420 V Supply voltage: 208 V AC Phases: 3 Frequency: 50/60 Hz Current consumption: 18 A Network connection: 10/100 Base-T Protocol: Ethernet Standards: CE, cTUVus, RCM, EAC, FCC Part B EQUIPMENT Insight™ Software Ppjdox Hwgnepfx Amper Control Center™ Software GrabCAD Print compatibility SCA 1200HT support material cleaner Compatible with iSQUARED materials: ABS, ABS-ESD, ABS-CF, ASA, PC-ABS, PC, ULTEM 9085, ULTEM 1010 Note: One of four cassettes requires servicing.

Condition: used, We offer for sale a used Ghelco VALJET 1600 digital inkjet printer. This printer is designed for printing on flat surfaces such as glass, metal, wood, and plastic. Maximum print width is 1.6 m. Maximum print resolution is 1440 dpi. Ppedpfx Amoywlaqjpsr If you have any questions or require additional information, please send a message or contact us by phone.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, The Massivit 5000 3D printer enables ultra-fast custom manufacturing for both the visual communication market and industrial sectors such as the automotive, aerospace, railway, and marine industries. Ppjdpfx Aoxwpvgjmper Equipped with a dual-material system and two printheads, the M5000 allows you not only to print two different objects but also to print with two different materials simultaneously. The extraordinary build volume of 145 x 111 x 180 cm enables the production of full-scale parts in no time. Large, complex forms are no challenge for this machine. Furthermore, a variety of materials is available for the machine.

Condition: good (used), At least 10 Sato SP40 label printers - 203 dpi, thermal printing, USB, fast, compact - used - : Price per unit from location: only €159 (net)! Manufacturer: Sato Type: SP40 Year of manufacture: unknown Print technology: thermal printing (direct) Ppjdpfx Amsvx E R Hepjr Print resolution: 203 dpi, for razor-sharp and easy-to-read labels Maximum print width: 104 mm, perfect for common label formats Maximum print speed: Up to 152 mm per second for fast print jobs Media: Suitable for labels, tags and paper rolls with a width of 25 to 110 mm User-friendly: Easy operation thanks to a clear LCD display and simple button control Compatibility: Supports common label software and a variety of barcodes such as Code 128, EAN, UPC and many more Connections: USB, serial (RS-232) and optional LAN - flexible in integration into your existing system Compact and robust: The space-saving design ensures a long service life and fits into any work environment The Sato SP40 label printer is the perfect choice for anyone looking for a reliable and easy-to-use printer for labels and search for barcodes. With its compact design, it fits into almost any office or work environment and offers fast and precise printing performance. Ideal for small and medium-sized businesses, it helps you efficiently create labels for products, shipping or warehouse management. Condition: good Available: immediately Location: Braunschweig

Condition: good (used), approx. 7 pieces Sato printer CG408DT-LAN thermal printer with LAN connection | label printer - used - : Price per piece from location: only €85 (net)! Psdpfx Amevx E Raepepr Manufacturer: Toshiba Type: CG408DT-LAN Year of manufacture: unknown Sato printer CG408DT-LAN - label printer with LAN connection Sato printer CG408DT-LAN, a reliable thermal printer for professional labeling in various areas of application such as warehouse, logistics or office. The LAN connection means the printer can be easily integrated into the network, which ensures flexible use. Product details: • Model: Sato CG408DT-LAN • Print technology: Thermal printing (direct thermal printing) • Print resolution: 203 dpi • Print speed: Up to 152 mm/s • Media width: 25 mm to 112 mm • Connection: LAN connection (network capable) • Areas of application: Label printing for logistics, shipping, warehouse, retail The printer is in perfect condition and offers high print quality with fast turnaround times. Ideal for a variety of label formats. Condition: good Available: immediately Location: Braunschweig

Year of construction: 2017, condition: ready for operation (used), Resolution X/Y/Z: 600dpi/600dpi/1600dpi, max. build dimensions X/Y/Z: 342mm/342mm/200mm, max. materials per component: 82, min. layer thickness: 16µm. Machine dimensions X/Y/Z: approx. 1400mm/1300mm/1100mm, weight: approx. 450kg. Documentation available. On-site inspection is possible. Ppedpfx Asx H S N Rompjr

Year of construction: 2000, condition: used, Max. speed: 11.000 cycles/h, web width: 130-265mm, max. print width: 254mm, format length: 101.6-254mm, max. processing width: 254mm, paper strength: 100-180g/m², max. cardboard strength: 300g/m², length: 10,509mm, height: 2806mm, weight: 9.5t. Ppjdpfxjdv Nigj Ampjr

Condition: ready for operation (used), Year of construction: 2017, An Agfa UV-LED hybrid large format printer including a roll-to-roll unit is available. Printing technology: UN-LED inkjet, max. print width: 2540mm, resolution: 1200dpi, print colors: CMYKLcLm+white+primer, max. print speed: 275m²/h, substrate type: rigid/flexible, max. substrate thickness: 50mm. Documentation available. On-site inspection is possible. Pjdpfx Amsww Iu Rspspr

Condition: ready for operation (used), Two identical Videojet printers are available. One has only been tested for a few cycles, the other is still in its original packaging. Print heads: 1, max. number of print lines: 5, max. print speed: 278m/min, text storage capacity: 250, max. marking lines: 5, documentation available. On-site inspection is possible. Ppodpfx Ameu N Hdyopor

Year of construction: 2007, condition: ready for operation (used), A 3D metal printing machine Concept Laser GmbH in need of repair is available. Technology: Laser melting (SLM)/LaserCusing, working dimensions X/Y/Z: 250mm/250mm/280mm, layer thickness range: 20µm-80µm, max. scanning speed: 6m/s, focus diameter range: 50µm-500µm, laser power: 200W, printing materials: stainless steel/aluminum/titanium/nickel-based alloys/cobalt-chrome. Machine dimensions X/Y/Z: approx. 2450mm/2400mm/1650mm, weight: approx. 2000kg, laser cabinet dimensions X/Y/Z: approx. 600mm/1200mm/1200mm, weight: approx. 180kg, blower dimensions X/Y/Z: approx. 550mm/1450mm/550mm, weight: approx. 70kg. Including various printing materials such as titanium plates, steel plates and aluminum alloys. The machine has CF card defects and the communication between laser GUI and RCU breaks down. Documentation available. On-site inspection is possible. Pedpfxsww Ivne Ampjpr

Condition: excellent (used), Extruder for 3D Printing Filament Production – 25/25 L/D Podpfx Amjxwvqqopopr We offer a high-quality extruder for the production of 3D printing filament. The system is designed for continuous industrial operation and is characterized by its robust construction, precise temperature control, and excellent material homogenization. Ideal for manufacturers, material developers, and research institutes. Technical Equipment & Features • Extruder 25/25 L/D – efficiently designed screw geometry for uniform melt quality • High-performance melting zone – precise temperature regulation for consistent filament quality • Die for 3D filament extrusion – suitable for all standard filament diameters • Cooling bath – stable filament take-off and optimized cooling section • Haul-off unit – finely adjustable pulling speed for exact diameter stability • Winding and spooling device – automatic filament winding • Optimally suited for PLA, PETG, ABS, TPU, and many technical materials