Used Pillow-Pack Machine for sale (65,437)

Condition: ready for operation (used), Year of construction: 2006, An automatic vacuum packaging machine Saccardo Arturo Figli with double chamber design is available. Sealing bars: parallel, number of bars: 2, bar length: 1300mm, max. lid internal height: 360mm, min. operating pressure: 5mbar, vacuum capacity: 2x540m³/h, pump type: PVR. Machine dimensions X/Y/Z: approx. 2700mm/1100mm/1300mm, weight: approx. 1000kg. On-site inspection is possible. Blsdpeygmbmofx Akaeg

Year of construction: 1995, condition: ready for operation (used), An ACG Nowo (ACG Kinna Automatic) pillow machine for processing cotton and for filling in textiles for pillow production is available. Documentation available. On-site inspection is possible. Bledpowwvvpefx Akajg

Condition: ready for operation (used), Year of construction: 2013, Application: Removal of 12 jars from the conveyor belt in boxes of 12 with the aid of a built-in robot. On-site inspection is possible. Bodsrx T Dkopfx Akaolg

Condition: used, Year of construction: 2021, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, air pressure: 6 bar, The principle of operation off the model PC40 machine is based on the automatic distribution, uninterrupted transfer and rotation of the parts which are visually inspected by two operators. The machine works according to the principle of uninterrupted kinematics, with the following advantage: Blsdpfxoyx Sayo Akaeg 1. Uninterrupted transfer and rotation of the parts 2. Very limited wear of mechanical parts as the motion is continuous and without jerks. The products are automatically transferred one by one onto a driving chain fitted with dogs and an inclined place. The products rotate past two operators, sitting side by side. These operators check the products and remove manually those which they consider as defective. The other products are discharged into a box at the end of the chain. Feeding is ensured by automatic systems, Model AS-PC Workstation components: 2 machine workstations, A driving chain fitted with dogs ensures uninterrupted transfer of the products in front of the two operators. Workstation additional equipment: Normal discharge system for defective products after each visual inspection station. An emergency stop safety device. Four (4) mirrors for inspection of the products from particular angles, at the front and at the rear of the chain fitted with dogs

Condition: used, Automatic packing machine Manufacturer: MAIR Model: .90.D.6.SL Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Model: SKE_M_TS-31J-WILT_4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Length: 4 - 12 m Blsdeyma Adspfx Akajg INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/6/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 4 – 12 m Square bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 2 Tn

Condition: used, MAIR Automatic packaging machine MPS RH150/D/4/SL & SIGNODE Automatic strapping unit M400 1. MAIR PACKAGING MACHINE, model MPS RH150/D/4/SL Model MPS RH150/D/4/SL Pat. automatically packs round tubes in hexagonal bundles. The Machine allows the strapping operation to be carried out automatically in a fix position, with the bundle moving sideways and stopping automatically at the programmed strapping positions. It is composed of: - Four tube lift chain conveyors with carrier teeth and intermittently driven for the lifting of one tube at a time, coming from the threading machine, to the aligning area; - One driven rollway to align the tube against an adjustable end-stop, before the row formation; - Two storage areas for the tube row; necessary during the bundle evacuation cycle; - One sturdy structure in welded structural steel, forming a bridge; - Tube row handling system which picks up a row of tubes at a time from the second row storage and places it down onto the bundle forming brackets. - Handling is performed by a series of electromagnets which perform a rotary movement during the row transfer cycle; - Four driven vertical brackets for bundle formation and holding. They are provided of adjustable blades according to the required bundle size and shape and they will be lowered in order to allow the bundle laying down on the evacuation trolley. - Driven evacuation trolley, sliding on rails fixed to the floor and equipped with lower driven rollers and pairs of retaining vertical loose rolls. - Driven flat conveyor to transport the bundle after the strapping area. - Driven storage chains suitable to approach bundles at the selected quantity. - Drainage station for bundle lifting, to allow the coolant outlet from tubes; it is equipped with two hydraulic devices driven by a hydraulic power pack. - Control switch cabinet. 2. SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; - 450 kg. jumbo coil dispenser with electrical unwinding; - Switchboard. 3. WEIGHING STATION Model KG8/DY The weighing station weighs tube bundles by means of load cells. Bundles are transferred by the driven storage chains to the weighing position. The Weighing Station is located under the pneumatic lifting devices which will lift the bundle in order to allow the weighing operation. It is composed of: Blsdoymahyspfx Akaog - Bottom frame to be fixed to the floor, complete with four supports, linkages and loading cells. - Top holding frame, able to receive the bundle lifting devices. - Compact weight transmitter. 4. MANAGEMENT INFORMATION SYSTEM Model DATAPACK 3/T The Datapack Management System software allows the operator : - To control and monitor tube production in real time. - To set the a new bundle configuration with its strap application positions. - To store the various bundle configurations and strap application positions into an archive where they can be easily retrieved. - To create batches of different bundle configurations and then load them into one production sequence. - Monitor all alarm and fault messages (trouble...

Condition: good (used), Year of construction: 2019, functionality: fully functional, The Kolbus AB300 is a fully automatic, modular machine for the production of corrugated cardboard boxes, capable of manufacturing a variety of box styles (such as 0201, tray, wrap, and pallet boxes). Key specifications include a maximum speed of up to 100 m/min, fully automatic setup via touchscreen, a maximum blank width of 2590 mm (102 inches) with unlimited length, and the capability to produce over 100 different box styles. The machine offers high flexibility, allowing for rapid changeovers between different sizes and styles. Technical Specifications - Maximum speed: up to 100 m/min - Widths: from 100 mm to 2590 mm (102 inches) - Length: Unlimited - Box types: Over 100 different styles, including 0201, wraps, pallet boxes, and partitions - Control: Fully automatic setup via touchscreen - Energy efficiency: Up to 75% energy savings compared to conventional machines - Material: Suitable for all types of corrugated board Blodpfxoxpga To Akaog

Year of construction: 1998, condition: used, DESCRIPTION : STRAPPING MACHINE BRAND MOSCA TYPE RO-M-P2 YEAR 1997 Max. boxes: 400 x 500 mm Electrical power:220 VOLT 0.5 Kw Bjdpfx Aksfwmwxoaslg DIMENSIONS: 2300 x 1100 x 1800 mm

Condition: like new (used), Year of construction: 2024, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: QYKM-1400x2900, total height: 3,200 mm, total width: 4,300 mm, total length: 7,600 mm, overall weight: 2,500 kg, Equipment: documentation/manual, We are selling our as-new pizza box machine due to business closure. The machine was ordered from China. It is nearly new and operates flawlessly. All components are fully functional. Coating can be applied at any time. Bjdpfsxvy Hmsx Akaolg

Condition: good (used), Year of construction: 2013, VIKING MASEK ST 200 Stickpacker This 2-lane machine has a maximum output of 65 sticks/min and is designed for forming, filling, and sealing stick packs with powder. Bag width: 17 - 40 mm Bag length: 50 - 200 mm Fill volume: 0.2 - 100 ml Max. film roll diameter: 400 mm Max. film width: 400 mm Manufacturer: Viking Masek Blodjxvzanopfx Akajg Year of manufacture: 2013 Space requirement: 120 x 250 x 260 cm

Condition: used, Technical details: table height: 800 mm table rotating: 360 ° table: 800 mm height over floor: 940 mm Bjdou Nu E Sepfx Akajlg temperature: max. 450 °C electrics - voltage/frequency: 220/50 V/Hz total power requirement: 1,1 kW space requirements of the machine approx.: T:0,8xB:1,0xH:1,6 m With this machine can be packed parts respectively shrink-wrapped. There is a table with 4 stations on the machine. Can be purchased together with vaccum welding machine. i.D. *

Condition: refurbished (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: VA050-4GXXX2/FXXWXXXXXXXX, We hereby offer a Nordson gear pump system from 2012. The system will be completely overhauled by us prior to delivery, including coating of the tank and surcharge tank. The system is fully operational. The tank capacity is approximately 50 kg. One gear pump is installed. If you have any questions, please feel free to contact us. Bedpfx Ajwxb Srokajlg

Condition: excellent (used), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, Automatic toilet paper and kitchen towel packing machine We have used it for less than 10 hours. After purchase, it did only a couple of test runs and then was stored in a dry warehouse for later use. It had never been used since. There might be some bends on the machine since it has been moved a couple of times. Specification Power 220V 50Hz Packing: Toilet paper 2/4/6/8/10 rolls per pack with handle, Hand towel 2/4 rolls per pack with handle Packing in film, overwrapping with meld line on the back. It uses opp film, a max roll diameter of 30cm, and a thickness of 0.03 - 0.10 by the specification, no idea about other materials - have not tested any. For setting up and configuration the machine you will have to contact the manufacturer The machine can be seen, powered on, and set to automatic/manual running. User manual is available, have videos from the manufacturer only Bedpfxjuyhf Hj Akaslg

Year of construction: 2004, condition: ready for operation (used), Operational hours counter: ca. 14,000h. Bljdjh Dw Tvopfx Akaog

Year of construction: 2006, condition: ready for operation (used), Controls: SIEMENS SIMATIC OP7, operational hours counter: ca. 1700h. Blodpfx Aein E Taokaeg

Condition: used, Year of construction: 1991, functionality: limited functionality, machine/vehicle number: 1155, type of input current: three-phase, Packaging machine DIENST, model HK-II-N-K-14", year of manufacture 1991 Bodpfx Asxhfgcjkaolg

Condition: ready for operation (used), functionality: fully functional, ABB pick-and-place robot with vacuum pump, control cabinet, Cognex camera, and PickMaster software. Bjdexam Swopfx Akajlg

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: AC, total length: 15,750 mm, total height: 1,720 mm, total width: 4,250 mm, input voltage: 380 V, overall weight: 3,500 kg, compressed air connection: 6 bar, control cabinet length: 50 mm, control cabinet width: 1,000 mm, warranty duration: 12 months, control cabinet height: 1,350 mm, year of last overhaul: 2036, power: 10.5 kW (14.28 HP), product height (max.): 250 mm, product height (min.): 18 mm, product length (max.): 2,500 mm, product length (min.): 200 mm, Revolutionize Your Flatpack Furniture Line: 100% Automated Packaging with EDDA Lotis Manual packaging is often the biggest bottleneck in furniture production—but it doesn't have to be. Introducing the EDDA Lotis, a game-changing solution specifically engineered for the flatpack (RTA) furniture industry. We’ve designed this system to handle the heavy lifting so you can scale your operations without increasing your headcount. Why industry leaders are switching to EDDA Lotis: Zero Operator Required: Transition to a fully autonomous packaging workflow. High-Speed Output: Process up to 4 boxes per minute (240 boxes/hour) with pinpoint accuracy. Flatpack Precision: Perfect for furniture panels, ensuring secure and professional sealing every time. Zero Manual Setup: The system automatically measures and positions itself for varying box sizes on the fly. Smart Taping: Features triple-head taping for wider furniture Blsdpfsy Iggmsx Akasg boxes and optional auto-labeling. Stop slowing down your production line at the final stage. The EDDA Lotis ensures your products are "ready-to-ship" faster, safer, and more efficiently. Efficiency isn't just a goal; it's a competitive advantage.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: AC, total length: 15,100 mm, total height: 2,825 mm, total width: 5,108 mm, input voltage: 380 V, overall weight: 6,750 kg, compressed air connection: 6 bar, control cabinet length: 500 mm, control cabinet width: 1,000 mm, control cabinet height: 1,350 mm, product height (max.): 1,200 mm, product height (min.): 550 mm, product length (max.): 3,000 mm, product length (min.): 1,000 mm, SOFA PACKAGING LINE Safe, Delicate and Accurate Packaging Fully Automatic Packaging Machine Different sizes of sofas,couchs etc. Are you looking for the right solution for packaging products? Let's examine it together. We offer fully automatic packaging that prepares itself according to the dimensions of your products. After placing your sofa on the line, sofa dimensions information is obtained by the system. After the operations carried out at the stations, the packaging process is completed by closing the sofa totally. The stations on the line are programmed for optional use. Do you want to carry out your complete packaging operations Bsdpfsy Icbyex Akaslg in the minimum time and correctly? Here is ARTEMIS…

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: AC, total length: 1,642 mm, total height: 2,055 mm, total width: 3,594 mm, input voltage: 220 V, overall weight: 1,834 kg, compressed air connection: 6 bar, warranty duration: 12 months, working height: 850 mm, Equipment: documentation/manual, INSTANT-PACKING Safe and responsible packaging — just in time. Bedpjy Iby Iofx Akajlg The NEOBOX Series cardboard box cutting machine produces resource-friendly packaging solutions for the future of the wood-processing industry. The NEOBOX produces made-to-measure cardboard boxes fully automatically and just in time. In a dynamic process, raw materials are used responsibly, thereby saving packaging and filling material in significant amounts. With the models of our cardboard box cutting machines, we have the right solution for every customer — from entry-level models up to high-performance machines, from standard use to complex packaging cutting. With the NEOBOX, produce exactly the packaging that you need — in optimal form, with a high volume-utilization factor and the lowest possible unit costs.

Condition: used, Year of construction: 2010, weight of the machine ca. 0,2 t Bljdpjwr Etyjfx Akajg

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: D56L/8403, Offer Number: D56L/8403 Machinetype: packing machine Bedpfsxnyh Iox Akajlg Make: WEIGHPACK Type: Constr. year: 1994 working range: Location: In our warehouse

Condition: new, Year of construction: 2025, Premade pouches packaging/filling and closing machine, rotary operation with 8 working positions. Suitable for flat pouces and doypack style pouches with/without zipper or spout. Easy operation through touch screen and SIEMENS PLC, frequency conversioin for speed adjustment, no-pouch- (or no open pouch) no-filling/seal function. Motorized bag width adjustment, oil free plastic bearings, all product or bag contacting parts are made of stainless steel (SS304). Can be used with all kinds of infeed/dosing modules (optional) to pack granulate like products, liquids, pastes, powdes, etc. Suitable for a wide range of film materials like compound/monolayer PE, PP, paper, etc. (please ask for details). Bag infeed vertically with hopper (for flat bags), optionally: horizontally infeed, especially for zipper or spout bags. Sucking unit to open all kind of bags with thinner film material. Suitable for the following bag dimensions: L(200-450)xW200-300)mm. - Technical specifications: max. speed of the machine in neutral: 30 cycles/minute; power: 380V, 4.0kW; compressed air: 0.6m³, 6bar; machine dimensions: L2500xW1800xH1800mm; weight: 1400kg. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Blodpfx Asv Nlmvokasg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Filling and capping machine for filling liquids and pastes into stand-up pouches (doypacks) with spout. Suitable for premade doypacks with a corner spout or a spout on top. The rotary machine has filling units equipped with two filling heads each for liquid filling and two heads each for positioning and closing the spout lids. Additional equipment: feeding lift for the spout caps, external module for CIP cleaning, air cleaning system for inner area of the machine. Relevant electronic components from Schneider and Omron, PLC and touch screen from SIEMENS, pneumatic components from AIRTAC. - Specifications: Filling range: max. 3000ml; number of filling heads: 6; max. number of machine cycles in neutral: 26 cycles/min; current: 220/380V, 2.5kW; air pressure and consumption: 5-7bar, 0.7m³; machine dimensions LxWxH: 2600x1630x1900mm; weight: 1600kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Bledpfxjv Nlngs Akaog

Year of construction: 2025, condition: new, Horizontal packaging machine for the automatic production, filling and sealing of stand-up pouches (doypacks) with regular and irregular shape, with hanging hole, with zipper. Suitable for small stand-up bags. Integration of various filling systems is possible (auger, weigher, volumetric dosing, liquid and paste dosing units, etc.). Two bags are handled per machine cycle, whereby a higher output will be achieved per minute. 2 dosing units are needed and accordingly 2 charging hopper are mounted. The possibility to upgrade the machine with two additional dosing units and charging hoppers does exist, either to handle two different materials or to split the filling process. The latter can increase the production speed (e.g. relevant/important when processing viscous materials). Main components: PLC, touchscreen user interface (different languages available e.g. English, German etc.), temperature monitor. - Specifications: pouch sizes (min.-max.): L(110-250)xW(90-140)mm; filling capacity: max. 600ml; max. speed of the machine in neutral: 55 cycles/minute (corresponds to max. 110 bags/min); 15.5kW; 24m³/h; machine dimensions: (L)9300x(W)1100x(H)1500mm; weight: 3400kg. All product contacting parts made of stainless steel (SS304). Any dosing unit and/or other modules (such as conveyor etc.) shown on the picture are optional modules to this position and only depicted for demonstration purposes. The machine is suitable for variety of composite films. Eye marks must be present on the film. We gladly verify and confirm on basis of sampling the compatibility of the respective composite film. Bljdpfx Akev Nltpeasg Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.