Used Perforation for sale (887)

Condition: excellent (used), Year of construction: 2017, Uncompromised performance and precision: The G3 digital cutting system is based on the most flexible, adaptable, and easily expandable machine concept on the market. Operating hours 2.700 Tools Camera New PC - touch screen UCT KCT EOT-250 CTT1 CTT2 VCT Router 1Kw Diverse Creasing wheels Diverse perforating knives Belt replaced in 2025 Zund Cut Center updated 2026 Godpfx Ajzu Av Ujg Teuh Vacum pump replaced in 2026 In production, demo possible upon request

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 - Year built: 03/2026 - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. Guedpjz I Dzijfx Ag Tsh First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide belt sanding machine with electronic segmented sanding pad and finish sanding Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of coated surfaces. Bookbinding machine with combined unit and electronic articulated pressure bar, edge segments can be switched on and off Segment width of the pressure bar 35mm Contact roller can be pneumatically adjusted, low wear due to corrugated steel roller Grain compensation Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s Belt feed steplessly adjustable via frequency inverter from 2.5 - 13m/min Pneumatic workpiece-controlled belt blowing device Cleaning brush at the outlet Constant working height 900mm by adjusting the upper part of the machine, thus also integrable into sanding lines Feed belt still has good grip and is in very good condition Gusdpfxjzqvmrj Ag Tjh Maximum sanding width approx. 1340mm Workpiece height approx. 3 to 150mm Common sanding belt dimension 1360 x 1900mm 3 rubberized pressure rollers Infeed roller table and foldable outlet table Preparation for vacuum blower. The belt is perforated and plugs for optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection 1 x 200mm, 1 x 140mm and 2 x 100mm Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar engagement points at the front and rear as well as edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller CE marking Operating manual without the illustrated connection cable Original paint, only touched up in places Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: good (used), Year of construction: 2010, machine/vehicle number: 2005, Automatic Perforating & Creasing machine Guedpfoy Txkbox Ag Tjh

Condition: good (used), Year of construction: 1988, - Year of construction: 1988 - Membrane: PVC, 2019. Godpjv Uw U Aofx Ag Teuh - Stainless steel cage, semi-perforated - Frame: Made of steel, on castors - Mesh size: Stainless steel, Friedrich connection no. 2 40 - Central filling Dimensions: - Length: 3400 mm - Width: 1750 mm - Height: 2300 mm

Condition: refurbished (used), functionality: fully functional, This excellently maintained Agilent 1200 HPLC system is ready for immediate use and provides a reliable solution for both routine and advanced chromatographic analyses. Annual preventive maintenance has been performed by certified Agilent Service Engineers. The final maintenance and qualification were performed in July 2026, during which the system successfully passed the inspection (PASS). Configuration: Agilent 1200 Solvent Tray Gjdpfjzy Hldjx Ag Tjuh Agilent 1200 Vacuum Degasser G1322A Agilent 1200 Quaternary Pump G1311A Agilent 1200 Series Standard Autosampler G1329A Agilent 1200 Thermostatted Column Compartment G1316A with integrated switching valve Agilent 1200 Series Diode Array Detector (DAD) G1315B PC with Windows 10 Agilent ChemStation CDS software included 6-month warranty Enjoy 25% off your first service when you sign up for a maintenance contract with us.

Condition: used, Year of construction: 1996, functionality: fully functional, High-performance planing and profiling machines / four-sided planer Manufacturer: Weinig Model: Hydromat 30 / H 30 N System originates from a parquet factory Planing width: approx. 220 mm Planing height: approx. 120 mm Spindle arrangement: Bottom (joiner), 22 kW Right, 7.5 kW Left, 18 kW Top, 30 kW Spindle diameter: 50 mm Feed speed adjustable, 12 – 120 m/min. Gjdpez D Exbsfx Ag Tjuh Voltage: 380 V, 50 Hz

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm Guodpfxjwh Tq Sj Ag Tsh • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Year of construction: 2026, condition: new, functionality: fully functional, Screen Meshes and Perforated Sheets for VS Screening Machines Our high-quality screen meshes and perforated sheets are designed for efficient screening of soil, wood chips, gravel, and building rubble. Each mesh and sheet is built for durability, precision, and easy replacement - ideal for VS COMPACT, VS MEDI, and VS BIG models. Mesh Specifications: • Replaceable steel screen mesh Guedpfx Aexm S Eisg Tjh • Standard opening: 20x20 mm, squared • Wire diameter: Ø3 mm • Fits all VS machines sizes • Custom openings available from 3 to 100 mm Perforated Sheet Specifications: • Replaceable cold-rolled steel sheet • Standard hole size: Ø20 mm, rounded • Thickness: 2 mm • Compatible with all VS models • Custom perforations from 3 to 100 mm For custom mesh sizes or other modifications, contact us - we offer tailor-made solutions for all VS screening machines.

Condition: good (used), Offer 25178 Technical Data: - Table surface area approx.: 1200 x 800 mm - Hole diameter: 28 mm - Hole spacing: 100 mm - Table height: 880 mm - Lighting - Power strip Gjdpfxewu T H Tj Ag Tjuh - Pneumatic connection - Space requirement approx.: W 1400 x H 2400 x D 1100 mm - Weight approx.: 150 kg

Condition: refurbished (used), functionality: fully functional, pump pressure: 400 bar, This excellently maintained Agilent 1100 HPLC system is ready for immediate use and provides a reliable solution for both routine and advanced chromatographic analyses. Annual preventive maintenance has been performed by certified Agilent Service Engineers. The last maintenance was performed in July 2026, during which the system successfully passed the inspection. Configuration: Guedozzdxqepfx Ag Tsh Agilent 1100 Solvent Tray Agilent 1100 Vacuum Degasser G1322A Agilent 1100 Quaternary Pump G1311A Agilent 1100 Standard Autosampler G1329A Agilent 1100 Thermostated Column Compartment G1316A Agilent 1100 Variable Wavelength Detector (VWD) G1314A Agilent 1100 Controller G1323B 3-month warranty 3-month warranty

Condition: ready for operation (used), Perforated plate Manufacturer unknown Gsdpfx Aofpgp Eeg Tjuh Dimensions: 1500x1500 mm Working height: 940 mm – height adjustable Feet are screwed on Plate thickness: 110 mm Hole diameter: 45 mm Weight: approx. 2.0 tons

Condition: excellent (used), Perconta Contomat – High-performance self-service coin deposit terminal. Contomats are increasingly taking over routine tasks for bank employees. Guodpfx Ajivd E Tsg Teh The trend, which set new standards with automatic cash dispensing and the printing of account statements, continues in coin processing with the Contomat. If you are looking for a solution for customer-oriented cash deposit, the self-service terminal Contomat is the perfect choice. You can find other coin deposit terminals in various sizes – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions: Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions: Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm H x W x D 2000 x 2200 x 2000 mm Paint finish: Light grey (RAL 9002) Door, double-leaf: Hinged on the left and right Equipment: Pass-through in the floor and ceiling: 2 each, DN 100 mm, for inserting the pulsation tables Pass-through in the side walls: 1 each, left, right, 100 mm Refrigeration unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the steady state Temperature change rate measured in the outlet without a test specimen and without a load - Cooling: 0.5 K/min. on average, between +100 and +20 °C - Heating: 0.5 K/min. on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage For trouble-free operation of the system, the ambient temperature must be between +10 and +35 °C Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Godsxbgrgjpfx Ag Tjuh Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic topping up Condensate drain: back-pressure-free, 3/4" hose connection Power connection: 400 V; 3 PH+N PE; 50 Hz Connected load: max. 10 KVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen change, 12 weights each weighing 5 kg • 1 base frame in normal steel welded construction for attachment to the underside of the climate testing chamber. This frame is provided on all sides with removable sheets and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearings and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttocks replica • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered subsequently after a precise definition) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control system with 2 manual valves, one filter-regulator unit and one shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons,

Condition: used, Year of construction: 2023, Cutting area: 5600x5600 mm 1x Gabbiani G 3 130 (56) - High-performance panel dividing saw 1x Compact label printer 1x "eye-M EVO" control console 1x Human-Machine Interface (HMI) software MAESTRO ACTIVE 1x Maestro pattern 1x High-performance fixed air cushion table with guide, 2500x600 mm, with infeed rollers 3x High-performance mobile air cushion table - 2500x600 mm, with infeed rollers 1x Double-sided automatic lateral aligner with motor drive 1x Foot switch for START/STOP of the work cycle 1x Set-up for grooving with height adjustment of the saw blade via the control system 1x "Autosetting" device on the saw carriage for cutting length/width 1x Main saw blade motor 25 hp (18 kW) 50 Hz with star-delta starter 1x Quick clamping of the saw blades with mechanical flanges "AKE" 1x Selective collet closure (area 0 - 1600 mm) 3x Additional double collet 4x Additional collet with single finger Gsdpoxlvktofx Ag Teuh 1x Compact Office label printer 1x Cut editor 1x Maestro optiwise - Advanced - N. 1 license 1x Maestro connect: Service agreement for 1 year (including "plug&play" gateway kit) 1x Base 1x MACHINE LANGUAGE: German 1x PC LANGUAGE: German 1x SPEC01 Special version 01 1x European safety regulations (CE marking) incl. 123 hours of on-site commissioning (within Germany) (daily working hours are 8 hours including travel time). incl. 1 day online training MAESTRO OPTIWISE PRO (as needed) incl. MAESTRO CONNECT 1 year incl. MAESTRO PATTERN IMPORT (255€ free of charge)!!! FULL MANUFACTURER'S WARRANTY IN THE FIRST YEAR!!! Due to customer insolvency, offered for sale at a reduced price. Location:

Condition: like new (used), Year of construction: 2021, High-performance industrial imager Manufacturer: DATALOGIC Model: AV500-258W Year of manufacture: 2021 Condition: used (lightly used) FEATURES • 5 MP image sensor, 32 FPS • Patented dynamic or adjustable focus system for extended depth of field • Continuous, blink-free white illumination • Region-of-interest windowing for higher frame rates Guodpfowbg Drox Ag Teh • Next-generation decoding algorithm for outstanding decoding performance with 1D, 2D, stacked, and postal symbologies • Gigabyte Ethernet and SyncNet high-speed connectivity • PackTrack feature for closer item spacing • Image storage in various formats from full resolution to highly compressed JPG • Datalogic's patented "Green Spot" technology for visual good confirmation • Dual laser targeting for easy installation • Browser-based e-GENIUS interface compatible with all operating systems and hardware platforms, including PCs and Tablets • Extremely industrial-grade: IP65 for harsh environments with operating temperatures from 0 to 50°C Communication Interfaces: 2 Ethernet TCP/IP, 2 serial ports, Internal communication interfaces System SyncNet technology Connection modes: Master/Slave, Ethernet point-to-point Programming method: e-GENIUS multilingual, browser-based, integrated HTML web server interface The AV500 reader sets a new optical standard for unattended data capture solutions with an industry-leading 5-megapixel CMOS sensor, 32 frames per second image capture, dynamic or adjustable focus, and various lens options. With its wide field of view and excellent depth of field thanks to various dynamic focus options, the AV500 barcode reader is the ideal choice for smart track logistics solutions, baggage handling systems, and smart distribution applications in retail.

Condition: used, Year of construction: 2006, 32 x 65 cm - Maximum paper size: A3 (up to SRA3 format) - Functionality: Multifunctional finishing for creasing and cutting Gujdpfxswv D Hmo Ag Tjh - Applications: Ideal for business cards, brochures, and other printed materials - Efficiency: Precise cutting and creasing for a fast and accurate workflow

Condition: used, Year of construction: 2015, machine/vehicle number: 30589, Perforationswerkzeug - Perforation tool Tränklein 30589Year 2015 - Serial-No. 30589 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Godpfsh Ax Dvex Ag Teuh

Condition: used, axle configuration: 3 axles, first registration: 12/2003, tire size: 385/65R22,5, Kögel 3-axle semi-trailer, open platform/flatbed, perforated outer frame. Sale exclusively to commercial businesses, with no warranty of any kind. Subject to errors and prior sale. Guedpfezcpyqjx Ag Tsh

Condition: as good as new (ex-display), functionality: fully functional, A very nice folding machine is for sale. Brand: Tachoplus, model TC 6012. Paper weight up to 350 grams, size DIN A3, 20 programs. Comes complete with a user manual. You are welcome to test this machine at our location. We can arrange transportation and packaging for you and load it into a truck or container. Please request a price including transportation (location within the Netherlands). Gedez Hbaaepfx Ag Touh Best regards, Henk Hoos.

Condition: used, mileage: 211,894 km, power: 95 kW (129.16 HP), first registration: 08/2014, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: automatic, emission class: euro5, number of seats: 3, loading space length: 3,302 mm, loading space width: 1,795 mm, loading space height: 2,012 mm, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Buy online. Finance digitally. Get it delivered nationwide. Chat with us now via WhatsApp: Get in touch quickly and easily with our sales consultant. Internal ID number: 3636 Your advantages with us: Digital consultation by phone or WhatsApp * Financing options even without a down payment * Trade-in of your vehicle - whether old or new Optionally bookable: 12-60 months used car warranty (valid throughout the EU) * New inspection * New TÜV & AU (German vehicle inspection) * Nationwide delivery * Rear view camera can be retrofitted on request Vehicle highlights: * Complete workshop equipment - ready for immediate use * Workbench with vice, drawer cabinets & shelves * Compressed air compressor in the cargo area * Automatic transmission * High roof - headroom approx. 2.01 m in the cargo area * 2.1 L CDI with 95 kW (129 hp) * Air conditioning & cruise control * Parking assist Parktronic * Auxiliary battery with separation relay * Trailer hitch optional - 2,000 kg towing capacity * Euro 5 - green emissions sticker * 3 seats Cargo area (approx. internal dimensions): Length 3,302 mm x Width 1,795 mm x Height 2,012 mm Equipment overview: Cargo area & workshop conversion Workbench with wooden work surface & vice * Several drawer cabinets * Shelf systems on both sides * Compressed air compressor * Wood paneling & perforated board partition Guedpoz Nu N Iofx Ag Teh * Solid cargo area partition * Tie-down points * Sliding door on the right * Rear doors 180° Comfort Automatic transmission * Air conditioning * Cruise control * Radio with CD (Audio 10) * Electric windows * Electrically adjustable & heated exterior mirrors * Central locking * Comfort suspension seat driver with armrest * Double passenger seat * Outside temperature display Safety ABS, ASR & ESP * Hill start assist * Parking assist Parktronic * Adaptive brake light * Driver airbag * Immobilizer Technology 2.1 L CDI diesel - 95 kW (129 hp) * Automatic transmission * Rear-wheel drive * BlueEfficiency with start/stop * Auxiliary battery with separation relay * Euro 5, green emissions sticker * Permissible total weight 3,500 kg * Trailer hitch optional, towing capacity 2,000 kg braked / 750 kg unbraked * Paintwork: Brilliant silver metallic * First registration 08/2014 Do you want to lease or finance? We offer attractive offers - also possible without a down payment! Please feel free to contact us. Contact: Phone: WhatsApp: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln - Germany Opening hours: Mon-Fri: 9:00 a.m. - 6:00 p.m. Sat: 9:00 a.m. - 2:00 p.m. All information on the internet is non-binding and serves only as a general description of the vehicle. Errors, typos and prior sale are reserved. The photos are AI-edited and serve only as an example to illustrate the size & equipment of the vehicle. The binding condition of the vehicle results exclusively from the purchase contract on site or through written assurances.

Condition: new, mileage: 100 km, power: 390 kW (530.25 HP), fuel type: diesel, color: white, gearing type: automatic, Year of construction: 2026, !!! This vehicle is a sample vehicle !!! Car Transporter Body MODULO 6: * Double-deck body for transporting 2 cars or 1 van/motorhome * Loading area lower deck approx. 750 x 255 cm * Lifting platform approx. 410 x 230 cm * Integrated extension in lifting platform approx. 140 cm * Winch with wireless and cable remote control * Body hot-dip galvanized Trailer: Gedpfx Ajz Sitzjg Tsuh * Air-braked BLYSS trailer for 4 cars * Tandem axle with twin tires, GVW 17,000 kg * Payload approx. 10,000 kg * Loading area approx. 830 x 255 cm * Rear section extendable by approx. 150 cm * Lifting platforms approx. 400 x 230 cm * BPW axle * ABS * Trailer with perforated flooring * Vehicles can be safely secured in any position according to DIN * Trailer hot-dip galvanized Load securing equipment also available from us: * Lashing and tensioning straps * Cargo bars * Safety vests * Transport boxes * Edge protectors * Dunnage bags * Wheel chocks * etc. Financing and leasing available We manufacture bodies of any size and type for any chassis. Tarpaulin, GRP sandwich, aluminum. Visit us at: Bodies – Complete vehicles – Trailers – Consulting – Financing Errors and prior sale excepted, no liability for printing or input errors.

Condition: used, Second-hand Weinig high-performance planer, model Hydromat 17BL, for professional woodworking. The machine has ten spindles and is suitable for industrial planing and profiling of timber. With a working width of 170 mm, a working height of 120 mm and a feed rate of 60 m/min, it is designed for high-performance continuous processing. Technical data: - Spindles: 10 - Spindle 1: Bottom / 7.5 kW / 50 mm - Spindle 2: Right / 7.5 kW / 50 mm - Spindle 3: Left / 7.5 kW / 50 mm - Spindle 4: Right / 7.5 kW / 50 mm - Spindle 5: Left / 7.5 kW / 50 mm - Spindle 6: Top / 11 kW / 50 mm - Spindle 7: Bottom / 7.5 kW / 50 mm Gjdpfx Ajz Da Dljg Tsuh - Spindle 8: Top / 7.5 kW / 50 mm - Spindle 9: Bottom / 7.5 kW / 50 mm - Spindle 10: Universal / 7.5 kW / 50 mm - Working width: 170 mm - Working height: 120 mm - Feed rate: 60 m/min - Feed motor: 15 kW - Table: Hard-chromed

Condition: ready for operation (used), Year of construction: 2019, total height: 939 mm, overall weight: 180 kg, number of axes: 3, This 3-axis Hexagon Optiv Performance 322 was manufactured in 2019. Ideal for precise measurements, this CMM machine represents a reliable solution for enhancing quality control processes. Consider the opportunity to buy this Hexagon Optiv Performance 322 CMM machine. Contact us for more information. Machine Benefits Gujdpfx Asx D H Nwsg Toh Qualitative Machine Benefits • Frequency: 50/60 hz ± 5% • Power consumption: 600 va • Noise emission: a-weighted sound pressure level Technical Machine Benefits • Vision: 300 mm (x), 200 mm (y), 200 mm (z) • Probe: 300 mm (x), 200 mm (y), 200 mm (z) • Cws: 260 mm (x), 200 mm (y), 20 0mm (z) • Vision/probe: 240 mm (x), 200 mm (y) • All sensors: 158 mm (x), 200 mm (y), 200 mm (z) • Max traverse speed: 300 mm/s (per axis), 500 mm/s (vector) • Uncertainty: iso 10360-7 (optical): ex, ey = (1. 5 + l/250) µm, exy = (1. 9 + l/250) µm, ez = (1. 9 + l/250) µm iso 10360-2 (hp-s-x1c): mpes = (1. 9 + l/250) µm, mpep = 1. 9 µm, mperhp = 2. 9 µm (t = 75 sec) • Scale resolution: 5 nm • Max load capacity on glass plate: 20 kg • Voltage: 115–230 v ± 10% Extra Information Machine still under power Dimensions Machine Depth 788 mm

Condition: used, mileage: 306,256 km, power: 345 kW (469.07 HP), first registration: 06/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Manufacturer: Volvo Model: FH 460 Vehicle Type: Semi-trailer tractor Year of Manufacture: 2023 Permissible Total Weight: 18,000 kg Axles: 2 Wheel Arrangement: 4×2 Guodpoz Shihofx Ag Tsh Cab: Long-distance cab Transmission: Automatic Engine Power: 345 kW (460 hp) Engine Displacement: 12,777 cm³ Cylinders: 6 Fuel Type: Diesel Exterior Color: Blue Mileage: approx. 306,257 km Equipment:* Long-distance cab * Automated manual transmission * Fifth wheel coupling * Aluminum fuel tank * AdBlue tank * Compressed air connections for semi-trailers * Electrical connections for semi-trailers * Perforated steel walkway behind the cab * Side tank covers * Rear fenders with mud flaps * Air conditioning with automatic control * Multifunction display * Infotainment system with touchscreen * Multifunction steering wheel * Parking brake * Exterior mirrors * Rear lighting with LED lights