Used Pipe Line for sale (12,769)

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 36,000 bph at 1.5L water - 35,000 bph at 1.5L soft drinks (sweet) - 32,000 bph at 1.5L soft drinks (light) - Formats: - 0.5L and 1.5L bottles - PCO 28-1881 closure - Filling product: - Water and carbonated soft drinks (7.5g CO₂) - Closure system: - Screw caps, fed via chute and tipper (Zalkin + NSM) - Packing: - Shrink pack: 3x2 bottles (double lane) - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) - Electrical specs: - 400 V / 50 Hz - Control systems: ABB, Siemens - Operating direction: Standard Scope of Delivery  - Blow moulder: SIG Corpoplast Blomax 24, year 2008 Lrjdpfx Abewh U Avjysu - 24 stations, heating oven with 20 boxes, ABB control - Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK - Air conveyor: NTS Mistral, year 2000 - Pneumatic adjustable rails, basket cable tray - Filler: KHS Innofill EV-VF, year 2000 - 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel - Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) - Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000 -  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps - Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 - 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version - Inspection & Coding: - Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 - Bottle laser coding: Videojet with housing - Pack inspection: KHS Innocheck CUB, year 2015 - Packing machine: Kisters SP060V, year 2000 - Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only - Conveyors & Pack labelling: - Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication - Pack conveyor: Paxona + Schaefer, year 2009 - Pack labelling: Contact 100, self-adhesive label from reel

Condition: new, tube diameter 1/2 - 2.0 Zoll wall strength 2.75 - 4.5 mm ST pressure 10.0 t weight of the machine ca. 46.0 kg With a hinged bending frame for efficient work - Various bending dies included - Universally applicable for gas, boiler, and water pipes - Fast work thanks to rapid feed - With a tripod stand for safe work - Also ideal for copper and coated pipes - Bends up to 90° can be created Lsdpfx Ajxaac Njbyoru Features: - Bending dies: ½" - ¾" - 1" - 1 ¼" - 1 ½" - 2"

Condition: used, Year of construction: 2019, Overview    This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end.  The equipment is still installed and connected and can be viewed in person at any time.   Lredpfexgfr Njx Abyeu Technical details  - Capacity: max. 1,500 bph (1,000 bph were actually run)  - Bottled product: Beer   - Included formats: 0.33l longneck, 0.5l NRW  - Closure: Crown cap  Scope of delivery  - Bottle washer | SEN | 1989 (overhauled and installed in 2020)  - Isobaric filler block | Shandong Yuesheng | 2019   - Rinsing positions: 14   - Filling positions: 12   - Capping positions: 5   - With pre-evacuation   - Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW  - Dry tunnel | Shandong Yuesheng | 2019  - Labeler incl. laser printer   - Collecting table  

Condition: new, mileage: 1 km, power: 235 kW (319.51 HP), first registration: 01/2026, fuel type: diesel, number of seats: 57, gearing type: automatic, emission class: euro6, color: other, brakes: retarder, total length: 12,100 mm, total height: 3,460 mm, Year of construction: 2026, Equipment: ABS, air conditioning, cruise control, = Additional Options and Accessories = Other Lrodpoxwxghsfx Abyou - Webasto Other - Air conditioning = Further Information = Damage: none = Company Information = We are an international company based in Belgium, in the Brussels area (+/-20 km). Belgian Bus Sales is your ideal partner for the buying and selling of used buses and has a large parking area that serves as a showroom. We always have a large number of buses of all brands, capacities, models, and in every price range in stock. We can find the right tourist, school, or regular service bus for you, tailored to your needs or your budget. All information is provided without guarantee. Errors, prior sale, and typos excepted. Opening hours for viewing the used buses: Mon-Fri: 08:30 - 12:00, 12:30 - 17:00. (Mowimy po Polsku Agata) We speak your language: Dutch, French, English, Spanish, Portuguese, Italian, Russian, Polish, and more.

Condition: used, Year of construction: 2005, cutting diameter 230 mm cutting speed 35 - 70 m/min cutting width 260 x 200 mm saw band length 2720 x 27 x 0,9 mm Lodpjy N D Nbefx Abysru total power requirement 1,1 kW weight of the machine ca. 0,68 t dimensions of the machine ca. 1,8 x 1,8 x 1,6 m

Condition: used, mileage: 58,515 km, power: 96 kW (130.52 HP), first registration: 03/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,986 mm, total width: 2,059 mm, total height: 2,547 mm, loading space length: 3,350 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and interim sale excepted! Internal number: 1171. PU05544 ----EQUIPMENT - Double rear wing doors 256°, without windows - Speed limiter 130 km/h - LED lighting in cargo area - Cargo area floor – wood - SVO: Express Line Package - Side wall panels up to roof height - 6-speed gearbox - ABS, EBD, and DRIVER ASSISTANCE - Driver's airbag - Exterior mirrors electrically adjustable and heated - Battery: Extended battery life - On-board computer - Roof, medium height - Double rear wing doors/180° (without windows) - Tachometer - Third brake light - Electrically operated front windows - Electronic parking brake - Ford Easy Fuel Lrsdpfx Aboz Edvzeyju - FordPass Connect - Halogen headlights with daytime running lights - Lockable glove compartment - Interior lighting with delayed switch-off - Automatic climate control - 70 l fuel tank - Paint: Solid color paintwork - Cargo compartment lighting - Emergency call assistant - Package: Technology Package 2 - Particle filter: Diesel particulate filter - Radio: 12" multi-function display & Ford SYNC 4 - Tire pressure monitoring system - Wheels: Full wheel trims - Wheels: Tire repair kit - Wheels: Steel 6.5 J x 16 with 235/65R16 - Windshield wipers with rain sensor - Sliding door: sliding door, right - Rear mud flaps - Side protection strips - Power steering - Seatbelts - Seats: Seat Package 18A - Start-stop system - Partition wall (plastic) at B-pillar height - Rear entry step - Air recirculation system - Lashing eyes - Immobiliser - Heat insulating, lightly tinted glazing - Central locking with remote control - Overhead storage compartment at the front ... and much more. ----The vehicle is in unprepared/untouched condition! Nationwide delivery possible for an additional charge. Errors and interim sale excepted. We are happy to consider your vehicle for trade-in. Financing / leasing possible even with no down payment! Do you have any questions? We are happy to advise you!

Condition: new, Year of construction: 2025, For customers from: Lithuania, Latvia, Estonia. Equipment for straightening, longitudinal cutting, and shearing rolled metal is an integral attribute of companies working with sheet metal. The FORSTNER company, which has long-term experience in the production of rolled metal processing machines, currently offers the market not only conventional metal shearing machines, but also equipment that performs straightening, longitudinal cutting, and shearing functions. The shearing function is performed using disk or guillotine shears. Depending on your production goals and the tasks the equipment must perform, they can be divided into four groups: 1. shearing machines; 2. longitudinal cutting and shearing machines; 3. straightening and shearing machines; 4. straightening, longitudinal cutting, and shearing machines. The straightening and longitudinal cutting functions of certain models of longitudinal cutting machines can be automated, which allows you to quickly and conveniently change the parameters when starting to work with another material. Forstner EASY series equipment is a machine that cuts a sheet of metal of a set length with the help of a guillotine or circular shears. EASY CUT machines are equipped with circular shears that can cut steel up to 1.0 mm thick. If you need a machine that can cut thicker metal, then it is recommended to choose the EASY PRO model with a guillotine. The working width of the machines can be 1250 mm or 1500 mm. Forstner STRAIGHT. These machines, by pulling a set length of a sheet of metal, straighten it and cut it. Depending on the type of cross-cutting knife and the diameter of the straightening rollers, the thickness of the processed metal varies from 1 mm to 2 mm. STRAIGHT and POWERSTRAIGHT also differ in the adjustment of the straightening rollers: mechanical or automatic. Integrated automatic control saves time in the long term, because changing the operating parameters of the machine is enough to press one button. Automatic control is a great choice when working with many different materials. Lredowd E N Espfx Abyou The Forstner SLIT series is a reliable assistant when cutting rolled metal. The SLIT CUT and SLIT PRO models not only cut the metal, but also cut it lengthwise into strips of the selected width. As standard, these models are equipped with 5 longitudinal cutting knives (the maximum number of knives is 7). The main difference between the SLIT CUT and SLIT PRO models is the type of cutting knife - a circular shear or a guillotine. The Forstner COMPACT series is a device that pulls the required length of material, flattens it, cuts it into strips of the desired width and cuts sheets of a set length. The main difference between the models is the type of knife used for cutting: a circular shear or a guillotine. The flattening rollers and longitudinal cutting knives are mechanically adjusted. POWER COMPACT is a powerful equipment for flattening, longitudinal cutting and shearing rolled metal. These two models differ in working width and cross-cutting metal thickness. NuSLIT machine models are fully automated equipment. If you are looking for an automatically controlled machine that performs longitudinal cutting and cutting functions, you should choose the nuSLIT PRO or nuSLIT PROCUT models. The difference between these two models is the type of cutting knife: guillotine or segmented disc shears. NuSLIT STRAIGHT PRO and nuSLIT STRAIGHT PROCUT, in addition to the above functions, also smooth the metal sheet.

Condition: excellent (used), Year of construction: 2022, For sale: Romer powder coating line. Equipment manufactured in 2022, lightly used. It was used for coating armored doors. The powder coating line consists of: 1. Oven (doors on both sides, 5 coating tracks) Ledpfxsyzw Hwo Abyoru Model: Romer SW Internal dimensions: 3000 x 1500 x 2200 mm The oven does not have a heating burner, it was previously used with a gas burner. A gas or electric burner can be installed if required. 2. Romer powder coating booth extraction wall Model: Romer KPO-3ZN 3. Conveyor system Overall dimensions: length 5900 mm x width 14000 mm, 2 trolleys with 5 tracks each. 4. Crossbeams with wheels (20 pcs.) Currently, the line is dismantled and ready for transport.

Condition: excellent (used), Complete production line for sale for manufacturing round metal rainwater drainage systems. Production starts from a sheet metal coil, then forms, stamps, and packages the products. All machines are in very good condition. The equipment is fully assembled and intended for mass production of: - Gutters - Gutter ends - Connectors Lsdpjy I Tq Sjfx Abysru - Corners - Brackets - Downpipe outlets - Elbows - Downpipes - Branch connectors (Tees) - Packaging If you are interested in the offered equipment, have any questions, or would like to receive more detailed information, please do not hesitate to contact us. We will gladly provide the full equipment list, technical specifications, additional photos, or arrange an inspection of the production line. All equipment is connected and can be inspected in operation to see the full production process.

Condition: like new (used), Year of construction: 2022, As-new condition (only 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Unit: - For the application of oils, etc. - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - Membrane pump with max. capacity of 18 l/min - Frequency inverter for variable speed of application roller - Frequency inverter for variable speed of counter-roller - Conveyor belt speed adjustable: 3 to 14 m/min - Stainless steel recovery trays Pad Group + Brush Group: - For spreading and removing excess oils - Touchscreen control - Manual height adjustment - Conveyor belt speed adjustable: 3 to 14 m/min - Max. working width: 300 mm - Max. workpiece height: 50 mm - Pad diameter: 300 mm - Quick-change system for pads - Brush dimensions (L x D): 300 x 160 mm - Quick-change system for brushes UV / LED Unit: - Touchscreen control - Manual height adjustment - Max. working width: 300 mm - Max. workpiece height: 50 mm - UV-LED power: 12 Watt/cm² - Incl. ventilation fan - Conveyor belt made of Kevlar fabric Ljdpfx Abjx Ah A Aoyeru - Conveyor belt speed adjustable: 3 to 14 m/min Outfeed Conveyor Belt: - Length: approx. 2,500 mm - Max. working width: 300 mm - Conveyor belt speed adjustable: 3 to 14 m/min Note for used machinery: • Technical details and prior sale subject to change and errors. • Stated prices are ex works - free loading! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty claims. Buyers are free to inspect the machine at its location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Condition: used, Year of construction: 1995, operating hours: 26,000 h, machine/vehicle number: LC668, Used Tetra Pak TBA 8 V100 1000ml slim, helicap 23Technical Specifications & Performance DataThis second hand Tetra Pak complete aseptic carton filling line is configured for dairy production in slim 1.0L Brik carton packages. The core of the line is a Tetra Pak TBA 8 V100 filling machine, manufactured approximately in 1995 and showing approximately 26,000 working hours. A total refurbishment was completed in 2026, followed by a test run and inspection.Main filling machine: Tetra Pak TBA 8 V100Package format: Slim 1.0L aseptic carton packageSpeed: 6.000 TP/hProduct application: Dairy productionYear of manufacture: approximately 1995Working hours: approximately 26,000 hRefurbishment: total refurbishment in 2026Advanced Automation & Control SystemsThe line is supplied as an integrated industrial packaging solution comprising filling, cap application, conveyor handling and wrap-around tray packing equipment. The Tetra Pak TCAP 45/47 cap applicator has been modified for HeliCap 23 and is designed to handle screw caps with pre-punched paper packaging material. The standard-layout conveyor installation provides product transfer between the listed process stages.Machines of this type are intended to operate as coordinated packaging machinery, enabling continuous movement of filled carton packs from the filler through closure application and secondary packaging. Final operational setup should account for the selected carton material, cap components, product process interface and required line controls.Production Line Integration CapabilitiesThis used bottling line is arranged for aseptic Brik carton handling rather than conventional PET or glass bottle processing. It combines a Tetra Pak filling machine with a dedicated screw-cap applicator, approximately 30 meters of conveyors and a tray packer for wrap-around trays. The equipment is suited to integration within a dairy beverage production and industrial packaging environment.Machine typeManufacturer / modelYearFilling MachineTetra Pak TBA 8 V1002001Capping MachineTetra Pak TCAP 45/47ConveyorsConveyorsWrap Around PackerTetra Pak TCBP 70The line can form a practical filling and end-of-line packaging section where cartons are filled, closed, conveyed and packed into wrap-around trays. Upstream dairy processing, hygienic product supply and downstream pallet handling can be matched to the requir... Ljdpozwu Unefx Abyeru

Condition: used, Year of construction: 1999, machine/vehicle number: LC693, Used KRONES Sensometic VP-G filling line 12000 BPH for fruit syrup - Year 1999Technical Specifications & Performance DataThis KRONES complete bottling line is configured for filling raspberry syrup, various fruit syrups and special citrus vinegar at a filling temperature of 25 °C. Built in 1999, the line handles glass bottles and PET bottles in three documented formats, combining rinsing, filling, dual capping and cold-glue labeling within an integrated industrial packaging process.Maximum production speed: 12,000 bph with 0.7L glass bottlesProduction speed: 10,000 bph with 1.0L glass bottlesProduction speed: 6,000 bph with 1.5L PET bottlesCompatible formats: 0.7L glass, 1.0L glass and 1.5L PET bottlesElectrical supply: 240/400 V, 50 HzLine direction: left to rightAdvanced Automation & Control SystemsThe bottling equipment is controlled by a Siemens S5 115 U PLC. Electronic valve control is fitted to the three-channel KRONES Variojet rinser, while motorized height adjustment is provided on the filler upper section and on both capping stations. The labeling machine incorporates a horizontal, single-line laser dater for in-line coding.The Prontomatic labeling machine has a full protective enclosure and a lift-up monoblock design, supporting protected operation and access during routine line activities.Production Line Integration CapabilitiesDesigned as a complete used bottling line, this KRONES configuration integrates bottle rinsing, filling, screw capping, snap-on capping and multi-position labeling. Standard feeding, right-angle labeler infeed and transfer-screw container handling support continuous bottle movement through the labeling section. The line is suitable for industrial packaging applications involving syrup and vinegar products in glass and PET containers.Machine typeManufacturer / modelYearRinsing MachineKRONES Variojet 2.520-070-1131999Filling MachineKRONES Sensometic VP-G 050-113/SV 10/SOV 10-S1999Capping MachineAlcoa PP 10 / 360Capping MachineAlcoa K 10 / 360Labeling MachineKRONES Prontomatic 720-12-6-4-1801999PrinterLaser daterMachine Condition & Maintenance HistoryThe line is availa... Lsdpfx Ao Adtqxobyoru

Condition: used, Year of construction: 2008, operating hours: 2,467 h, machine/vehicle number: LC690, Used AMER filling line for still water PET, 5000 BPH, 2 blowersTechnical Specifications & Performance DataThis used bottling line is configured for still water in PET bottles and combines bottle production, conveying, rinsing, filling, capping, labeling and secondary packaging. The line includes two SMF COMBI 400 automatic PET bottle blow molding machines, an AMER rinsing-filling-capping monoblock, a SACMI LABELLING OPERA 200 RF labeling machine and an AMER shrink wrapper.Filling capacity: 4,000–5,000 bph for bottles with 30/25 mm necks.Blowing capacity: up to 4,000 bph on 1.5L bottles through two SMF COMBI 400 blowers.Labeling capacity: 12,000 bph.Shrink-wrapping capacity: 300 packs/h.Bottle range: 0.25L to 2.5L for the blow molding section.Available mold formats: 0.33L, 0.6L, 1.5L and 5.0L, depending on the machine section.Filling monoblock configuration: 16/18/6.Required installed power: 120 kW.Required hall surface: approximately 500 m².Advanced Automation & Control SystemsThe PET bottle blow molding section uses infrared preform heating with 8 segments, 14 lamps and 550 mm heating elements. The SMF COMBI 400 machines operate with a 400 V, 3-phase, 50 Hz supply and have an installed power of 56 kW per machine. The labeling machine operates at 400 V, 50 Hz and is rated at 28 kW and 47 A.The AMER filling monoblock integrates rinsing, filling and capping in a compact process block. It is equipped with a HEPA filter and an integrated CIP aggregate with disinfection, supporting hygienic beverage production and efficient internal cleaning procedures.Production Line Integration CapabilitiesThis complete bottling line is designed as an integrated PET packaging solution for still water production. Preforms are handled by the SMF hopper and supplied to the blow molding machines, while air conveying transfers formed PET bottles toward the filling section. After rinsing, filling and capping, bottles are labeled with OPP foil and transferred to the shrink wrapper for pack formation.Machine typeManufacturer / modelYearBlow Molding MachineSMF Maschinenfabrik GmbH / COMBI 4002009ChillerSMF Maschinenfabrik GmbH / HT-6A2008Filling MonoblockAMER / BLOCK2008Labeling MachineSACMI LABELLING / OPERA 200 RF2008Shrink Wrapper Lrodpfx Abe Adtttoysu

Condition: excellent (used), Year of construction: 2020, Pallmann PS-H 600/900 plastic shredding line. Mill chamber dimensions 600x900mm, power 75/90kW. Very good condition. Lodpozxup Iefx Abyoru Line components: 1. Conveyor, Keiper product Drive power 1.1 kW Belt working width 600 mm Center distance 5500 mm 2. Surface metal detector, type FS 650, manufacturer Sesotec Detection width 640 mm Detection sensitivity for FE ball at detection height of 20 mm: 2.5 mm Detection sensitivity for FE nut at detection height of 100 mm: M6 3. Cutting mill, PS-H 600x900 F3/SD5, PALLMANN product 4. Volumetric feeder, type RVR 10, WAM product Drive power 0.75 kW 5. Screw conveyor, type TME219/0440, WAM product Drive power 2.2 kW 6. Sifter, type R25, Waltinger manufacturer Drive power 1.5 kW 7. Fan, type MXE063-008030-00, Reitz product Flow rate: 80 m3/min Total pressure increase 630 daPa Drive power 15 kW Rotational speed 3,000 rpm 8. Filter, type PA 7x8-2500, Tama product Residual dust content: < 20 mg/m3 Filter area 54 m2 Exhaust air 4800 m3/h 9. Filter, type PA 6x5-2000 CCD, Tama product Residual dust content: < 20 mg/m3 Filter area 23 m2 Exhaust air 2100 m3/h 10. Fan, type MXE031-003530-00, Reitz product Flow rate: 35 m3/min Total pressure increase 315 daPa Drive power 3 kW Rotational speed 3,000 rpm 11. Metal separator, type Rapid Vario FS 100, Sesotec product Removal duration (adjustable) 0.5-29 s Compressed air connection (hose) 6/8 mm Working pressure 5-8 bar 12. Screw conveyor, type TMS219/0540, WAM product Drive power 2.2 kW

Condition: used, Fully automatic scarf jointing line for the following dimensions: thickness: approx. 24 – 100 mm, width: approx. 80 – 240 mm, scarf joint lengths: 400 – 1,500 mm, finished length: 2.50 m – 13.50 m, infinitely adjustable. Consisting of the following plant components: - SMB vacuum stacking system, longitudinal, with 2 lifting tables and 2 package conveyor lines, year of manufacture 2013, package dimensions max. 1.20 x 1.20 x 6.00 m, 4 suction pads, Sicko system, singulation and infeed into a conveyor line for scanner feeding, board turner, diverter for too moist, too dry, diverter for B-quality, marking station or automatic operation - Bidac end-face scanner for scarf joint detection, year of manufacture 2013 - Brookhuis moisture measurement FMI 5, year of manufacture 2019 - Microtec scanner Goldeneye 502, year of manufacture 2012 with X-ray, 4 color cameras, and new optimization software - Dimter Opticut 350-2, year of manufacture 2003 with paddle ejector, year of manufacture 2009, and associated sorting belts and pneumatic ejector for 2 additional qualities - NKT packaging - NKT scarf jointing system with rotary table, special pack AH 1050, year of manufacture 2005, consisting of: milling machine, tipping station, infeed section, length 5.0 m, cycle press, length 6.00 m, crosscut saw - SMB stacking machine, year of manufacture 1998, length 2.50 – 13.50 m, divisible into 2 units (e.g. 2 x 5.0 m), 8 stacking arms, 8 stacking tongues, manually adjustable stop, infinitely adjustable, electro/hydraulically controlled, package width: max. 1200 mm, package height: max. 600 mm, hydraulic package ejector. Lrjdpfxjvvi Tye Abyju Location: Customer

Condition: used, MEP Syntax Line 25 Automatic Rebar Processing Center, Used Machine Manufacturer MEP S.p.A. (Made in Italy) Model Syntax Line 25 Machine Functions Automatic straightening from coil Hydraulic cutting CNC-controlled bi-directional bending Processing Capacity (Rebar from Coil) Single-wire operation: Ø8 mm to Ø25 mm Double-wire operation: Simultaneous processing of 2 bars from Ø8 mm to Ø16 mm Material Storage Storage capacity: Up to 14 m³ Manual loading Collection tray: 12 × 2.5 m Ledpfezg Uv Dsx Abyeru Overall Dimensions Width: 17,400 mm Depth: 2,400 mm Height: 1,600 mm Condition The built-in monitor is not operational. The machine is equipped with a video output, allowing an external monitor to be connected for operation.

Condition: refurbished (used), Year of construction: 2005, COSTA LEVIGATRICI C C 1350 , 1 bottom roller + 1 top roller Lroder I Atdspfx Abyou

Condition: used, Year of construction: 2017, machine/vehicle number: LC677, Used Wild GoosePak canning line - Year 2017Technical Specifications & Performance DataThis used bottling line is a 2017 Wild Goose 4-head canning line configured for industrial packaging and beverage production in standard LOE aluminum cans. The line is identified as WGC-250 and includes Wild Goose M-250 equipment together with a Wild Goose Paralleltrain unit. It is configured for three established can formats, allowing operators to run multiple retail pack sizes within the same second hand canning system.Manufacturer: Wild GooseLine model: WGC-250Year: 2017Configuration: 4-head canning lineCan formats: 0.355L, 0.473L and 0.568L standard LOE cansElectrical supply: 110 VAdvanced Automation & Control SystemsThe line is described as functional and is arranged as an integrated can handling and filling solution. The supplied information does not identify a PLC type, while the 110 V electrical requirement should be considered during commissioning and site electrical planning. The equipment is supported by available manuals and spare parts, helping maintenance teams prepare routine service procedures and operational changeovers.Safety guards are not included. A buyer should evaluate the safeguarding arrangement, operator access points, interlocks and emergency-stop integration as part of installation planning and before production use.Production Line Integration CapabilitiesThis Wild Goose canning line combines depalletizing, can turning or rinsing and 4-head canning functions in a compact process arrangement. Empty aluminum cans are supplied from the depalletizer, pass through the twist rinser section and continue to the M-250 canning equipment. The configuration is suitable for integration with upstream product preparation and downstream coding, secondary packaging, palletizing and conveying equipment according to the required beverage production layout.Machine type/categoryManufacturer/modelYearDepalletizerWild Goose2017Can Twist ConveyorWild Goose Paralleltrain2017Filling MonoblockWild Goose M-2502017Machine Condition & Maintenance HistoryThe equipment is stated to be functional, supporting its use as a used bottling line for buyers seeking a ready-for-operation canning solution. Manuals are available and spare parts are available. Maintenance records are not supplied, so standard pre-installation inspection, cleaning, functional testing and service planning remain important steps for a smooth handover into production.Operational Performance & Versat... Lodsz E Df Aepfx Abyoru

Condition: used, Year of construction: 2007, Year: 2007 Condition: good, functional Configuration: DUPLO DBM-120 – Automatic Booklet Making Line - DUPLO DC-10/60 – 10-station collator. - DUPLO LUL-HM – Left-hand lifting and connecting module. - DUPLO DC-12JR – Vibrating jogger for paper alignment. - DUPLO DBM-120 – Automatic booklet maker for wire stitching and folding. Technical Specifications: - Maximum production speed - 2,400 booklets/hour - Maximum sheet size - 320 × 450 mm - Minimum sheet size - 200 × 200 mm - Minimum sheet size with accessories - 148 × 210 mm - Maximum booklet size - 320 × 225 mm - Maximum capacity - 25 sheets of 80 g/m² - Number of stitching heads - 2 - Stitching methods - Saddle stitching, side stitching and corner stitching - Folding without stitching - Yes - Program memory - 13 programs - Dimensions - 1,300 × 700 × 550 mm Functions: Lrsdpfxez R Uqce Abyju - Automatic collating of individual sheets into sets. - Jogging, alignment and transportation of collated sets. - Wire stitching of booklets along the spine. - Folding of booklets to the final format. - Automated production of booklets, catalogues, manuals and other printed materials.

Condition: used, Year of construction: 1999, Overview  Lsdsyx I Awspfx Abysru This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  - Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) - Formats: 250 ml – 1000 ml - Application: Hot-fill and cold-fill beverage production - Container types: Glass bottles and PET bottles (hot-fill) - Filling temperature: 10°C – 104°C - CO₂ capability: Yes - Closures: - Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off - PET: 38 mm 3-start hot-fill closure - Labelling: Cold glue paper labels (optional sleeve labelling available) - Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  - Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine - Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system - Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 - Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding - Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones - Bottle dryer | Europool | - | 2007 | High-speed air dryer - Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 - Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt - Conveyors | KHS / Krones | - | - | Complete conveying system - Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial - Pallet labeller | Logopack | - | - | Pallet labelling system - Reverse osmosis system | MWT | - | - | Capacity 800 l/h

Condition: used, Year of construction: 2013, Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle formats: Our service: send us your requirements and we will check the possibility of processing your bottle format. Cap formats: Screw caps, press-on caps, spray pumps with riser pipes   Our service: send us your requirements and we will check the possibility of processing your cap format. Capacity: Unscrambler: max. 6.000/h Filling machine: max. 5.000/h Rotary capping: max. 5.000/h The output depends on the container and cap geometries and the filling product.    1. Bottle Unscrambler BREITNER BFC 8002 - Operation: continuous from supply bin - Bin volume / drum Ø: 1.4 m³ / 1500 mm - Working height: 900 mm, left → right - Material / Housing: AISI 304 stainless steel + plexiglass - Safety: door switches, overload protection - Power / Air: 3 × 400 V, 4 kW / 400 Nl/min at 6 bar - Container size: round Ø ≤100 mm × 250 mm, larger on request - Feature: blow-cleaning station with ionized air and dust extraction 2. Filling Machine BREITNER MDL 2086 - Filling: mass flow, 8 stations (expandable to 12) - Filling range: 100 – 2000 ml/g, up to 5,000 bottles/h - Working height / direction: 900 mm, left → right - Product-contact parts: AISI 316, food-grade hoses, VITON seals - Tank / Pressure: 100 L, 5 bar - Power / Air: 3 × 400 V, 4 kW / 150 Nl/min at 6 bar - Container size: H 50–350 mm, Ø/width 50–80 mm, various shapes - CIP cleaning: 8 cleaning cups, automatic spray & drain, multi-step program - Extras: laminar flow, remote maintenance, additional filling valves, swiveling tray, heating system 3. Rotary Capping Machine BREITNER SRT 5044 - Operation: continuous rotary, 4 capping stations - Output: up to 5,000 containers/h Lredpjxqzmwefx Abyju - Container size: Ø ≤100 mm, H ≤300 mm - Working height / direction: 900 mm, left → right - Drive / Tools: servo motor, 0,3-3,5 Nm; BREITNER capping tools - Power / Air: 3 × 400 V, 4 kW / 100 Nl/min at 6 bar - Control: B&R controller, touchscreen, 200 format memories, password-protected - Safety & inspection: door switches, overload, “No bottle – no closure,” optical cap check, reject system - Extras: servo vertical movement, torque monitoring, fan-based cap feed, vibratory sorter VIB 8001, cap supply SFB 8001

Condition: used, KRONES ROUND GLASS LINE 500/600BPM 700ml, 750ml, 1 Litre STORK MINIATURE LINE 200 BPM 50ml Glass & PET BERTOLASO LINE 200BPM 200ml, 300ml, 375ml, 500ml Glass & PET Lrjdpfxozrf A Ee Abysu STORK GLASS LINE 200BPM 350ml, 700ml, 750ml, 1.14 Litre

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Tool clamp: ISO 40 Tool holders: 2x 5 pockets Lredszytmzepfx Abyju The industrial PC and the business software were updated in April 2025 (retrofit). The installation has been serviced annually.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 0700922, input voltage: 400 V, type of input current: three-phase, KÖNIG ECO TWIN 800 WITH CLASSIC REX T6/5S SK58 – 2018 Complete König line for the automatic production of rolls and bakery products. Year: 2018 The line consists of a König Classic Rex T6/5S dividing-rounding machine combined with an Eco Twin 800 pre-fermentation and shaping line. Features: * Manufacturer: KönIG * Model: Eco Twin 800 * Year: 2018 * Dividing head: Classic Rex T6/5S * Piston size: SK58 * Weight range: 35 to 85 g * Operation in 5 or 6 rows * Nominal width: 800 mm * Eco Twin capacity: * Up to 5,040 pieces/hour in 6 rows * Up to 4,200 pieces/hour in 5 rows * Maximum capacity of the Classic Rex head: * Up to 9,000 pieces/hour in 6 rows * Up to 7,500 pieces/hour in 5 rows * Integrated pre-fermentation * Siemens Simatic control * Integrated elongation roller * Automatic product depositing onto baking sheets * Several interchangeable stamping tools available * Quick tool changes Lrjdpfx Abezyv Nrsyou * Cutting/stamping station depending on configuration Products that can be produced: The line allows for the production of a wide variety of rolls, including: * Round rolls * Stamped rolls * Kaiser rolls * Cut rolls * Elongated rolls * Elongated and cut rolls * Elongated and stamped/pressed rolls * Double rolls * Various special shapes depending on the stamping tool used Several stamping tools are available with the line. The Eco Twin is a compact and versatile line that allows for the production of a wide variety of products with quick changeover times. Machine can be viewed and tested by appointment. Photos, videos, and additional technical information available upon request. Photos taken before cleaning.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 32.3.0218, input voltage: 400 V, type of input current: three-phase, KÖNIG ARTISAN SFC – 2012 Compact König line for the production of rustic rolls, ciabattas, and various products cut from a dough sheet. Year: 2012 Key features * Manufacturer: KÖNIG * Model: Artisan SFC * Year: 2012 * Capacity: up to 300 kg of dough/hour * Dough sheet width: up to 170 mm * Belt speed: up to 1.5 m/min * Wide feed conveyor for dough loading * Flour dusting system * Dough sheet calibration rollers * Longitudinal cutting system * Transverse cutting guillotine * Stamping/forming station * Interchangeable cutting rollers and stamping tools * Adjustment system allowing the production of many different formats Products that can be produced Depending on the tools installed: Ledpszyv Nxofx Abyoru * Ciabattas * Square rolls * Rectangular rolls * Triangular rolls * Rustic products * Stamped products * Various special shapes Several cutting and stamping tools are available with the machine. The Artisan SFC works directly from a dough sheet and allows for gentle processing, particularly suitable for soft doughs and rustic products. Machine can be viewed and tested by appointment. Photos, videos, and additional information available upon request.