Used Portal Milling for sale (10,596)

Condition: excellent (used), Year of construction: 2017, Maximum turning diameter 300mm, maximum turning length 510mm, spindle speed 6,000rpm, milling speed 6,000rpm, sub-spindle speed 6,000rpm, main spindle bar capacity 42mm, 2 X 12 station turrets, spindle power 11Kw, Ncedpezcy S Rsfx Aiyju Y axis + /- 32mm, swarf conveyor, coolant., Fanuc OI-TF. barfeed unit.

Condition: good (used), Year of construction: 2015, Maximum turning diameter 255mm, Nodpfezcy Ilox Aiyjcu distance between collet chucks 639mm, swing over bed 270mm, spindle speed 4,000rpm, milling speed 6,000rpm, sub-spindle speed 5,000rpm, main spindle bar capacity 66mm, sub spindle bar capacity 52mm, 3 X 12 station turrets, spindle power 15Kw, Y axis + /- 40mm, swarf conveyor, coolant., Fanuc 31i.

Condition: used, Year of construction: 2000, Hardinge VMC 600 II CNC Vertical Machining Centre with Fanuc Series O-MD CNC Control, Table Size 750mm x 500mm, 20 Tool ATC, BT40 Spindle Taper, Manuals & BT40 Spindle Tools. S/No. NVAAOF0060 (2000) Ncodpfx Aiozdtkheyou Location: This lot is located in Burton on Trent, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2018, 2018 Haas ST-25 CNC Slant Bed Lathe Samchully MH-212 Ø250mm 3 Jaw Power Chuck. Maximum Swing Ø806mm. Maximum Swing Over Cross Slide Ø527mm. Swing Over Tailstock Ø584mm Maximum Cutting (Varies With Turret) Ø381mm. Maximum Cutting Length (Without Workholding) 826mm. Bar Capacity Ø102mm. Distance Between Centre 762mm. Axis Traverses 'X'=318mm, 'Z'=660mm. Rapid Traverses 'X'=24m/min, 'Z'=24m/min. Spindle Bore Ø117.3mm. Maximum Spindle Speed 3,200rpm (29.8kW Motor). Spindle Nose A2-8. 12 Station Turret. S/No. 3112177 (2018). With Coolant System (Tank Capacity 208L), Tool Setting Arm, Tailstock, Jorgensen Chip Conveyor, Footswitch & Signal Tower. Nsdpfezc Id Usx Aiyocu

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 350 mm, feed length Z-axis: 350 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, spindle speed (max.): 10,000 rpm, spindle speed (min.): 50 rpm, total height: 2,500 mm, total width: 5,200 mm, total length: 2,700 mm, table width: 375 mm, table length: 600 mm, table height: 120 mm, type of input current: three-phase, table load: 250 kg, overall weight: 6,000 kg, input voltage: 400 V, workpiece weight (max.): 250 kg, distance table to spindle center: 500 mm, Equipment: rotational speed infinitely variable, 1997 Heckler & Koch BA 18 – 4 Axis CNC Machining Centre – Siemens Sinumerik Machine Manufacturer: Heckler & Koch Model: BA 18 Machine Type: 4 Axis Machining Centre Year: 1997 Condition: Old but working well High-Precision German CNC Machining Centre for Sale in Ireland Used Machine Tools Ireland is pleased to offer this 1997 Heckler & Koch BA 18 4-Axis CNC Machining Centre, a robust German-built vertical milling and drilling centre renowned for accuracy, reliability, and heavy-duty construction. This machine is equipped with a Siemens Sinumerik CNC control, making it a solid choice for workshops requiring dependable CNC milling with integrated 4th-axis capability. Key Features & Highlights Heckler & Koch BA 18 CNC Machining Centre 4-Axis configuration Siemens Sinumerik CNC control Single spindle version Rigid German construction Automatic tool changer Ideal for precision milling & drilling Suitable for general engineering, toolmaking & production machining Technical Specifications – Heckler & Koch BA 18 (Single Spindle) General Machine type: Vertical Milling & Drilling Centre Axes: 4 Axis Control: Siemens Sinumerik Spindle type: Single spindle Tool holder: SK40 Travels (Programmable Working Area) X-Axis: 500 mm Y-Axis: 350 mm Z-Axis: 350 mm Spindle & Performance Spindle motor power: 9 kW (40% duty) Spindle speed range: Infinitely variable 50 – 10,000 rpm Torque: 50 Nm (40% duty) 35 Nm (100% duty) Power transmission: Toothed belt drive Tool System Tool magazine: Chain magazine Tool capacity: 36 tools Tool change: Automatic Average chip-to-chip time: Approx. 5 seconds Maximum tool weight: 4 kg Maximum tool diameter: 63 mm (125 mm with free auxiliary positions) Maximum tool length: 225 mm Accuracy & Feed Rates Positioning tolerance (VDI/DGQ 3441): 0.020 mm Mean position variation (X/Y): 0.008 mm Feed rates (X / Y / Z): 0 – 25 m/min Feed force per axis: 5000 N Measuring system: Rotary encoder with glass scales Table & Load Maximum table load (including table weight): 250 kg Distance table left/right: 400 mm Table to spindle nose: Max: 500 mm (620 mm without table) Min: 150 mm (270 mm without table) Electrical & Utilities Connection voltage: 3 × 380/220 V, 50 Hz Connected load: Approx. 28 kVA Pneumatic supply: Max. 8 bar Sound level at rated operation: Approx. 78 dB(A) Dimensions & Weight Machine dimensions (L × W × H): Approx. 5200 × 2700 × 2700 mm Transport dimensions: Approx. 3600 × 2000 × 2500 mm Machine weight (incl. control cabinet): Approx. 6000 kg Ideal Applications Precision CNC milling Drilling & tapping operations Toolmaking & jig work Small to medium batch production General engineering workshops Why Buy From Used Machine Tools Ireland? Ncedpfx Aijyatkboyeu Trusted Irish supplier of quality used CNC machinery Machines honestly described & professionally inspected Nationwide & export delivery available Competitive pricing Notes: *Specifications are given in good faith but not guaranteed*

Condition: good (used), Year of construction: 2012, maximum machining diameter 380mm, maximum machining length 508mm, bar capacity 74mm, spindle speed 4,000rpm, spindle power 18.5Kw, milling speed 4,500rpm, milling power10Kw, sub-spindle speed 6,000rpm, sub-spindle power 5.5Kw, Ncjdpfxjzaz Uzj Aiyeu Y axis -51/+51mm, 12 station turret, Mazatrol Matrix Nexus control, swarf conveyor, parts catcher , tool setter, 3 jaw chuck and Barfeed unit.

Condition: used, Year of construction: 2001, total height: 2,550 mm, total length: 2,850 mm, total width: 2,400 mm, Colour: White Empty weight: 6.500 kg - Year: 2001 - Documentation available: No Ncsdpfx Aiey Rrdieyeu - CE certificate present: No - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Heidenhain - Control system type: TNC 430 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1000 - Y-axis travel [mm]: 500 - Z-axis travel [mm]: 505 - Table length [mm]: 1150 - Table width [mm]: 470 - Tool holder: BT40 - Max. spindle speed [rpm]: 10000 - Options: Tool magazine, Chip collection tray - └ Tool magazine [pcs.]: 24 - Transport dimensions: 2850mm x 2400mm x 2550mm (l x w x h) - Transport weight [kg]: 6500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1999, operating hours: 9,140 h, total height: 2,750 mm, total length: 2,620 mm, total width: 3,000 mm, Colour: Grey Empty weight: 7.000 kg Price: On request - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 906237 - Operating hours: 9140 - Drive system: CNC Nodoyf E U Aepfx Aiyocu - Horizontal/vertical: vertical - Control system brand: Fanuc - Control system type: 18-M - Number of axes [pcs]: 3 - X-axis travel [mm]: 1020 - Y-axis travel [mm]: 520 - Z-axis travel [mm]: 630 - Table length [mm]: 1200 - Table width [mm]: 550 - Tool holder: BT40 - Main spindle power [kW]: 11 - Max. spindle speed [rpm]: 8000 - Options: External cooling - Transport dimensions: 2620mm x 3000mm x 2750mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), mileage: 282,996 km, power: 309 kW (420.12 HP), first registration: 03/2018, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 3,950 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,850 mm, total width: 2,550 mm, total height: 3,520 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, cruise control, electric window regulation, power mirror, seat heater, traction control, trailer coupling, = Additional options and accessories = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lamp - Short cab - Manual - PTO (power take-off) Ncsdpfex Rnpnjx Aiyeu - Pump - Radio/cassette - Reversing camera - Lane keeping assistant - Fabric - Central lubrication = Remarks = Number of axles: 3, Configuration: 6x2, Unladen weight: 12,245 kg, Gross weight: 28,000 kg, Total tank capacity: 250 liters, Trailer coupler, Kingpin diameter: 40 DIN, Fifth wheel: Fixed, Number of differential locks: 1, Central lubrication, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Colour: Multicolour, Heated mirrors, Reversing camera, Lighting: halogen lamp, Lane keeping assistant, Climate control, Seat heating, Bluetooth, Engine output: 309 kW (414 hp), Fuel: Diesel, Emissions standard: Euro 6, Transmission type: Automatic, Transmission make: ZF, Gears: 12, Power steering, ABS, ASR, PTO, PTO type: 1, Starter battery, Pump, Seat layout: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, Meiller AK 16 NT = Further information = Transmission Transmission: ZF, 12 gears, automatic Axle configuration Tyre size: 315/80R22.5 Brakes: disc brakes Axle 1: Steered; Tyre tread left: 10 mm; Tyre tread right: 7 mm; Suspension: leaf suspension Axle 2: Lift axle; Steered; Tyre tread left: 9 mm; Tyre tread right: 8 mm; Suspension: air suspension Axle 3: Twin mounts; Tyre tread left inside: 14 mm; Tyre tread left outside: 14 mm; Tyre tread right inside: 6 mm; Tyre tread right outside: 13 mm; Suspension: air suspension Weights Unladen weight: 12,245 kg Payload: 15,755 kg Gross vehicle weight: 28,000 kg Functionality Pump: Yes Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial Information Leasing rate: €1,009 per month (default, 60 months); please enquire for further information and terms Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here, you can choose from a continually changing stock of 1,200 used trucks, tractors, and trailers. Our range comprises all European makes, production years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good prices • Professional business conduct • We speak many languages • We understand our customers • Support with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of ‘recognizable quality’ • And much more… Please visit our website for special offers and complete inventory. Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, Price: On request - Documentation available: No Njdpjzg Ddqefx Aiyjcu - CE certificate present: No - Serial number: 23896 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 1997, condition: used, Multi-tool milling unit with pneumatic transfer. Manufacturer: Forplex Model : FNG3 Type: Hammer/pin mill Year: 1997 (2021: full manufacturer retrofit: mechanical, electrical, etc.) Available milling tools: - Pin plate set (rotor / stator) - Hammer plate + sieve ring assembly - Blade plate + sieve ring assembly Capacity : 100 à 3000 kg/h Motor power : 45 kW Door opening safety Pneumatic transfer outlet under the mill Rotor diameter : Ø 440 mm Grid diameter : Ø 450 mm Donaldson Dalamatic DLMV 25/12 filter - Year: 1997 (2021: refurbished by Forplex) - Materials: stainless steel - Filter type: bag filters - Cleaning system: pneumatic - Hopper under filter - Air flow, fan : 7.5 kW - Rotary valve Electrical cabinet - Touchscreen HMI for controlling the entire unit - management of the milling unit - safety management - recipe management - variable-speed drive on the mill motor. Mill dimensions : 225 x 113 x 285 cm Ncodpozfwvwofx Aiyou Weight : 500 kg

Year of construction: 1997, condition: used, Manufacturer: G.B.P Snc ItaliaType: three-roll millMaterials: stainless steelModel: R80Year: 1997Power: 0.37 kW3 cylinders, Ø 80 x 250 mm Ncsdpfx Aisy D Ug Heyeu

Condition: good (used), mileage: 267,931 km, power: 271 kW (368.46 HP), first registration: 03/2016, fuel type: diesel, tire size: 315/89R22,5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro6, suspension: steel-air, total length: 6,960 mm, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2016, Equipment: ABS, central locking, cruise control, electric window regulation, navigation system, power mirror, seat heater, traction control, trailer coupling, = Additional Options and Equipment = - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed - Halogen lights - Hydraulic system - Short cab - Manual transmission - PTO (Power Take-Off) - Pump - Radio/Cassette player - Lane departure warning system - Fabric upholstery = Remarks = Number of axles: 2, Configuration: 4x2, Curb weight: 10,200 kg, Gross weight: 18,000 kg, Total tank capacity: 335 liters, Trailer coupling, King pin diameter: 40 DIN, Fifth wheel: Fixed, Number of differentials: 1, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Electric windows, Electric mirrors, Radio/Cassette, GPS navigation, Color: Multicolor, Heated mirrors, Lighting type: Halogen, Lane departure warning, Seat heating, Warning lights, Engine power: 271 kW (363 hp), Fuel: Diesel, Emissions standard: Euro 6, Transmission: Manual, Gearbox type: ZF, Gears: 16, Clutch pedal, Power steering, ABS, ASR, Hydraulic system, PTO (Power Take-Off), PTO type: 1, Starter battery, Body year: 2016, Hooklift and cable system manufacturer: Overige, System type: AK 13M, Pump, Central locking, Seat layout: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual, MEIER AK13M SYSTEM / MANUAL GEARBOX / ONLY 268 TKM Ncjdpfx Aioyt Dttoyju = Further Information = Transmission Transmission: ZF, 16 gears, manual gearbox Axle configuration Brakes: Disc brakes Axle 1: Tire size: 315/89R22.5; Steerable; Tire tread left: 10 mm; Tire tread right: 11 mm; Suspension: leaf spring Axle 2: Tire size: 315/80R22.5; Twin tires; Inner left tire tread: 10 mm; Outer left tire tread: 10 mm; Inner right tire tread: 9 mm; Outer right tire tread: 10 mm; Suspension: air suspension Weights Unladen weight: 10,200 kg Payload: 7,800 kg gross vehicle weight: 18,000 kg Functionality Pump: Yes Condition Technical condition: Good Visual condition: Good Damages: None Number of keys: 3 Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent used vehicle dealers. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our offer covers all European makes, model years, and price classes. Why buy from Kleyn Trucks? Simple! • Large, fast-rotating inventory • Recognizable quality • Good pricing • Professional business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of “recognizable quality” • And more… Please visit our website for special offers and the full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your lease rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: good (used), mileage: 216,019 km, power: 338 kW (459.55 HP), first registration: 03/2018, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x2, wheelbase: 3,950 mm, fuel: diesel, brakes: retarder, color: black, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,950 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2018, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, retarder, seat heater, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Tachograph (recording device) - Fixed (set) - Halogen lamp - Short cab - Manual - Power take-off (PTO) - Pump - Radio/cassette - Reversing camera - Lane departure warning system - Seat cover - Central lubrication - Additional brake system Number of axles: 3, Configuration: 6x2, Kerb weight: 12,188 kg, Gross weight: 26,000 kg, Total fuel tank capacity: 260 liters, Trailer coupling, King pin diameter: 40 DIN, Fifth wheel: Fixed, Number of differentials: 1, Central lubrication, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Anthracite, Heated mirrors, Reversing camera, Lighting: Halogen lamp, Lane departure warning system, Climate control, Heated seats, Bluetooth, Engine output: 338 kW (453 hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Gearbox: ZF, Gears: 12, Additional brake system, Retarder brand: Intarder, Power steering, ABS, ASR, Power take-off (PTO), PTO type: 1, Starter battery, System type: Meiller AK16, Pump, Central locking, Seating configuration: 1+1, Seat cover: Seat cover, Seat adjustment: Manual, Meiller AK 16 NT Gearbox Transmission: ZF, 12 gears, automatic Axle configuration Tyre size: 315/80R22.5 Brakes: Disc brakes Axle 1: Steering; Tyre tread left: 4 mm; Tyre tread right: 5 mm; Suspension: Leaf spring Axle 2: Lift axle; Steering; Tyre tread left: 11 mm; Tyre tread right: 10 mm; Suspension: Air suspension Axle 3: Twin tyres; Tyre tread left inside: 12 mm; Tyre tread left outside: 10 mm; Tyre tread right inside: 12 mm; Tyre tread right outside: 11 mm; Suspension: Air suspension Weights Unladen weight: 12,188 kg Payload: 13,812 kg GVW: 26,000 kg Functional Pump: Yes Condition Technical condition: good Visual condition: good Damages: none Number of keys: 4 Financial Information Leasing price: €1,064 per month (default, 60 months); Please inquire for further information and conditions Identification Registration number: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range covers all European brands, years of manufacture, and price categories. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Competitive pricing • Fair trading practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Skilled technical services • The security of “recognizable quality” • And more.... Please visit our website for special offers and the complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and request an offer on our website. Nedpfx Aox E Ra Sjiyjcu Ask directly about our European warranty package.

Condition: used, Year of construction: 2019, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 2,000 mm, position of the milling head: 2,5° x 2.5°, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, rapid traverse Z-axis: 25,000 m/min, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 10,000 m/min, feed rate Z-axis: 10,000 m/min, spindle speed (max.): 4,000 rpm, torque: 1,638 Nm, coolant supply: 16 bar, Equipment: documentation/manual, rotational speed infinitely variable, On behalf of our client: Used CNC fixed-bed milling machine Manufacturer: KIHEUNG Model: D-TRAX X5500 Year of manufacture: 2019 Operating hours: • Control system on: 12,578 hours • Program run: 6,742 hours • Spindle run: 4,869 hours STANDARD EQUIPMENT: • CNC control HEIDENHAIN TNC 640 with HSCI, 19" TFT monitor, DXF converter, and swiveling control panel • SIEMENS main spindle motor 28/38 kW • 2-stage, cooled ZF reduction gearbox (1–1,000 / 1,001–4,000 rpm) • X-axis drive via TWIN-DRIVE / REDEX rack and pinion system with two servo motors • Y and Z-axis drive via KORTA precision ball screws • HEIDENHAIN linear scales in all three axes with compressed air system DA 400 • INA precision linear guides in all three axes • Hydraulic counterbalance of the Z-axis using nitrogen pressure cylinders • Automatic central lubrication with pressure monitoring • Telescopic guide covers for X, Y, and Z axes • HEIDENHAIN Teleservice dongle for remote diagnostics • HEIDENHAIN handwheel HR-510 • RITTAL control cabinet with air conditioning and interior lighting • CE-compliant complete enclosure with 15 mm polycarbonate safety glass and four front doors • Rear articulated chip conveyor • Coolant system up to max. 8 bar, tank volume 800 l • Ethernet interface • Paint finish in light gray RAL 7035, carmine red RAL 3002, and slate gray RAL 7015 SPECIAL ACCESSORIES: • Universal automatic milling head A4 – 2.5° x 2.5° (bi-rotating, hydraulic clamping) • Horizontal chain-type tool changer for 30 tools (servo motor with HEIDENHAIN encoder) • CTS system 16 bar – cooling through the spindle with paper band filter system • Oil skimmer HAMMA Germany • Magnetic separator • Stand extension for Z-axis travel of 2,000 mm • Preparation for pendulum machining DELIVERY SCOPE / DOCUMENTS • Machine including all existing options and accessories • Available documentation: operating manual, maintenance manual, lubrication manual, electrical wiring diagrams, CE declaration of conformity, and programming manual INSPECTION / CONTACT • Inspection possible by appointment Ncsdpfx Aiozgw Dwsyeu

Condition: used, Year of construction: 1988, x-travel 1800 mm Ncsdpfx Aiezf Nuxjyju y-travel 700 mm z-travel 1200 mm ja 2 control Heidenhain 155 table: 700-2000 mm documentation ja dismantled ja weight of the machine ca. 12,5 t

Condition: used, Year of construction: 1978, x-travel 1.000 mm y-travel 340 mm z-travel 450 mm table: 1.300 x 400 mm spindle taper ISO 40 SK turning speeds 32 - 1.400 U/min spindle stroke 80 mm total power requirement 7,5 kW Features: - Universal console milling machine with HEIDENHAIN digital display - Mechanical tool clamping - Cooling system - Various SK 40 tool holders - Machine documentation in German Ncjdjzf Nrdjpfx Aiyeu

Condition: used, Year of construction: 2012, x-travel 0760 mm y-travel 845 mm z-travel 760 mm control 840DI Siemens table-size 500 x 500 mm feed 0- 60 m/min workpiece weight max. 350 kg type of pallet-changer 4 St. milling head speed 12000 U/min numbers of tools in magazin 320 Nodpfx Aoywntgjiyjcu tool taper 63 HSK A- axe (swivel) 30- 120 ° B- axe (turning) 360 ° total power requirement 83 kW weight of the machine ca. 15 t dimensions of the machine ca. 6 x 4 x 2,5 m 5 axes machining center with swivable and turnable table. Coontrol Siemens 840 DI. Machine will be supplied with many spare parts. Machine has cooling through spindle, dust exhaust and a 4 pallet exchange storage. We will deliver a measuring tracer along with the machine.

Condition: used, Year of construction: 1993, x-travel 0500 mm y-travel 400 mm z-travel 420 mm table-size 800 x 400 mm Njdpfx Aijyy A Dxjyjcu feed range 1- 3000 mm/min rapid traverse 0,083- 5 m/min Tool bore ISO 40 turning speed range 20- 4000 U/min main drive DC 5 kW CNC control 355 HH total power requirement 10,9 KW weight of the machine ca. 2300 kg dimensions of the machine ca. 2,5 x 2,5 x 2,0 m CNC milling machine with Heidenhain TNC 355 Control and housing arround working area.

Condition: used, Year of construction: 2008, x-travel 1250 mm y-travel 1000 mm z-travel 1000 mm control Matrix Ncedpfxoywntme Aiyju max. workpiece diameter 1060 mm workpiece length - max. 1000 mm chucking diameter 800 mm type of pallet-changer 2 St. milling head speed 10000 U/min table turning speeds 500 U/min numbers of tools in magazin 120 tool taper 50 ISO table drive 37 kW milling drive 37 kW total power requirement 110 kW weight of the machine ca. 37 t dimensions of the machine ca. 5 x 4 x 3 m Milling and turning machine with 5 axes. Control: Mazatrol Matrix. Machine has coolant through spindle with mist exhaust and is prepared for Renishaw OMP.

Condition: used, Year of construction: 2006, x-travel 1250 mm y-travel 1000 mm z-travel 1000 mm Nedpfeywntajx Aiyocu control 640MPlus max. workpiece diameter 1060 mm workpiece length - max. 1000 mm chucking diameter 800 mm type of pallet-changer 2 St. milling head speed 10000 U/min table turning speeds 500 U/min numbers of tools in magazin 80 tool taper 50 ISO table drive 37 kW milling drive 37 kW total power requirement 110 kW weight of the machine ca. 36 t dimensions of the machine ca. 5 x 4 x 3 m Milling and turning machine with 5 axes. Control: Mazatrol 640 MPlus. Machine has coolant through spindle with mist exhaust and is prepared for Renishaw OMP.

Condition: new, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, workpiece weight (max.): 6,000 kg, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, LAGUN BM 3RT bed-type milling center with rotary table – available for short-term delivery Nodpfx Aohy At Aeiyecu The LAGUN BM 3RT is a highly stable bed-type milling center with a rotary table for heavy and precise machining. Ideal for single-part production as well as series production with the highest requirements for rigidity, accuracy, and reliability – all without complex foundation work. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust design, high dynamics, and decades of experience in the construction of bed-type milling machines. The machines impress with their high reliability, ease of maintenance, and economical operation. Technical features: Control system: HEIDENHAIN TNC 640 contour control HEIDENHAIN 19" TFT screen HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 40-position chain magazine with dual gripper Chip disposal: Double-hinge belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Your advantages with JMT: ✔ Official LAGUN distribution partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and prepare a customized offer.

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,200 mm, table load: 6,000 kg, table length: 1,600 mm, torque: 1,178 Nm, power: 31 kW (42.15 HP), Equipment: rotational speed infinitely variable, LAGUN BM 2RT bed-type milling center with rotary table – available for short-term delivery The LAGUN BM 2RT is a highly stable bed-type milling center with a rotary table for heavy-duty and precision machining. Ideal for single-piece production as well as series production with the highest requirements for stiffness, accuracy and reliability – and all this without complex foundation work. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock Njdeff Hz Hepfx Aiyocu ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24 months warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust design, high dynamics and decades of experience in the construction of bed-type milling machines. The machines impress with their high reliability, ease of maintenance and economical operation. Technical specifications: Control system: HEIDENHAIN TNC 7 control HEIDENHAIN 19" TFT screen HEIDENHAIN motors, measuring systems and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 40-position chain magazine with double gripper Chip disposal: 2 x articulated belt conveyors (front and rear) Enclosure: Full enclosure (perimeter) Accuracy: Positional accuracy: ± 0.015 mm Repeatability: ± 0.008 mm Your advantages with JMT: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and prepare an individual offer.

Condition: new, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, spindle speed (max.): 6,000 rpm, table width: 1,100 mm, table load: 14,000 kg, table length: 5,100 mm, overall weight: 35,000 kg, torque: 1,178 Nm, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, LAGUN BM 5 Bed Milling Machine The LAGUN BM 5 is a highly stable bed milling machine designed for heavy-duty and precision machining. It is ideal for single-part production as well as series production with the highest requirements for stiffness, accuracy, and reliability – and all without requiring extensive foundation work. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction for operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust construction, high dynamics, and decades of experience in the construction of bed milling machines. The machines offer high reliability, ease of maintenance, and economical operation. Technical specifications: Control system: HEIDENHAIN TNC 7 control HEIDENHAIN 19" TFT screen HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 24-position drum magazine with double gripper Chip disposal: 2 x hinged belt conveyor (front and rear) Ncedpsq Ixh Hjfx Aiysu Preparation: Preparation for 4th axis (rotary table optional) Enclosure: Full enclosure (perimeter) Accuracy: Positioning accuracy: ± 0.025 mm Repeatability: ± 0.008 mm Your advantages with JMT: ✔ Official LAGUN sales partner in Germany ✔ Technical support and on-site service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and prepare an individual offer for you.

Condition: new, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 2,000 mm, position of the milling head: Universal-Diagonal-Fräskopf, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, spindle speed (max.): 6,000 rpm, pivoting range: 1 °, table length: 7,500 mm, table width: 1,100 mm, torque: 1,178 Nm, table load: 42,000 kg, coolant supply: 36 bar, spindle motor power: 53 W, Equipment: rotational speed infinitely variable, LAGUN CM 6 Traveling Column Milling Machine – available for short-term delivery The LAGUN CM 6 is a highly dynamic traveling column milling machine for the precise machining of large and complex workpieces. Ideal for single-part production as well as series production with the highest requirements for accuracy, stability, and flexibility. Your advantages at a glance: ✔ Delivery and commissioning by JMT technicians included ✔ Original spare parts available directly from stock ✔ Technical support and on-site service in Germany ✔ Training and instruction for the operating personnel included ✔ Financing and lease-purchase options available upon request ✔ 24-month warranty Why LAGUN: LAGUN is one of the leading machine tool manufacturers in Spain (MAHER HOLDING) and stands for robust design, high dynamics, and decades of experience in the construction of milling machines. The machines impress with their reliability, ease of maintenance, and economical operation. Technical equipment: Control: Two HEIDENHAIN TNC 7 digital path controls – one on the front of the machine and one at the rear in the cabin 2 x HEIDENHAIN TFT screens 19" HEIDENHAIN motors, measuring systems, and electronic handwheel HR-510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: Automatic tool changer (ATC), 60-position Chip disposal: Hinged belt conveyor Preparation: Preparation for rotary table / 4th axis Enclosure: Three-sided perimeter enclosure Accuracy: Positioning accuracy: ±0.040 mm Repeatability: ±0.008 mm Your advantages as a JMT customer: ✔ Official LAGUN distribution partner in Germany ✔ Technical support and on-site service ✔ Fast availability of spare parts Ncsdpsvrv Sujfx Aiyju ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we will be happy to advise you and prepare an individual offer.