Used Plotter And Scanner for sale (6,264)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement Ndedpfjzhub Asx Aqwoa - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: new, Quantity: 6 pieces When buying 3 pieces, price: €2,000/piece Njdpfx Aswb Ea Eoqwjda

Condition: excellent (used), Year of construction: 2022, Aeoon Full DTG Printing Solution for Sale Included Equipment: Ndedpfsxd U H Rex Aqwoa - Aeoon Kyo Printer (8 printheads) - Aeoon Compact Printer (8 printheads) - Aeoon PTB Pretreatment Line - 6 m conveyor dryer (two lines) - 3 m conveyor dryer (one line) - RIP software - T-Mini automatic folding device Aeoon Compact: - 8 printheads - Color configuration: CMYK + White - Uses water-based ink - Integrated humidification system - Two printing axes - Automatic cleaning system - Maximum printing resolution: 2400 dpi - Maximum print area: 1200 x 800 mm Aeoon Kyo: - 8 printheads - Color configuration: CMYK + White - Uses water-based ink - Integrated projection system - Integrated humidification system - Three printing axes - Automatic cleaning system - Maximum printing resolution: 2400 dpi - Maximum print area: 2000 x 980 mm Aeoon PTB Pretreatment Line: - Printing area: 1000 x 3000 mm - 13 nozzles - Speed: 10 m/min - Automatic cleaning system Conveyor Dryers: - Two belt system - Belt width: 700 mm - Belt length: 6000 mm - Feeder length: 1200 mm - Stacker length: 1200 mm - Dryer height: 100 mm - Temperature up to 200°C T-Mini Folding Device: - Fully automatic T-shirt folding - Memory for up to 6 programs - Integrated packaging module

Condition: excellent (used), Year of construction: 2020, Keyence VR-5000 – Non-contact 3D measurement system The Keyence VR-5000 One-Shot 3D is an advanced, non-contact measurement system that utilizes optical technology for fast and highly precise measurement of part geometry. The device performs a complete 3D scan in seconds, enabling dimensional control, profile analysis, height and volume measurements, surface roughness analysis, and comparison of parts with a CAD model. The offered set includes: * Keyence VR Series One-Shot 3D measuring head * Keyence VR-5200 controller * Keyence VR-H3W measuring table * Dell control computer * HP monitor * Keyboard and mouse * User manual * Complete set ready for operation Key advantages * Non-contact 3D measurement with high accuracy. * Very fast measurement – a complete scan in seconds. * No influence of pressing force on the measured part. * Automatic generation of height maps and 3D models. * Ability to measure parts with complex geometries. * Intuitive software with reporting and data export functions. * Ideal for quality control, metrology laboratories, the automotive, aerospace, electronics, medical, and precision manufacturing industries. Typical applications * Height, width, and depth measurements. Nedpfx Aozr Rlljqwsda * 2D and 3D profile analysis. * Tool wear analysis. * Volume and flatness measurements. * Inspection of parts after CNC machining, stamping, and molding. * Comparison of a part with a reference CAD model. * Quality control of serial production. Condition The device is in very good visual and technical condition. The set is complete and includes the control computer and accessories shown in the photos.

Year of construction: 2014, operating hours: 800 h, condition: like new (used), functionality: fully functional, We offer an automatic weighing and packaging line manufactured by BW Packaging Systems (formerly Simionato), built in 2014. The line is designed for the automatic portioning, weighing and packaging of dry food products such as nuts, dried fruits, seeds, cereals, confectionery and other free-flowing products. The machine is in excellent, like-new condition, has less than 1,000 operating hours and has been fully refurbished. It is fully operational, immediately available and ready for production. Ndodpfx Aqeznlbgjwsa The weighing system has a capacity of up to 80 portions per minute, while the intermittent packaging unit operates at speeds of up to 40 packages per minute, depending on the product and packaging format. The combined metal detector and checkweigher shown in the pictures is available separately and is not included in the listed price. A complete maintenance history is available for every individual module of the line, including all service records and invoices. Full original CE documentation for the complete system is included, ensuring complete traceability and compliance. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Original ZEISS CMM Probe Holders and Stylus Extensions Original ZEISS probe holders Stylus extensions Various star styli and straight styli As shown in the pictures Condition: Used Ndsdpfxjzg Eczo Aqwea Good working condition Carefully removed from a functioning ZEISS CMM Ideal for ZEISS CMM users looking for original replacement or additional probing equipment.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 8,999 kg, first registration: 04/2026, loading space length: 20,640 mm, loading space width: 2,540 mm, loading space height: 2,830 mm, total length: 20,640 mm, total width: 2,540 mm, total height: 2,830 mm, suspension: air, tire size: 385/65-R22.5, color: red, Year of construction: 2026, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Lift axle - Air suspension - Drum brakes = Notes = Ndjdpfx Ajza Uaqjqwsa New and unused Kässbohrer flatbed semi-trailer with ABS/EBS. BPW axles with drum brakes, extendable to 6.90 m, 3rd axle = steering axle (trailing axle), hardwood floor with 6 twist locks per side, 11 lashing points per side, 10 stake pockets per side, lashing points in the longitudinal beams, 1 toolbox, steps on the right, unladen weight: 10,170 kg, permissible total weight: 45,000 kg, tires: 385/65-R22.5 (L: 16/16/16 mm; R: 16/16/16 mm), Dutch registration with a valid main inspection until 04/29/2027, year of manufacture: 11/2022 = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW DRUM Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tire tread left: 100%; Tire tread right: 100% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 100%; Tire tread right: 100% Rear axle 3: Max. axle load: 8,999 kg; Steered; Tire tread left: 100%; Tire tread right: 100% Weights Unladen weight: 10,170 kg Payload: 34,830 kg GVW: 45,000 kg Functional Body brand: Kässbohrer LB3E Extendable body: Yes Maintenance, History and Condition APK (technical inspection): valid until 04/2027 Technical condition: very good Optical condition: very good Identification License plate: OX-76-GJ Further Information Please contact Arne Honingh for more information.

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 8,999 kg, first registration: 04/2026, loading space length: 20,640 mm, loading space width: 2,540 mm, loading space height: 2,830 mm, total length: 20,640 mm, total width: 2,540 mm, total height: 2,830 mm, suspension: air, tire size: 385/65-R22.5, color: red, Year of construction: 2026, Equipment: ABS, = Additional Options and Accessories = - BPW axles - EBS - Lift axle - Air suspension - Drum brakes = Notes = New and unused Kässbohrer flatbed semi-trailer with ABS/EBS. BPW axles with drum brakes, extendable to 6.90 m, 3rd axle = steering axle (trailing axle), hardwood floor with 6 twist locks per side, 11 lashing points per side, 10 stake pockets per side, lashing points in the longitudinal beams, 1 toolbox, steps on the right, unladen weight: 10,170 kg, permissible total weight: 45,000 kg, tires: 385/65-R22.5 (L: 16/16/16 mm; R: 16/16/16 mm), Dutch registration with a valid main inspection until 04/29/2027, year of manufacture: 11/2022 = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW DRUM Ndodjza T Ugspfx Aqwoa Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tire tread left: 100%; Tire tread right: 100% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 100%; Tire tread right: 100% Rear axle 3: Max. axle load: 8,999 kg; Steered; Tire tread left: 100%; Tire tread right: 100% Weights Unladen weight: 10,170 kg Payload: 34,830 kg GVW: 45,000 kg Functional Body brand: Kässbohrer LB3E Extendable body: Yes Maintenance, History and Condition APK (technical inspection): valid until 04/2027 Technical condition: very good Optical condition: very good Identification License plate: OX-76-GJ Further Information Please contact Arne Honingh for more information.

Year of construction: 2021, condition: excellent (used), Scanner Finnos X-ray Nsdpoxmk I Aefx Aqwsda Manufacturer: Finnos Year of purchase - 2021 3D, laser and X-ray technology Including Jack-Steel measuring conveyor (2021) EROP ergonomic solution for sorters(sorting chair etc.) was in operation for less than 2 years

Condition: new, functionality: fully functional, color: orange, empty load weight: 2,200 kg, brakes: other, gearing type: other, emission class: none, loading space length: 5,745 mm, loading space height: 2,821 mm, Year of construction: 2026, Equipment: additional headlights, hydraulics, TICAB RPS 9000 (9 m³) Sand & Salt Spreader | Heavy-Duty Winter Road Maintenance Equipment Engineered for productivity and durability, the RPS 9000 provides uniform spreading performance even in extreme weather conditions, helping maintain safe and accessible roads throughout the winter season. The TICAB RPS 9000 is a high-capacity, professional-grade sand and salt spreader designed for efficient winter road maintenance, snow and ice control, and anti-icing/de-icing operations. Built for demanding conditions, it ensures reliable performance on highways, municipal roads, airports, parking areas, and industrial surfaces. Key Advantages ✔ Large 9 m³ hopper capacity for long, uninterrupted operation ✔ Hydraulic scraper-chain feeding system ensures stable and consistent material flow ✔ Disc spreading system for precise and uniform salt/sand distribution ✔ Adjustable spreading width from 4 to 8 meters ✔ Optional autonomous engine for independent operation ✔ Optional cab-controlled proportional disc speed for enhanced precision ✔ Quick mounting system for fast installation on trucks ✔ Heavy-duty construction designed for harsh winter environments Applications • Winter road maintenance and snow control • Anti-icing and de-icing operations • Highway and municipal street maintenance • Airport runways and taxiways • Parking lots and logistics centers • Industrial and commercial территории Built for Professional Winter Operations The TICAB RPS 9000 is designed to meet the demands of modern winter maintenance fleets. Its high-capacity hopper and precise spreading system ensure efficient material usage, reduced operating costs, and improved road safety under snow and ice conditions. Why Choose TICAB RPS 9000? Ndjdpjx Uwp Eofx Aqwja • High productivity with large working capacity • Reliable performance in extreme weather conditions • Precise and uniform spreading quality • Flexible truck-mounted design • Ideal for municipal and highway winter service fleets Request a Quote Today Contact us for pricing, delivery options, and full technical specifications. The TICAB RPS 9000 is available for fast production and worldwide shipping.

Condition: new, functionality: fully functional, color: orange, brakes: other, gearing type: mechanical, emission class: none, suspension: hydraulics, Year of construction: 2026, Equipment: additional headlights, fog lights, hydraulics, low noise, onboard computer, traction control, TICAB Sand & Salt Spreader RPS 1500 | 1.5 m³ – Professional Winter Road Maintenance & De icing Equipment Featuring a 1.5 m³ hopper, hydraulic drive and efficient brush chain feed, this spreader delivers uniform distribution of salt, sand, grit, and other anti skid materials, helping municipalities, contractors and road services maintain safe roads, sidewalks and pavements throughout the cold season. The TICAB RPS 1500 is a high performance sand and salt spreader engineered for winter road maintenance, snow and ice control, anti icing, de icing, and surface safety operations. Key Features • Hopper capacity: 1.5 m³ for extended operation without frequent refills • Hydraulic scraper chain feeding system for reliable material delivery • Spreading width: 3–6 m (varies with disc speed) for broad winter coverage • Disc spreader with adjustable tilt for optimized salt and sand dispersion • In cab control panel with optional proportional disc speed control • Can be mounted on a trailer or customer truck chassis for versatile use Applications • Winter road de icing & anti icing spreading • Municipal street, highway & urban pavement treatment • Sidewalks, parking lots & industrial surface maintenance Ndedpex Uql Hofx Aqwsa • Sand, salt & grit spreading for traffic safety Why Choose TICAB RPS 1500 It’s a cost effective choice for municipalities, winter service contractors, and road maintenance fleets. The TICAB RPS 1500 delivers compact design, high efficiency, and reliable performance — reducing manual labor, improving safety, and increasing productivity during winter road service, de icing, and anti skid applications Contact us for price, delivery options, and full technical specifications. Get ready for safe winter roads with TICAB!

Condition: new, functionality: fully functional, color: orange, brakes: other, driver cabin: other, gearing type: other, emission class: none, suspension: other, Year of construction: 2026, Equipment: all wheel drive, fog lights, low noise, TICAB Sand & Salt Spreader RPS 6000 – Road De icing & Winter Maintenance Equipment The TICAB RPS 6000 Sand and Salt Spreader is a high capacity winter maintenance machine engineered for large scale snow and ice control, road de icing, and anti icing treatment on local, national, and international roads, highways, streets, parking lots, and airport surfaces. Nsdpfx Asx U Sv Teqwsda Developed for efficient, continuous spreading of sand and salt mixtures, this spreader delivers uniform coverage and high productivity during winter service. Key Features: • Large hopper capacity: 6 m³ for prolonged operation without frequent refilling • Hydraulic drive system with scraper chain feed for reliable material supply • Wide spreading width: 4–8 m — ideal for single to multi lane roads and highways • In cab control: on/off and optional proportional disc speed control from the driver’s cabin • Optional autonomous engine for independent operation • Easy removal from truck chassis so vehicle can be reused after winter service Applications: • Winter road maintenance and anti icing operations • Spreading salt, sand, grit, and de icing agents • Highway, municipal street, airport, industrial yard, and parking lot treatment • Surface preparation and ice prevention for safer traffic Why Choose TICAB RPS 6000: The TICAB RPS 6000 combines high productivity, reliable hydraulic drive, large hopper capacity, and adjustable spreading performance, making it a top choice for contractors, municipalities, road service companies, and airport operations focused on efficient, high quality winter road maintenance. Contact us now for price, delivery options, configuration details, and full technical specifications.

Condition: new, Year of construction: 2026, Autonomous spreader of sand-salt mixture RPS-1500 from ТМ TlSAV - is a powerful equipment for high-quality spreading of roads and pavements with de-icing materials, which allows to minimize the use of manual labour and reduce the accident and risk of injury to people. The spreader is equipped with a 1.5 m³ hopper with a scraper-chain feeding mechanism and a disc for spreading materials. Thanks to its autonomy and compact dimensions it can be used with any vehicle. CHARACTERISTICS -Spreading width, depending on disc speed - 3-6 m. - Hydraulic drive mechanisms. -Adjustment of the disc inclination (manual). -Mix feeding mechanism - scraper-chain. -System of proportional control of disc rotation speed on the control unit in the driver's cab - (optional). - Control of the equipment by remote control from the driver's cab. - It has its own wheelbase or can be mounted on the customer's vehicle. TICAB is a manufacturer of road machines: bitumen emulsion sprayers, joint and crack fillers, asphalt recyclers, street hoovers, universal loaders and other road machinery. High European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor! We will be glad to contact you! Sand spreader with capacity of 6 cubic metres (9 tonnes of mixture) for treatment of carriageway with anti-icing materials (sand, salt, sand-salt mixture) in winter period and transportation of asphalt concrete mixture in summer period. Sand spreaders are installed in the lorry body with the help of a crane. -Dimensions: L-4.5 m; W-2.10 m; H-1.85 m - Travelling speed - up to 30 km/h. - Strip treatment width up to 10 m, spreading density - up to 350 g /m. - Adjustment of width and density of spreading - on the body of the spreader. Ndedsvpp S Njpfx Aqwja -Feed distributor is disc-shaped (stainless steel), equipped with a protective cover, height adjustable, equipped with a hydraulic motor. - Power take-off of the hydraulic system - from the standard power take-off box of the vehicle. -Scraper-chain sand (salt) feeding is equipped with a hydraulic motor, with protection against ingress of small foreign objects. - Adjustment of scattering ‘right-left-proportional’. - Control (ON/OFF) from the driver's cab.

Condition: new, functionality: fully functional, Year of construction: 2026, RPS-6000/9000 SALT & SAND SPREADER TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair and maintenance of asphalt concrete surfaces. Salt and Sand Spreader RPS-6000/9000 TM TICAB is a perfect solution for de-icing the streets and highways. New Salt and Sand Spreaders RPS-6000/9000 with 6 m3/9m3 capacity are made for spreading de-icing agents. Allowable outside temperature is to -40°С. The spreader should be mounted on a truck using a crane. The salt spreader RPS-6000/9000 is a prospective investment. Fits any truck. Ndjdpfx Aot N Ty Tjqwja Technical Specifications ● Recommended velocity up to 30 km / h. ● The spreading density is 350 g/m2. ● The spreading width is up to 4-8 m. ● Width and density regulation from the Spreader body. ● Disc spreader stainless steel. Position regulating. ● Autonomous (diesel engine). ● Feed mechanism - conveyor chain. ● Adjusting the spreading angle. ● Protective awning. ● «ON» / «OFF» from the driver’s cab. ● In-cab adjustment of width and density of spreading. Service Terms ● In stock ● Warranty: 12 months ● Delivery: from the manufacturer’s warehouse ● Support: manual, technical assistance, video instructions

Condition: used, Year of construction: 2020, operating hours: 2,691 h, 2020 | Hydrema RB15-MX18 with tiltrotator, quick coupler and excavator bucket | Used Wheeled Excavator | 2691 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 113000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 47 approved ✅ 7 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Did not detect any issues during functional test. Machine in fair condition with some weak spots. Definitely engine oil leakage needs attention. Not road legal at the moment but can be registred as such.. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40781 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Nedpfoza Dxiox Aqweda 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), first registration: 04/2007, color: blue, suspension: air, Year of construction: 2007, Equipment: ABS, = More options and accessories = - Air suspension = Remarks = Royen/Ipsam Sucking and blowing dry substances Engine Volvo Penta TWD 1031VE Turbodiesel Powerpack 2x SIHI Vacumpump 3000m3/H Wittig Cycloonblower T5CDL12L71 3 axle BPW air suspension Belgium registration = More information = Axle brand: BPW Suspension: Air suspension Rear axle 1: Tire profile left: 50%; Tire profile right: 50% Ndedpfx Aqozbupnowja Rear axle 2: Tire profile left: 50%; Tire profile right: 50% Rear axle 3: Tire profile left: 50%; Tire profile right: 50% Technical condition: good Visual condition: good

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 1,000 mm, workpiece weight (max.): 50 kg, type of input current: AC, overall weight: 65 kg, table load: 50 kg, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, We are offering this very well-maintained KEYENCE VL-500 3D line scanner, manufactured in 2021. Manufacturer: KEYENCE Model: VL-500 Year of manufacture: 2021 Condition: very good Category ID: 402 Type ID: 1927 Machine type: 3D line scanner Included in the offer: 1 unit of control unit, part no. VL-500 1 unit of 500 mm base, part no. VL-550 1 unit of measuring head, part no. VL-570 Nodpfx Asy U Ngceqwjda 1 unit of accessories, including calibration plate, user manuals, part no. VL-A2D 1 unit of cover, part no. VL-C2 1 unit of Win10 PC for VL-500 series, part no. 972337 1 unit of comparative measurement module, part no. VL-H2P 3 units of AC power cables, part no. OP-99031 Condition is very good, as the scanner has rarely been used. Also included: Calibration certificate valid until 2025. If you have any questions or require further information, please send us a message or call us.

Year of construction: 2004, condition: good (used), Main Technical Specifications • Web width: max. 330 mm • Max. web speed: 200 m/min • Max. inspection speed: 150 m/min (100% inspection) • Unwind roll diameter: max. 700 mm • Rewind roll diameter: max. 500 mm • Core diameter: 76 mm (pneumatic expanding shafts) • Web tension control: 0.5 – 10 kg, steplessly adjustable • Electronic web guiding system (Fife with ultrasonic sensor) Slitting & Finishing Nedpoylynwjfx Aqwoda • Shear knife slitting unit • 3 top and 3 bottom knives included • Fine adjustment in 0.05 mm increments • Integrated edge trim extraction • Pneumatic splice unit • Integrated label and meter counter Inspection System fleyeVision print inspection system (100% inspection) • Matrix camera (1380 x 1040 pixels) • Flash illumination • Detection of print defects such as missing print, register deviation, spots, missing labels, missing text, matrix waste Inkjet System Imaje S8 Master 2.2G • Two nozzles per printhead • Suitable for marking up to four label lanes • Fully integrated into the central machine control system

Condition: ready for operation (used), Year of construction: 2001, MIOS T55, year 2001 Ndsdpfx Aqozqc Rwewoa MIOS T40, year 2001

Condition: like new (used), Supply voltage: 24 V DC Nsdpfezca Ursx Aqweda Application: Detection technology Height: 155 mm Width: 140 mm Depth: 135 mm Weight: 2780 g Condition: Like new

Condition: new, Year of construction: 2026, BIEGEMASTER double bender - Model XBend 6.1,25 Effective length: 6400 mm Nedpfxevhc Dpo Aqwsda Bending capacity Steel 400 N/mm²: 1.25 mm V2A 600 N/mm²: 1.00 mm Aluminum 190 N/mm²: 2.00 mm Clamping capacity (closed seam): 0.5 mm steel Number of uprights: 4 pieces Driven upper bending joints: 4 pieces Driven bending joints bottom: 4 pieces Incl. touchscreen CNC control with automatic depth stop Incl. electric shears BIEGEMASTER Up- and Down- Bending machine - model XBend 6.1,25 Working length: 6400 mm Bending capacity steel 400 N/mm²: 1.25 mm stainless steel 600 N/mm²: 1.00 mm aluminum 190 N/mm²: 2.00 mm Hemming capacity (closed hem): 0.5 mm steel Stands + Tension Arms: 4 pcs. Driven linkage joints upper beam: 4 pcs. Driven linkage joints down beam: 4 pcs. Incl. touchscreen control and automatic back-gauge Incl. electric cutter

Year of construction: 1999, condition: excellent (used), functionality: fully functional, machine/vehicle number: M16155, Plotter/cutter for creating packaging designs, complete with server and CAD software (ARTIOSCAD). Ndodpfozkbadjx Aqwea Working area: 1300 x 1600 mm.

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Nedpfsyqxxxex Aqwjda Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Year of construction: 2024, condition: used, New: Yes Empty weight: 35 kg Ndsdpfx Aeyaf Sqeqwoa Dimensions of cargo space: 51 x 20 x 85 cm Serial number: 9305082 Please contact Team DPX for more information New cabinet with DSE6120 panel and CHINT NM1LE-125S breaker 40A. Completely wired 2 units available

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 8,999 kg, first registration: 04/2026, loading space length: 20,640 mm, loading space width: 2,540 mm, loading space height: 2,830 mm, total length: 20,640 mm, total width: 2,540 mm, total height: 2,830 mm, suspension: air, tire size: 385/65-R22.5, color: red, Year of construction: 2026, Equipment: ABS, = Additional Options and Accessories = - BPW axles Nodpfx Aqey R D Awowoda - EBS - Lift axle - Air suspension - Drum brakes = Notes = New and unused Kässbohrer flatbed semi-trailer with ABS/EBS. BPW axles with drum brakes, extendable to 6.90 m, 3rd axle = steering axle (trailing axle), hardwood floor with 6 twist locks per side, 11 lashing points per side, 10 stake pockets per side, lashing points in the longitudinal beams, 1 toolbox, steps on the right, unladen weight: 10,170 kg, permissible total weight: 45,000 kg, tires: 385/65-R22.5 (L: 16/16/16 mm; R: 16/16/16 mm), Dutch registration with a valid main inspection until 04/29/2027, year of manufacture: 11/2022 = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW DRUM Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Lift axle; Max. axle load: 9,000 kg; Tire tread left: 100%; Tire tread right: 100% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 100%; Tire tread right: 100% Rear axle 3: Max. axle load: 8,999 kg; Steered; Tire tread left: 100%; Tire tread right: 100% Weights Unladen weight: 10,170 kg Payload: 34,830 kg GVW: 45,000 kg Functional Body brand: Kässbohrer LB3E Extendable body: Yes Maintenance, History and Condition APK (technical inspection): valid until 04/2027 Technical condition: very good Optical condition: very good Identification License plate: OX-76-GJ Further Information Please contact Arne Honingh for more information.