Used Powder Coating System for sale (39,368)

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. Itjdpfofz Nb Tex Ag Uob The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. Itsdpfefz U S Eex Ag Ujb This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. Itedpfx Ajfz U Tisg Ueb History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Condition: new, functionality: fully functional, Year of construction: 2025, ELECTROSTATIC POWDER COATING OVEN Our experienced team prepares powder coating box ovens in special design and special sizes for each project. Please contact us for detailed information Ijdpev Nvy Tsfx Ag Ujtb

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 1306/2013-07, A fully equipped industrial powder coating booth is now available for sale, ideal with optional motor and automatic filter cleaning: • Dimensions (external): 1850 × 1600 × 2600 mm • Extracted air volume: 3,000 m³/h • Motor: approx. 1.5 kW • Filter cartridges: 2 pcs + automatic cleaning • Electric connection: 3 × 380 V/220 V, 50 Hz • Air velocity: 0.2–0.5 m/s • Maximum suspension size: 250 mm × 1000 mm • Spray opening: 1100 × 1100 mm Accessories: • Sheet metal housing with transparent panel • Extraction ventilation + silencer Itsdpfx Aow Nv Axjg Uob • Compressed air tank + preparation unit • Automatic filter cleaning, powder recirculation container • EU-standard control cabinet, pneumatic system + airflow sensor 🟢 Condition: • Good technical condition, well-maintained • Documentation and fully operational system 💰 Asking price: 5,200 EUR + VAT

Year of construction: 2016, condition: as good as new (ex-display), Manual PVC powder coating line for 3D fence panels ( NEVER USED ) Type of coating – electrostatic PVC coating line is semi-automatic. Need 2-3 workers. Capacity of furnace – 10 pieces of 3D fence panels...baking time approx. 15 minutes ( with color of manufacturer IGP ). Of course baking time depends of color quality and chemical composition of color. The line is made on a modular system, which means that it can be installed in several ways, according to the possibilities of free space in the factory. Dimensions of line components - Iodeiryd Uepfx Ag Uetb 1. Polymerization furnace – 2.500 x 3.500 ; Height – 3.200 mm 2. Painting booth ( 2 pieces ) - 3.000 x 2.000 ; Height – 3.200 mm 3. Washing chamber - 2.200 x 3.500 ; Height – 3.200 mm 4. Bath - 2.500 x 2.500 - Height – 900 mm plus two new Gamma pistols.

Year of construction: 2016, condition: as good as new (ex-display), Manual PVC powder coating line for 3D fence panels ( NEVER USED ) Type of coating – electrostatic PVC coating line is semi-automatic. Need 2-3 workers. Capacity of furnace – 10 pieces of 3D fence panels...baking time approx. 15 minutes ( with color of manufacturer IGP ). Of course baking time depends of color quality and chemical composition of color. The line is made on a modular system, which means that it can be installed in several ways, according to the possibilities of free space in the factory. Dimensions of line components - 1. Polymerization furnace – 2.500 x 3.500 ; Height – 3.200 mm 2. Painting booth ( 2 pieces ) - 3.000 x 2.000 ; Height – 3.200 mm 3. Washing chamber - 2.200 x 3.500 ; Height – 3.200 mm 4. Bath - 2.500 x 2.500 - Height – 900 mm plus two new Gamma pistols. Itodpfeil Agnox Ag Ueb

Condition: new, functionality: fully functional, Year of construction: 2025, Box Type Electrostatic Powder Coating Oven: Length: 500cm, Width: 250cm, Height: 300cm - Powder Coating Booth with Filter: Length:300cm, Width:220cm, Height:270cm Isdpfxjv Nvndj Ag Ujtb - Electrostatic Powder Coating Equipment: Model: HMK MULTICOLOR, Type of Use: Manual

Condition: new, functionality: fully functional, Cooling capacity Iodpjw Snbfofx Ag Uotb • Throughput 800 kg/h • Product inlet temperature 140°C • Product end temperature

Condition: new, functionality: fully functional, XTS56 - 24D Twin Screw Extruder Ijdpow Snlwofx Ag Uotb • Water Cooled 130kW AC Motor and Drive. – Low Noise

Condition: new, functionality: fully functional, The BBACooler model CCC-95/60 is a compact drum cooler for cooling and solidifying of viscous products. Itedpfxow Sm Epe Ag Ujb Cooling capacity • Throughput 450 kg/h • Product inlet temperature 140°C • Product end temperature

Year of construction: 2023, condition: new, functionality: fully functional, Xtrutech XTS 35 for powder coatings (180-350 kg/hr) 1. PURPOSE AND MAIN FUNCTIONS OF THE LINE The extrusion line for powder coating production is part of a whole production process and is used for the production of polymer powder coatings. The extrusion line includes the following technological processes: formation of a homogeneous melt of heated powder coating by mixing, shaping of the melt, subsequent cooling of the product and its crushing into fine fractions. 2. LINE COMPONENTS - Twin-screw extruder type XTS 3. DESCRIPTION OF THE EXTRUDER COMPONENTS 3.1. Twin-screw extruder type XTS 35 The extruder for powder coating production consists of: - 24D hydraulically opening barrels at the top and bottom, providing quick access for cleaning, maintenance and emergency repair of barrel liners and screw element shafts. - Rectangular loading port for dosing of materials which are difficult to dose. - Robust high flow water cooled units with 5 electrically heated (aluminium bronze heating plates of 2 kW each) control zones that provide excellent temperature control. Maximum operating temperature is 350°C. - The barrel on the discharge side is equipped with a cooled discharge adapter and a knife. - Screws with screw elements. Screw speed 0 - 900 rpm. Water cooled AC motor power of 26kW. The stepless (PIV) gearbox is rated at 139Nm and protected by an automatic torque limiter. - Latch lock / quick-release coupling of shaft connection and toothed shaft. Mains supply voltage: 400±6%, 3 phases, 50 Hz (o+earth). Control: 24V. Water-supply: 70 l/min at 15°C and a coolant pressure of 4bar. Approximate dimensions: L=2250mm W=1000mm H=1600mm Approximate weight: 1600kg. Iodpfx Aewz Ntisg Ustb High-volume geometry D/d =1.8 AC motor power 26 kW Screw speed 900 rpm Average output 180 - 220 kg/h, max. 350 kg/h

Condition: new, Year of construction: 2025, VFK MANUAL POWDER COATING BOOTH WORKING PRINCIPLE The extraction fan is located at the top of the booth, at the end of the system. The pressurized air flow created by the fan carries the powder coating particles towards the filters and collects them on the outer surface of the filters. Powder coating filters are cartridge type and are cleaned during operation by a pull-reverse filter cleaning system. The pull-reverse system consists of pulse valves and a compressed air tank, controlled automatically or operated using manual buttons on the control panel. POWDER RECYCLING As a result of the filter cleaning system, powder coating particles fall down and are manually collected in a bucket at the bottom of the filter unit. This bucket can optionally be a simple drawer or can be with a sieve having a vibration motor with a powder pump to sift the powder coatings collected on it and transfer the sifted powders for reuse and send it to the powder recovery system for reuse. The powder coating booth is designed as single-sided open type for manual powder coating. There is an electrical panel on the system and the electrical wiring up to the motors has been done. Iodpjvv Rfkofx Ag Uetb Made in Türkiye CE Mark We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: new, Year of construction: 2025, functionality: fully functional, TRANSFER TYPE POWDER COATING LINES The transfer type conveyor consists of a combination of conveyor rails. The effective powder coating system layout is designed by our project department according to your workshop dimensions based on the products to be coated and daily quantities. Workpieces are loaded onto the bars which are moved manually or automatically to bring the products to the needed, booth or oven. The advantage of this system is that the products are loaded on the conveyor and do not tire the operator as they move on the conveyor until the end of the process, so it is an efficient system. The movement of the bars can be automated at any point in the system, making the entire conveyor line a cost-effective alternative to power&free conveyors. In the painting system, automatic coating can be achieved by adding a conveyor system above the powder or paint booth and adding a reciprocator and automatic gun to the coating booth. We offer the best technical solutions and competitive prices * Office in France and Germany, Itsdpfx Ajvv H Uusg Uob Contact us for more information and quotations

Condition: new, Year of construction: 2025, HORIZONTAL POWDER COATING LINE FOR ALUMINUM PROFILES We are adding value to your production. * Conveyor speed up to your capacity per day Aerial conveyor - monorail or power&free type Itjdovv Nh Rspfx Ag Ueb Automatized powder coating booth, metal or PVC antistatic structure Reciprocated automatic powder coating equipment system Tunnel type polymerization oven - gas, diesel or electrical heating source Made in Türkiye CE Mark We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: new, Year of construction: 2025, POWDER COATING SYSTEM FOR CAR WHEELS AND RIMS Oven contains 4 pieces of 22’ wheel rims in 1 batch COMPONENTS OF THE PLANT: * 1.5x1x1.3m POLYMERIZATION OVEN, 18KW ELECTRICAL * VFK-2 ONE-SIDED POWDER COATING CABINET * OVERHEAD CONVEYOR AND LOAD TROLLEYS * MANUAL POWDER COATING EQUIPMENT Delivery: 6-8 weeks EXW Istanbul factory Assembly and training included We offer the best technical solutions and competitive prices * Office in France and Germany, Itodpfsvv Rfdox Ag Ujb Contact us for more information and quotations

Year of construction: 2025, condition: new, DESIGN VFDK powder booths are designed as an open wall cartridge filtered for manual powder coating use from one side. Powder booths are manufactured of externally powder coated sheet metal structure with castor wheels at the ground. The system consists of filtration system with automatic cleaning, ventilation and electrical control panel. Long lasting 100% polyester cartridge filters are used for high efficiency. WORKING PRINCIPLE Air flow generated by the extraction fan carries overspray powder coating particles to the filter unit and collects them at the outer surface of the filters. Filters are cleaned by pulse valve operated pull-reverse system during the operation. Powder coatings accumulated by this way at the ground of powder booth are collected manually in the drawer and can be reused after sieving. A hopper with vibrated sieve can be added optionally for powder recycling. ADVANTAGES Saves space in the workshop Easy and fast cleaning Itodpfxevv H Hds Ag Ujb Made in Türkiye CE Mark We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: new, Year of construction: 2025, VG1E-VN MANUAL FAST COLOR CHANGE TYPE POWDER COATING SYSTEM The powder coating system is designed for powder coating applications with frequent color changes during the day. The equipment is on a wheeled stand for ease of operation. Powder coating is sucked directly from the powder box, which allows rapid color changes. The powder box is placed on the vibrating table, suction pipe fluidizes the powder coating in the box, ensuring effective mixing, and the powder coating is homogeneously sent to the gun through an injector placed on the suction pipe. TECHNICAL SPECIFICATIONS Input voltage : 220V 50Hz Air need : 350 lt/min Input pressure : 6 bar Vibration motor : 220V 25W Gross weight : 55 Kg VG4 CONTROLLER AND MANUAL POWDER COATING GUN The VM manual powder coating gun is completely dismountable. The ergonomic gun handle design ensures ergonomic handling and does not tire the operator during coating application. The high voltage cascade has a long service life, its tightness prevents contact with dust and minimizes the risks in this area. The well-designed head assembly and nozzle ensure excellent polarization and homogeneous coating on surfaces during application. The electronic touch panel on the back of the gun provides ease of use during operation. The control unit is digital and allows precise adjustment of settings via the touch panel. Isdsvv N Tyopfx Ag Ujtb TECHNICAL SPECIFICATIONS Gun Type : Corona System Polarization : Negative Cascade input voltage: 0-10,5V DC Output voltage : 100 kV Output current : 0 -150 μA Powder output (3,5 bar) 500 g/min Protection class : IP 54 Voltage cable length : 5 m Powder hose length : 5 m Gun weight (gross) : 450 g Operating temperature :-20-50 ° C Nozzle :Flat jet or Ø16-20-24mm deflectör

Condition: new, functionality: fully functional, Year of construction: 2025, Powder Coating Booth + Manual Powder Coating Spray Gun Height: 250cm Isdpev Nvkfefx Ag Uotb The number of filters is increased according to the project Advantages of the Paint Booth The use of paint booths offers many advantages to businesses High Paint Quality: Working in an environment protected from dust, dirt and other external factors results in a smoother and more aesthetic surface. Energy Efficiency: Modern paint booths have energy-saving features. This reduces costs and provides an environmentally friendly solution. Work Safety: Employee health is protected by expelling harmful gases and particles that may occur during paint applications. Compliance: Paint booths make it easy to meet industry quality standards.

Condition: good (used), Year of construction: 1995, Semi-automatic edge decoating system, Working height: 900 mm. Width: 1400 mm, depth: 1200 mm, Max. Height: 1490 mm (up to operating terminal), Weight: 180 kg. Ijderidqxspfx Ag Uotb

Condition: ready for operation (used), Year of construction: 2020, Wichelmann Drum Coater Potato Flour Coater Potato flour is conveyed into the drum via a spiral screw. Itedpfx Agowb Ukaj Uob The discharge conveyor has a shaking and trill function. The speed control knob is defective. The shaft has a dent and is bent. The shaft where two wheels are mounted to rotate the tumbler is bent.

Condition: ready for operation (used), Year of construction: 1993, A candle filter system Faudi with precoating principle for the treatment and purification of grinding oil is available. Operating fluid: grinding oil, flow rate: 360m³/h, tank capacity: 180m³, control: Siemens. Documentation available. An on-site inspection is possible. Iodpfx Asxnbr Isg Uetb

Condition: used, Year of construction: 1995, System with inlet and outlet sections. Isdpjwkh U Djfx Ag Ustb Max. glass height: 2500 mm. Total length: 6200 mm. Max. Height: 3840 mm.

Condition: used, Year of construction: 2000, 1 – Semi-automatic lower flap folder Manufacturer : Soco System Model: F-100-P Itsdsx R Aqyjpfx Ag Ujb Year: 2000 Carton size :Format carton : Min. carton width : 320 mm Max. carton width: 520 mm Max. case length: 700 mm 2 – Automatic case and flap sealer / Tape sealing machine Manufacturer : Soco System Model: T-400 5-5-7 Year: 1989 Adhesive top and bottom closure. Capacity: Max. 18/min. Carton size :Format carton : Mini: 200 x 120 x 95 Max: 550 x 460 x 470

Condition: used, axle configuration: 3 axles, first registration: 08/2018, color: other, Year of construction: 2018, Empty weight: 6.939 kg The 2018 System Trailer 3 Axle SAF Disc Curtainsider features a galvanized chassis and anti-theft tilt, priced at €11,950 without VAT. It showcases good tire conditions across all axles, enhancing its appeal for heavy-duty transportation needs. The trailer is designed for optimal security and durability, making it a reliable choice for logistics operations. Tire profile dept: Axle 1: left 13 mm right 5 mm Axle 2: left 7 mm right 6 mm Axle 3: left 7 mm right 6 mm Isdpov Ica Djfx Ag Uotb