Used Postmix Dispenser for sale (441)

Condition: ready for operation (used), Year of construction: 2012, Rated output: 5000bottles/h, running direction: LM, control range: 1000-6500bottles/h, bottle material: PET/glass, bottle format volume: 200ml/250ml/400ml/500ml/750ml/1000ml/1200ml, glass bottle height range: 59mm-121mm, glass bottle diameter: 65mm/70mm, application: neck ring label/body label/back label/wraparound label. Including three self-adhesive dispensers, height adjustment, central lubrication, breakage detection, bottle counter, clamp stars, swivel arm and Etima hot glue for Rollina and neck ring. Documentation available. An on-site inspection is possible. Gsdpfx Aey N Dd Soaxjbl

Condition: ready for operation (used), Year of construction: 2011, A Gernep cold glue and self-adhesive labeling machine for spirits is available. Nominal capacity: 12000bottles/h, direction of operation: RM, control range: 3000-18000bottles/h, bottle format volume: 700ml/750ml/1000ml, bottle material: glass. Including two cold glue units, two self-adhesive dispensers, cold glue unit height adjustment, diameter adjustment slide, breakage detection, bottle counter, side cam alignment, dating unit and Etima neck ring preparation. Documentation available. An on-site inspection is possible. Gbjdpfxoy N Dfcs Aaxel

Year of construction: 2025, condition: new, New machine Year of manufacture: 2025 Features and technical data: Standard configuration: - Robust machine base - Dowel system for: Dowel diameter 8 mm, Dowel length 35 mm (factory setting, adjustable from 30 to 40 mm), Dowel protrusion 12 mm (factory setting, adjustable from 7 to 20 mm) - Recoil-free gun - Vibratory feeder for dowel transport - Dowel diameter and length control with Auto-DL-Select system - Water supply system for pre-glued dowels - Water tank (stainless steel, 7.5 l) - Closed water system with 6 bar water pressure and spray nozzle - Electronic control with: Godpfxjwx Aado Aaxjbl - Main switch On / Off - Program selector switch Water / Water + Feeding - Potentiometer for dowel feed via vibratory feeder - Potentiometer for adjusting water injection quantity - Control lamp for indicating minimum water level in the water tank - Mobile base - Compressed air: 6 bar / Electrical: 230V, 1Ph, 50Hz HoKuTech DübelJet with option for opposing hole processing: 1 unit HoKuTech | DübelJet with upgrade kit for LeimJet including fixtures for attaching/connecting to the DübelJet including height-adjustable suspension for glue hose including: 1 HoKuTech | LeimJet Glue dispensing unit for opposing hole processing Viscosity for PVAc glues up to 75,000 mPas Includes dowel nozzle for Ø 8 mm, pointed nozzle Location: Flörsheim Availability: Immediately

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 15507225, functionality: fully functional, operating hours: 9,980 h, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, number of slots in tool magazine: 32, rotational speed (max.): 20,000 rpm, rotational speed (min.): 50 rpm, TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 420 mm Travel Z-axis: 610 mm Feed rates: 1 - 20 m/min Machine pallet Pallet dimensions: 1,260 x 490 mm T-slots: 9 x 12H8, 50 mm spacing Max. spindle speed: 50 - 20,000 rpm Tool system Tool holder: SK30 Number of tools in magazine: 32 MACHINE DETAILS Control: HEIDENHAIN iTNC 530M Dimensions & Weight Dimensions / Weight: 2,500 x 2,560 x 2,700 mm Installation dimensions: 4,300 x 2,950 x 3,012 mm Weight: 5,100 kg Connected load: 22 kVA Operating hours Gbedpfjyznvcex Aaxjl Spindle hours: approx. 9,980 h Control on-time: 78,165 h Machine on-time: 91,869 h Program run time: 54,682 h EQUIPMENT 3D touch probe, infrared Coolant system 3 bar / 30 l/min Oil mist extraction system Minimum quantity lubrication system with dual dispenser FEHLMANN HSC settings (Cycle 327) Note: The clamping devices and tools shown in the images are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 5,797 h, clamping force: 800 kN, screw diameter: 40 mm, total width: 2,042 mm, total height: 1,711 mm, overall weight: 8,200 kg, product length (max.): 4,545 mm, This Netstal Elion 800-270 was manufactured in 2021. It features a robust AXOS control system and a high-speed injection unit capable of 450 mm/s. The machine includes a screw diameter of 40 mm and a fully integrated 9 kW hydraulic unit. It supports a tool installation height range of 200–500 mm and is equipped with a Euromap 67 robot interface. If you are looking to get high-quality injection molding capabilities, consider the Netstal Elion 800-270 machine we have for sale. Contact us for more information. Additional information inclusive Wittmann Primus 16T robotTravel ranges: Z: 1250 mm, Y: 800 mm, X: 590 mm5 kg payloadControl system: Wittmann CNC8, Primus R8.3 softwareR8 Teachbox TouchVacuum circuit with additional 5/2-way valve • Injection Unit: 270 Powermaster with injection speed of up to 450 mm/s • Screw Diameter: 40 mm, type B, 3-zone screw Godpfxox D Rlpj Aaxjbl • Nozzle Type: Pneumatically controlled needle valve nozzle with additional heating zone • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Clamping Force: 800 kN • Minimum Installation Height: 200 mm • Maximum Installation Height: 500 mm • Hydraulic Unit: Fully integrated hydraulic unit 9 kW with 140 bar operating pressure • Pneumatics: 1 Air valve to 890 Liter, 1 additional Air valve to 890 Liter • Safety Cover Execution: Locked doors, top • Operator Identification: User recognition via PIN • EUROMAP 67: Standard + dynamic retractionInterfaces: Colour feeder, Freely Configurable DIO: 4x Output/2x Input • Tool Monitoring: Available on DFP • Voltage Fluctuation Compensation: UPS presentExtrasSocket box 1:X2510, Cekon, 16A /400V, 3P-N-PE via HSX2511, Cekon, 16A /400V, 3P-N-PE via HSX2512, Cekon, 16A /400V, 3P-N-PE via HSX2513, Cekon, 16A /400V, 3P-N-PE via socket contactor(Function 0060)Sockets for colour dispenser:1X2507 / 1W7145, Schuko 10A / 230V, 1P-N-PE, via HSplus 1X9507 / 1W9507, Schuko 10A / 230V, 1P-N-PE, via HSMount sockets and base housings on bracket 110.180.6902(Function 0060)1X3123, Zone 12 HAN 4A screw-in, power only1X9123, Zone 12 HAN 4A screw-in, sensor only(Function 0110)Pneumatics 1, 1x3/2WV 890L, mounted on DAP, W2008(Function 0470)Pneumatics 9, 1x3/2WV 890L, mounted on BAP, W2016(Function 0470)Cooling water 1:X4051 W9088 Flow measurement B1135 - B1138 (return),Pressure measurement B1211 (flow)X4060 W9260 HAN16E Temperature measurementB0801 (flow), B0832 (return)(Function 0490)Cooling water 2:X4050 W9086 Flow measurement B1147 - B1150 (return),Pressure measurement B1212 (flow)X4059 W9259 HAN16E Temperature measurementB08813 (Flow), B0814 (Return)(Function 0490)Dosing 1C:1x suction conveyor and 1x paint dosing1X2018/1W7146, HAN 4A for paint dosing1X9191/1W9946, HAN 3A for suction conveyormount sockets and base housings on holder 110.180.6902(Function 0550)

Condition: used, Year of construction: 2004, CLEARANCE SALE Automatic Colour Kitchen : Textile Colors Professionally marked, dismantled, and Preserved ! Must be move immediately Make : TERMOELETTRONICA Type : TERMO COLOR Rot Head with 72 Positions Yoc : 2003 , Started in 2004 Pumps / Tanks for thickeners : 6 Pneumatic pumps for pigment & reactive : 12 Dyes Supply Tanks : 20 Max. No of colours : 31 Computerised colour dispensing system & automatic weighing Semi-automatic labelling unit Computerised PC control With drum transportation & storage Roller Conveyor Belter with Pushing system With 2 lifting / lowering devices Storage tank with mixer & electrical pumps Supporting structure with 5 pneumatic pumps and 10 storage tanks 50lt for disperse dyes - one mixer adjusted as permanent part of kitchen as a part of conveyor trail. - washing unit for mixer working automatically. - system, which is randomly circulating each colour connected with kitchen - for Re-use of colour, there is program in computer system, which enables re-use of additional printing liquid - can produced pigment-reactive-disperse with this unit Installed power : 20 KW Power in use : 5 KW Gbsdpfjy Ity Tsx Aaxjl Power supply : 3x380V 50 H z Required : cold water 3 mq/h compressed air 6/7 BAR

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, Dishwasher / dishwasher Model: D 500 Stainless steel version Universal dishwasher 3/5 min rinsing time 1 plate basket, 1 universal basket 500 x 500 and cutlery insert Output: 12 baskets / hour with drain pump Detergent and rinse aid dispenser Connection 230V, 2.58kW, Schucko plug Gedpfx Aashfhhgoxjbl Dimensions: 550 x 605 x 830 - 860mm, WxDxH Demonstration / NEW machine with warranty Visit our large bakery machines warehouse!

Year of construction: 2009, condition: used, Palletiser Solema Cartesio Year: 2009 Description: - Automatic setting - Colour monitor with touch screen - Infeed conveyor Gbodpfx Aevc Ucgoaxsl - Stacking robot - Pallet dispenser - Slip sheet feeder - Pallet transport system

Condition: good (used), Strapping machine, strapping kit, tensioning and sealing device, textile strapping kit, steel strapping kit, steel strap tensioner -Manufacturer: Signode, Textile strapping set 19 mm with tensioning device and dispenser accessories -Tape dispenser: DF 9 -Span: PFH Tensioner 3/4 - 1-1/4" Gbjdpfxeyzf Rwj Aaxjl -Closing device: C5823 -Staples/Reel tensioners/Individual components: see photos -Transport dimensions: 650/550/H990 mm -Total weight: 67 kg

Condition: used, mileage: 607,408 km, power: 260 kW (353.50 HP), first registration: 12/2003, fuel type: diesel, number of seats: 38, gearing type: automatic, emission class: euro3, color: white, Equipment: ABS, air conditioning, * Our internal number: 1114 * Take-away price - Pick-up price * O 530 G Gbedpfxetpr U Ro Aaxsl * EZ 30.12.2003 * Large air conditioning system * 260 KW / EURO 3 * ZF automatic transmission * Matrix display * Folding windows * Electric wheelchair ramp installed * Tinted glass * Video surveillance * Ticket dispenser wiring * Lifting/lowering * 3 x double-wide interior swing doors * Compressor replaced * Alternator replaced * New four-circuit protection valve - 10/21 * All V-belts and rollers new - 10/21 * New paint: 2019 * Clean frame! * Extensive CUSTOMER SERVICE in October 2021 - air filters, fuel filters, oil filters, etc. * etc. * All information is provided without guarantee. * We reserve the right to sell items prior to purchase.

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Bio-Jet, Front Line and Air Jet Dispensing Technologies Gbsdpfxsya Hvqj Aaxjl Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Year of construction: 2000, condition: excellent (used), machine/vehicle number: 12088 10, Performance: 125 cups per min. (gross) Consists of: -Destacker -Bottom label dispenser -Side label dispenser 1 + 2 and 3 + 4 -Station for finishing the gluing of the side labels (ironing system) Gbsdpfxon D Hczj Aaxel -Control station with camera surveillance -Stacker with counter -Outfeed conveyor for finished product The machine can also label round cups (160-180°, around). Cup height: 120-130 mm

Condition: excellent (used), COVER LABELING SYSTEM (Zweckform with Schleuter label dispenser) Age : ca. 1990 Performance: 100 cups/lids per minute Equipment / Additional information: Consists of: Gbodpfx Aasn D E Hpoxjl - Stacker - Labeling unit - Stapler

Condition: used, axle configuration: 3 axles, first registration: 11/2023, next inspection (TÜV): 11/2024, Year of construction: 2023, Equipment: ABS, Accident damage to the ramenfer floor 6x new tires with rims Gsdovvfwzopfx Aaxebl 40 foot tipper Own tipping unit, powered by the truck batteries Lift axle Water tank with soap dispenser Tool box LED lights Possible for transporting 40 feet We have the following for rent: 20 foot 2 or 3 axles 20 foot tipping chassis 40 foot tipper chassis 40 foot chassis with rear extension 45 foot multi-chassis 18 to 26 m³ rear tipping troughs Are you interested? You can request our price list at any time without obligation. We sell tires and rims for trucks & trailers of brands: Fulda + Bridgestone + Petlas Sizes 315 / 55 ? 22.5 385 / 55 ? 22.5 385 / 65 ? 22.5

Condition: used, maximum load weight: 28,070 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2020, next inspection (TÜV): 01/2027, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Knapen Walking Floor semi-trailer K100 92 m³ 10 mm Floor, New MOT (TÜV) General Manufacturer: Knapen Trailers * Model/Type: K100 A5060 * Year of manufacture: 2020 * Chassis number: XPNK0C100LD071956 202003-0071956-r_order-configur? * Country of registration: Germany * Unladen weight: approx. 7,924 kg 202003-0071956-r_order-configur? * Gross permitted weight: 36,000 kg 202003-0071956-r_order-configur? * Max. axle load: 24,000 kg * Max. kingpin load: 12,000 kg (permitted in country of registration) * Volume: approx. 91.9 m³ * Tapered walking floor semi-trailer * Axle version: fixed, fixed, fixed ----Dimensions * External length: 13,670 mm * External width: 2,550 mm * External height: 4,000 mm * Internal height front: 2,690 mm * Internal height rear: 2,785 mm * Coupling height: 1,150 mm * Kingpin to 2nd axle: 7,750 mm * Axle spacing 1st–2nd axle: 1,310 mm * Axle spacing 2nd–3rd axle: 1,310 mm ----Axles & Running Gear * 3 x SAF 9 t Intradisc+ Integral CD off-road axles * All axles fixed * Disc brakes Ø 430 mm * 10-bolt wheel mount * Air suspension with standard control console (left in front of axles) Gbedpoyrvt Aefx Aaxjl * Lift axle, fully automatic via EBS * Including hill start assist (3x brakes) * Radio remote control for lift axle ----Tyres & Rims * Goodyear KMAX T * Tyre size: 385/65 R22.5 * Steel rims 22.5" x 11.75 * 6 wheels in total * No spare wheel ----Body * Closed sidewalls left and right * Sliding partition wall (min. ground clearance 100 mm) * Rear doors with external locking rods * One locking rod per door * Top rail made of steel, swings out left and right * Platform at front bulkhead * Ladder at front bulkhead, left and right * Standard roof bows Ø 60.3 mm (4 pcs) * Bow spacing: 3 x approx. 4,100 mm * Tarpaulin 680 g/m² (RAL 9006 white aluminium) * Tarpaulin supports, 3-position (4 pcs) * Lashing straps (4 pcs) ----Floor / Walking Floor * Cargofloor system CF-500 SL-C * Electric control * Corrugated aluminium floorboards 10 mm (21 boards) * Fixed front wall * Stainless steel plate at rear under floor ----Attachments * JOST landing legs with compensating device * Plastic toolbox, left in front of axles (1000 x 500 x 500 mm) * 30 L water tank with soap dispenser * Closed side underrun protection * Swinging mudflaps * Anti-spray mat on 3rd axle * Long ladder with extendable rear step and platform * 2 x wheel chocks left * Broom and shovel holder right ----Lighting * 6 x round LED tail lights (3-chamber) * LED fog and reverse lights * LED side marker lights (4 pairs) * LED marker lights at rear * Reflective contour marking according to EU regulations * LED work lights at rear (radio remote controlled) * LED work lights near landing legs (radio remote controlled) * LED LCG-2 switch unit ----Hydraulics / Connections * ISO-N and ISO-S connectors + 15-pin electrical socket * Knapen Trailers V1 radio remote control * Hydraulic connections centred on front wall (vertical) * Pressure line left, return right * Additional hydraulic connections at landing legs * Brake connections present * Acoustic reverse warning (manually adjustable) ----Paintwork * Body in RAL 7011 iron grey * Wheel hubs in RAL 2008 light red-orange * Chassis and underside unpainted If you have any further questions, I am at your disposal.

Year of construction: 2018, condition: good (used), Bagging line consisting of Incline Conveyor with Flights and product speed control Gsdpfjinbhtex Aaxobl Weigher 4 Dispensing Buckets PLC Controller for complete system In good working order

Condition: excellent (used), Nordson Hot Melt Heated Hoses 4 qty 8 ft long heated hoses Complete with air solenoids, modules, cord sets & dispensing guns Gbedpfx Aajwuqfyexjl Mounting brackets included In excellent working condition

Condition: used, Nordson Problue 4 Hot Melt Pump Model Problue 4 Complete with 2 heated hose and dispensing guns, air solenoid & modules Glue bead dispensing tub / storage container Mounted on a stainless steel frame Godpfx Aowq Sv Ejaxjbl

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality Gedegq N Ezopfx Aaxjbl

Condition: used, Tenoning spindle 1 St. Number of milling agregates 1 St. Spindle diameter 40 mm Small-scale window manufacturing consisting of: ----- 1) Haberkorn FZS1 slotting machine. Price: €12,500 2) Okoma SF3F table milling machine with glazing bead saw. Price: €4 Oertli tooling for the Haberkorn and Okoma machines. Price: €7,500 1 set of wooden windows IV 68/78/88 and 1 set of wood-aluminum windows IV 68/78, manufactured in 2011 4) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatic hardware. Price: €7 (Hardware can be converted for an additional charge upon request!) ----- Technical Manufacturer's Description: - Haberkorn FZS1 slotting machine with automatic feed, - Stepless height adjustment D 40 mm Crosscut saw: - Spindle arrangement: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Pneumatic horizontal positioning, manually adjustable - Guard and dust extraction hood with extraction port diameter: 100 mm Slotting spindle D 40 mm: - Power: 7.5 kW - Speed: 4200 rpm - Working length: 252 mm - Maximum tool diameter: 340 mm - 220 mm stroke, stepless height adjustment via Precision ball screws - Guard and dust extraction hood with extraction port diameter: 180 mm - Automatic brake with speed monitoring Studio table: - Swivel range +/- 65 degrees - Automatically changing counterweight (programmable) - Pneumatic clamp - High-precision electric degree indicator - Automatic length compensation - Counterweight at every angle setting in the cutting plane Optional equipment: - Laser for workpiece positioning - Pneumatic saw position - Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools - Dust extraction ports 2 x 120 mm - Spindle length 270 mm - Counter gauge with fine adjustment and turret - Triple stroke, maximum stroke height 90 mm - Glass strip cutting saw with protective and extraction hood, 80 mm diameter - 8-roller feed unit with stand and hold-down arm, required for the glass strip cutting saw attachment - Pneumatically controlled dispensing unit for edge drive, speed 6000 rpm - 2 x 3 kW motors - Mounting diameter 30 mm ----- 3) Oertli tools for Haberkorn and Okoma machines - 1 set of wood window IV 68/78/88 - 1 set of wood-aluminum window IV 68/78 Tools are sold in the condition, scope, and with accessories as currently available in our stock. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems mentioned and drawn. [Note regarding window cuts, tool drawings, and tool system listings:] ----- 4) Götzinger OBM Plus Corner Hinge and Olive Drilling Machine -Corner and scissor hinges + handle olive drilling -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x Olive drill head 24 mm -1x Double-head corner hinge -Maco MultiMatic fitting -1x Adjustable flip stop, left, with 6 stops Gsdpoxa Hi Nefx Aaxobl -1x Adjustable flip stop, right, with 6 stops -1x Machine stand complete with storage tray -220/400 V, 60 Hz, 1.3 kW -1x Roller conveyor appr...

Condition: good (used), Year of construction: 2011, Manufacturer: Bonino Type: 37458 Weight: 230 kg Gbsdpfx Aopl T A Ejaxol Inclusion dimensions: 2300 x 1000 x 2900 mm Year : 2011 Electrical data: 400 v; 50Hz; 0.7A; 0.18 kW Belt size (laminated): 180 x 2300 mm Hopper size: 210 x 210 mm Dispensing height: 1850 mm It has a track with active cooling.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, We are offering this very well-maintained bulk material silo, including currently calibrated/certifiable weighing technology, year of construction 2017. This is a GRP (glass-fiber reinforced plastic) bulk silo (50 cbm) with certified weighing technology. Equipped with premium brand components (Reich Silo, Siemens Siwarex). The silo is drivable underneath and is currently used as a pellet filling station. Features: - GRP silo with 50 cbm capacity - Substructure with 3.0 m clearance height - Weighing system (weighing container, rotary valve, etc.) => dispensing possible down to 20 kg as the smallest delivered quantity - Loading unit/hose (can be fitted with bag attachment), height adjustable via manual winch - Control system (switch cabinet, EC card device/reader, receipt printer, data transmission, remote maintenance) Comprehensive documentation is available (structural calculations, foundation plans, etc.). Gedpoy Ey Sqofx Aaxobl Manufacturer: IFA (system integrator) Year of manufacture: 2017 Condition: very good Category ID: 399 Type: Bulk silo with certified weighing technology Location(s): Upon request (company address provided is not the silo location) If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2015, 1. Veneer sewing machine Kuper Brand: Kuper Model: Multi EV-1000/GL Serial no: K151-00032 Article no: 160802 Year model: 2015 Tech data: Max operating width in the direction of the fiber: 1000mm Min operating width in the direction of the fibre: 300mm Veneer thickness: 0,5-2mm Max Veener sheet length: 1000mm Min vener sheet length: 300mm Feed speed 30m/min Compressed air 6-8 bar Dimension of the machine (LxWxH): 6605x2450x2200m 2. Feeder Kuper Brand: Kuper Model: Aufgageband 1000x1000 Engine power: 0.75Kw 3. Dispenser Kuper Brand: Kuper Engine power: 0.75Kw 4. Electric cabinet Kuper Make; Cup Model: Schaltschrank 1/1 zu Gbsdpfx Aaoipx Aioxol Stock no: 2001307PÅL

Condition: new, maximum load weight: 29,760 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,890 mm, loading space width: 2,450 mm, loading space height: 2,100 mm, loading space volume: 51 m³, total width: 2,550 mm, total height: 3,710 mm, Year of construction: 2026, Equipment: ABS, 30 YEARS GREEN EDITION - Grain Master Wielton Bulk Master with gooseneck Aluminium box tipper with combination tailgate, load volume 51m³ Symmetrically split doors, two grain chutes Floor plate 7 mm ENDUR aluminium HB 114 Floor-wall junction with welded corner pieces Unladen weight: 6,240 kg Fifth wheel height: 1,200 mm New vehicle - immediately available - SAF disc brake axles Ø430 mm - First axle as lift axle - Automatic tipping lowering system - Aluminium drop supports - Foldable steel underrun protection - Aluminium air tanks - Tyres: 6x 385/65 R22.5 Hankook - ALCOA Dura-Bright alloy wheels - Braking system: Wabco 2S/2M - Tilt angle warning sensor - ASPÖCK lighting system with EcoLED III ABERG LED tail lights - 2 x LED reversing lights Gedpfey A A Rqsx Aaxobl - 2 x side-mounted LED work lights - 1 x LED light inside the body - HYVA Alpha low-pressure cylinder 190 bar - Tarpaulin 680 g/m² with quick-release system, central tubes integrated - Working platform mounted on chassis, driver’s side access steps - Tension chain between sidewalls inside the body - Water tank with soap dispenser - 2 x PVC toolboxes, 145 litres - Aluminium leaning ladder, 2,840 mm - Shovel and broom - Steel rear access ladder, extendable - Continuous mud flap on underrun guard - Frame painted in RAL 7021 black grey, body in RAL 6018 yellow green - Tarpaulin in RAL 6018 yellow green - 30 Years / Grain Master graphic Interim sale and errors for this offer expressly reserved. Some images show optional equipment. Only the agreements in the order confirmation or purchase contract are binding. For detailed equipment specifications and pricing, please contact our sales staff. Please get in touch with us.

Condition: used, length ~ 450 mm width ~ 650 mm height ~ 1.100 mm Gjdpfx Aaox R Ttljxjbl Battery-powered hand strapping tool BW-03 with 2 x battery, charger and Cyklop dispenser and 2.5 rolls of strapping.