Used Pickers for sale (202)

Condition: like new (used), Year of construction: 2018, operating hours: 5,557 h, load capacity: 2,000 kg, fuel type: electric, Manufacturer + model: TOYOTA LPE 200 * EX * Pyroban 3D / Zone 22 ID: 24090.5906 Category: Used Forks: 1150 x 570 mm Capacity: 2000 kg Year: 2018 Hours: 5557 hours Battery capacity: 24 V / 344 Ah - NEW - Built 07/2025 Hjdpew Nydtjfx Aacjnu Options: * EX * Atex - Pyroban!!! Gas group = IIIB Type = 3D (permitted in ZONE 22) Temperature class = T4 (135°C)

Condition: used, Electric loading lift – pedestrian stacker, pallet stacker truck For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225P (lift2move) Serial No.: 19500S Year of manufacture: 2008 Type No.: Rated load capacity: 225 kg Lift travel: 1680 mm Lift height: 2200 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Lifting aid outreach: 861 mm Chassis length: 1020 mm Hnedpfoflt Edjx Aacou Underclearance height: 90 mm Underclearance length: 600 mm Chassis design (front / rear): Ø 80 / 140 mm (2 fixed castors / 2 swivel castors) Overall length: 1400 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Handheld remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge level indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in battery pack - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Continuously height-adjustable handle - Load pick-up flange as per EXPRESSO standard Special version: Lifting aid by GIESLER for radial fan SC-1000 CP XT (Tiger) - Lifting aid load capacity: 25 kg - Lifting aid can be swivelled 90° via manual hydraulic pump - Jaw opening between support jaws: 300 / 330 mm - Jaw opening between clamping rollers: 200 – 300 mm - Clamping via handwheel - Lifting aid net weight: 60 kg Total weight: 140 kg Very good condition

Condition: good (used), functionality: fully functional, YE 2018 BH 3.169 1,155mm fork Hnsdpfx Asvazvnjacsu Battery weight 451kg

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 2,803 h, load capacity: 800 kg, fuel type: electric, drive type: Elektro, Low-level order picker Condition: Ready for use and fully functional Technical condition: good Battery voltage: 24V Hsdpfx Aoxfnyyoacenu

Condition: excellent (used), Year of construction: 2016, operating hours: 23,170 h, clamping force: 2,500 kN, screw diameter: 60 mm, injection pressure: 2,005 bar, injection weight: 618 g, mold height (min.): 330 mm, Injection molding machine Krauss Maffei 250-1400CX with robot and gas boost (225) Product Code: 225 Availability: In Stock Year of production: 2016 Brand: KRAUSS MAFFEI Technical data Shot Weight: 618 g Injection speed: 848 ccm/s Clamping Force: 2,500 kN Screw dia: 60 mm Injection pressure: 2005 bar Hnedsvtzkfopfx Aacsu Tie bar distance: 630x630 mm Platen size: 1135x1180 mm Mould height min.: 330 mm Total day-light max: 1150 mm Type of controls: MC6 Language: German Power: 70 kW Workinghours: 23170 h Weight: 15000 kg Dimensions: 6,5x2,3x2,3 m Hopper: No Core pull: Yes Euromap: Yes Air valve: Yes Heating channels: Yes Gas bottle: Yes Picker or robot: Yes

Condition: used, Complete Factory Package for Processing PVC and Aluminium Profiles – Block Sale Includes the following machinery: 1️⃣ Machining Centre – Mecal MC 304 Atlas 4-axis machine equipped with a frontal processing head, specifically designed for aluminium machining. 2️⃣ Welding and Cleaning Line – ProfteQ QUADOS Equipped with: 4-head welder (QUAD OS12) + transfer/cooling table + CNC corner cleaning machine (FRT9) + automatic loading table. 3️⃣ Double-Head Cutting-Off Machine – Tekna TK 145 Blade Ø 500 mm, maximum cutting length 4000 mm, external blade tilting. 4️⃣ Cold Saw – ALTECH GOTHA (complete with roller conveyors) Single-head ascending blade saw Ø 450 mm, blade tilting -45° / +45°, blade rotation with digital angle display. 5️⃣ Glazing Bead Cutting Machine – RobTech MAESTRO Designed for cutting aluminium and PVC glazing bead profiles with four blades positioned at 45°. 6️⃣ End-Milling Machine – FOM Mistral 26A For aluminium profiles with variable angles, performing end-milling operations from 45° right to 45° left and intermediate positions. 6b️⃣ Single-Head Cutting Machine – MG TLG 350 Blade Ø 350 mm, table rotation: 45° - 0° - 90°. 7️⃣ Two-Head Drilling Machine – FOM 8️⃣ Vertical Assembly Bench for Glass and Glazing Beads – ProfteQ BV7 + Bench – Rotox VPAH 3023 9️⃣ Assembly Table – FOM Podium Hnsdpfev Ig Hhsx Aacsu 🔟 Double-Sided Cantilever Rack – 1 Block (9 Shelves per Side) (Multiple units available). 11️⃣ Electric Forklift – Career R30N S (4 wheels) Capacity: 3,000 kg, complete with side-shift. 12️⃣ Electric Order Picker – OM XOp Capacity 1,200 kg, lifting height 6,725 mm, fork length 800 mm.

Condition: used, functionality: fully functional, machine/vehicle number: 6598789, Year of construction: 2018, operating hours: 3,638 h, load capacity: 2,500 kg, fuel type: electric, construction height: 1,300 mm, fork length: 2,400 mm, empty load weight: 1,285 kg, drive type: Elektro, Low Level Order Picker Chassis number: 6598789 Condition: Ready for use and fully functional Technical condition: good Battery voltage: 24V Hnedjw I H N Topfx Aacsu Battery capacity: 600Ah Battery year: 2020 Description: BT LPE 250 No.: M0576 Year of manufacture: 2018 Operating hours: 3,638 The unit is in good visual and technical condition. Errors and prior sale reserved. If you have not found your desired forklift, please contact us. We have a wide selection of other units on site.

Condition: used, Electric Loading Lift - Mobilift for ergonomic handling of small loads Pedestrian stacker, pallet stacker Manufacturer: TransOrt Model: PRO 140 M Serial No.: P14012557 Year of manufacture: 2018 Rated capacity: 140 kg (with 400 mm outreach) Lifting stroke: 1380 mm Lifting cycles per charge: 140 kg x 1 m x 100 times Lift height: max. 2900 mm (underside of jib) Lifting speed (fast / slow): approx. 100 / 50 mm/s Outreach (load handling device): 890 mm Chassis length: 1100 mm Chassis width: 440 to 740 mm adjustable (internal measurement) Chassis height: 85 mm Underride length: 620 mm Chassis design (front / rear): Ø 80 / 125 mm (2 fixed / 2 swivel castors) Total length: 1450 mm Total width: 635 mm Overall height: 1980 mm Maximum height: 2980 mm (with lifting device extended) Battery capacity: 24 V / 18 Ah - Electric lifting drive via toothed belt with safety mechanism that Hedpfx Ajpcqdwjacenu stops the descent via freewheel as soon as the load contacts an obstacle. - Cable remote control with spiral cable and buttons for 2 lifting speeds - Control panel with emergency stop, on/off, and battery status indicator - Battery pack with quick-change system - 2 x 12 Volt, 18 Ah lead-acid batteries installed in battery pack - Integrated charger 24 VDC, 80 Watts - Manually maneuverable, steering castors with three-level parking brake - Continuously height-adjustable handle - Load pickup quick coupling TAWI system - Flange plate for quick coupling on the jib 30 x 340 mm with 5x M8 threaded holes Net weight of loading lift: 75 kg Installed lifting aid: Counterbalance jib made of 60 x 40 x 3 mm rectangular stainless steel tube Lifting aid capacity: 50 kg Outreach to handle: 865 mm Hanging handle with knurled nut Net weight: 13 kg As new condition, unused ex stock 2 units available, price per unit

Condition: used, Year of construction: 2018, load capacity: 2,500 kg, fuel type: electric, fork length: 2,400 mm, For sale are 7 used order pickers, each equipped with an interchangeable battery, a change table, and a charger. Order Picker: 6593038 Operating hours: 7,485 UVV inspection expired as of 10/24. Order Picker: 6593036 Operating hours: 6,915 UVV inspection expired as of 10/24. Order Picker: 6593034 Operating hours: 7,103 UVV inspection expired as of 10/24. Order Picker: 6593035 Operating hours: 6,687 UVV inspection expired as of 10/24. Order Picker: 6593033 Operating hours: 7,031 UVV inspection expired as of 10/24. Order Picker: 6593039 Operating hours: 7,408 UVV inspection expired as of 10/24. Hedpfxjw Rfcws Aaconu Order Picker: 6593037 Operating hours: 7,805 UVV inspection expired as of 10/24. Viewing of the equipment is possible by appointment. Please contact us for further information, your price enquiry, or to schedule a viewing appointment.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,289 h, load capacity: 800 kg, fuel type: electric, drive type: Elektro, Low-level order picker Condition: Ready for use and fully functional Hodpfx Ajxfnt Heaconu Technical condition: good Battery voltage: 24V

Condition: used, Stäubli Type: TP80 robot / CS8C controller Four-axis robot with controller The Staubli TP80 robot is a 4-axis SCARA robot, It offers a 0.5 kg payload and 800 mm reach. The repeatability of the Staubli TP80 robot is 0.05 mm and the weight of the robot is approximately 71 kg. Common applications for the Staubli TP80 include: Assembly, material handling. Staubli TP80 TP Picker / 4 axes Features: Maximum payload 1 kg Nominal load 0.5 kg Reach 800 mm Number of degrees of freedom 4 Working range: Working range axis 1 (A) ± 117° Working range axis 2 (B) ± 153° Stroke (C1, C2) 100 mm Working range axis 4 (D) ± 500° Working range: Max. Max. reach between axes 1 and 3 (r.M) 800 mm Min. reach between axes 1 and 3 (r.m1) 174 mm Cycle time, with continuous use and 25° C Cycle 25-300-25 mm to (ppm = picks per minute) Load capacity 0.1 kg 200 ppm Load capacity (0.5 kg) 185 ppm Load capacity (1 kg) 170 ppm Cycle 50-700-50 mm up to (ppm = picks per minute) Load capacity 0.1 kg 110 ppm Payload 0.5 kg 105 ppm Load capacity 1 kg 95 ppm Repeat accuracy ISO 9283 < ± 0.05 mm Hedpeu H An Ajfx Aacjnu Maximum inertia (axis 4) 0.014 kg.m² Weight 71 kg Power supply 24 VDC - 2A Clean room class - ISO 14644-1 Features: Stäubli CS8C controller Ethernet, fieldbus, digital inputs and outputs, serial interfaces Easy to integrate, 19-inch rack-mount version, protection class IP20 All connections on the front. Dimensions (H x W x D) 331 x 445 x 455 mm Protection class IP20 (IP54 optional) Working memory 64 MB RAM (min.) Memory capacity 128 MB (min.) Flash disk and USB port System/programming language VAL 3 (multitasking-capable interpreter language), PLC-IEC 61131-3 language Communication Serial interface RS232/422, Ethernet, ModBus/TCP server Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2015, condition: ready for operation (used), Was used for toast rolls, includes 2x pick & place robots ABB FlexPicker IRB 360 for grouping, IRC with PC processor, PC, monitor and visualization, Komatec vision system, Siemens S7, remote maintenance, operation on swivel arm, picker 1&2 suction grippers, various belts for product transport and frame with protection system. Hnedpfjrdhhyox Aaceu

Condition: used, functionality: fully functional, machine/vehicle number: 90255991, operating hours: 6,238 h, load capacity: 2,000 kg, fuel type: electric, construction height: 1,350 mm, fork length: 1,150 mm, drive type: Elektro, Low lift order picker Chassis number: 90255991 Condition: Ready for use and fully functional Technical condition: normal Battery Volt: 24V Battery Ah: 250Ah Battery year of construction: 2015 Description: Jungheinrich No.: M0101 Operating hours: 6238 The device is visually and technically in good condition. Subject to errors and prior sale. If you have not found your truck, please contact us. We have a large selection of other trucks on site. Hedpfxouhwxvj Aacenu

Condition: used, Electric loading lift - pedestrian stacker, pedestrian stacker for ergonomic handling of small loads EXPRESSO type Lift & Drive 125 (lift2move) Series. No. 194679 Year of construction 2015 Type no. 1418242111 Nominal load capacity 125 kg Lifting distance 1450 mm Lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Projection of lifting aid 530 mm Chassis length 890 mm Underride height 90 mm Underride length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Hnedpfxjflt Ebj Aacju Battery capacity 24 V / 7.2 Ah - Electric lift drive with motor brake / self-locking gear and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 lead-acid batteries 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 amps (mains voltage 230 V, 50 Hz) - Can be rolled by hand, swivel castors with three-stage parking brake - Handle infinitely height-adjustable - Load support U-profile for square according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm/ 4 M8 fixing holes at 50-60-50 mm intervals Mounted lifting aid: Special version from GIESLER LAM-DC conductor rail Load capacity of the lifting aid 40 kg Dead weight of lifting aid 24 kg Support rail can be moved sideways +-90 mm via linear guides (3 locking points left, center, right) Support rail can be swiveled +-38° (continuously lockable) Support rail with 2 clamps Distance between the clamps 550 mm Material clamping thickness 100 mm Material support dimensions W x D 650 x 155 mm Total weight 75 kg Very good condition

Condition: used, Year of construction: 2012, operating hours: 2,773 h, Jungheinrich - EKS308 | 2012 High-lift order picker used ● Manufacturer: Jungheinrich ● Type: EKS308 750DZ ● LSP: 600 ● Drive type: Electric ● Design: High-lift order picker ● Year of manufacture: 2012 ● Lifting mast type: TRIPLE ● Lifting height: 9500 mm ● Overall height: 4125 mm ● Free lift: 1805 mm Hodjv Hf Riepfx Aacjnu ● Fork carriage: Width: 800 mm ● Length: 2075 mm ● Width: 1300 mm ● Height: 4125 mm ● Battery: YES ● Own weight: 3750 kg ● Operating hours: 2773h ● Accessories: Battery: / 48 Volt 4 PzS 620 Ah (year of manufacture 06/2012) Steel frame, front axle tires: bandage, 180° steering, mast protection: glass pane, outside mirror, mechanical with electric drive release, lifting height indicator, original fan, lifting height limitation from 900mm, without protective frame also limited from free lift, LED strips 2x inside 2x outside. Warning light front + rear,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 2,007 h, load capacity: 1,000 kg, lifting height: 1,800 mm, fuel type: electric, mast type: standard, drive type: Elektro, Medium lift order picker Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Hnedpsxfd Igofx Aacju Battery Volt: 24V

Condition: excellent (used), Year of construction: 2016, load capacity: 2,700 kg, fuel type: electric, Equipment: fork extension, Crown GPC 3060P order picker Manufacturer: Crown Type: GPC 3060P The Crown GPC 3060P is a powerful and reliable order picker designed for demanding industrial applications. With a load capacity of 2,700 kg and a robust design, it is ideal for use in warehouses, logistics centers and other work environments. Equipped with state-of-the-art technology and an ergonomic design, the Crown GPC 3060P offers efficient performance, precise control and maximum operator comfort. Features 1. maintenance-free three-phase AC drive and steering motors 2. e-Gen™ braking system provides regenerative and friction-free electric braking 3. electronic steering with center-mounted X10 tiller for precise and effortless steering 4. the self-centering X10 tiller combines all device functions and can be easily reached with the fingers 5 Crown's comprehensive system control Access 1 2 3 6 The intelligent steering system reduces the driving speed when cornering 7. load-dependent speed 8. information display from Crown - Single-line LC display with 8 characters - Battery discharge indicator - Keyless switch-on via PIN code - Start and operating time diagnostics - 3 selectable driving performance profiles - Operating hours counter, including for drive motor, hydraulic motor and operating time - Access 123 vehicle diagnostics with real-time fault detection 9. CAN bus technology 10. ramp stopper function 11. low access height of 130 mm with wide passageway 12. sprung driver's platform with non-slip floor mat for fatigue-free working and integrated presence sensors 13. electric emergency stop switch 14. spacious storage compartments - Large front storage compartment - Lower backrest cover with foil storage compartment (3040/3060) - 2 large storage compartments in the backrest (3040/3060) 15. drive wheel, support wheel and tandem load rollers made of Vulkollan 16. comfort backrest (3040/3060) included 17. solid drive unit - 10 mm thick steel ram protection - Easily removable, steel-reinforced covers - Battery access from above Specifications Manufacturer: Crown Model: GPC 3060P-2. 7t Drive: Electric Load capacity: 2.7 t Tyres: Vulkollan Front tire size: Ø 250 x 75 mm Rear tire size: Ø 82 x 82 mm Support wheel: Ø 150 x 60 mm Front track width: 492 mm Rear track width: 500 mm Lift height: 150 mm Operator's platform height: 130 mm Tiller height: 1160 mm Fork height lowered: 90 mm Overall width: 810 mm Fork tine dimensions: 78 x 180 x 2400 mm Fork outer clearance: 680 mm Ground clearance under mast: 20 mm Ground clearance center wheelbase:28 mm Aisle width: (2 Euro pallets lengthwise, raised) 4045 mm Turning radius lowered: 3245 mm Travel speed with/without load: 8.5 / 12.5 km/h Lifting speed with/without load: 0.06 / 0.08 m/s Hnodpfx Aotqm Ifsaceu Lowering speed with/without load: 0.07 m/s Gradeability with/without load, KB 30 min: 5 / 16 % Service brake: electric Traction motor Power at S2 60 min.: 3.2 kW Lift motor Power at S3 15 %: 2.2 kW Max. Battery tray size: 330x790x784 mm Battery voltage: 24 V / 620 Ah Weight with battery: 2700 kg Battery weight: 509 kg Year of manufacture: 2016 Operating hours: 150/165/170 Since the article is available several times, there are different operating hours. Delivery is random. Scope of delivery 1 x Crown GPC 3060P order picker + 1 x positioner

Condition: ready for operation (used), Year of construction: 2003, A narrow aisle order picker Still with a telescopic lift mast and a swivel reach fork is available. Battery: 3 EPzS 456, capacity: 456Ah, load capacity: 1300kg, lift height: 6005mm, overall height: 3400mm, stand height: 4700mm, reach height: 6300mm, width: 1600mm, lift and lower speed: 420mm/s, unladen weight: approx. 6900kg, battery weight: approx. 1300kg, operating hours: 1895h. Documentation available. An on-site inspection is possible. Hnsdjw Ni Ihopfx Aacju

Condition: used, functionality: fully functional, machine/vehicle number: 6568443, Year of construction: 2018, operating hours: 1,136 h, load capacity: 1,200 kg, lifting height: 5,540 mm, free lift: 1,200 mm, fuel type: electric, mast type: standard, construction height: 3,100 mm, fork length: 1,200 mm, empty load weight: 5,950 kg, drive type: Elektro, High-lift order picker Chassis number: 6568443 Mast type: Standard Condition: Ready for use and fully functional Technical condition: very good Battery Volt: 80V Hedew I H Najpfx Aaconu Battery Ah: 960Ah Battery year of construction: 2018 Description: Toyota VCE 120 No.: M0446 Year of manufacture: 2018 Operating hours: 1,136 The device is visually and technically in very good condition. Charger on request Errors and prior sale reserved. If you have not found your truck, please contact us. We still have a large selection of other devices on site.

Condition: used, Electric Loading Lift – Pedestrian Stacker, Tiller Stacker for ergonomic handling of small loads Hnodpfx Aaeflt Efecou Manufacturer: EXPRESSO Model: Lift & Drive 175 (lift2move) Serial No.: 19152 Year of manufacture: 2010 Type No.: Rated capacity: 175 kg Lift travel: 1090 mm Lift height: 1780 mm Lifting speed (unloaded / loaded): approx. 100 / 75 mm/s Reach of lifting aid: 800 mm Chassis length: 1100 mm Underride height: 175 mm Underride length: 670 mm Chassis version (front / rear): Ø 120 / 150 mm (2 swivel castors / 2 swivel castors) Total length: 1220 mm Total width: 700 mm Overall height: 1950 mm Maximum height: 2870 mm (with lifting aid fully extended) Motor power: 400 W Battery capacity: 24 V / 17 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with coiled cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 x Lead-acid batteries, 12 Volt, 17 Ah in battery pack - External charger 24 VDC, 3 Ampere (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Continuously height-adjustable handle - Load carriage double flange according to EXPRESSO standard, 2 pieces mounted on top of each other, each 280 x 50 mm / 4 mounting holes M10 Mounted lifting aid: Rotatable Roller Mount Expresso Type 04175470 Lifting aid load capacity: 70 kg Rotation via electric drive with stepless speed control Rotation range: 360° continuous Roller arms individually adjustable steplessly on linear guides Roller arm span min./max.: 1350 - 2050 mm (infinitely adjustable) Roller arm depth: 560 mm In the center of the roller arms is a workpiece holder (adjustment range 0 - 80 mm) Total weight: 150 kg good condition

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 2,315 h, load capacity: 2,000 kg, fuel type: electric, drive type: Elektro, Low-level order picker Condition: Ready for use and fully functional Hodpsxfd Hiefx Aacjnu Technical condition: good Battery voltage: 24V

Condition: used, Electric Load Lift – Pedestrian Stacker, Pallet Truck For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 175 (lift2move) Serial No.: 19153 Year of manufacture: 2011 Type No.: Rated capacity: 175 kg Lift travel: 1880 mm Lifting height: 2760 mm Lifting speed (unladen / laden): approx. 100 / 75 mm/s Lifting aid outreach: 730 mm Chassis length: 970 mm Underride height: 90 mm Underride length: 485 mm Chassis configuration (front / rear): Ø 60 / 100 mm (2 swivel castors / 2 swivel castors) Overall length: 1220 mm Overall width: 600 mm Construction height: 2450 mm Hjdpfx Aofr Izgjacenu Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Wired remote control with spiral cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Charge level indicator - 2 pcs lead-acid battery 12 Volt, 17 Ah integrated in battery pack - External charger 24 VDC, 3 Amp (mains voltage 230 V, 50 Hz) - Manually maneuverable, swivel castors with three-stage parking brake - Infinitely adjustable handgrip height - Load mounting flange according to EXPRESSO standard 280 x 50 mm / 3 mounting holes M10 spaced 110-110 mm Fitted lifting aid: Pivoting jib arm Lifting aid load capacity: 60 kg Pivoting range: ±30° (lockable only at 0°) Jib arm length: 600 mm - Steplessly adjustable load eye, hole diameter 30 mm Total weight approx. 100 kg good condition

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 5,910 h, load capacity: 1,200 kg, lifting height: 8,310 mm, fuel type: electric, mast type: standard, construction height: 3,600 mm, drive type: Elektro, High lift order picker Hnsdpfx Asxbmfteaceu Mast type: Standard Condition: Ready for use and fully functional Technical condition: good Battery Volt: 48V

Condition: used, High lift pallet truck, pedestrian stacker, pedestrian stacker HANSELIFTER - Hanse-Lifter Type E-SDJ1016-01 Hjdshxvuwopfx Aacjnu Wide-track pallet truck Series. Year of construction 2014 Rated load capacity pedestrian stacker 1000 kg Load capacity special construction device GIESLER 200 kg Nominal lift height 1600 mm Fork length 530 / 770 mm Fork carriage width 950 mm Underride height of wheel arms 130 mm Operating voltage hydraulic unit 12 Volt Overall height 2160 mm Overall length 1650 mm Overall width 1860 / 1200 mm - Manual driving mode - Electro-hydraulic lifting device - adjustable track width from 950 to 1650 mm (width between the wheel arms) - 1 12 volt battery - separate charger 12 Volt, 15 Ampere - Steel fork carriage on the mast - Fork carriage special construction device GIESLER, load capacity 200 kg - Fork carriage made of aluminum plate with precision guide, lateral adjustment via clamping lever - Stainless steel forks, complete length 770 mm to swivel plate - Forks cannot be lowered to the ground due to special construction device (approx. 170 to 250 mm depending on track width) Dead weight 485 kg as good as new condition

Condition: used, Electric Lift Table – Walkie Stacker, Pedestrian Pallet Stacker For ergonomic handling of small loads Manufacturer: EXPRESSO Model: Lift & Drive 225 (lift2move) Serial No. 19153-HD Year of manufacture: 2010 Model No.: Rated load capacity: 225 kg Lift travel: 1770 mm Lift height: 2350 mm Lifting speed (unladen / laden): approx. 100 / 75 mm/s Load cantilever: 400 mm Hedpfoflt Egjx Aacjnu Chassis length: 1130 mm Underride height: 90 mm Underride length: 600 mm Chassis version (front / rear): Ø 80 / 150 mm (2 fixed castors / 2 swivel castors) Overall length: 1130 mm Overall width: 600 mm Overall height: 2450 mm Motor power: 400 W Battery capacity: 24 V / 16 Ah - Electric lift drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Wired remote control with spiral cable and button for 2 lifting speeds - Battery pack with quick-change system - Charge status indicator - 2 x 12 Volt, 17 Ah lead-acid batteries installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amp (mains voltage 230 V, 50 Hz) - Manually movable, steering castors with three-stage parking brake - Continuously height-adjustable handlebar - Load mounting flange as per EXPRESSO standard 380 x 50 mm / 4 mounting holes M10, spacing 100-120-100 mm Fitted lifting aid: Four-prong fork attachment, Expresso type, Rated load of lifting aid: 40 kg - Lifting aid manually swivelled by 90° (lockable only in 0° position) - Lifting aid laterally adjustable on linear guide by ±100 mm (locking only in center) - Width between support arms: 320 mm - Height between support arms (lockable at): 365 / 400 / 450 mm (max. opening without locking holes: 510 mm) - Depth between support arms: 150 mm up to stop bolt / 300 mm max. Total weight: 100 kg Good condition