Used Paper Drilling Machine for sale (65,353)

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 40 mm arm length 1.000 mm workpiece height max. 1.250 mm table-size 1.150 x 690 mm spindle taper MT 4 spindle turning speed range 40 - 1.400 U/min feed range 0,08 - 0,40 mm/min crossrail adjustment horizontal 800 mm crossrail adjustment vertical 700 mm spindle stroke 220 mm power requirement 3,5 kW voltage 380 V total power requirement 4,0 kW weight of the machine ca. 1,6 t - Serial-No.: A01/446/97 Bdjdel Ha Twopfx Akaeb - adjustable cube table 600 x 500 x 500 mm - coolant device - machine light

Condition: good (used), Drilling capacity: Ø 50 mm Spindle fitting: MT5 Spindle speeds: 18 - 2,000 rpm Spindle stroke: 400 mm Maximum horizontal arm travel: 1,250 mm Maximum spindle to floor plate distance: 1,600 mm Equipped with: - Thread-cutting device - Drilling table Bdodpfx Asy Ia Azekasb Machine weight: 4,500 kg Machine dimensions (LxWxH): 2,800 x 1,000 x 3,500 mm

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment Especially designed for stair construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drillings, such as for balusters, can be easily accomplished with the swiveling drilling unit. Motor with pole switching, two speeds Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start via convenient handle switch Equipped with Röhm two-jaw chuck, 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit can swivel 65 degrees left and right Bjdpfxsxmatno Akasdb Pneumatic adjustment of working height allows dowelling on two levels without repositioning. Desired drilling heights can be set for each drilling level via digital counter, switching between levels is pneumatic and operated from the front Cross adjustment 340 mm, infinitely variable or in 12 mm increments via indexing rail Pneumatic clamping possible at any point, operated from the front Maximum height adjustment approx. 100 mm above table height Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front 2 swiveling workpiece supports Extraction funnel Central stop + 1 side stop Fixed mitre stop Length stop as round rod Assorted drill bits Operating manual CE mark Machine was partly repainted due to paint splashes. Pneumatic hoses replaced Dimensions: approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be viewed and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: new, neu ca. 6-8 Wochen ab Auftrag Spanien 8970 € 173.12 € 30 mm MK 3 250 mm 65 - 3.060 (8) U/min 380 mm 600 mm 2060 mm 260 kg 100 mm 170 - 660 mm 1.216 mm 300 x 270 mm 600 x 380 mm ERLO(MADE IN SPAIN) Bodpewva Hpofx Akaodb FOR MANUFACTURING USE High quality geardrive machine 2 automatical feed Left-right drilling Automatic tool ejector Adjustable depth stop Table with T-slots Drill guard with micro switch Lightening equipment User manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): coolant equipment with T-slots in base plate ERB Reverse for tapping IR/RS

Condition: new, Year of construction: 2024, neu 2024 3984 prompt, Zwischenverkauf v Spanien 10090 € 193.73 € 1 32 mm MK 3 250 mm 65 - 125 - 185 - 365 - 54 U/min M24 665 mm 640 mm 2100 mm 260 kg Automatisch 0,10 - 0,20 - mm/U 100 mm 85 - 635 mm 1.170 mm 300 x 270 mm 665 x 400 mm 120 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine 3 aut. feeds Bdjdpowirzxefx Akaob left-right drilling table with t-slots depth adustable end tool ejector drill guard CE norms user manual in GERMAN Incl. following optional equipment: lighting equipment coolant equipment and machine base with T-slots (symbol photo) OPTION (PRICE ON REQUEST): reverse for tapping Time of delivery with options: approx. 8 weeks

Condition: new, Year of construction: 2024, neu 2024 3983 prompt, Zwischenverkauf v Spanien 7400 € 142.82 € 1 1 32 mm MK 3 250 mm 65 - 125 - 185 - 365 - 54 U/min 1,8 / 2,6 kW M24 600 mm 640 mm 2020 mm 260 kg 100 mm 85 - 635 mm 1.170 mm 300 x 270 mm 600 x 380 mm 120 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine manual feed left-right drilling table with t-slots depth adustable end Bdsdpfx Aewirzrskasb tool ejector drill guard CE norms user manual in GERMAN (sample photo) OPTIONS (PRICES ON REQUEST): lighting equipment coolant equipment and machine base with T-slots reverse for tapping DELIVERY TIME WITH OPTIONS APPROX. 6 WEEKS.

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 12910 € 247.87 € 40 mm MK 4 350 mm 132-194-277-319-466-666-8 U/min 2.2 kW M33 755 mm 480 mm 2280 mm 490 kg 0,1 - 0,2 - 0,3 mm/U 150 mm 80 - 880 mm 1225 mm Bdjdowiq Tmepfx Akajb 480 x 480 mm 175 mm Automatic feed with mechanical clutch Geared drive Hardened and ground high quality steel gears Speed plate and selecting levers on head front. Depth scale and adjustable depth stop Automatic tool ejector Emergency STOP push button Spindle reversing switch Electric equipment integrated on machine’s head Machined base with coolant tank Worklight MGI: Rotating and tilting table for model 40 Safety drill guard with microswitch CE mark ALTERNATIVE: VERSION BX.40MIT ELEKTROMAGNETIC CLUTCH PRICE ON REQUEST OPTIONS (PRICES ON REQUEST): Electronic speed variato with speed digital reader(VE+TAK) A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746 F) 333-1066 G) 440-1413 H) 648-2074 I) 926-2963 Depth digital reader (LBC) Manual tapping system (IR/RS) Manual tapping system for models with variator(IR/RS-VE)

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 7160 € 138.19 € 30 mm MK 3 250 mm 245 - 4000 U/min M25 400 mm 655 mm 1185 mm 280 kg 120 mm Bedewiq N Uspfx Akaodb 100 mm 85 - 635 mm 1.195 mm 300 x 270 mm 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE V-belt drive manual feed left-right drilling automatic tool ejector adjustable depth stop table with T-slots drill guard with micro switch lightening equipment user manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): Variable speed incl. digital display (VE+TAK) Tapping device (IR/RS) Coolant equipment incl. T-slots in the ground plate (ERB)

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 12570 € 241.34 € 50 mm MK 4 350 mm 93 - 152 - 204 - 298 - 44 U/min 3 kW M35 480 mm 755 mm 2265 mm 435 kg 0,1 / 0,18 / 0,24 mm/U 180 mm 150 mm Bsdewiq Hyjpfx Akaedb ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE Gear drive 3 aut. feeds sliding machine table solid drill head tiltable turntable front wheel for sensitive fine feed (sample photo) OPTIONS (PRICES ON REQUEST): lighting equipment L coolant equipment and machine base with T-slots ERB Reverse for tapping IR/RS

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien Bdsdpfx Aswiqzwjkaeb 11530 € 221.38 € 40 mm MK 4 300 mm 75 - 150 - 235 - 325 - 47 U/min 1.3 kW Stahl: M 30; Guss: M 32 600 mm 640 mm 2020 mm 305 kg 0,1 — 0,2 — 0,3 mm/U 160 mm 125 mm 420 x 400 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE geardrive machine 2 aut. feeds left-right drilling drill guard CE norms user manual in GERMAN OPTIONS (PRICES ON REQUEST): lighting equipment coolant equipment and machine base with T-slots Reverse for Tapping

Condition: new, Year of construction: 2024, neu 2024 3982 prompt, Zwischenverkauf v Spanien 10830 € 207.94 € 1 35 mm MK 4 300 mm stufenlos 100 - 2.000 U/min 3 kW bis M 27 1100 mm 600 mm 1950 mm Bdedpfxowiqvuo Akajb 360 kg 0,10 / 0,20 / 0,30 (3) mm/U 150 mm 125 mm 90-890 mm 1250 mm 480 x 480 mm ERLO (MADE IN SPAIN) FOR DEMANDING WORKSHOP USE column drilling machine with vario gear 1-stage V-belt drive with stepless variable speed with a frequency converter and digital speed display 3 automatic feeds chuck guard left-right drilling T-Slots and integrated coolant equipment in base stand integrated lighting drill guard HEIGHT ADJUSTABLE, ROTATING AND TILTING TABLE WITH T-SLOTS reverse for tapping fast and precise setting and control of the speed without switching operations and without defined levels more particularly robust parts for wear resistant operation and smooth running compact design with high performance CE norms user manual in GERMAN

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 6840 € 132.01 € 25 mm Bjdpfewiqrpjx Akajdb MK 3 250 mm 245 - 4000 U/min 0,7 / 1,3 kW kW M18 400 mm 655 mm 1900 mm 280 kg 120 mm 100 mm 85 - 635 mm 1.195 mm 300 x 270 mm 600 x 380 mm ERLO(MADE IN SPAIN) FOR MANUFACTURING USE V-belt drive manual feed left-right drilling tool ejector adjustable depth stop table with T-slots drill guard with micro switch lightening equipment user manual in English or GERMAN CE OPTIONS (PRICES ON REQUEST): Variable speed incl. digital display (VE+TAK) Tapping device (IR/RS) Coolant equipment incl. T-slots in the ground plate (ERB)

Condition: new, neu ca. 8 Wochen ab Auftragse Spanien 10930 € 209.86 € 35 mm MK 4 300 mm 132-194-277-319-466-666-8 U/min 1.5 kW M27 755 mm 480 mm 2205 mm 385 kg 125 mm 90 - 890 mm 1250 mm 400 x 420 mm 150 mm Manual feed Bsdpewiqpnefx Akaedb Geared drive Hardened and ground high quality steel gears Speed plate and selecting levers on head front Depth scale and adjustable depth stop Thermomagnetic switch Emergency STOP push button Spindle reversing switch Worklight Fixed table Safety drill guard with microswitch CE mark OPTIONS (PRICES ON REQUEST): Electronic speed variator with speed digial reader (VE+TAK) A) 66-211 B) 97-310 C) 138-443 D) 160-510 E) 233-746 F) 333-1066 G) 440-1413 H) 648-2074 I) 926-2963 Depth digital reader(LBC) Manual tapping system (IR/RS) Manual tapping system for models with variator(IR/RS-VE) Rotating and tilting table(MGI) Coolant equipment with T-slots in the base plate (ERB) ERLO BX-35 VERSION WITH ELECTROMAGNETIC CLUTCH PRICE ON REQUEST

Condition: new, Year of construction: 2025, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Bodjg U Uv Uspfx Akaedb Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Gear head can be swivelled ± 60 Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-A

Condition: used, Year of construction: 1996, functionality: fully functional, cutting width (max.): 920 mm, Equipment: safety light barrier, The following services or repairs have been carried out: - New color display - Hydraulic oil change: 02 / 2026 - Gearbox oil change: 02 / 2026 Year of manufacture: 1996 Working width: 920 mm Stack height: approx. 120 mm Air table: Yes Light barriers: Yes Bdedpfx Aksyzi N Doasb Total number of knives: 2 Documentation: Yes, copy of the operating manual Knife change device: Yes

Condition: excellent (used), Column Drilling Machine Manufacturer: WEBO Model: V 5 Morse taper: MK 3 Clamping table: 470 x 380 mm Max. installation dimension, table to spindle: 900 mm Throat depth: 300 mm Infinitely variable speed, min. 125 max. 1080 rpm 3 automatic feeds: 0.1 - 0.2 - 0.3 mm/rev Quill stroke: 170 mm 380 Volt 1.5 kW 3.5 A Accessories: Drill chuck 3-16 mm Coolant system The machine is in very good condition Bdjdpfjywhu Dsx Akasb Transport dimensions: Length 900 mm Width 700 mm Height 2260 mm Weight 630 kg

Condition: good (used), Year of construction: 2005, Offer 26119 Technical data: - Drilling capacity in steel ST 60: 30 mm - Drill spindle taper: MK 3 - Drill spindle stroke: 125 mm Bjdpfjy D Nxqjx Akaodb - Infinitely variable drill spindle speeds: 80 – 3200 rpm - Thread cutting capability via reversible rotation up to M 20 - Throat: 260 mm - Max. distance table to spindle: 825 mm - Table with 2 T-slots: 500 x 360 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 0.8 / 1.5 kW - Space requirement approx.: W 500 x H 1900 x D 950 mm - Weight approx.: 230 kg - Cross table with handwheels

Condition: good (used), Year of construction: 1997, machine/vehicle number: 21950, Offer 26030 Technical Data: - Drilling capacity in steel ST 60: 28 mm - Maximum drilling diameter in steel ST 60: 32 mm - Thread cutting attachment - Drill spindle taper: MT 3 - Drill spindle stroke: 180 mm - Infinitely variable spindle speeds - Range 1: 65 - 240 rpm - Range 2: 130 - 480 rpm - Range 3: 240 - 875 rpm - Range 4: 800 - 1750 rpm - 3 feed rates: 0.1; 0.2; 0.3 mm/rev - Throat: 290 mm - Max. distance table - spindle: 520 mm - Swivel table with 2 T-slots, 450 x 450 mm - Height adjustable via rack with hand crank Bodoy D Nipopfx Akajdb - Machine vice underneath the swivel table - Emergency stop button - Lighting - Drive: 400 V / 0.9 / 1.3 kW - Required space approx. W 660 x H 1900 x D 700 mm - Weight approx. 280 kg

Condition: used, Year of construction: 1989, bore capacity in steel (diameter) 32 mm arm length 1230 mm table surface area 1200 x 500 mm bore stroke 180 mm Bodpsy Aa H Nefx Akaodb feed - independent 0,10 - 0,15 - 0,20 - 0,30 mm turning speeds 60 - 1800 U/min taper MK 4 total power requirement 2,7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,2 x 1,8 x 2,3 m Quick radial with: - Feed - Thread cutting device

Condition: excellent (used), Metra TRL1000 Radial Drill – Power, Precision and Reliability for Your Workshop Metra TRL1000 radial drilling machine in excellent condition, ideal for those seeking a robust, precise machine ready to handle large workpieces. Perfect for mechanical workshops, steel fabrication, and maintenance departments looking to increase capacity and productivity. Main technical features: • Radial arm: 1000 mm • Column rotation: 360° • Vertical arm travel: wide adjustment for tall workpieces • Spindle stroke: long, ideal for deep drilling • Drilling capacity: suitable for steel, stainless steel, and alloys • Spindle speed: multi-range mechanical selection Bjdpjy Ib Tnjfx Akasdb • Automatic feeds: for drilling and tapping • Heavy cast-iron frame: maximum stability and rigidity • Large base: perfect for bulky components • Power supply: industrial three-phase Machine is ready to use, very quiet and stable. (Detailed photos available)

Condition: good (used), Year of construction: 2002, machine/vehicle number: 7231424, cutting width (max.): 1,150 mm, insertion depth: 1,150 mm, table height: 800 mm, stack height: 165 mm, Equipment: documentation/manual, safety light barrier, Color display Computer for 99 programs Chrome-plated central table with air jets Bdodpfx Ajyzz Dtokajb Enlarged side tables with air jets Infrared safety barrier Technical specifications: Cutting width: 1150 mm Cutting height: 165 mm Total cuts: 2,061,885 Includes documentation and accessories

Year of construction: 2026, condition: new, functionality: fully functional, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM MANUFACTURED IN 2026/ BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. Bodsgq Dl Aepfx Akasdb To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: good (used), Year of construction: 1994, functionality: fully functional, rotational speed (max.): 2,900 rpm, rotational speed (min.): 110 rpm, For sale is an Alzmetall column drill press in good used condition, as shown in the photos. Technical specifications: • Manufacturer: Alzmetall • Model: AB3-ESV • Speed: approx. 110–2,900 rpm • With tapping function • Quill stroke: approx. 180 mm • Feed rates: 0.1/0.2/0.3 mm/rev • Year of manufacture: 1994 • Weight: approx. 450 kg • Condition: Used, in working order Shipping costs via freight forwarder: approx. €190 International buyers are welcome! You will receive an invoice with VAT shown. Bdsdpfjy Aggiex Akaob Viewing/pickup is possible by appointment in 42855 Remscheid. Sale from location 42855 Remscheid, loaded free of charge. Subject to errors in technical data and prior sale.

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 35 mm throat 300 mm Bjdpfx Akswp Tdzoaodb bore stroke 150 mm thread capacity 27 M spindle taper MT 4 MK column diameter 125 mm bore spindle turning speed range 132-1852 U/min table-size 420x400 mm

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, rotational speed (max.): 4,500 rpm, controller model: Heidenhain TNC 310, TECHNICAL DETAILS X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Tool holder: SK 40 Spindle speeds: 20-4500 rpm Bdodpfxoywgtxs Akasb MACHINE DETAILS Control: Heidenhain TNC 310 Dimensions & Weight Space requirements: approx. 2.15 x 2.00 x 2.50 m Machine weight: approx. 3 t EQUIPMENT Swivelling rotary table Documentation