Used Plate Drill for sale (16,974)

Condition: good (used), Year of construction: 2006, sheet width 3100 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3120 mm down holder 14 Stück cutting angle 1°5 no. of strokes 14 Hub/min control ENC 100 table width 500 mm work height max. 880 mm oil volume 170 ltr. total power requirement 11.0 KW weight 5550 kg range L-W-H 3750 x 1950 x 1650 mm Machine was used for ALU processing no "heavy" sheet metal processing good condition (!) new price ~ 32.000 Euro - in checked conditions - machinevideo - ?v=o2LW7L2r7Xs ----- Swing cut guillotine shear with fixed cutting angle * with DURMA ENC 100 NC control unit * manual cutting gap adjustment from the front ----- Equipment: - electro-hydraulic guillotine shears "swing cut" - with DURMA "ENC 100 NC" control unit * Backgauge preselection - X axis * Number of pieces (in automatic mode) * Control panel, front left * Retraction from backgauge on/off * Input of target/actual value procedure with button - NC electro-motorized backgauge (X axis) * on recirculating ball screws * Traversing speed 120 mm/sec. - Manual cutting gap adjustment, from the front - hydraulically acting hold-down device - 1x side stop 1,000 mm - 2x front support arms - Ball rollers in the front support table Dkjdpfxoycxgmj Aa Hjt - Light barrier behind the machine (safety device) - 1x free-moving foot switch - Rear sheet metal chute - Operating instructions

Condition: good (used), Year of construction: 2015, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.0 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current list price: approx. 20.000 euros From a maintenance workshop Features: - Robust / high-performance electromechanical guillotine shear - Manual material backgauge * Continuously adjustable range * Adjustment from the back via handwheel * Includes mm scale Dsdpfx Aaozd Hb Hs Hekt * Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front - 1x side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal chute - rear safety device (light barrier) - operating instructions (machine control system) - Transport stand (homemade)

Condition: ready for operation (used), Year of construction: 2004, sheet width 3050 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm cutting angle 0.5 - 2.5 ° no. of strokes 8 - 25 Hub/min back stop - adjustable max. 1.000 mm Control SIEMENS Number of downholders 13 Stk. oil volume 300 ltr. engine output 21.0 kW weight 8700 kg. Dedpjzkvx Ujfx Aa Hekt range L-W-H 3950 x 2200 x 1900 mm Features: - Robust electro-hydraulic sheet metal shear * Design: "Circuit-guided" - NC electro-motorized backgauge * with SIEMENS NC control unit "OP 7" * Input of target and actual position values - NC electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front via handwheel - Recessed grips in the front support table - Front finger guard - 1x long side fence - 1x long support arm - 1x freely movable foot switch - Original operating instructions (NL)

Condition: good (used), Year of construction: 2006, Boring power 35.0 / 40.0 mm bore capacity in cast iron 50.0 mm threading M 30 bore stroke 150 mm Size of table plate 730 x 210 mm Center of spindle to wall or column 280 mm Speed 80.0 - 1.400 U/min Dsdpfx Aaszl E Ubj Hokt distance spindle /table 85 - 755 mm spindle taper MT 4 MK column diameter 120 mm feed 0.1 / 0.2 / 0.3 mm/U voltage 400 V Motor output 1.3 / 2.3 KW weight of the machine ca. 350 kg range L-W-H 800 x 600 x 2020 mm Original price, including accessories: approx. 20.000 euros Special price available upon request Features: - Heavy-duty, versatile column drill press - Electric table height adjustment - Cross slide 730 x 210 mm ... with digital display - Machined base plate with T-slots - Automatic spindle feed - Fixed drilling depth stop - Stepless speed adjustment - Pole-changing motor - Thread-cutting device - Quick-release drill chuck with tapered shank - User manual (PDF)

Condition: used, sheet width 1050 mm plate thickness 4.0 mm thickness at "Niro-steel" 3.0 mm distance between columns 1200 mm blade length 1150 mm no. of strokes 46 - 69 Hub/min cutting angle 1.30 ° Control konv. oil volume 100 ltr. total power requirement 5.68 kW weight 1100 kg From a maintenance workshop In good condition (!!) Dkodpfx Aasy Raimj Hjt Features: - Robust electro-hydraulic sheet metal shear - Electric motor-driven backgauge * Backlash-free ball screw for backgauge * Travel speed 100 mm/sec - Electric cutting length limiter * Cutting length limiter to increase the stroke rate per minute - Manual cutting gap adjustment (lateral adjustment) - Front support table with recessed grips - Front finger/interference guard - 1x side stop with T-slot and millimeter scale - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF)

Condition: new, Year of construction: 2025, sheet width 1320 mm plate thickness 2.5 mm ST thickness at "Niro-steel" 1.2 mm blade length 1350 mm no. of strokes 34 Hub/min back stop - adjustable max. 825 mm cutting angle 1.5 ° work height max. 810 mm Control konv. engine output 3.0 kW weight 1100 kg range L-W-H 1950 x 1450 (2000) x 1200 mm Exhibition machine - like new Never been used (!!) Special price upon request Features: - Robust electro-mechanical sheet metal shear - Heavy-duty / robust drive motor Dkedpfx Aexabz Hja Hst - Manual backgauge, including analog position indicator * Adjustment range max. 825 mm - Manual cutting gap adjustment - 2x table side stops including mm scale - 1x front stop bar - manually adjustable - 2x front support arms - Grip recess in the front work table - 1x freely movable foot switch, including emergency stop button - Control cabinet/operating panel - front right - Rear safety device - Rear sheet chute - Connection cable + plug

Condition: new, bore capacity in steel (diameter) 40.0 mm threading 30 M workpiece height max. 380 - 785 mm arm length 985 mm spindle taper 4 MK boring head swiweling right/left -80 / +80 Grad table surface area 1210 x 520 mm turning speeds 50 - 2000 U/min Dkodpjxaadyefx Aa Het column diameter 220 mm column diameter 220 mm table surface area 1210 x 510 mm quill stroke 200 mm feed range - spindle 0.08 - 0.50 mm/U total power requirement 2.2 kW weight of the machine ca. 2800 kg dimensions of the machine ca. 2450 x 1200 x 2720 mm characteristics - A variety of clamping and machining options thanks to the construction-related construction - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in the Basic equipment included - Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces - Digital speed and drilling depth display included in the scope of delivery - Quick set-up of the drill head on the workpiece, the clamping takes place hydraulically - Heavily ribbed column ensures great rigidity of the boom - Stable construction guarantees vibration-free work - As standard with electronically infinitely variable speed control scope of delivery - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electromotive drill head adjustment - First filling with Shell Tellus 46 - Keyless chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, 4/2, 3/1 - Thread cutting device - LED machine light - coolant device - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 180 mm bore stroke 80.0 mm morse taper 2 MK turning speeds 180 - 2270 U/min Dkodpfexaa Thex Aa Hjt table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16.0 mm column diameter 72.0 mm voltage 400 V total power requirement 1.10 kW weight 57.0 kg range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Condition: used, Year of construction: 2008, sheet width 1530 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.0 mm no. of strokes max. 34 Hub/min cutting angle 2.70 Grad distance between columns 1540 mm Dksdpjxyln Rjfx Aa Hst work height max. 920 mm Control konv. voltage 400 V engine output 3.2 kW weight of the machine ca. 1115 kg. range L-W-H 2275 x 2220 x 1400 mm Features: - Robust motorized swing-arm guillotine shear - Break-resistant, torsion-resistant welded steel construction - Compact and easy-to-use machine design - Manual backgauge, adjustable from the rear * Stepless adjustment across the entire travel range - 1x hold-down bar - 1x freely movable foot switch - Front, extendable table extension - Rear safety device - Original operating instructions * Optional accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: new, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 120 mm morse taper 3 MK table: 515 x 360 mm turning speeds 160 - 2250 U/min column diameter 115 mm feed 0.10 + 0.20 mm/U T-slots 2 x 14 x 224 mm distance spindle /table 117 / 701 mm engine output 1.45 / 1.90 kW weight 285 kg Machine height 1840 mm NEW ALZMETALL MODEL RANGE Dkjdpsxab Rhefx Aa Hst 7 "TFT - LCD display with touch function: * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - automatic spindle feed with feed overload protection - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black including special accessories: - 25. Coolant system B.

Condition: excellent (used), Year of construction: 1999, bore capacity in steel (diameter) 36.0 mm Dkodpfx Aasy Agpqs Het bore capacity in cast iron 45.0 mm throat 300 mm bore stroke 160 mm 4 speeds 120-900 / 240 - 1780 U/min column diameter 145 mm table-size 615 x 460 mm feed 0.1 / 0.2 / 0.3 / 0.4 mm/U total power requirement 1.75 / 2.5 kW weight 440 kg dimensions 1200 x 800 x 2300 mm well-maintained condition (!!) current new price approx. 18.000 Euro special price on request Equipment: - robust pillar drill (V-belt) - electromagnetic feed clutch = spindle feed * with overload protection and electrical handle cross circuit - mushroom pushbutton (latching) for EMERGENCY STOP, in the front panel - electric stepless speed adjustment - Digital speed display - clockwise rotation of the drill spindle - pole-changing drive motor - Infinitely adjustable drilling depth stop - Work table with 2x T-slots - height-adjustable - Operating instructions in German

Condition: good (used), Year of construction: 1981, sheet width - max. 2535 mm plate thickness 4.0 mm ST plate thickness 2.5 mm VA plate thickness 6.0 mm ALU number of strokes - loaded 20 Hub/min cutting angle 1.7 ° Dkodpfsxabvqsx Aa Hot work height max. 900 mm total power requirement 8.5 kW weight of the machine ca. 3400 kg range L-W-H 2916 x 2250 x 1760 mm Machine from training workshop Good/well-maintained condition (!!) Features: - Robust electro-hydraulic guillotine shear “swing cut” - Electric motorized backgauge - Electric cutting length limiter - Electro-hydraulic cutting angle adjustment - Manual cutting gap adjustment - from the front - Front support table incl. recessed handles - 1x stable side stop, with scale and tilt cam - 3x stable front support arms - 1x freely movable foot switch - Front finger guard - EMERGENCY STOP button at the front - Operating instructions * Special accessories included: - Pneumatic sheet metal holding device for thin sheet metal cuts

Condition: good (used), Year of construction: 1979, bore capacity in steel (diameter) 35.0 / 40.0 mm throat 300 mm bore stroke 180 mm turning speeds 110 - 1450 U/min table-size Ø 455 mm column diameter 155 mm feed 0.1 / 0.2 / 0.3 m/min spindle taper MT 4 MK engine output 1.5 kW weight 450 kg range L-W-H 800 x 650 x 1850 mm Features: - Heavy-duty column drill press (V-belt drive) - Automatic spindle feed - Infinitely variable speed control - Fixed depth stop - Round machine table with T-slots * Height-adjustable via hand crank * Rotatable - Emergency stop button on the front - Coolant system with separate reservoir - Operatorâ??s manual Dedpfxjzl E Tks Aa Hokt

Condition: good (used), Year of construction: 1997, bore capacity in steel (diameter) 40.0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 415 x 350 mm turning speeds 160 - 2.250 U/min Dkodezl E T Ropfx Aa Hjt column diameter 115 mm total power requirement 1.45 / 1.90 kW weight 285 kg range L-W-H 500 x 800 x 1920 mm Features: - Heavy-duty column drill press - Continuously variable speed control (V-belt) - Pole-changing motor - Fixed drilling depth stop - Machine table with 2 T-slots * Height-adjustable via hand crank - Mushroom-head pushbutton (latching) for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - User manual (PDF)

Condition: ready for operation (used), Year of construction: 2006, sheet width 3030 mm plate thickness 3.00 mm thickness at "Niro-steel" 1.50 mm no. of strokes 34 Hub/min cutting angle 1.6 Grad table height 820 mm distance between columns 3120 mm Djdjzn Ahdepfx Aa Hskt Control POS 100 engine output 2x 4.0 kW weight of the machine ca. 3600 kg range L-W-H 4329 x 2350 x 1600 mm Current list price, including accessories: approx. 65,000 euros (!!) Special price available upon request The PDC motorized guillotine shear is the reinforced version of the MHSU. It offers greater performance thanks to a more robust design and a "DUO-CUT drive" on both sides. - in checked conditions - machinevideo - ?v=XdcxLlr_nWc Features: - Robust, motorized oscillating-cut guillotine shear - NC-controlled electric motor-driven backgauge * with SCHRÃ?DER POS 100 NC control system * digital position display for the backgauge * adjustable from the front right * with setpoint/actual value input * stepless adjustment over the entire travel range * Limit values secured with limit switches * 9-program programming possible - Break-resistant, torsion-free welded steel construction - Compact and well-organized machine design - All-steel blades - 1x hold-down bar - 1x long side stop with â??ELGOâ? digital display - 2x front support arms, adjustable â??Sliding Systemâ? - Work table with recessed handles - Rear safety guard - 2x emergency stop buttons at the front - 1x freely movable foot switch - Operating instructions (PDF) Special accessories included: - Sheet metal holding device for thin sheet metal blanks

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s Dkedpozycpxsfx Aa Hot down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks

Condition: used, machine/vehicle number: 007842, X axis working area: 5000 mm Y axis working area: 1200 mm Dkodpjyhbiujfx Aa Hst Working Table: Pod and Rail Main Electrospindle power: 18 KW Number of controlled axes: 4 axes Maximum edge height: 64 mm Total number of drilling spindles: 14 Total number of tool changer positions: 18

Condition: used, machine/vehicle number: 008495, X axis working area: 4175 mm Y axis working area: 1550 mm Working Table: Pod and Rail Dksdpfxoy Edqqs Aa Hst Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Maximum edge height: 45 mm Total number of drilling spindles: 21 Total number of tool changer positions: 12

Condition: good (used), Reamer, twist drill, drill bit -Twist drill: Ø 75 mm -Recording: MK5 -on request: different sizes/quantities available from further stock -Dimensions: Ø 75 x 600 mm -Weight: 8.6 kg Dedpfex R Sz Isx Aa Hskt

Condition: like new (used), functionality: fully functional, 2x 2.92m2 Plate Heat Exchanger and Miscellaneous Spares (Unused) 1x plate type condensate blowdown cooler, surface 2.9M2 SA-516 GR.70N material 13 barg design pressure -20 / 150 deg c design pressure 12 plates E1958 Tag 1x plate type process steam condensate cooler, surface 2.9M2 SA-516 GR.70N material 14 barg design pressure -20 / 150 deg c design pressure 12 plates E2901 Tag 2x tightening bar E1958 SL002, E2901 SL002 Part No 10x gasket EPDM E1958 SL001, E2901 SL001 Part No Dodpfx Aaszwx Tns Hskt 2x startup & commissioning spares E1958-1, E2901-1 Part No

Condition: excellent (used), Year of construction: 1988, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 370 mm, roller (top) diameter: 370 mm, side roll diameter: 280 mm, sheet thickness (max.): 20 mm, overall weight: 13,500 kg, total length: 6,900 mm, total width: 2,100 mm, total height: 2,100 mm, New ( 2026) Digital read out position side rolls Hydraulic drop end Minimum bending diameter 420 mm Full hydraulic machine Roll quality C60 900N/mm2 Rolling width: 3100mm Rolling thickness 3x toproll Ø:15mm Rolling thickness 5x toproll Ø:20mm Rolling thickness prebending: 12mm Top Roll Ø: 370mm Bottom Roll Ø: 370mm Side roll Ø: 280mm Number of rolls: 4 Rolling speed: 0 - 4 Adjustiment lower roll: 0 - 700mm/min. Adjustment side rolls: 0 - 200mm/min. Number of driven rolls: 2 Power: 15kW Dkjdpfx Aezxxgwea Het Length: 6900mm Width: 2100mm Height: 2100mm Weight: 13500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2006, machine/vehicle number: 1799-260030, KNUTH WF 1 Universal Tool Milling Machine Dsdpfx Aaezyy R Hs Hskt The KNUTH WF 1 is a compact universal tool milling machine for milling and drilling operations. In addition to the horizontal work table, the WF 1 has an additional vertical table, which provides a wide range of clamping and machining options. The vertical milling head can be swivelled by ±45° and has a manually adjustable quill with a stroke of 60 mm. Both spindles have a robust ISO 40 (SK40) tool holder. With travel distances of 300 x 200 x 350 mm, eight feed stages and separate speed ranges for horizontal and vertical machining, the machine offers high flexibility for a wide range of machining tasks. Technical data Work table: 270 x 700 mm T-slot spacing: 50 mm Vertical table: 260 x 710 mm T-slots, vertical table: 2 x 12 mm Speed, horizontal: 110 – 1,230 rpm Speed, vertical: 150 – 1,660 rpm Quill travel, vertical: 60 mm Main motor: 3.0 kW Dimensions: 1,342 x 1,380 x 1,670 mm Net weight: approx. 900 kg

Condition: excellent (used), Year of construction: 1988, taper MK 5 spindle diameter 60 mm Dedpfx Aaszmixmo Hskt feed ja m/min weight of the machine ca. 1,1 t

Condition: used, Year of construction: 1970, 3 -- Dedjzycrmspfx Aa Hokt -- --

Condition: excellent (used), Attachment holders, standard holders and accessories, spiral drill bits, BILZ spiral drill bits, reaming bits, BILZ reamers, BILZ holders, tool holders, drill bit mounts, twist drills -Mounted tool holder: 8 pieces -Recordings: MK5, MK4, MK3 -Spiral drill bits: 35 pieces -Sizes: Ø38 mm - Ø95 mm Dkedpfx Aoyrgwxoa Het -Dimensions: see photos -Submission/Price: complete -Transport dimensions: 550/300/H70 mm -Weight: 28 kg