Used Portal Measurement Machine for sale (68,006)

Condition: excellent (used), Year of construction: 2000, x-travel 3000 mm y-travel 1400 mm z-travel 1600 mm control DEA B3C-LC workpiece weight 4500 kg table surface area 4730 x 1465 mm tool taper RENISHAW PH10M weight of the machine ca. 4 t Ljdpjxb Eg Nsfx Al Ijhh dimensions of the machine ca. 4 x 3,8 x 3 m

Condition: excellent (used), Year of construction: 2002, x-axis 4000 mm y-axis 3500 mm z-axis 1500 mm Control SIEMENS 840 D w-axis 1500 mm column daylight 2500 mm surface area 3000 x 2000 mm workpiece weight 10000 kg spindle turning speed range 5-6000 U/min transmission ratio 2 power capacity - milling spindle 45 kW dist. cutter spindle - workpiece spindle 3500 mm max. torque on the spindle 1250 Nm tool change unit 200 -fach tool diameter 135 / 250 mm weight of tools max. 50 kg tool length - max. 400 mm tool taper ISO SK-50 the portal milling machine is in very good condition. ADDITIONAL EQUIPMENT DRILLING/MILLING Lsdsvwgmmepfx Al Iohh Angle milling head yes automatic tool clamping yes Tool clamping yes Ball screws yes Guideway cover yes Coolant system yes High-pressure cooling system (internal cooling) yes Full work area panelling yes Portal machining centre with tool changing system and second table top.

Condition: used, 3-D coordinate measuring machine ZEISS NUMEREX - non-functional Granite measuring table, granite measuring plate, measuring table Model No. 3648-18, Serial No. X-1019, Year of manufacture approx. 1986 Ljdpfefy U Ewox Al Ishh Measuring range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring plate L x W 1525 x 1435 mm Usable area 1525 x 1100 mm Measuring plate thickness 305 mm Passage width in the portal 1100 mm Measuring probe mount Ø 9.5 mm Compressed air connection 6 bar Mains connection 230 Volt, 50 Hz - Granite plate with steel inserts with internal thread - Axis adjustment with pneumatic sliding guide for X, Y and Z axis - Plate on substructure with 5 adjustable feet, 3 support plates for the adjustable feet - Computer and software missing (not included and not part of the scope of delivery) → non-functional! Space requirement of the measuring machine L x W x H 1600 x 1850 x 2200 mm Weight of the machine approx. 2.8 tons Plate damaged on one side, see picture, otherwise in good condition.

Condition: used, Year of construction: 1998, Technical details: x-travel: 870 mm y-travel: 870 mm z-travel: 800 mm Ledpfxsu N At Rj Al Ijhh table surface area: BxT: 1.260 x 1.050 mm distance between columns: 1.260 mm Laser measuring system with ZETT3D geometry program The table is made of granite and has 48 mounting holes M6 integrated. With interface module Renishaw type P14-2 On machine is currently installed a shaft with probe pin 60mm (without extension) Probeset Renishaw type PH-1 stored in a wooden box. Operation manually, operated control panel with 2 control knobs, keyboard and 4-line LCD display. Accessories: various probe tips and extension, calibration ball Printer Computer (Software Windows NT) Last calibration was at 06/2006. *

Condition: used, Year of construction: 2002, Technical details: x-travel: 505 mm y-travel: 405 mm z-travel: 405 mm measuring range X-axis: 505 mm measuring range Y-axis: 405 mm measuring range Z-axis: 405 mm compressed air: 0,4 MPa voltage: 100/120/220/240 V / Hz total power requirement: 700 Watt machine weight approx.: 0,5 t dimension machine xH: 1,1 x 1,1 x 2,185 m further features: -it is a linear measuring system with resolution 0.0001mm -measuring speed X/Y+Z-axes 430 mm/s -acceleration X/Y+Z-axes 980 mm/s² Lhjdpfou S Izcsx Al Ijh -measuring table made of granite, size LxW: 638 x 860mm, with workpiece clamp -max. tool size height max. 545mm weight max. 180kg Equipment: -Measuring probe Renishaw TP200 -Computer Fujtsu - Siemens Scenic P; protection class IP30 -without measuring probe -Software available (USB Stick) *

Condition: used, Year of construction: 2019, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MG 4501.20 BkP Lhsdpfx Aoyay H Ael Ioh Year of manufacture: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source, including Optimix gas console 1 x Drilling spindle 26 kW, up to 40 mm diameter, including 8-position tool changer 1 x Preparation for retrofitting a rotator (for bevel cuts) 1 x Nesting program on the CNC control ä3626 Availability: May 2026

Condition: used, Year of construction: 1978, machine/vehicle number: 27309654, x-travel:1600 mm y-travel:1000 mm Lhsdpfx Aecxxwrjl Ieh z-travel:1300 mm size of plate:1.500 x 800 x 120 mm capacity Y-axis:175-1210 mm capacity Z-axis:0-810 mm digital readout:Grundig 3-achs-Digimeß digital readout:235 x 80 x 130 mm total power requirement:0,04 kW weight of the machine ca.:2 t dimensions of the machine ca.:2,0 x 1,5 x 1,63 m 3-D coordinate-measuring machine with caste precision plate fine-scraped, with 4 feet 2000 x 1500 mm, approximately 20 different marking and testing probes, equipped with STIEFELMAYER type "A" guidance system

Condition: used, Year of construction: 1991, table length:1500 mm table width:1000 mm daylight:800 mm Ledpfx Aocxxwujl Ijhh measurement range X =:1400 mm measurement range Y =:1000 mm measurement range Z =:800 mm weight of the machine ca.:1,6 t dimensions of the machine ca.:2,0 x 1,8 x 2,1 m 3-D coordinate-measuring machine, caste measuring plate with finely machined surface with T-slots, ZETT-MESS evaluation computer system, EPSON-statistical printer, machine equipped with temperature stabilizing heating and video camera, for TV-transmission of microscope-picture capture, additive cold light source with two flexible fibre optics, Sony-Mavica video printer, good condition

Condition: used, x-travel:600 mm y-travel:fest mm z-travel:650 mm weight of the machine ca.:ges. 0,124 t dimensions of the machine ca.:0,7 x 1,0 x 1,05 m surface measuring, testing and evaluating unit for roughness and unevenness parameters with measuring post and feed device, incl. data logger with profile memory and full digital measured-value processing, fully programmable, evaluation according to different evaluation programs with single measuring run, reference-plane measuring on badly aligned, curved and tilted surfaces, automatic correction of height offset and tilt, measuring program with permanent storage and quick access, clearly arranged control elements, universal by plug-in program module for special functions, measuring post PST-Se, large black granite base plate with a 14 mm T-slot, table 650 x 450 mm, PRK feed device, adaptable precision scanning device for roughness, unevenness and form measuring, tracing length 1,5-60 mm, guidance accuracy 2 µm, tracing speed 0,5 and 0,1 m/s, automatically adjustable, return speed 1,5 m/s, standard - interval and terminal contact operation, extensive accessories, exchange calliper, calliper height-adjustable, calliper holder, calliper, etc. Lodpfx Aecxxrgol Ijhh

Condition: used, Year of construction: 1983, machine/vehicle number: 16340283, table length:2000 mm table width:1000 mm weight of the machine ca.:2,9 t Novalyth stone table with integrated T-groove, Grundig MZ 1030 measuring computer, 5 height-adjustable feet. Ledscxxzispfx Al Iohh

Condition: like new (used), Year of construction: 2022, operating hours: 250 h, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 2,000 mm, measuring range Z-axis: 800 mm, workpiece weight (max.): 1,800 kg, total height: 3,150 mm, total width: 3,255 mm, total length: 1,600 mm, travel distance X-axis: 900 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, overall weight: 4,500 kg, table width: 1,475 mm, table height: 700 mm, table length: 2,830 mm, feed length X-axis: 900 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 800 mm, table load: 1,800 kg, ambient temperature (max.): 22 °C, ambient temperature (min.): 18 °C, maximum load weight: 1,800 kg, Machinery purchased in 2022 and used for only 250 hours, offered for sale due to business closure. Lsdpfx Ajzdnw Nel Iohh In like-new condition. Technical specifications are attached.

Condition: like new (used), Like new. Compatible with Polyworks software. A very beautiful and elegant 3D CNC measuring machine, the Renishaw Equator 300, offered at an attractive price. Three-dimensional comparison with an accuracy of two micrometers! Measuring volume: X and Y axis ø 300 mm – Z axis 150 mm. Resolution: 0.0002 mm. Scanning rate (SP25): 1000 points per second. Scanning speed: 200 mm per second. Maximum traverse speed: 500 mm per second. Operating temperature: +5 to +50 °C. Maximum power consumption: 190 watts. Maximum workpiece weight: 25 kg. Machine weight: 25 kg. Height: 700 cm. Width: 570 cm. Length: 500 cm. No compressed air required. SP25 SM25-1. 6 x SH25 probe heads Wecksler for 6 probes. MODUS™ IM DMIS software & license key. Renishaw control PC, monitor, mouse & keyboard. (Also controllable with Polyworks). The starting bid for the offered configuration is €5,000. Ledpjy S Dbcefx Al Iohh

Condition: ready for operation (used), Year of construction: 1992, X-axis: 700mm, Y-axis: 600mm, Z-axis: 450mm, measuring system: linear encoder, resolution: 0.001mm, max. workpiece weight: 500kg, max. workpiece dimensions: 500x500x500mm, compressed air connection: 5bar, mains connection: 220V/50Hz, weight: 1.15t, software: Mitutoyo GEOPAK 3 MAN, Mitutoyo SCANPAK 3 v3.01 MAN, equipment: PC with monitor, keyboard and control unit, measuring probe with accessory case, clamping devices and further accessories, operating manuals and documentation available, condition: fully functional, software runs perfectly, regularly serviced, calibration carried out before trade fair use, no known defects. An inspection on site is possible. Lsdpfxszbl Nro Al Iohh

Condition: excellent (used), Year of construction: 2013, operating hours: 64,269 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 20,000 rpm, overall weight: 30,000 kg, For sale is a well-maintained Parpas Diamond Linear. – C-axis (milling head): (degrees) +/- 370 – A-axis (milling head): (degrees) +/- 105 Distance between columns: (mm) 2,700 Distance between table surface and spindle nose with milling head mounted, max.: (mm) 1,220 – X and Y axis rapid traverse: (m/min) 60 – Z axis rapid traverse: (m/min) 40 Spindle: 5-axis orthogonal milling head – Internal coolant supply (ICS): (bar) 20 – Maximum spindle speed: (rpm) 20,000 – Drive power S1 / S6: (kW) 29 / 37 – Torque S1 / S6: (Nm) 92 / 115 Ljdpfsxxvp Nox Al Ijhh Tool magazine – Tool holder: HSK 63 A – Tool positions: 42 – Tool diameter: (mm) 80 – Tool length: (mm) 350 – Tool weight: (kg) 6 Machine table – Table size L x W: (mm) 2,300 x 1,600 – T-slot spacing: (mm) 200 – T-slot dimensions: (mm) 22 – Max. workpiece weight: (kg/m²) 6,000 FEATURES & EQUIPMENT + Heidenhain iTNC 530 control + Portal (gantry) design: U-shaped "monoblock" construction with one crossbeam and stationary workpiece + Milling head (A- and C-axis), A-axis with torque motor and hydraulic clamping, A-axis positioned perpendicular to the C-axis + No foundation required + Glass scales in X, Y, and Z linear axes + C-axis with Heidenhain angle measurement system, resolution 0.001 degrees + Heidenhain HR 520 electronic handwheel + 2 chip conveyors (one at the front and rear of the table) + Internal coolant supply (ICS) 20 bar + Paper filter unit + Sliding roof with opening for loading and unloading

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: type plate available, Taylor Hobson Talyrond 265 roundness measuring device. Extremely precise, it can measure the roundness of lenses, optics, piston turbine parts, tubes, shafts, but also eccentricity, e.g., of cams on a camshaft or journals of a crankshaft; it is certainly also of interest to motorsports and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog; this is what it looks like, except for the computer, which is a newer, smaller-form-factor HP model. Lhjdpfx Aezcqy Eol Ieh Max. diameter 350mm Max. test piece height 500mm (higher measurements can be taken in two parts, up to a maximum of 1000mm...) Self-centering of the workpiece +/- 5mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg; it was used in a "medically clean environment," and it is extremely clean. It has never been in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measuring software is of course included and runs on the supplied HP computer (without a password...). Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) is included for calibration! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped by freight forwarder on two Euro pallets. It is already well secured on them. The Talyrond 265 and the desk will be wrapped with bubble wrap, etc., and with stretch film to provide maximum protection for transport; the system itself is fixed with "transport safety screws." Shipping costs within Germany are included; I will cover them! So, within Germany: FREE SHIPPING! The measuring system should definitely be assembled and put into operation by a Taylor Hobson service technician, who can then recalibrate the system on-site; this is recommended after a few years. It is possible to make mistakes during assembly and commissioning. For example, there are several locking screws installed for transport; if you forget them, the system may be damaged when it starts up. This is a truly well-maintained, very precise system that will continue to provide excellent service for many years to come!

Condition: like new (used), Year of construction: 2008, operating hours: 200 h, functionality: fully functional, travel distance X-axis: 1,015 mm, travel distance Y-axis: 1,015 mm, travel distance Z-axis: 200 mm, CNC milling machines are operated using a special software program (CAD/CAM), which enables the precise processing of various materials such as metal, plastic, foam, stone, or wood in a short amount of time. The drawing or model created using the software generates the manufacturing process. This allows, for example, the milling of a prototype or the start of production for a series of standard parts. Once the design is complete, the CNC control system takes over the task of moving the horizontal and vertical axes during the entire machining process. The milling machine's motor can be switched on directly when the computer program starts, under the supervision of the operator. This enables them to efficiently perform a large number of cutting, engraving, surface milling, or drilling operations by removing material from the surface or in depth, to produce complex parts with high precision. Digital milling technology enables operations with a high degree of end-product quality, a reduced risk of wear on the machined parts, and increased reliability, as the fragility of the manufactured products is reduced, even for parts with small dimensions or diameters. Thanks to an improved configuration of the work steps, it offers the advantage of increasing production speed while maintaining optimal manufacturing quality. Note: Sold without warranty or guarantee. We assume no liability for the operational functionality of the machine. The sale is made excluding any liability for material defects, to the extent permitted by law. Lhjdpfxsvaxunj Al Ieh

Condition: good (used), Year of construction: 2010, functionality: fully functional, measuring range X-axis: 250 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, Software: QVPAK V10.005 Lhsdpfsu Sqmdex Al Ish

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, TECHNICAL DATA Accuracy: from 3.0 + L/250 µm Lhodpfx Alsyr Simo Ieh Measuring range X-axis: 3,500 mm Measuring range Y-axis: 6,000 mm Measuring range Z-axis: 2,000 mm Type of input current: Three-phase Equipment: Lighting, documentation/manual, nameplate available Details of the offer Description Portal measuring machine Manufacturer: Mora Type: U204-20-35-60 Measuring software: Manufacturer Gemodek, Type MS10 Control panel on wheels Measuring and evaluation unit 2 PCs, Manufacturer HP, Type XW4300/Z220 2 monitors, 19/24", Roller shutter cabinet, telescopic drawer cabinet, Manufacturer Lista, W 1,000 mm, 7 drawers. Contents: Infrared measuring probe, Manufacturer Renishaw, Type PH10M, Calibration mandrel, accessories

Condition: defective spare-parts repository (used), functionality: limited functionality, Dear Sir or Madam, We hereby offer you the following device for sale: Keyence XM-1200 coordinate measuring machine. Lodpfxjyrcx Sj Al Iohh The device is defective and currently not operational. The machine is sold with the equipment documented in the photos and specified in the advertisement text. Location: 40764 Langenfeld ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 13 May 2026. After the auction ends, you will be informed of the auction result within 72 hours.

Condition: used, functionality: unexamined, Dear Sir or Madam, We hereby offer you the following device for sale: Keyence WM-C3000 coordinate measuring machine. The machine is sold with the equipment documented in the photos and specified in the advertisement text. Lhodpfeyrcx Ejx Al Ioh Location: 40764 Langenfeld ATTENTION! The device originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information about the current highest bid. Your bid becomes binding upon receipt by email. Please send us your binding bid by 10 a.m. on 13 May 2026. After the auction ends, you will be informed of the auction result within 72 hours.

Condition: used, functionality: unexamined, Dear Sir or Madam, We are pleased to offer the following machine for sale: Keyence XM-5000 coordinate measuring machine. The machine is sold with the equipment shown in the photos and listed in the advertisement text. Location: 40764 Langenfeld PLEASE NOTE! The equipment originates from an insolvency. We are auctioning this off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information regarding the current highest bid. Your bid becomes binding upon receipt by email. Ledpfx Aloy Iaayo Iohh Please submit your binding bid by 10:00 am on 13 May 2026. Once the auction has ended, you will be informed of the outcome within 72 hours.

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: Seriennummer 90319000000, measuring range X-axis: 500 mm, measuring range Y-axis: 300 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, The following components: XM-5000A 3D measuring system / serial number 9031900000. 2 measuring probes. LAPTOP for the XM production measuring system with measuring software on Windows 11. Measuring table for the production measuring system. User manual in German. Measuring range: X: 500 mm, Y: 300 mm, Z: 200 mm Measuring accuracy: (7+9L/100) micrometres Repeatability: ± 3 micrometres Lhjdpfxjyi E Ikj Al Ieh The system was only used for a specific measuring application for measuring parts in special purpose machine construction. No use in production. The system was delivered on 20.06.2024 directly from Keyence.

Condition: used, Year of construction: 2002, Used coordinate measuring machine, manufacturer: Mitutoyo, model CRT-A 122010, year of manufacture: 2002, serial number: N0001301. Machine features: - PC and software - Probe set (as shown in pictures) - Control: JSBOX-M Type A - Renishaw probe head PH10MQ / TP200 - Control unit UC240H A set of transport locks is included with the machine. Last calibration date: 12/09/2024 Quantity: 1 Condition: Used Asset location: Schaeffler Ultra Precision Drives GmbH i. L. Ohsener Str. 79 – 83 31789 Hameln, Germany Delivery terms: EXW (Incoterms 2020) Sale on an "as-is, where-is" basis, ex location. The buyer is fully responsible for dismantling and removal of the equipment. Maynards can suggest a dismantling supplier upon request. Ljdey N Rinepfx Al Ijhh Payment terms: Immediately after receipt of invoice. If any surcharges apply, further information will be provided on the invoice. Seller: Maynards Europe GmbH Maynards sells and invoices the item on behalf and in the name of the stated seller.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Keyence XM-T2000 coordinate measuring system from 2021, in excellent and fully functional condition. Keyence XMM-1600 controller included. Additional accessories: Keyence case, dongle, user manual, and certificates. Measuring range: 300 mm × 250 mm × 150 mm Smallest display unit: Distance: 1 μm, Angle: 0.0001 degrees Measuring accuracy: Repeatability: ±3 μm, Measurement deviation: ±8 μm Maximum load capacity: 25 kg Lhjdpfx Asx H T H Dol Ijh #8406

Condition: good (used), Year of construction: 2015, functionality: fully functional, Hexagon Metrology Optiv Classic 432 coordinate measuring machine in good, fully functional condition. Measuring range (single sensor): 400x300x200mm Dimensions: 1232x910x1663mm Weight: approx. 800kg Maximum workpiece weight: glass plate approx. 30kg Lhsdpex H T Emofx Al Ijh Accuracy: MPEE = 2.9 + L/100 [μm] No additional software included. A PC is provided, but it is unknown to what extent the PC-DMIS 2020 R1 software can still be used.