Used Pneumatic Lubricator for sale (9,415)

Condition: used, Vibratory Feeder with Pneumatic Screwdriver Stand Eco Line Vibratory Feeder, Sorting Device, Bowl Feeder, Vibratory Bowl, Automatic Screwdriver WEBER Type ZSU 24 Machine No.: 1113212 Year of Manufacture: 2003 Vibratory Feeder WEBER ZSU 24 Bowl diameter: 240 mm Gedpfoxf Up Uox Admjil Bowl internal height: 70 mm Sorting track width: 10 mm Power supply: 230 Volt, 50 Hz Operating pressure: 6 bar (for singulation and screws) Control voltage for pneumatic valves: 24 Volt - Controller for infinitely variable vibration speed = infinitely variable transport speed - Vibratory bowl in protective enclosure - With pneumatic feeding system - Feed impulse via external electrical control - The feeder was used for feeding screws M5 x 12 mm - Some pneumatic hoses need to be replaced - Siemens S7-200 CPU 224 PLC MISSING Space requirements vibratory bowl L x W x H: 450 x 450 x 315 mm Vibratory bowl weight: 32 kg WEVER Eco Line Screwdriver Stand Guide column: Ø 60 x 525 mm Height adjustment: 345 mm Primary stroke pneumatic cylinder 1 FESTO DZF-32-125-P-A-SM: 115 mm Screwdriver holder diameter: Ø 50 mm Secondary stroke pneumatic cylinder 2 FESTO: 30 mm Screwdriver guide diameter: Ø 37 mm Distance screwdriver guide to table: 135 - 465 mm - 1 piece flat cylinder FESTO, Type DZF-32-125-P-A-SM - 1 piece flat cylinder FESTO, Type probably DZF-32-30-P-A-SM - Screwdriver linear motion frame on linear guide - 3 position sensors on the cylinders - Festo pressure switch - Bosch pneumatic valve Screwdriver stand dimensions W x D x H: 200 x 410 x 1050 mm Screwdriver stand weight: 35 kg good condition Total weight vibratory feeder and screwdriver stand: 67 kg Attention: The original Siemens S7-200 CPU 224 PLC is missing (see picture control cabinet without PLC), therefore, an automatic process is not possible in this condition. The control system also managed the separations of the screws and controlled the screwdriver itself. The vibratory bowl is fully functional even without the PLC, the built-in vibratory bowl controller does not require PLC control. Process: Fasteners are filled into the bowl in bulk and conveyed upward by mechanical vibration (micro-throw principle). The vibratory bowl is automatically switched on or off depending on the fill level of the screw magazine. The screw is then conveyed by compressed air through a plastic hose to the downstream device. The feed impulse for each individual screw is triggered externally by the downstream device.

Condition: excellent (used), functionality: fully functional, Nominal pressure (bar) 7 Max. flanging force (kN) 70 Standard counterpressure 30 mm Gjdjxy Imvopfx Admeil Aluminium counterpressure 8 mm Self-adjusting counterpressure Support arms

Condition: good (used), Pneumatic rivet gun, rivet nut pliers, blind rivet nut clamp, pneumatic riveting tool, blind rivet gun, blind rivet -Compressed air rivet gun -Application range: 2.0 to 4.0 mm -Dimensions: 275/80/H220 mm Giedegzhxtopfx Admel -Weight: 1.3 kg

Condition: used, STROMAB TR 500 – Under-Table Crosscut Saw with Pneumatic Feed For sale is a STROMAB TR 500 under-table crosscut saw equipped with a pneumatic saw blade feed and a 500 mm blade diameter. This machine is ideal for precise and efficient crosscutting of workpieces in workshop environments. Year of manufacture: 2009 Machine no.: 3229 — Technical specifications • Max. cutting width: 360 mm • Cutting height: 135 mm • Saw blade diameter: 500 mm • Infeed roller conveyor length: 1,000 mm • Outfeed roller conveyor length: 1,000 mm • Table height: 850 mm • Main motor: 7.5 kW • Saw blade feed: pneumatic • Conformity marking: CE mark • Weight: approx. 420 kg — Condition & delivery The machine is in technically perfect condition and ready for immediate use. • Inspection possible at any time • Shipping securely packed on a pallet via freight forwarder possible at short notice — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net plus 19% VAT. Subject to change and error. Giodpfx Adsxiza Uemol

Year of construction: 2007, condition: excellent (used), Control: STE 328-89-1 1/2" complete TOX power pack: S75.160.200.12D table size: 996 x 695 mm Gjdep Aul Aepfx Admeil installation height: 600 mm total stroke: 150 mm Power stroke: 10 mm Weight: 5700 kg Electrical connection 230 V

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Giodpfx Aofv Awajdmsl Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Gijdeu D Tz Uopfx Admsl Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition 3 pieces available, price per piece

Condition: like new (used), functionality: fully functional, mileage: 636,521 km, first registration: 12/2022, fuel type: diesel, fuel: diesel, brakes: retarder, gearing type: automatic, suspension: air, Equipment: ABS, AdBlue, Bluetooth, air conditioning, airbag, onboard computer, SCANIA 660 S V8 FULL PNEUMATIC - First registration: 12/2022 - 636,521 km - Full pneumatic suspension - Retarder - Double bunk - Stationary air conditioning - LED headlights - Navigation system - V8 leather interior - Refrigerator - Alloy wheels OPTION FOR FINANCING OR CUSTOMIZED LEASING AVAILABLE AT OUR PREMISES. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL NAPLES BRANCH DOMENICO ESPOSITO S.P.A. EBOLI (SA) - OFFICIAL DEALER FOR MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL & MAXUS CONTACTS: 0823 1686306 335 6713062 - 377 7064530 Godpsx Ivvwjfx Admjil OPENING HOURS: MONDAY-FRIDAY 8:30-19:00, SATURDAY 08:30-14:00 Domenico Truck srl accepts no liability for any discrepancies relating to technical specifications, optional equipment, or other features that may differ from those described herein. Please check the specific vehicle’s features.

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder Giedpfx Aow Up Ixsdmel -Manufacturer: Festo, standard cylinder double-acting type DNG-32-160-PPV-A -Stroke: 160 mm -Piston: Ø 63 mm -Piston rod: Ø 12 mm -Max. pressure: 12 bar -Quantity: 3 pieces available -Price: per piece -Dimensions: 308/50/H50 mm -Weight: 1.0 kg/piece

Condition: good (used), AZO vacuum pneumatic conveying system Pneumatic conveying systems for granular, powdery and lumpy bulk materials Vacuum filter hopper for dosing tube DMN150 Separator for dosing sluice DMN200 Vacuum pump 3kW 2860 rpm -260 270 mbar Pipe 50mm and 80mm 2 complete sets available Gijdpfx Aowyfypjdmsl See our other advertisements VMA Wekerom

Condition: good (used), machine/vehicle number: Code: 0168, Code: 0168 Brand: STROMAB Model: ST 3000 - CE Standard Rotating pneumatic clamping machine, suitable for planks in general, squared timbers, strips for forming panels, table tops, steps for stairs and coffin - CE Standard Motorized rotation with release pedal and handy control wheel for worktable rotation Working capacity 3000 x 1200 mm Gedel Snzvspfx Admsil Nr. 9 pneumatic front pressers ( 3 each side) Nr. 18 vertical columns with cylinder, diameter 80 mm ( 6 each side) Nr. 3 Working stations Thrust of vertical cylinder 8 bar kg 400 Daily output (8 hours) m2 263 Mechanical safety barriers Overall dimensions : mm 4800 x 2850 x 2300 Weight kg 1100

Condition: new, pressure 4,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm Gijdpfx Adofv Av Somol table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 24 Kg dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Godpfotrpiijx Admeil Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: ready for operation (used), Technical characteristics Table top length : 2000 mm Tabletop width : 800 mm Minimum tabletop height : 350 mm Maximum table top height : 1200 mm Lifting capacity : approx. 230 kg Table on castors Power and Motors Voltage: 380 V Pluging: Three-phased Gijdpfeuaz Hzex Admjl Overall dimensions Lenght: 2000 mm Width: 800 mm Height: 350 mm

Condition: excellent (used), Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic control valve, angle seat valve, valve -Manufacturer: ARI Foxboro, Pneumatic Control Valve -Control valve: type ARI-Stevi 451 -Spring accumulator: ARI Type 100403429-216 -Positioner: Foxboro, Schneider Type SRI986-BIDS7ZZZNA -Connection: DN50 PN16-25 -Number: 3x control valve available -Price: per piece -Dimensions: 710/300/H270 mm -Weight: 31 kg Godpfx Asq Nqxzedmjil

Condition: good (used), Pneumatic cylinders, air cylinders, standard cylinders, compressed air cylinders Godpow Dbw Ejfx Admoil -Manufacturer: SMC, pneumatic cylinder double version each open on one side -Type: C95SDB 80-200 -Piston rod: Ø 25 mm -Stroke: 200 mm each -Pressure: max. 10 bar -Dimensions: 653/195/H130 mm -Total weight: 13.9 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder Gjdpfowxtpcox Admsil -Manufacturer: Rexroth, standard cylinder double-acting type Stroke: 800 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -max. pressure: 10 bar -Dimensions: 960/50/H75 mm -Weight: 3.5 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder Godpfx Adswxtmnjmsil -Manufacturer: Festo, standard cylinder double-acting type DNN-63-1000 PPV-A -Stroke: 1000 mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm -max. pressure: 12 bar -Dimensions: 1190/80/H110 mm -Weight: 10.2 kg

Condition: used, Solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, on-off valve, pressure build-up valve Gjdpfx Asii Sfujdmjil -Manufacturer: Festo, on-off valve pressure build-up valve orig -Type: HEL-D-MIDI Mat. no. 170691 U643 series -Working pressure: 3 - 16 bar -Dimensions cardboard: 65/55/H130 mm -Weight: 0.5 kg.

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, round cylinder -Manufacturer: Festo, standard cylinder type DSNU-32-125-PPS-A with proximity switch -Stroke distance: 75 mm -Piston: Ø 32 mm -Piston rod: Ø 10 mm / M 10 x 1.25 -Proximity switch: 2 pieces, see photos -Quantity: 4x cylinders available -Price per piece -Dimension: 200/40/H60 mm Giedpoqv Hqgsfx Admel -Weight: 0.4 kg/pc.

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 50 mm -Piston diameter: 63 mm -Piston rod: 20 mm Gijdpfx Ajd Tyz Ujdmol -Price: per piece -Number: 1 pieces -Dimensions: 245/75/H75 mm -Weight: 2.35 kg/piece

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy saving gate valve -Manufacturer: Schuko, pneumatic gate valve type 160 -Diameter: 160 mm -Valve drive: 220 V, convertible to 24 V Giodpfx Adomydmqjmel -Nominal pressure: max. 6 bar -Number: 5x gate valve available -Price per piece -Dimensions: 530/220/H150 mm -Weight: 4.5 kg/pc.

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy saving gate valve -Manufacturer: Schuko, pneumatic gate valve type 180 -Diameter: 180 mm -Valve drive: 220 V, convertible to 24 V -Nominal pressure: max. 6 bar Giedpfjmydmuex Admsl -Number: 2x gate valve available -Price per piece -Dimensions: 600/250/H140 mm -Weight: 5 kg/pc.

Condition: used, Butterfly valve, flap valve, ball valve, butterfly valve, shut-off valve, gate valve, pneumatic energy saving gate valve -Manufacturer: Schuko, pneumatic gate valve type 300 -Diameter: 300 mm Gjdjmydm Rjpfx Admoil -Valve drive: 220 V, convertible to 24 V -Nominal pressure: max. 6 bar -Number: 1x gate valve available -Price per piece -Dimensions: 850/360/H200 mm -Weight: 12,1 kg/pc.

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 320 mm -Piston diameter: 50 mm Gjdpsd Hvh Dsfx Admeil -Number: 2x available -Price: per piece -Dimensions: 530/65/H90 mm -Weight: 2.9 kg/piece