Used Poly Clip for sale (2,282)

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Rcsdpovviytefx Aa Eok Storage location: Nattheim

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, power: 30 kW (40.79 HP), Extraction system, extraction plant Rsdpfx Aox E Atdsa Eock Höcker Polytechnik Year of manufacture: 2012 Volume: 20,000 m³ Motor: 30 kW with briquetting press BrikStar c-3 18 Vacuum/underpressure

Condition: good (used), Year of construction: 2021, total length: 4,500 mm, total width: 1,200 mm, total height: 2,300 mm, Make Polyglass Rodpfxex Dtiks Aa Eock Type: LV160-CX R-L Info: R-L H-1600 mm Sealing table Tilting table Dimension L 8500 x D 1200 x H 2300 mm

Condition: used, Year of construction: 2017, Design of intake nozzle: right Intake nozzle diameter: 350 mm Rated air flow: 6927 m³/h Max. air flow: 8600 m³/h Filter area: 35 m² Cleaning: pneumatic – jet cleaning Extinguishing system: powder extinguisher Chip disposal: 4 collection containers Collection volume: 495 liters each Filter material: polyester needle felt Negative pressure at rated flow: 3100 Pa Negative pressure at max. flow: 2000 Pa Installation: mobile Approx. weight: 1100 kg Motor power: 15 kW Power connection approx.: 400 Volt/50Hz Storage location: Rcsdsx Iv S Eopfx Aa Esk

Condition: used, functionality: fully functional, Lammers fan, 5.5 kW, with 4 bag discharge filters. Available from the end of September! Rcedsw E Iqzepfx Aa Ejk

Condition: used, Höcker Polytechnik paint booth consisting of: * Spray booth approx. 3 x 2.5 m * Air supply duct * Heat exchanger * Explosion-proof lamps. Rcedpfexvb Sqsx Aa Esk Technical specifications: on demand

Condition: excellent (used), Here we offer Polychromix Phazir NIR spectrometer. Portable Near Infrared Analyzer Model: 1624 Specifications Spectral range: 1600-2400 nm. Redpfxen Arm Tj Aa Esck Pixel pitch 8nm Optical resolution 11nm Scattered light

Condition: good (used), Year of construction: 2012, ASPIRATION POLYTECHNIK VACUMOBIL VT 160-L 1950m3/h, 2.2kW motor Can be installed in the work area (depending on dust type) Low residual dust concentration in return air < 0.1 mg/m³ (H3) according to TRGS 553 Closed air circuit, 100% utilization of thermal energy Large collection capacity with 1 mobile bin Height less than 2 m (intake mouth height center: 1.5m) Programmable control with automatic start (potential-free contact) No rupture vent required for St1 dusts IFA-certified filter media (retention rate 99.95%) Low energy consumption, high suction power IE3 motor, energy efficient Rcjdpfxjxzt Sts Aa Ejk Automatic filter bag cleaning

Condition: excellent (used), Year of construction: 1998, I sell Polymac Rubber edgebander little used, like new. Redpfx Ajuvdzuea Ejck

Condition: used, Year of construction: 1996, Inlet diameter: 160 mm. Nominal air volume flow: 1900 m³/h. Max. air volume flow: 2050 m³/h. Filter area: 9.2 m². Filter cleaning: shaker motor. Chip disposal: 1 collection bin. Collection volume: 200 liters. Filter material: polyester needle felt. Vacuum at nominal flow: 2580 Pa. Installation: mobile. Motor power: 3 kW. Electrical connection approx.: 400 V/50Hz. Storage location: Rsdpfx Asx Hwqtea Eock

Condition: good (used), Year of construction: 2017, Dust suction hood 250 mm Motor output 5,5 kW Rcedpfxjxzuxns Aa Ejk Dimensions (L/W/H) 2.650 x 1.030 x 2.500 mm

Year of construction: 1998, condition: used, Shrink wrapping machine for shrink wrapping of 6 or 12 pcs. Bottles with manual carton tray feeding or also usable without trays (only with foil) Redpfx Aaeb Im Tts Ejck

Condition: excellent (used), Extraction / Mobile dust extractor Vacumobil EA160A Extraction diameter: 160 mm Year of manufacture: 2006 Weight: 310 kg Rated air flow: 2050 m³/h Minimum air flow: 1447 m³/h Rcsdpfx Aerbiiwoa Eok 3.4 kW Automatic, motor-driven filter cleaning

Condition: used, Year of construction: 2016, Höcker Polytechnik extraction system Vakumobil 300 Year of manufacture: 2016 7.5 kW motor 300 mm pipe connection Pneumatic filter cleaning Operating pressure 4.5 - 5 bar 4 chip containers with new bags Including control unit for electric slide valves Rcedpfxoxrwpqe Aa Ejk Automatic energy optimization Dimensions 3500 x 1000 x 3700 mm Weight 900 kg

Condition: excellent (used), Year of construction: 2006, operating hours: 9,728 h, functionality: fully functional, machine/vehicle number: 431-92, total length: 970 mm, total width: 710 mm, total height: 950 mm, overall weight: 330 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, power: 6 kW (8.16 HP), warranty duration: 6 months, Equipment: documentation/manual, The Polyair dry centrifuge is used for gentle, spotless, and residue-free drying of small bulk parts. It features slow acceleration and deceleration, thus preventing the components from scratching against each other during the drying process. The Polyair can handle loads of up to 50 kg. The Polyair offers the following features/technical specifications: - Load capacity: 50 kg - Thermostat adjustable from 0 to 80°C - Adjustable rotation speeds: 200/400/600/800/1000 rpm - Adjustable drying time: 1–10 minutes Rcjdpfxjx Elphj Aa Ejk Accessories such as fabric inserts and baskets are available from us.

Condition: used, Year of construction: 2025, As-new demonstration unit! List price €8,200, including control panel (operator side), pressure regulating valve LR 1/2. The key design features are: galvanized steel sheet construction; space-saving due to compact design; ATEX-compliant; FSA-tested for pressure shock resistance; low energy consumption with high performance thanks to high-efficiency clean-air fan fitted with special impeller; two large-capacity collection containers with liner bags, collection volume 350 l; high operational safety and extended service life due to BGIA-tested filter bags; compressed air pulse cleaning (‘jet’ cleaning) with time-dependent control for filter surface regeneration; Alpha control system with automatic start (slide control available for a surcharge); connection cable, 5 m long, with plug; residual dust content in exhaust air below 0.1 mg/m³; passed GS-H0-14 "GS-H3" test. Suction nozzle arrangement: left. Rated air flow*: 1,447 m³/h; max. air flow: 1,900 m³/h. Negative pressure at interface (at rated air flow): 3,500 Pa; (at max. air flow): 2,700 Pa. Filter surface: 10 m². Suction nozzle: 160 mm. Motor – fan: 2.2 kW, 400 V, 50 Hz, IE3. Collection volume: approx. 350 liters. Compressed air connection: 1" (on-site). Sound pressure level: 72.0 dB(A). Dimensions (L x W x H): 1,840 x 1,020 x 1,990 mm. Location: Rcsdpfx Aaox Hwqge Eek

Condition: used, functionality: fully functional, Polymer Laboratories PL-ELS 1000 Evaporative Light Scattering Detector. Laboratories is a completely new design of high sensitivity Evaporative Light Scattering (ELS) Detector for HPLC, microHPLC and GPC/SEC. Rcedpfxet Uk Dme Aa Eok This ELS detector has replaced the RI for the detection of solutes with no UV chromophore, giving enhanced performance with the benefits over an RI of improved sensitivity, excellent baseline stability, gradient compatability, and providing a positive response for all solute/solvent combinations. Features: -Small footprint for laboratory convenience -Improved sensitivity -Low dispersion -Excellent baseline stability -Wide gradient compatibility -Rapid equilibrium -Detection of even relatively volatile compounds -The PL-ELS 1000 from Polymer Good working condition. Please check out our other listings as well.

Condition: excellent (used), Year of construction: 2008, operating hours: 3,520 h, functionality: fully functional, briquette diameter: 65 mm, Equipment: emergency stop, Briquetting Press Höcker Polytechnik - Model Brik Star C11-18 - Year of manufacture 11/2008 - Throughput capacity 130 - 160 kg/h - Operating hours 3520 - Motor 11 kW - Operating manual Rjdoxztgdjpfx Aa Esck - Conical discharge with auger - Additional oil cooler - Light barrier - Test run on site possible upon request

Condition: used, Year of construction: 1989, stroke 600 mm hydraulic ja keins dabei Redpfx Ajw Sykfea Esck weight 3,7 t

Condition: ready for operation (used), Features: automatic edge guidance for high quality roll presentation, measuring function, large inspection area, cut length function, foot operated on off switch, speed control, reverse capability, emergency stop, locking wheels allow easy movement. Cradle: with 6 rollers, max. roll width: 1800mm, inspection surface: 600mm, max. re-roll diameter: 400mm, operating speed: 0-45m/min, motor: 1x230V/50Hz, 1x120V/60Hz, length: 2450mm, width: 1500mm, height: 1110mm, weight: 302kg. Condition: counter not connected, was removed, switch for the backlight is missing, on off switch is missing, foot pedal for start/ stop is missing, cutting knife is missing. Operating hours unknown. An on-site inspection is possible. Rcedpfx Aasxz Ew Uj Eek

Condition: used, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781/1L50 FR Serial-No. 1793 Heftdicke / Staple thickness 0-8mm Heftarmlänge / Staple Arm length 50cm Heftarmbreite vorn / Handle width at the front 10mm Klammerrückenlänge innen / Bracket Back Length Inside 12mm Heftdraht Runddraht Nr. 21 - 23 / Flachdraht II - IV Staple Wire Round Wire No. 21 - 23 / Flat Wire II - IV Heftgeschwindigkeit 250 Klammern pro min / Stapling Speed 250 staples/min Rcedpfoxvdmdjx Aa Esk Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2025, New display machine! Powerful dust extraction unit according to DIN 8416 for the extraction of processing machines, suitable for installation in the working area outside explosive atmospheres. Key design features include: - Robust, galvanized steel sheet construction - Space-saving, compact design - Delivered ready for operation - Low energy consumption with high performance due to clean air side high-performance fan with special impeller - 2 large-volume collection containers with insert bags - Collection volume approx. 350 l - High operational safety and long service life through filters certified by the German employers' liability insurance association - Motorized filter cleaning device with automatic control and runtime addition - PLC control with automatic start (additional slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Manufactured according to DIN 8416 - Residual dust content in the exhaust air under 0.1 mg/m3 - Passed GS-HO-14 "GS - H3" testing Technical data: Suction nozzle arrangement: left Nominal airflow rate*: 1,450 m³/h Max. airflow rate: 1,950 m³/h Vacuum at the interface*: - at nominal airflow: 3,200 Pa - at max. airflow: 2,700 Pa Filter area: 10.3 m² Suction nozzle: 160 mm Nozzle height, approx.: 1,500 mm (centered) Fan motor: 2.20 kW, 3x400 V, 50 Hz Shaker motor: 0.12 kW, 3x400 V, 50 Hz Rcjdpfx Aaox Hwp Aj Ejk Pre-fusing: 16 A (on-site) Sound pressure level: 73.0 dB(A) Weight, approx.: 365 kg Dimensions (L x W x H): 1,648 x 1,012 x 1,990 mm * Required specification according to GS-HO-07 at 20 m/s and loaded filter bags (beech test dust). In delivery condition and under practical conditions with coarser dust, the suction performance is significantly higher. Location: Rieth

Year of construction: 2001, condition: excellent (used), Production speed: 600 cups/min Colours: 8 Rsdpfxoxww Nuj Aa Eeck Min cup diameter: 60mm Max cup diameter: 130mm Min. cup height: 30mm Max- Cup height: 160mm Counter: 25’731’666 cups produced Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler

Condition: used, Year of construction: 1989, operating hours: 11,690 h, Polyma 150 KVA generator set with integrated electric welding unit mounted on a 2-axle trailer (6,400 kg). The unit is one-owner and has been regularly serviced. Polyma 150 KVA Emergency power generator Mercedes Benz engine Rjdpfxsxwtgve Aa Esck OM 427 with 129 kW 6 cylinders MTU 6R 183 AA 31 Generator AVM DKBN 49/150 4 Insulation class F Protection class IP 23, right-hand rotation Weight 6,400 kg Overall length 7,300 mm Width 2,150 mm Height 2,930 mm 80 KM/H approval Only 11,690 operating hours Financing through our partner banks is possible; we are happy to assist you. We expressly reserve the right to prior sale, as this item is also being offered on other platforms. Accessory information is provided without guarantee. Subject to changes, prior sale, or errors. We offer and highly recommend an inspection and evaluation to avoid any misconceptions regarding the condition and suitability of the unit. Inspections and evaluations are possible at any time by appointment and are expressly encouraged.

Year of construction: 1997, condition: ready for operation (used), Offered: Vacumobilmobilentstauber year 1997. Extraction diameter 250mm, nominal volume flow 4241m³/h, minimum volume flow 3534m³/h, negative pressure at minimum volume flow 2350Pa (measured at the interface with a 4.0m hose Ø250mm), motor power 4.0kW/0.18kW, nominal speed 3000min⁻¹/900min⁻¹, weight approx. 630kg. Inspection is possible by appointment. Rcsdpfx Asxy R E Ija Esk