Used Plywood Press for sale (12,810)

Condition: new, Year of construction: 2025, Capacity: 25 and 40 kg/h Briquette size: 50 mm diameter Briquette length: 20 - 40 mm Codpfx Aepfatpep Djhd Container size: 0.38 m³ Power consumption: 4 kW Machine length: 1860 mm Machine width: 890 mm Machine height: 1100 mm Weight: 400 kg

Condition: as good as new (ex-display), Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Noise level: 70 Db Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg Csdpfxeu Egp Ij Ap Dehd

Condition: used, Technical details: Chodpfou N Ay Rjx Ap Dod pressure: 2 t passage: siehe Text mm stroke: siehe Text mm Pressing power: ca. 2 kN 5 pcs abor presses No. 2: throat 105 mm; distance ram-table 95 mm; ram stroke 36 mm; table L:120 x w:140 mm; weight 17 kg; dimesnions L:270 x W:220 x H:420 mm No. 3: throat 90 mm; distance ram-table 190 mm; ram stroke 45 mm; pressure force 3 kN; ram stroke adjustment travel 150 mm via hand wheel; table size : L:120 x W:160 mm; weight 26 kg; dimensions without wooden stand L:235 x B:160 x H:730 mm No. 4: throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel ; table size L:110 x W:160 mm; weight 30 kg; dimesnions without wooden stand L:230 x W:180 x H:700 mm No. 5: throat 80 mm; distance ram-table 220 mm; ram stroke 40 mm; ram stroke adjustment travel 150 mm via hand wheel; table size L:110 x W:160 mm; weight 30 kg; dimensions without wooden stand L:230 x W:180 x H:700 mm, incl. device No. 7: throat 130 mm; distance ram-table 95 mm; ram stroke 20 mm; parallel clamper guided with 2 bolts with a return spring ; table size L:50 x B:80 mm; weight 17 kg; dimensions L:330 x W:160 x H:380 mm, incl. punch device *

Condition: excellent (used), Figure 1 provided by the manufacturer as an example. Remaining images are original. Manufacturer: Minda Designation: Timper Press V 200 Technical data: Main pressing force from below: Number of press chambers: 2 Maximum lamella width: 270 mm Maximum glue-laminated timber length: up to 18 m Glue-laminated timber profile: straight Lateral alignment of the lamellas: included Cjdpfx Aohtd E Asp Dehd Pressing system: hydraulic Permanent pressure control: included Packaging: separate Loading/unloading: in the longitudinal direction

Condition: new, machine/vehicle number: ZBP 30, The AMIS briquetting press type ZBP 30 produces 30 mm briquettes. These briquettes are ideal for combustion in wood gasifiers and smaller wood chip boilers or heating systems. Any material from a woodworking operation (shavings, dust, etc.) can be briquetted. Cjdoyr I Hnspfx Ap Dehd Wood chips, sawdust, wood shavings, etc., are generated in all craft and industrial woodworking companies. These materials incur significant storage and transport costs on a daily basis. Briquetting presses offer an ideal solution by compressing the material into briquettes, which are simple and space-saving to store and transport. Furthermore, the risk of spontaneous combustion is significantly reduced. The briquetting presses require little space, feature sturdy construction, and are equipped with low-maintenance technology. Whether it is wood, paper, biomass, foam, or polystyrene, the ZBP can briquette all suitable materials. With a throughput of up to 35 – 130 kg/h, they are especially suited for small and medium-sized enterprises.

Condition: new, Year of construction: 2024, Pressing area: 3000 mm x 1800 mm Design: Freestanding Working area: 1460 mm x 2900 mm Chedpfjxzfw Uox Ap Ded Number of manual hydraulic cylinders: 4 Pressing pressure per cylinder: 2000 kg Cylinder stroke: 70 mm Pressure clamps: 1 Machine length: 2900 mm Machine width: 900 mm Machine height: 2000 mm

Condition: used, Dimter Profipress L 2500 Year of manufacture: 2006 Dimensions: • Lamella width (for panels): 30-150 mm • Thickness: 11-60 mm • Infeed length: 800-2500 mm • Panel width: variable, up to max. 1300 mm • Infeed width per cycle: min. 650 mm / max. 1300 mm Chjdoyhggrepfx Ap Dsd • Integrated hydraulic unit for pressing force and hydraulic motors • Electrical: • Operating voltage: approx. 400 V / 50 Hz • Electrical connection rating for 40 kW RF generator: 56 kW

Condition: used, functionality: fully functional, This offer is for a used ‘Xerox iGen 5 Press’ colour production system Items for sale: 1 x Xerox iGen 5 Press with the following specifications: Includes FreeFlow Print Server Includes 2 x YVC-2 paper decks Includes YVC-3 finisher Includes 5th colour (orange) Not the right configuration? It is no problem to configure the machine to your requirements. Please feel free to contact us! Meter readings: Total: Approx. 15,719,744 pages Condition: This offer is for a used machine, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo Chjdpfjy Dfclsx Ap Djd Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment for this! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: good (used), Year of construction: 1964, Pressing force: 5 t Stroke adjustable: 8 - 50 mm Ram adjustability: 25 mm Chjdpfx Apoy D Abfe Dod Weight: approx. 500 kg Accessories / Special features: • Adjustable table • Foot release Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 2026, pressing force: 180 t, DURENDUS 180 T Workshop Press – Single-Column Press – 1,400 mm clear width, 400 mm stroke The machine shown here has already been built and delivered for a customer order. We can supply you with this machine from stock or manufacture it new – and are happy to take individual options into account. This is a hydraulic workshop press for pressing, straightening, and assembly work in workshop and industrial environments. Options (on request): The options listed are based on realized customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional standard version – in practice, it is usually expanded with additional equipment and configured accordingly for the specific project. Tabletop with X-shaped T-slot 700 × 1,000 × 100 mm Pressure adjustment Lateral displacement of the press ram (900 mm) Bending tool Twist-proof cylinder with manual stroke adjustment V-profile straightening bolster in combination with the tabletop LED lighting Foot switch Cooling ===== Technical Data + Information: ==== General Information Type: Workshop press Press force: 180 t (optionally adjustable) Total weight: approx. 1,700 kg Overall dimensions (W × D × H): 1,900 × 900 × 2,700 mm ==== Working Area Clear width: 1,400 mm Open depth: 400 mm Installation height: 250–900 mm (variable) ==== Table & Ram Cross member usable width: 1,400 / 670 mm Ram stroke: 400 mm Cylinder diameter: Ø 240 mm Piston rod: Ø 135 mm Height adjustment: via chain mechanism ==== Speeds Csdpjy H A T Tjfx Ap Dehd Idle speed: 8.1 mm/s Return speed: 11.8 mm/s ==== Hydraulics & Drive Pump capacity: 22 l/min Motor power: 7.5 kW Hydraulic tank: 42 l Pressure accuracy: ±5 bar Hydraulic system: DUPLOMATIC ==== Control & Operation Hand lever operation Manual fine adjustment via hand lever Connection: 400 V / 50 Hz Total connected power: approx. 8 kW ==== Equipment Height-adjustable cross members with pin locking Chain mechanism for table adjustment Pressure gauge for pressure indication Emergency stop switch CE certification Two-layer paint finish according to RAL ===== Pressing, expelling, assembly operations, straightening operations, workshop applications, maintenance Workshop press, hydraulic press, single-column press, C-frame press, assembly press, straightening press, industrial press Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured in accordance with German Machinery Directives and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all aspects of the national Brazilian safety directive NR 12, which is based on these. Our great strength lies in the design and manufacture of special machines and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. The hydraulics of the presses predominantly use components from leading European manufacturers.

Condition: used, Year of construction: 2015, machine/vehicle number: 663462, functionality: fully functional, Specification: Min./max. air pressure: 0.4/0.6 MPa; 4/6 bar Max. pressing force: 50 kN Total stroke: 150 mm Power stroke: 7 mm Type: STE341-7210 SF device Power: 0.5 kW Power supply: 230/3/50-60 V/A/Hz Control voltage: 24 VDC Protection rating: IP54 Chsdpfx Apowtgpxs Ded Pre-fuse: 16 A The TOX Pressotechnik hydropneumatic press EEB 008.061.A.001 is a versatile and powerful solution for precise forming and assembly operations in industrial manufacturing. It combines the advantages of hydraulics and pneumatics to ensure consistent force transmission and high accuracy. The robust design ensures long service life and reliable operation, while the user-friendly control system enables easy handling.

Condition: used, Year of construction: 2013, functionality: fully functional, Servo spindle press with screw station Rittal Top Therm: SK3304500 Specification: Cjdpowu Adbsfx Ap Dehd V: 3x380-400 Watt: 25,900 Hz: 50 The Tool Temp TT-380 servo spindle press with screw station is an innovative and precise machine, ideally suited for demanding manufacturing processes. It stands out for its high accuracy and efficiency, making it a reliable solution for fast and precise screw connections. The integrated screw station enables efficient automation of the screwing process, while the servo technology ensures consistent force and motion control.

Condition: new, Year of construction: 2025, Performance: 40 and 60 kg/h Automatic start: yes Oil cooler: Yes Briquette size: 50 mm diameter Briquette length: 35 mm Container volume: 0.38 m³ Codewhuuljpfx Ap Djhd Power consumption: 5.5 kW Machine length: 1860 mm Machine width: 890 mm Machine height: 1100 mm Weight: 400 kg

Condition: excellent (used), Year of construction: 2001, 2 filter presses are being offered. Years of manufacture: 1999 and 2001. For details, see the nameplates. Chsdoxbrmcjpfx Ap Djd

Condition: used, Year of construction: 1987, functionality: unexamined, Press force: 200 kN Ram stroke, constant: 210 mm Adjustable strokes per minute: 20 - 60 Usable working energy per cycle: 15 kJ Drive power: 24 kW Tool installation height between table and ram, stroke down, adjustment up: 500 mm Ram adjustment: 100 mm Ram clamping area: 600 x 600 mm Cedpfx Aowy Sqzep Djhd Table clamping area: 600 x 600 mm Ejector stroke: 90 mm Weight: 20 t

Condition: new, Year of construction: 2026, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. Cjdpfow Sgnkex Ap Dshd - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: excellent (used), Year of construction: 2014, Hydraulic Press Bunorm 4S-500 Manufacturer: Bunorm AG Model: 4S-500 Year of Manufacture: 2014 Pressing Force: 500 kN Maximum Pressure: 225 bar Weight: 3,200 kg Electrical Connection: 3×400 V + N + PE Frequency: 50 Hz Protection: 20 A Control System: Siemens Simatic HMI Touch Safety System: SICK C4000 Light Curtain Chedpfoxfl Axjx Ap Dsd SCOPE OF DELIVERY Includes, among others (non-exhaustive list): Hydraulic Press Bunorm 4S-500 Exact scope of delivery as shown in the photo series. The Bunorm 4S-500 hydraulic press impresses with its robust construction and a pressing force of 500 kN at a maximum pressure of 225 bar. With its solid build and a weight of 3,200 kg, the press is suitable for demanding production applications. The integrated Siemens Simatic HMI Touch control system enables precise and user-friendly operation. Thanks to the modern SICK C4000 light curtain safety system, a high level of operator protection is ensured. This machine is the ideal solution for companies that value reliability, precision, and safety. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: used, Year of construction: 1974, Vulcanizing Press Mapelli T60 Manufacturer: Mapelli Type: T60 Year of manufacture: 1974 Operating voltage: 380 V Frequency: 50 Hz Control panel: Integrated temperature controllers and operating modules Heating control: Three separately adjustable temperature zones Main switch: Present Manual/automatic operation: Selectable via control panel Safety features: Emergency stop Pressure display: Analog manometer Press area: Vertical closing unit with upper and lower heating plates Construction: Robust steel design Application: Vulcanizing and pressing of molded parts Chsdsx Exndopfx Ap Dod The Mapelli T60 vulcanizing press is a heavy-duty industrial press designed for reliable and uniform vulcanization processes. The robust housing made of solid steel ensures high stability and longevity. The clearly arranged control panel allows for precise adjustment of heating temperatures, operating modes, and pump functions. Three digital temperature controllers enable precise regulation of the heating plates, ensuring reproducible results during vulcanization. The vertical pressing mechanism offers a solid support and closing unit, ideal for molded parts and various materials. The machine features an integrated safety circuit including emergency stop, as well as an analog pressure gauge to monitor the pressing process. Due to its industrial design, the Mapelli T60 is excellently suited for continuous operation and offers an economical solution for companies requiring robust vulcanizing technology. No guarantee is given for the accuracy, completeness, or currentness of the information provided.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: V309866-20, pressing force: 126 t, filling opening width: 1,620 mm, filling opening length: 1,000 mm, bale length: 1,800 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 650 kg, total height: 7,034 mm, type of input current: DC, input voltage: 400 V, overall weight: 43,000 kg, noise level: 85 dB, pressure: 280 bar, oil tank capacity: 2,700 l, power: 160 kW (217.54 HP), empty load weight: 43,000 kg, protection type (IP code): IP55, stroke length: 2,900 mm, Equipment: documentation/manual, Csdpfx Apoznm H Do Dehd

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation Cjdpfx Apezrpn Sj Dehd

Condition: used, Year of construction: 1977, pressure 80 t stroke 8 - 112 mm no. of strokes 65 /min throat 345 mm passage to the back 500 mm dayligth 472 mm table surface area 840 x 610 mm hole in the table 280 / 315 mm table height over floor 800 mm ram surface 650 x 410 mm ram adjustment 71 mm power requirement 13,5 kW Weight 6,10 t dimensions of the machine ca. 1,5 x 1,9 x 3,0 m x m x m Chodpfxjzrpqms Ap Dsd with motor with two speeds, pneumatic clutch/brake combination (Ortlinghaus), mechanical overload protection in ram, manual stroke adjustment, motoric ram adjustment, fix table, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1998, Pressure 800 t distance between columns 3550 mm stroke 1100 mm Distance table/ram, max. stroke up, adjustment up 1900 mm Table surface area 3500 x 1800 mm pressure of drawing cushion in table 350 t Die cushion stroke in table 280 mm Die cushion pressure in ram 80 t Die cushion stroke in ram 160 mm Ram surface 3500 x 1800 mm Side window 1900 mm Weight 100,0 t Floor Space (WxD) 5,3 x 4,3 m Height above floor 7,3 m Height below floor 5,0 - 6,0 m year of manufacture 1970 - overhaul 1998 with oil-hydraulic drive, hydraulic controllable drawing cushion in table and ram, hydraulic cutting impact cushioning, moving table (without rails for the moving table) Height beneath floor approx. 5 - 6 m stored in dismantled condition - Video at seller’s site before dismantling available Cedpszrptnefx Ap Dshd

Condition: used, Year of construction: 2005, Pressure 800 t distance between columns 2560 mm stroke 1050 mm Distance table/ram, stroke up 1870 mm Table surface area 2500 x 1730 mm pressure of drawing cushion in table 300 t Cedpfx Apjzrpt Ij Dshd Die cushion stroke in table 395 mm Die cushion area in table 2300 x 1300 mm Ram surface 2500 x 1730 mm Die cushion pressure in ram 63 t Die cushion stroke in ram 150 mm Side window 1000 mm Oil volume 4300 l Power capacity 200,0 kW Dimensions (WxDxH) 4,1 x 2,8 x 10,0 m Height above floor 7,0 m year of manufacture 1974 overhaul 2005: formerly type BZE 800, converted to ZE 800 by manufacturer with new ram and new cylinder mit ölhydraulischem Antrieb, hydraulischem gesteuertem Ziehkissen im Tisch und Stößel stored in dismantled condition - Video at seller’s site before dismantling available

Condition: refurbished (used), functionality: fully functional, Year of construction: 1993, machine/vehicle number: 20658, stroke length: 250 mm, throat depth: 305 mm, operating speed: 7 mm/s, reverse speed: 70 mm/s, table height: 980 mm, oil tank capacity: 350 l, overall weight: 22,500 kg, total length: 6,300 mm, total width: 2,300 mm, total height: 3,475 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, pressing force: 320 t, clearance between the columns: 3,760 mm, distance table to ram: 500 mm, ram plate length: 4,500 mm, table length: 4,800 mm, table width: 250 mm, type of input current: three-phase, year of last overhaul: 2026, Equipment: documentation/manual, safety light barrier, Hydraulic press brake LVD PPI 320/40 S840W Year of manufacture: 1993 Year of refurbishment: 2026 Serial number: 20658 Technical specifications: Force: 3200 kN Working length: 4500 mm Distance between uprights: 3760 mm Stroke: 250 mm Distance table – ram: 500 mm Gap: 305 mm Table width: 250 mm Approach speed: 80 mm/s Working speed: 7 mm/s Csdpfxszktg Aj Ap Dehd Return speed: 70 mm/s Weight: 22500 kg Motor: 22 kW Oil capacity: 350 l Dimensions (L x W x H): 6300 x 2300 x 3475 mm New 2026 S840W controller • S840W: 15” touch screen – Graphic controller with free online service assistance • Axes: Y1, Y2, X, V • V: CNC crowning table • 2 front supports • Hydraulic clamping of the top tool in LVD classic 15 tool holder Tooling included: E15 H150 78° L3000mm D15 H150 78° L4500mm F15 H150 26° L4500mm H15 H150 L2500mm R15 H150 78° L4500mm V20 H130 30° L3500mm V20 H130 78° L3000mm V40 H130 78° L4500mm V60 H130 78° L4500mm V90 H130 78° L2500mm M130 Multi-V L4500mm (90/40/24/16/10)

Condition: used, Universal temperature control unit REGLOPLAS Type 90M/10/SG75/D K/RT50 Pressurized water temperature control unit with electric heating and connections for external cooling Circulating process temperature control for industrial applications in plastics processing, especially for the temperature control of injection molds and other process tools. Manufacturer's serial number: 102010170001, Year of manufacture: 2009 Temperature: max. 90°C (for water) Heat transfer medium: Water Temperature range: +20°C to 90°C Csdpfx Apjz Au Hbs Dohd Operating overpressure: max. 6 bar Pump capacity: 100 l/min Tank volume: 2.8 liters (internal filling volume) Heating capacity: 10 kW Cooling capacity of heat exchanger: up to 160 kW (depending on the external cooling unit) Pump motor power: 1.5 kW Continuous sound pressure level