Used Pressure Cooker for sale (15,115)

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: B5.00172.1454, total width: 850 mm, total length: 2,000 mm, total height: 1,450 mm, pressure: 340 bar, operating pressure: 340 bar, type of input current: three-phase, overall weight: 1,700 kg, rotational speed (max.): 1,500 rpm, empty load weight: 1,700 kg, power: 147 kW (199.86 HP), year of last overhaul: 2026, pump capacity: 239 l/min, Equipment: type plate available, Stationary high-pressure pump unit Hammelmann HDP 172 mounted on a base frame. Similar, but not Kamat, Uraca, or Woma. Pump type: HDP 172 Operating pressure: 340 bar Flow rate: 239 l/min Drive speed: 1500 rpm Drive power: 147 kW Hsdpeyablmofx Aa Ieu with SIEMENS 160 kW 3-phase motor, IP55 Dimensions (LxWxH): approx. 2000x850x1450 mm Weight: approx. 1700 kg Year of manufacture: 2015 Condition: New piston seals installed and valves inspected in January 2026. In very good used condition.

Condition: used, Year of construction: 2021, operating hours: 1,231 h, functionality: fully functional, total width: 720 mm, total length: 950 mm, total height: 800 mm, pressure: 500 bar, operating pressure: 450 bar, type of input current: three-phase, overall weight: 175 kg, high-pressure hose length: 20,000 mm, volume flow: 0.96 m³/h, empty load weight: 175 kg, input voltage: 400 V, hose length: 20,000 mm, High-pressure washer/sandblaster DENJET CE 20 COMPACT 500 - Pressure: 500 bar - Flow rate: 16 l/min - Power supply: 15 kW - Voltage: 400 V - Current: 28 A - 20 m wear-resistant high-pressure hose with ½” BSPP female swivel couplings (extension hose). - 15 m oil-resistant 4-core electric cable. - Dry shut-off trigger gun with 0.85 m stainless steel lance. - Straight jet nozzle - CEE electric plug. Hsdpfx Ajyak Tyea Ieu - Rotating nozzle. - Sandblasting kit with boron carbide nozzle. - Mobile abrasive container. - Personal protective equipment: helmet with eye protection, waterproof coverall, protective apron rated for up to 1000 bar, protective boots size 43.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 1,651 h, functionality: fully functional, machine/vehicle number: G393, operating pressure: 500 bar, total length: 1,175 mm, total height: 945 mm, total width: 760 mm, pressure: 500 bar, type of input current: three-phase, empty load weight: 290 kg, input voltage: 400 V, power: 15 kW (20.39 HP), input current: 32 A, noise level: 78 dB, pressure (max.): 500 bar, input frequency: 50 Hz, water pressure: 500 bar, Dear Sir or Madam, For sale is an overhauled Falch WheelJet 15 Electric without accessories. 500 bar 15 l/min 32A plug Hsdpfx Aajxugifo Iju Best regards, STS-Reinigungstechnik Team

Condition: used, This listing is for the Spectrum Labs Krosflo Research 11 TFF System Hedpsxv Axxjfx Aa Iou The unit is in full working condition and is ready for immediate use The KrosFlo® Research II TFF System by Spectrum Laboratories is a laboratory-scale filtration system designed for microfiltration and ultrafiltration applications. It is particularly suited for research and development processes involving volumes ranging from 2 mL to 15 L. The system is ideal for biotechnology, pharmaceuticals, and academic research laboratories where precise and controlled filtration processes are required.

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 207646, high-pressure hose length: 10,000 mm, pressure: 150 bar, input voltage: 230 V, The Kärcher HD 5/15 C Plus cold water high-pressure cleaner is a display unit in near-new condition. The compact, lightweight, and versatile HD 5/15 C Plus cold water high-pressure cleaner stands out with excellent mobility and is suitable for both upright and horizontal operation. The unit features ingenious accessory storage, and its brass cylinder head and automatic pressure relief ensure a long service life. At the same time, it impresses with innovative new developments that sustainably increase user comfort by allowing fatigue-free operation and quick setup and packing. The EASY!Force high-pressure gun makes use of the recoil force from the high-pressure jet to reduce holding force to zero, while the EASY!Lock quick-release fasteners provide handling up to five times faster compared to conventional screw connections, without compromising robustness and durability. Overall, a well-designed package that ensures outstanding cleaning results with high convenience and long service life. Hjdpfx Asyzni Nea Ieu Technical data: Voltage: 230V Connection power: 2.8 kW Working pressure: 150 bar Power cable: 5 meters

Condition: good (used), Year of construction: 2016, operating hours: 1,300 h, functionality: fully functional, operating pressure: 500 bar, empty load weight: 1,420 kg, fuel: diesel, power: 34.5 kW (46.91 HP), temperature: 95 °C, volume flow: 1,800 m³/h, Equipment: chassis, Dynajet 500 TH hot water system - Very good condition Hedpfx Asv S H Uasa Iou 500 bar / 30 l/min 34.5 kW

Condition: used, Year of construction: 1992, machine/vehicle number: 77K2, KSP11 SACMA double-pressure press, without thread roller, used, very good condition Hjdswiwqfepfx Aa Ieu

Condition: used, Mixing Tank, Pressure Vessel, Used Machine Manufacturer: Robert Hinkel & Co Model: 9601 Hedexacl Tjpfx Aa Iou Volume: 200 L Operating Pressure: 3 bar Electrical Data: 380V; 2.0A; 0.75 kW Overall Dimensions: Ø 850 mm, height 1780 mm Design: Cylindrical tank with shallow-dished top and bottom, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable, secured with a flanged bolted connection. The lid includes a cleaning/inspection opening. Material: Carbon steel with painted surface

Condition: new, operating pressure: 160 bar, high-pressure hose length: 15,000 mm, input voltage: 400 V, overall weight: 111 kg, warranty duration: 24 months, TECHNICAL DATA OF THE KARCHER HDS 7/16 CXA WASHER: Model: HDS 7/16 CXA Hjdpfx Aasv Tmx Io Iju Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 310 - 660 Working pressure (bar/MPa): 30 - 160 Maximum pressure (bar/MPa): 160 Maximum water temperature (°C): 80 Connection power (kW): 4.4 Power cable (m): 5 Fuel tank (l): 15 Weight (kg): 126 Dimensions (length x width x height) (mm): 1260 x 650 x 920 EQUIPMENT OF THE KARCHER HDS 7/16 CXA WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional - Ultra Guard HD 15M series, DN6, 250BAR - !EasyLock Automatic high-pressure hose reel: Professional, originally integrated reel with a capacity of 15m - automatic winding. Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Karcher Professional POWER pressure nozzle !EasyLock RELIABLE | DURABLE | ERGONOMIC Automatic hose reel ensures safe operation and convenient storage of the 15-meter Ultra Guard high-pressure hose with Teflon® coating eco!efficiency mode - economical and environmentally friendly, even during longer periods of use - Reduces fuel consumption and CO₂ emissions by 20%. Easily accessible water filter protects the pump from impurities in the water. SDS reduces pressure pulsations in the high-pressure system of the device and thus extends the life of all pump components on the high-pressure side. Built-in funnel for filling the cleaning agent prevents accidental spillage of chemicals. EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows 5x faster equipment changes than a traditional thread system. The device is completely new and factory-packed

Condition: new, operating pressure: 150 bar, high-pressure hose length: 10,000 mm, input voltage: 230 V, overall weight: 101 kg, warranty duration: 12 months, temperature: 80 °C, TECHNICAL DATA OF THE KARCHER HDS 6/15 C WASHER: Model: HDS 6/15 C Manufacturer: KARCHER Country of production: Germany Series: Professional Condition: NEW Thread type: KARCHER !EasyLock series Power supply (~/V/Hz): 1 / 230 / 50 Pumping capacity (l/h): 260 - 560 Hodpfxsv Tng Hs Aa Iou Working pressure (bar/MPa): 30 - 150 Maximum pressure (bar/MPa): 160 Maximum water temperature (°C): 80 Connection power (kW): 3.4 Power cable (m): 5 Fuel tank (l): 15 Weight (kg): 101 Dimensions (length x width x height) (mm): 1066 x 650 x 920 EQUIPMENT OF THE KARCHER HDS 6/15 C WASHER: Pressure gun: Karcher Professional !EasyForce Advanced High-pressure hose: Karcher Professional 10M !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Karcher Professional POWER pressure nozzle !EasyLock RELIABLE | DURABLE | ERGONOMIC eco!efficiency mode - economical and environmentally friendly, even during longer periods of use - Reduces fuel consumption and CO₂ emissions by 20%. Easily accessible water filter protects the pump from impurities in the water. Safety valves, protecting against lack of water and fuel Water softening system to protect the heating coil from scale deposits. SDS reduces pressure pulsations in the high-pressure system of the device and thus extends the service life of all pump components on the high-pressure side. Practical handles on the housing + integrated nozzle storage A built-in funnel for filling the cleaning agent prevents accidental spillage of chemicals. EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has the EASY!Lock equipment mounting system that allows 5x faster equipment changes than a traditional thread system. The device is completely new and factory-packed

Condition: used, Year of construction: 2006, Item: AV-12167-AV2168-50m3 Pressure Tank Capacity: 49,900 L Exterior Dimensions: Diameter Ø 3500/3550 mm, Total Height 6200 mm. Used, vertical, identical stainless steel pressure tanks – 2 pcs. Insulated with Armaflex. Ø 600 mm manhole located in the lower part of the cylinder. Year of manufacture: 2006 Test Pressure: 2.86 bar Material: AISI 304 Vertical Stainless Steel Pressure Tank – 49,900 L (TÄNKKI, Finland) High-quality vertical pressure vessel manufactured by TÄNKKI Oy, Ähtäri, Finland. Constructed in accordance with EN 13445-3 and CE certified (Notified Body 0875) for use with non-hazardous liquids (Group 2). Hodpfx Asv Tnqlsa Ieu Technical Specifications Manufacturer: TÄNKKI Oy, Ähtäri, Finland Year of manufacture: 2006 Serial number: 2344/06 Volume: 49,900 liters (≈ 49.9 m³) Design pressure: 2.0 bar(g) Test pressure: 2.86 bar(g) Temperature range: 0 °C to +50 °C Design standard: EN 13445-3 (PED compliant) Media group: 2 (non-hazardous liquids) Orientation: Vertical, self-supporting construction Description This vertical stainless steel pressure tank is engineered for low-pressure storage and processing applications, making it ideal for water, milk, whey, or other food and process liquids. The tank is constructed from premium-grade stainless steel, guaranteeing long service life, durability, and full compliance with EU PED regulations.

Condition: used, Year of construction: 2011, Manufacturer: PCM Delasco Model: 2Z3 Hjdpex R Dzgjfx Aa Isu Type: Low-pressure peristaltic pump / Paste pump Year: 2011 Density: 1.8 max Cycle: 165 cm Max speed: 56 rpm Max pressure: 1.5 bar Max flow rate: Approx. 9 liters max (calculated estimate) Self-priming Max viscosity: 15,000 cP

Condition: used, Year of construction: 1991, Vertical 6 bar stainless steel pressure tank with dished ends and various fittings and equipment. Additional title: vertical stainless steel tank Volume: 10560 l Hodpfx Aaoxlpgno Isu Max. pressure: 6 bar test pressure 7,8 bar Max. temp.: 10 °C Length: 1900 mm Width: 1900 mm Height: 4770 mm Material: stainless steel 1.4301 (AISI 304) Base construction: vertical tank with dished bottom and pipe feet Features: Shell-manhole, level-display-hose, tank fittings: sampler, spray ball, bunging device, pressure gauge, safety valve, vacuum flap

Condition: new, functionality: fully functional, operating pressure: 200 bar, high-pressure hose length: 10,000 mm, empty load weight: 43 kg, fuel: super 95, warranty duration: 24 months, Technical specifications: Pump capacity (l/h) 700 Operating pressure (bar) 200 Maximum pressure (bar) 250 Water connection R 3/4″ Drive type: Gasoline Engine type: G210FA High mobility Color: Anthracite Weight with accessories (kg) 43 Dimensions (L x W x H) (mm) 878 x 538 x 702 Scope of delivery: Kärcher Classic spray gun - M22 thread High-pressure hose: 10m Kärcher Classic lance 850mm Power nozzle 25° Water filter Equipment: Protective frame Crankshaft pump with ceramic piston Independence: Independence from external power sources. Complies with EU Stage V emissions standards. Convenient manual start. Hodpfx Ajw Exv Ija Isu High mobility: Large inflatable wheels for comfortable operation on difficult terrain. The compact and small device is very easy to maneuver even in tight spaces. Fits in a car. Solid and durable device: The sturdy tubular construction protects the pump from damage. A thermal valve protects the pump from overheating during circulation mode. A crankshaft pump with ceramic pistons. The compact Kärcher HD 7/20 G Classic high-pressure cleaner without water heating is the ideal choice for beginners using gasoline-powered devices. The device can be easily transported in a car and enables the successful completion of even the most demanding cleaning tasks, for example, on a construction site or in municipal areas. The device offers a working pressure of up to 200 bar and is equipped with a durable crankshaft pump and a pumping capacity of 700 liters per hour. An integrated gasoline engine (EU STAGE V), which allows the device to operate independently of external power sources, inflatable wheels that ensure the necessary mobility on site, an ergonomic handle for easy transport, and practical storage space for accessories ensure user-friendly operation. Important parts are easily accessible for maintenance and effectively protected by thermostatic and safety valves. The HD 7/20 G Classic's sturdy steel frame also prevents external and mechanical damage. The unit does not have the ability to draw water from alternative sources.

Condition: new, Year of construction: 2025, functionality: fully functional, operating pressure: 230 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, warranty duration: 24 months, SPECIFICATION: Model: KPC-7.5TP Voltage/Hz: 400/50 Max Pressure (Bar): 230 Flow Rate (L/h): 1080 Power (W): 10,000 Motor: Induction RPM: 1450 Hodpew Icn Sofx Aa Iju PREMIUM CRANKSHAFT PUMP BRASS HEAD WITH FLANGED BYPASS VALVE CERAMIC PISTONS, 18 mm DIAMETER STAINLESS STEEL SUCTION AND DELIVERY VALVES THREE-PHASE INDUCTION MOTOR WITH THERMAL PROTECTION AND COPPER WINDINGS PROFESSIONAL ACCESSORIES INCLUDING 4 NOZZLES WITH DIFFERENT SPRAY ANGLES FOR ALL TYPES OF SURFACE AND CONTAMINANT EQUIPPED WITH A PRACTICAL ACCESSORY HOLDER AND A PROFESSIONAL, BRAIDED HIGH-PRESSURE HOSE Crankshaft pump with ceramic pistons – uncompromising quality: - This pump type represents the top tier among pressure washers – ensuring reliability, precise operation, and long service life. - Ceramic pistons are highly resistant to wear, significantly extending maintenance intervals. - Ideal for continuous use – with no performance loss, even after many hours of daily operation. Low-speed motor – built for extreme workloads: - Operates at 1,450 rpm, minimizing mechanical wear. - Powerful, efficient, and properly cooled for demanding, all-day applications.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK 2000-Litre Pressure Tank – English Translation The CORMAK pressure tank with a capacity of 2,000 litres and a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as an element for stabilizing the compressor's operating parameters. Key Advantages of the 2,000 L Pressure Tank Professional pressure-vessel construction – made of high-grade 5 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High capacity – 2,000 litres – provides a stable supply of compressed air and reduces the frequency of compressor start-up cycles. Multi-connection system – equipped with 5 connections in 2" and 1/2" sizes, allowing flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – the vertical construction helps save valuable space in industrial facilities. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 5 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE marking and the identification number of the UDT notified body, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure-vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 2,000-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of compressed-air-powered equipment and significantly extends the compressor's service life by reducing the number of start-up and shutdown cycles. The vertical design allows for compact installation, which is particularly important in facilities where space is limited. Standard Equipment Connection ports: 5 pcs. – sizes 2" and 1/2" Nameplate with CE marking UDT notified body identification number Complete technical documentation and pressure-vessel passport External anti-corrosion coating Technical Specifications Parameter Specification Weight (kg) 360 Number of connections 5 Connection size 2", 1/2" Hjdszznuvopfx Aa Isu Dimensions 289 × 101 cm Tank capacity (L) 2,000 Working pressure (bar) 11 Wall thickness (mm) 5 Diameter (mm) Ø 1,010 Height (mm) 2,890

Condition: used, Year of construction: 2011, Used 2011 Hardinge Bridgeport XR760. Supplied with Heidenhain iTNC 530 Control, 12,000 RPM Spindle with Through Spindle Coolant, 30 Station ATC, Renishaw spindle and table probing, Swarf Conveyor, Coolant Equipment & Manual Set. SPECIFICATION: TRAVELS: X Axis 760 mm, Y Axis 610 mm, Z Axis 610 mm Hjdpszzairsfx Aa Ieu Spindle Gauge Plane to Table (~ max) 710 mm, Spindle Gauge Plane to Table (~ min) 100 mm TABLE: Length 1000 mm, Width 600 mm T-Slot Width 18 mm, T-Slot Centre Distance 100 mm, Number of Std T-Slots 5, Max Weight on Table (evenly distributed) 900 kg SPINDLE: Max Rating 25 kW (S6 40%), Max Speed 12,000 rpm, Max Torque 159.2 Nm, Taper BT 40 Through Spindle Coolant, Coolant Flow Rate at Cutter 160 L/min, Through Spindle Coolant Pressure 20 bar (Std) FEEDRATES: Rapid and Jog (Max.) 20 m/min Cutting Feed Rate (Max.) 20 m/min BALL SCREWS: X & Y Axis 45 x 16 mm Z Axis 45 x 12 mm TOOL CHANGER: Type Rapid ATC, Capacity 30 Max Tool Diameter 125 mm (adjacent pocket), 80 mm Tool Length Max. 300 mm Tool Weight Max. 7 kg COOLANT & CHIP MANAGEMENT: Swarf Conveyor, Coolant Capacity 355 L Wash Down Standard, Wash Gun Standard, Cutter Air Blaster Standard Washdown Flow Rate 140 L/min ACCURACY – ISO 230-2: Positioning Accuracy 0.010 mm Repeatability 0.004 mm GENERALS: Machine Dimensions (W x D) 2528 x 3000 mm Air Required 4.9 cfm Power Supply 25 kVA / 415 V / 3 Phase / 50 or 60 Hz Control: Heidenhain iTNC 530 Spec: X760 Y610 Z610 mm | 12000RPM | BT40 Accessories: Renishaw Probing, Through spindle coolant, 30 Position Side mount tool changer, Swarf conveyor, Chilled 12000RPM Spindle

Condition: good (used), pressure monitor, pressure switch, pressure regulator, gas pressure regulator, dial air regulator -Manufacturer: Wilkerson, pressure regulator Dial-Air-Regulator -Type: R21-C4-L00 B -Control range: 0-3 bar / 0-40 psi -Inlet pressure: max. 21 bar / 300 psi -Dimensions: 81/68/H103 mm Hsdovy Enuepfx Aa Iju -Weight: 0.9 kg

Condition: used, With this offer, you are purchasing a used flow cytometer ‘Beckman Coulter DxFLEX System B5-R0-V0’. Item for sale: 1 x Beckman Coulter DxFLEX System B5-R0-V0 with the following equipment: Manufacturer tested Includes laptop for use Condition: Hsdpfx Aasxl Tv He Ieu This offer is for a used device, which may show signs of wear. The device has been tested for functionality. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us personally.

Condition: used, Year of construction: 1998, operating pressure: 100 bar, overall weight: 590 kg, rotational speed (max.): 600 rpm, power: 30 kW (40.79 HP), URACA high-pressure pump unit Type: RS606E/100 Hodpfx Asv Hqpqea Ieu URACA 3-plunger pump KD606 Flow rate: 138 l/min with 30 kW electric motor

Condition: used, Year of construction: 2006, Masterfill Filling Machine S 500 The Masterfill S 500 is a high-performance, precision filling machine designed to meet the demanding requirements of modern dairy and food production facilities. Built for reliability, efficiency, and hygiene, the S 500 delivers consistent filling accuracy across a wide range of liquid and semi-liquid products. Engineered with advanced control systems, the S 500 ensures smooth operation and minimal product waste, making it ideal for filling milk, yogurt, cream, sauces, and other viscous products. Its robust stainless-steel construction guarantees durability while complying with strict food safety and hygiene standards. The machine features user-friendly controls, allowing operators to easily adjust filling volumes and production speeds to suit different product types and packaging formats. With its compact footprint and efficient design, the Masterfill S 500 integrates seamlessly into existing production lines. Key Features - High-precision volumetric filling system - Suitable for liquid and semi-viscous products - Hygienic stainless-steel construction - Easy-to-use control interface - Adjustable filling speed and volume - Low maintenance and easy cleaning - Compact and space-efficient design Applications - Milk and dairy products - Yogurt and desserts - Cream and sauces - Beverage and liquid food products Materfill S500 6 head fill while rise filler M2-AF Serial number 4716 YOM 2006 Filling capacity 2ml to 2000 ml The filler is a 6 head automatic filler, with the capacity to store 50 separate preset menus, Brief FDS • Controlled by Siemens S7 PLC via Mitsubishi Beijer HMI • Jars feed in vis constant stainless steel slat band • Jars indexed via program-controlled infeed and outfeed pneumatic gates. • Jars filled via positive pressure within 50 ltr holding tank (this could be changed easily to a constant positive pressure into manifold via modulating pump) • Volume controlled via Nixon BNO turbine flow meters communications with siemens high speed counter. • Liquid feeds into jar with rise during fill or above jar for fill time • Full SIP, CIP, and flush capability programs available Dico CapperSerial number 3/379Brief FDS  Capper with rotating starwheel  Will cap Square of round Jar/ Bottles (change parts included)  Jar enters, signals PEC starwheel turns 90⁰ under capping head  Capping lowers on cam, retracts on cam  Jar/ bottle clamp activated of adjustable cam onto 5/2 valve  Starwheel turns 90⁰ onto exit conveyor  Current capping head removable, for 40mm cap (no alternative head)  All systems work on cams and relays, no PLC  Motor runs on DOL for capping (clutch adjusted and variable speed gearbox)  Cam motor uses inverter. Guards with interlocked access doorway Required services.  3 Phase 32-amp electrical supply  7 Bar air pressure Main control panel Cap sorter and feederRNASRC-N 400-2LSerial no 00801Brief FDS  40mm cap sorter and feeder  Vibrating bowl agitates caps upwards  Air jets and cut outs sort caps placing in correct orientation  Cap chute allows smooth passage to dispensing head with some adjustment  Cap dispenser works on bottle/jar passing under and catching cap, this allows the retaining jaws to open and release cap  Side or over independent speed controlled wheel assists in cap leveling Required services.  240V electrical supply Hedpfxoywuczo Aa Iou  3 Bar air pressure Filling volume: 25-2000 ml Controls: SIEMENS S7 via Mitsubishi H...

Condition: like new (used), Set of 3 Industrial Vacuum Cookers – Stainless Steel Set of 3 industrial vacuum cookers made of stainless steel, designed for cooking, heating, and processing food products under controlled vacuum conditions. The set consists of three process vessels installed on a common frame with an elevated work platform, providing a robust solution for industrial batch production. Vacuum processing allows for cooking and concentration operations at reduced pressure, enabling operation at temperatures lower than those used in conventional atmospheric processes, depending on the product and recipe. MAIN FEATURES -Quantity: 3 vacuum cookers -Type: Industrial vacuum cooking/processing system -Application: Cooking, heating, and processing of food -Robust construction in stainless steel -3 independent process vessels -Configuration for batch production -Integrated piping and valve system -Vacuum processing -Bottom product discharge -Individual drive systems -Inspection/access hatches -Stainless steel work platform -Guardrails and access system -Designed for professional food processing environments Hedpfx Ajzwv Ipea Isu -Integrable into complete production lines APPLICATION The system is designed to process food products in closed vessels under vacuum conditions. Working at reduced pressure allows the cooking and heat treatment conditions to be adapted to the characteristics of each product. The configuration of three vessels also provides high flexibility for managing different batches or production stages within the same facility. Depending on the product, it can be used for: Vacuum cooking Heating and heat treatment Concentration Mixing and homogenization Reduction of liquid products Sauce production Processing of fruits and vegetables Preparation of fillings and formulated products APPLICATIONS Especially suitable for food manufacturers, sauce and condiment producers, fruit and vegetable processors, prepared meal manufacturers, and industrial kitchens. Depending on its configuration, it can be used to produce sauces, jams, preserves, fruit preparations, vegetable products, fillings, concentrates, and prepared meals. The configuration of 3 industrial vacuum cookers offers a particularly interesting solution for facilities that require production flexibility and simultaneous processing of different batches. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Industrial Linear Cooker – Stainless Steel Industrial linear cooker made of stainless steel, designed for the continuous cooking and heat treatment of food products within industrial processing lines. The equipment allows for continuous and controlled heat treatment while the product moves through the processing zone, facilitating uniform production and integration with the different stages of an automated line. Its stainless steel construction, continuous transport system, and industrial design make it particularly suitable for processing plants for vegetables, fruits, and other food products. MAIN FEATURES -Type: Industrial linear cooker -Application: continuous cooking/heat treatment -Continuous processing system -Automatic product transport -Stainless steel construction -Product feeding zone -Heat treatment section -Continuous discharge -Motorized transport system -Integrated control panel Hodpfxjzxcazj Aa Ieu -Hygienic design for the food industry -Robust construction for industrial use -Integrable into existing processing lines -Designed for continuous operation PROCESS The linear cooker is designed to perform continuous heat treatment of the product, eliminating the need to work in batch processes. The product is introduced into the equipment and advances in a controlled manner through the cooking zone, remaining for the established time to receive the required heat treatment. Subsequently, it is continuously discharged to the next stage of the process. It can be integrated with: Feeding systems Washers Peelers and cutters Conveyors and elevators Scalders Cooling systems Inspection belts Freezing equipment Fillers and packers Complete processing lines APPLICATIONS Particularly suitable for the fruit and vegetable processing industry, canning companies, frozen food manufacturers, and prepared food plants that require a continuous cooking or heat treatment system. Depending on its configuration and process conditions, it can be used for vegetables, legumes, fruits, and other food products that require a cooking or heat treatment stage before subsequent cooling, freezing, preservation, or packaging. Its continuous linear processing and stainless steel construction provide a robust solution for automated industrial lines for heat treatment. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: excellent (used), Continuous Sterilizer / Cooker-Cooler FMC-JBT STERILMATIC – 1 kg Format Continuous sterilizer FMC-JBT STERILMATIC (Cooker-Cooler), designed for the continuous thermal treatment of packaged food products, automating the sterilization and cooling stages within a high-production industrial line. This type of system is especially designed for canning plants that need to replace batch processing with a continuous flow of packages, allowing for the constant input of product, its thermal treatment for a controlled time, and subsequent cooling before continuing to the next stages of the line. Equipment configured for an approximate 1 kg format. MAIN FEATURES -Manufacturer: FMC / JBT -Series: STERILMATIC -Type: Continuous sterilizer / Cooker-Cooler -Installed format: 1 kg -Continuous thermal treatment of packages -Automatic sterilization and cooling process -Continuous product transport -Control of dwell time during the process -Industrial thermal circulation system -Integrated treatment sections -Piping, valve, and process distribution system -Integrated fans / circulation systems -Robust industrial construction -Designed for continuous operation -Especially suitable for high-capacity canning lines Hjdpfszxcb Ejx Aa Iou PROCESS The FMC-JBT STERILMATIC is designed to perform the thermal treatment of packages as they continuously move through the equipment. The previously filled and sealed packages are automatically introduced into the system, where they remain for a controlled process time and are subjected to the established thermal conditions to achieve the required treatment. Subsequently, the packages move to the cooling stage, progressively reducing their temperature before being discharged and transferred to the next production operations. The continuous system avoids the repetitive loading and unloading operations typical of conventional batch autoclaves and is particularly interesting for lines with large production volumes. APPLICATIONS Especially suitable for canning industries and manufacturers of high-production canned foods that require a continuous thermal process. It can be integrated into production lines for vegetables, legumes, tomato products, fish, meat, pet food, ready meals, and other packaged foods, always in accordance with the configured format and thermal process. The combination of FMC-JBT STERILMATIC technology, continuous sterilization, and Cooker-Cooler system provides an industrial solution for large-capacity canning lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK 270-litre pressure vessel with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial facilities, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an essential component of any compressed air system. Thanks to its optimized design and high pressure resistance, it can serve both as a storage buffer and as an element for stabilizing compressor operating parameters. Key Features of the 270 L Pressure Vessel Professional pressure-rated construction – made of high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT certification and CE marking – compliance with European safety and quality standards. 11 bar working pressure – suitable for most pneumatic systems, including those with higher operating requirements. High 270-litre capacity – provides stable pneumatic system supply and reduces the frequency of compressor start-up cycles. Multiple connection ports – 5 connection ports with diameters of 1 1/4", 2", and 1/2" allow flexible connection to various installations. High-quality workmanship – durable external paint coating. Space-saving vertical design – allows for efficient use of available space in the workplace. Construction and Technology – Robust Design for Demanding Applications This compressed air tank has been designed for intensive use in industrial environments. The body is made of structural steel with a 4 mm wall thickness, ensuring resistance to pressures of up to 11 bar and providing long-term durability. All welds undergo rigorous quality control, while the tank surface is protected with a coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE symbol and the UDT notified body number, confirming its approval for use on the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Precision and Operating Efficiency – Stable Pressure and Optimized Compressor Performance With a large 270-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This enables the smooth operation of compressed-air-powered equipment and significantly extends compressor service life by reducing the number of start/stop cycles. The vertical design allows for compact installation, which is particularly important in facilities with limited space. A properly selected compressor tank minimizes pressure drops and prevents pneumatic system overload, resulting in greater efficiency and safety throughout the installation. Standard Equipment Connection ports: 5 pcs. – diameters 1 1/4", 2", and 1/2" Nameplate with CE marking UDT notified body number Complete technical documentation and pressure vessel passport External anti-corrosion coating Technical Specifications Specification Value Weight 92 kg Number of connections 5 Hjdpfx Aozwl H Iea Ieu Connection sizes 1 1/4", 2", 1/2" Dimensions 1825 × 500 mm Tank capacity 270 L Working pressure 11 bar Wall thickness 4 mm Diameter Ø 500 mm Height 1825 mm