Used Plate Machine for sale (71,137)

Condition: excellent (used), Technical specifications: Gsdpfx Aszbcwmjafsuf Retrofit in 2026 Working length: 2550 mm Max. bending capacity: 6.0 mm Bending allowance: 4.0 mm Diameter of upper roller: 200 mm Diameter of lower roller: 180 mm Hydraulic folding bearing Taper bending device Control panel with digital display Motor power: 5.5 kW Dimensions (length x width x height): approx. 3600 x 1150 x 1250 mm Weight: approx. 4.5 tons Condition: Very good, retrofit in 2026 The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2017, Technical specifications: Working width: 6500 mm Max. bending capacity: 4.0 mm Max. bending allowance: 3.0 mm CNC control Diameter of top roller: 420 mm Diameter of side rollers: 300 mm Gsdpfxszfvvvj Aafouf Diameter of center bottom roller: 400 mm Conical bending unit through angled positioning of the two side rollers Mobile control panel with digital display Hydraulic folding bearings CE marking Motor power: 22 kW Dimensions (length x width x height): approx. 9200 x 2350 x 1900 mm Weight: approx. 29 tons Optional equipment: Second top roller diameter: 350 mm Side bending aid Condition: Very good condition, little used.

Condition: like new (used), Year of construction: 2001, Technical data: Working width: 2050 mm Max. bending capacity for normal steel St40: 4.0 mm Max. edge bending for normal steel St40: 2.0 mm CNC control: MG Diameter of top roller: 140 mm Diameter of side bottom rollers: 105 mm Diameter of central bottom roller: 130 mm Conical bending device Working height: 800 mm Mobile control panel Hydraulic folding bearings CE marking Motor power: 3 kW Dimensions (length x width x height): approx. 3400 x 1200 x 1200 mm Weight: approx. 2.5 tons Gujdeza D U Dopfx Aafef Condition: Very good condition, very little use The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Godsx Ii Hvopfx Aafsuf Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Technical specifications: Working width: 4050 mm Max. bending capacity: 6.0 mm Max. pre-bending: 4.0 mm Top roller diameter: 210 mm Side lower roller diameter: 210 mm Middle lower roller diameter: 210 mm Conical bending device by tilting the two side rollers Gusdpfx Aowkaaloafjf Hydraulic folding bearings Pivoting control panel with digital display Dimensions (length x width x height): approx. 6900 x 2300 x 1800 mm Weight: approx. 14 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2006, Technical specifications: Working width: 2100 mm Bending capacity: 28.0 mm Springback: 22.0 mm CNC control Diameter of upper roller: 350 mm Diameter of middle roller: 330 mm Diameter of side rollers: 240 mm Gedjx Dtt Aopfx Aafeuf Hardened rollers Conical bending unit by inclining the two side rollers Mobile control panel with digital display Motor power: 7.5 kW CE marking Dimensions (length x width x height): approx. 3600 x 1500 x 1500 mm Weight: approx. 14.5 tons The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear and tear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Code: 0462 Brand: SERRMAC Model: V 22 - CE Standard Pillar drill with swivel table for machine shops, workshops, carpentry shops, and other applications - CE Standard Technical data: Sturdy construction Drilling capacity in steel diameter 22 mm Spindle taper cm2 Spindle stroke 90 mm Column diameter 98 mm Distance from column to spindle center 201 mm Table 350 x 250 mm Spindle speed 255/380/420/560/630/660/950/990/1090/2380/2590/3850 rpm Godpfx Aezp Exzsafouf Motor power 0,55 Kw Overall dimensions mm 400 x 750 x 1700 h Weight kg 170

Condition: used, functionality: fully functional, Year of construction: 1992, machine/vehicle number: 10842, We are offering this pre-owned sheet metal rolling machine Chr. Häusler VRM-hy 3000x15, year of manufacture 1992. Model: VRM-hy 3000×15 Serial number: WO 10842 Year of manufacture: 1992 Godpfex Sqc Tox Aafjuf If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Three-roll bending machine KNUTH KRM 12/2.5, serial number 121008, manufactured in 2000, roll length 125 cm. Gedpfxsznl Aqs Aafouf

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm Guodoibq Itjpfx Aafof sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: used, Clamping cube for radial drilling machine Clamping plate, clamping cube, clamping block Clamping surface on top: L x W = 600 x 500 mm Clamping surface on the side: L x H = 600 x 460 mm Overall height: 505 mm Gusdpfxezinz So Aafof T-slots: 20 mm T-slot spacing: 150 mm Overall dimensions L x W x H: 680 x 500 x 505 mm Weight: 150 kg Good condition

Condition: used, sheet width 1050 mm Gjdpfozfayfjx Aafsuf plate thickness 2,5 bei 400N/mm² mm roll diameter 90 mm Weight ca. 490 kg Motorised three-roll round bending machine in an asymmetrical configuration. Upper roll swivels forwards Bending roll adjustment via handwheel; suitable for conical bending Emergency stop cord The machine comes from a training workshop and is in very good condition

Condition: used, Measuring machine with manually operated measuring arm STIEFELMAYER Measuring and marking plate made of cast steel/grey cast iron, heavily ribbed High-precision measuring plate with quality surface finish Guodpfxspwpxco Aafjf Year of manufacture: 1985 Length: 2000 mm Width: 1500 mm Thickness: 350 mm Plate thickness (top): 50 mm solid material with 300 mm ribs Working height: approx. 800 mm - with manually movable measuring arm, measuring range X=1490 mm, Y=1000 mm, Z=1250 mm - with 3-axis digital readout Grundig MZ 1030 - machined side surface at 90° angle to the table top, 2000 x 350 mm - 5 height-adjustable feet Required space (L x W x H): 2000 x 1500 x 2500 mm Weight: approx. 2600 kg In good condition

Condition: new, number of rollers: 4, – 4 rollers – Capacity: 1270 x 4/5 mm – Pre-bending capacity: 1270 x 3/4 mm – Hardened rollers – Conical rollers – Diameter of the top roller: 130 mm – Diameter of the bottom roller: 130 mm – Diameter of the side rollers: 130 mm – Digital display for the movement of the left roller – Digital display for the movement of the middle bottom roller – Digital display for the movement of the right roller – Top roller can be pivoted out hydraulically – Steel construction ST-52 – Overload protection Guedpfjxytlqjx Aafsf – Documentation – 400V

Condition: good (used), functionality: fully functional, Year of construction: 2015, Four-Roller Plate Rolling Machine Manufacturer: FACCIN Model: 4HEL 2122 Year: 2015 Technical Specifications Brand: FACCIN Model: 4HEL 2122 Year of manufacture: 2015 Working width: 2050 mm Roll geometry: Linear guides Top roll diameter: 225 mm Bottom roll diameter: 210 mm Side roll diameter: 165 mm Bending force against top roll: 100 t Motor power: 9 kW Dimensions (approx.): L 3.50 x W 1.20 x H 1.10 m Weight (approx.): 4,200 kg Performance Rolling capacity (full working width): 12 mm Pre-bending capacity (full working width): 8 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Godpfxezguums Aafsuf Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 295 mm With yield strength: 260 N/mm² Rolling capacity (full working width): 8 mm Pre-bending capacity (full working width): 6 mm From tube diameter: 1,125 mm With yield strength: 360 N/mm² Rolling capacity (full working width): 6.5 mm Pre-bending capacity (full working width): 5 mm From tube diameter: 295 mm With yield strength: 360 N/mm² Rolling capacity (half working width): 15 mm Pre-bending capacity (half working width): 10 mm From tube diameter: 1,125 mm With yield strength: 260 N/mm² Equipment - Double linear guide system for roller movement - Extra wide bearing blocks - MCS double bearing system for roll rotation - Extra heavy-duty, doubly supported drop end bearing - Electronic parallelism system (EPS) - Hardened rolls for maximum wear protection and reduced sheet damage - All rolls polished after heat treatment - SIEMENS S7 PLC touch control - Safety cable with emergency stop and CE certification - Water cooler for hydraulic unit All details without guarantee. A live demonstration under power is possible at any time in our showroom.

Condition: used, functionality: fully functional, Year of construction: 2000, control type: CNC control, roller (bottom) diameter: 210 mm, roller (top) diameter: 205 mm, side roll diameter: 170 mm, roller length: 1,100 mm, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 8 mm, power: 5.5 kW (7.48 HP), Equipment: cone bending device, emergency stop, hardened rollers, 4 – Roll bending machine Manufacturer: STÖLTING, Type: VB 322 Year of manufacture: 2000 Technical data Manufacturer: STÖLTING Type: VB 322 Year of manufacture: 2000 Guedezgf Rxspfx Aafof Bending length: 1100 mm Sheet thickness: 12 mm Bending allowance: 8 mm Upper roll diameter: 205 mm Lower roll diameter: 210 mm Side roll diameter: 169 mm Main motor: 5.5 kW Weight: approx. 3200 kg Equipment • CNC control • Conical bending device • Operating manual All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Plate assembly, clamping plate with T-slots 8000 x 2100 mm, 2-piece Godpfxozc Nt Do Aafsuf Clamping surface: Length: 8000 x Width 2100 mm Plate thickness: 360 mm - Consisting of 2 clamping plates with 7 T-slots each (Length 4000 x Width 2100 x Plate thickness 360 mm) Transport dimensions: 2 plates stacked on top of each other Plate assembly: Length 4000 mm x Width 2100 mm x Height approx. 900 mm Transport weight of plate assembly: approx. 14 tons Good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, roller (top) diameter: 130 mm, side roll diameter: 110 mm, working width: 1,030 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 2.2 kW (2.99 HP), number of digital displays: 3, Equipment: emergency stop, foot remote control, 4-Roll Round Bending Machine Manufacturer: Sahinler, Type: 4RM 10-130 HRC Year of Manufacture: 2008 Technical Data Manufacturer: Sahinler Type: 4RM 10-130 HRC Year of Manufacture: 2008 Usable Length: 1030 mm Top Roll Diameter: 130 mm Guedpfx Aozcpu Ueafef Side Roll Diameter: 110 mm Sheet Thickness (without pre-bending): 6 mm Sheet Thickness (with pre-bending): 5 mm Total Power: 2.2 kW Dimensions: 2.4 x 1 x 1 m Weight: approx. 1.5 t Equipment • Hardened rolls • Digital display for roll positioning All information without guarantee.

Condition: new, Year of construction: 2023, neu 2023 9656 prompt, Zwischenverkauf v Türkei 2600 € 1 1 Guodjwira Uopfx Aafof 1050 mm 1 mm 56 mm 1400 mm 700 mm 1120 mm 185 kg 3 Walzen asymmetric rolls - prebending longitudinal grooves in lower and lateral roll Infeed of the lower roller by a central lever - with gear reduction machine stand user manual in GERMAN orENGLISH

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4900 € 109.71 € 1050 mm 3 mm 2 mm 90 mm 2080 mm 700 mm 1250 mm 410 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by handwheel lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll conical rolling device user manual in GERMAN Gusdpfx Aaswirv Njfef

Condition: new, functionality: fully functional, Year of construction: 2025, machine/vehicle number: plate roll, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: MG EVO, controller model: EVO 4 AXIS, number of rollers: 4, roller (bottom) diameter: 140 mm, roller (top) diameter: 160 mm, side roll diameter: 150 mm, roller diameter: 200 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 700 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, overall weight: 2,200 kg, total length: 3,200 mm, total width: 1,100 mm, total height: 1,200 mm, power: 4 kW (5.44 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4 ROLL BRAND MG ITALY, HYDRAULIC MODEL M2006P EVO_CNC PLATE BENDING ROLL PLANETARY DESIGN DOUBLE PINCH PRE-BENDING CNC_EVO PROGRAMMABLE AUTOCALCULATION AUTOMATIC PLATE ROLLING Capacity: -Width of plate: 2000 mm -Thickness of plate rolling 6 mm -Thickness of plate pre-bending 4 mm Godpfx Asw Dnd Seafsuf Rolls -useful width mm. 2050 -Top roll mm. 160 - Lower roll mm. 140 Configuration installed: • Surface hardening of the four rolls, smooth finishing suitable for stainless plates rolling • Dual pre-pinch, with adjustable force upon the input of plate thickness • Conical bending hydraulic attachment - hardened contrast pad. • Power driven rolls rotation top/bottom gearbox axial direct drive hydraulic each roll. • Calibration system for re-rolling of welded shells rounding. • Console electric independent with centralized commands joysticks and CNC screen readout. • CNC controller on touch screen 15” , CAD/CAM interface 4 axis auto calculation software package. with digital readout of the axis for use in manual rolling, semiautomatic and fully automatic programmable. • Opening front side hydraulic drop-end to unload closed shells. • Variable working speed step-less axis interpolation. • Safety installation with emergency stop. • Instruction manuals for operation and service.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 10 h, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 130 mm, roller (top) diameter: 130 mm, roller diameter: 130 mm, roller length: 2,050 mm, working width: 2,050 mm, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, overall weight: 1,500 kg, total length: 3,200 mm, total width: 750 mm, total height: 1,000 mm, power: 2.2 kW (2.99 HP), Equipment: cone bending device, foot remote control, swiveling upper roller, For sale is a high-quality 3-roller sheet metal rolling machine, Sahinler IRM 2050 x 130, with an electric drive. The machine was only purchased for one project and has approximately 10 operating hours. Technically and visually, it is in almost new condition. Guodszdnfmspfx Aafsf Particularly practical: The machine is equipped with heavy-duty rollers, making it mobile and allowing for flexible movement within the workshop. Technical data: Manufacturer: Sahinler Type: IRM 2050 x 130 Year of manufacture: 2022 Operating hours: approx. 10 h Usable sheet metal length: 2,050 mm Maximum sheet metal thickness: 3 mm Roller diameter: 130 mm Drive power: 2.2 kW Weight: approx. 1,500 kg Dimensions (L x W x H): 3,200 x 750 x 1,000 mm Equipment: 3-roller design Asymmetrical roller arrangement with pre-bending function 2 driven rollers with brake motor Swiveling top roller forward Forward and reverse operation Conical rounding by tilting the rear roller Mobile control panel Mobile thanks to retrofitted heavy-duty rollers The machine is ready for immediate use and can be inspected by arrangement. If you are interested or have any questions, please do not hesitate to contact me.

Condition: used, Clamping plate, clamping table, machine table – HOME-MADE Can also be used as a straightening plate or welding plate. Table surface: 2150 x 1040 mm Gsdpfx Astqgnyjafeuf Overall height: 200 mm - Top and bottom surfaces are parallel and machined, surfaces are planed. - Table plate dimensions: L x W x H = 2150 x 1040 x 65 mm - Table plate has several symmetrical holes. Table plate with M16 and M24 threaded holes: M16, M24, M16, M24, etc. Hole spacing in the length: approx. 250 mm Hole spacing in the width: approx. 255 / 165 / 255 mm - 6 double T-beams welded onto the steel plate. Double T-beam dimensions: L x W x H 2150 x 125 x 135 mm Distance between the double T-beams: 50 to 55 mm Weight: 1730 kg Good condition.

Condition: ready for operation (used), 1 x Davi round edge rolling machine / plate rolling machine / iron four-roll bending machine / 4-roll machine (English: Davi 4-roller bending machine) Guedpfx Aaoymnzbjfef 4 rolls, 3.6 m x 95 mm thick. Video available via WhatsApp/Messenger/Viber. Inspection welcome near D-24983 Handewitt. Year of manufacture 2009 - in operation since 2010. More information available upon request.

Condition: used, Year of construction: 2004, total length: 4,400 mm, total width: 1,300 mm, total height: 1,200 mm, Colour: Grey Empty weight: 2.500 kg - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20440160 - Drive system: Conventional - Drive: Hydraulic - Number of rolls [pcs.]: 4 - Number of driven rolls [pcs]: 4 - Power [kW]: 5.5 - Max. sheet thickness [mm]: 4 - Max. prebending thickness [mm]: 3.5 - Max. working width [mm]: 3100 - Top roll diameter [mm]: 170 - Bottom roll diameter [mm]: 160 - Options: Digital readout, Cone rolling - Transport dimensions: 4400mm x 1300mm x 1200mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Gusdpfxsyym Tdo Aafof Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum