Used Paper Cutting Machine for sale (65,970)

Condition: excellent (used), Year of construction: 2013, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, Cutting machine CEVISA - CHP-12 MACH-ID 9404 Make: CEVISA Type: CHP-12 Year: 2013 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace Hodpfx Afjyi Txkensnh Min. Beveling angle: 22.5° Max. beveling angle: 45° Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2017, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch, can also be used as a plasma cutting machine but is without accessories Hnsdpfox Tfdbex Afnjh Manufacturer: ESAB, Flame cutting system, flame cutting machine with accessories Type: Crossbow -Cutting length: up to 3100 mm -Cutting width: up to 1525 mm Technical data: see photo datasheet -Transport dimensions: 4000/650/H410 mm -Weight: 96 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, working range: 3,050 mm, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,525 mm, travel distance Z-axis: 220 mm, positioning accuracy: 0.015 mm, input voltage: 400 V, table length: 3,050 mm, operating speed: 250 mm/s, table width: 1,525 mm, pressure: 4,137 bar, positioning speed: 15 m/min, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, table height: 840 mm, operating pressure: 4,137 bar, input current: 77 A, total height: 1,300 mm, total length: 4,210 mm, total width: 2,130 mm, water pressure: 2.8 bar, pump pressure: 4,137 bar, overall weight: 3,850 kg, working length: 3,050 mm, power: 37 kW (50.31 HP), Equipment: safety light barrier, 2017 Swiftcut Swift-Jet CNC Waterjet Cutting Machine – Under 900 Hours Use High-Precision CNC Waterjet Profile Cutter – Low Hours, Good Condition – Now Available at Used Machine Tools Ireland Ltd 🔍 Overview: We are offering this 2017 Swiftcut Swift-Jet Waterjet Cutting Machine, a top-tier solution for high-precision, cold-cutting of a wide range of materials including metal, stone, plastic, glass, and composites. With less than 900 operational hours, this machine is in very good condition and ideal for any business seeking reliable, accurate, and versatile cutting performance. 🛠️ Machine Specifications: Brand: Swiftcut Model: Swift-Jet Year of Manufacture: 2017 Technology: CNC Waterjet Profile Cutting Cutting Area: 3000 x 1500mm Hours Used: Less than 900 hours Pump Type: High-pressure waterjet pump Cutting Method: Abrasive and pure water capability Software: Swiftcut Control Software (user-friendly, intuitive interface) Table Dimensions: 3000 x 1500mm Max Sheet Size: 3050 x 1525mm (10' x 5') Max Traverse Speed: 15m.min Max Z Axis Clearance: 220mm Positional Accuracy: 0.015mm Tank Depth: 840mm Hnjdpfxswb D S Hs Afnoh Max Pressure: 60,000psi(4137bar) Continuous Pressure: 60,000psi Min. Piercing Pressure: 20,000psi Max Output Flow: 3.8l/min Max Orifice Size: 0.36mm Min Orifice Size: 0.13mm Cutting Water Infeed: 7.6l/min Water Pressure Infeed: 2.8bar Pump Voltage: 400V/77A Pump Power: 37kW/50HP Machine Voltage: 1ph/16A Water Treatment Voltage: 1ph/10A Garnet Hopper Voltage: 1ph/10A Machine Dimensions: 4210 x 2130 x 1740mm Pump Dimensions: 1850 x 920 x 1300mm Machine Weight: 2400kg(empty) Pump Weight: 1450kg 🌟 Key Features: Cold-cutting process – no heat-affected zones, preserving material integrity Precise and clean cuts on a variety of materials and thicknesses Ideal for metal fabrication, signage, engineering, prototyping, and more Compact footprint, easy installation, and low maintenance Exceptional build quality from a trusted UK manufacturer 🔧 Applications: Perfect for cutting: Mild Steel, Stainless Steel, Aluminium Brass, Copper Stone, Granite, Marble Plastic, Acrylic Glass, Rubber, Composite Materials ✅ Why Choose This Swift-Jet? Very low hours – lightly used and well maintained Excellent condition – ready to work immediately Cost-effective alternative to brand new equipment Supported by Swiftcut's strong reputation for service and performance Take advantage of this rare opportunity to own a high-spec waterjet cutting system with low hours – ideal for precision fabrication. Act quickly – this unit won’t last long! Explore Other Waterjet Options Here: Used Waterjet Cutting Machines Used waterjet cutting machine Ireland, Swiftcut Swift-Jet for sale, CNC waterjet profile cutter, low hours waterjet machine, 2017 Swift-Jet waterjet, metal and stone cutting machine, abrasive waterjet cutter, used CNC cutting machines Ireland, high-precision waterjet cutter, used fabrication equipment for sale

Condition: ready for operation (used), controller manufacturer: Siemens Sinumerik 840D, laser power: 2,400 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 1,750 mm, total length: 8,400 mm, total width: 7,800 mm, empty load weight: 22,500 kg, De machine is nog steeds functioneel en in gebruik. Uitgerust met: - 3 plaatklemmen - Sheetmaster-lossysteem - GripMaster Workpiece dimensions: 3085 x 1650 mm Type of Laser: Trumpf TLF Hnjdpjygyvqsfx Afnoh Max cuttingthickness in steel: 8 mm Loading System: yes, SheetMaster

Condition: excellent (used), Year of construction: 2020, total width: 500 mm, total length: 800 mm, total height: 500 mm, overall weight: 65 kg, sheet thickness (max.): 40 mm, Cutting machine CEVISA - CHP-12 MACH-ID 9406 Make: CEVISA Type: CHP-12 Year: 2020 Max. nominal thickness 40 mm Max. recommended thickness 20 mm Max. bevel length in several runs 18 mm Max. bevel length in single run 12 mm MIn. bevel inner diameter 100 mm   X Bevel K Bevel V Bevel Y Bevel High average cutters lifespan around 1000 M Self feed Zero maintenace Min. Beveling angle: 22.5° Max. beveling angle: 45° Hnsdpfx Afjyh U Ubjneh Min. plate thickness: 4mm Maximum sheet thickness:40mm Power: 3 HPkW Feed rate: 2600mm/min. Length: 800mm Width: 500mm Height: 500mm Weight: 65kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1998, condition: excellent (used), machine/vehicle number: 66000102, Pallet feeder, Vaculift, Vacubelt, DV Pump, MBO MPC Control, ASP 66 Shingle belt press delivery Hnjdpfxohqhgqj Afnsh Machine nr: 66000102

Condition: good (used), Thread cutting machine, pipe thread cutter -for: Pipe size max. 2 inches -Cutting jaws: 1" inch -Drive: via 3 gearboxes -Dimensions: 550/360/H240 mm Hjdpob A Iyasfx Afnsnh -Weight: 55 kg

Condition: used, Struers Type: Struers Accutom-5 Struers Accutom-5 Precision Cutting Machine Laboratory saw including accessories & cutting discs Description: Hnodpfxsyhpqgj Afnjh For sale is a Struers Accutom-5 precision cutting machine. This is a high-quality laboratory and precision saw designed for accurate sectioning of metals, ceramics, minerals, electronic components, sample materials, and workpieces with minimal deformation and excellent cut quality. Ideal for material testing, metallography, precision engineering, research, workshops, or laboratory use. The machine operates with adjustable speed, feed control, and integrated cooling, enabling precise, clean, and reproducible cuts. Extensive accessories and several original Struers cutting discs are included (see photos). Features: - Precise sectioning of materials and sample specimens - Adjustable cutting speed and feed rate - Minimal material loss due to precision cutting - Automatic or manual cutting operation - Recirculating coolant system to protect the sample and cutting disc - Adjustable cutting force (low / medium / high) - Programmable cutting modes - Very smooth operation and accurate positioning Technical Data: Device: Struers Accutom-5 Precision Cutting Machine Speed: 300 – 3000 rpm Feed: 0.005 – 3.0 mm/s Positioning speed: X/Y each 13 mm/s Cutting force: approx. 20 N / 40 N / 60 N Cutting discs: Diameter: 75 – 152 mm Max thickness: 2 mm Mounting hole: 12.7 mm Max sample size: Clamping length: up to 225 mm Cutting length: up to 30 mm (with Ø 20 mm sample) Coolant tank: approx. 4 liters Noise level: approx. 65 dB(A) Power / Electrical: Mains voltage: 220 – 240 V Frequency: 50 – 60 Hz Power input: approx. 370 W Current consumption: approx. 2.7 – 3 A Fuse: 6.3 A slow-blow Dimensions & Weight: Width: approx. 510 mm, Depth: approx. 700 mm, Height: approx. 270 mm Weight: approx. 45 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery (see photos): - Struers Accutom-5 cutting machine - Several original Struers cutting discs (Diamond / SiC / Al2O3 depending on set) - Sample holder / clamping accessories (see photos) - Documentation / manual / spare parts documents - Integrated coolant tank (Subject to changes and errors in the technical data. All information provided without liability!) We are happy to answer further questions for you by phone.

Condition: new, Year of construction: 2026, laser power: 3,000 W, travel distance X-axis: 200 mm, travel distance Y-axis: 6,500 mm, travel distance Z-axis: 300 mm, DESCRIPTION K12C Two-chuck High-speed small tube laser cutting machine The K Series high speed small tube laser cutting machine, independently developed and produced by Baison Laser, is specifically designed for the high-speed cutting of a large batch of small metal tube materials in various sizes and shapes. It reliably cuts a variety of metal tubes, including round, square, rectangular, I-beam, angle iron and special-shaped tubes, crafted from stainless steel, carbon steel, and other metals. Technical specifications Tube size range "Round tube: φ10-φ120mm
 Square tube: □10*10-□120*120mm (> R10 mm)
Channel Steel: 8#（need nesting software and specialized work-holding fixtures） 
 Angle Iron: 8#（need nesting software and specialized work-holding fixtures）" Laser Power: 3.000 W (Raycus) Max. Single Tube Weight: 80 kg Chuck Stroke: Full stroke Max. chuck speed: 180 r/min Max Speed: 100 m/min Max Acceleration: 1.5 G Max.Tube Cutting Length: 6.500 mm Tail Material: ≥60 mm X-axis: 200 mm Hnjdpfx Afjxfrlasnsh Y-axis: 6.500 mm Z-axis: 300 mm Positioning Accuracy (X/Y): ±0.03 mm/m Repeated Positioning Accuracy (X/Y): ±0.03 mm Power Data: 19.8kw/51A Power supply: 380V/50Hz/3Phases Machine Size: 9.550*1.850*2.135 mm Machine Weight: 3.250 kg (Including automatic loading frames)

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 6,000 W, travel distance X-axis: 2,030 mm, travel distance Y-axis: 4,050 mm, travel distance Z-axis: 100 mm, DESCRIPTION SH4 Fully-enclosed Fiber Laser Cutting Machine The SH Series is a Fully-enclosed Fiber Laser Cutting Machine independently developed and produced by Baison Laser, suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, titanium alloy, and galvanized aluminum-zinc. It meets various cutting needs for medium and thin sheet metals. Technical specifications Features • Electric Control for door and platform. Flexible and Efficient • Loading weight up to 1000kg • Fully Enclosed Protective Cover with CE • Equipped with thin plate clamping tool • Emergency button on remote control Processing Format & Working Range Processing Area (L×W): 4.050 x 2.030 mm X-axis Stroke: 2.030 mm Y-axis Stroke: 4.050 mm Z-axis Stroke: 100 mm Accuracy X/Y Axis Positioning Accuracy: ±0.03 mm/m X/Y Axis Repositioning Accuracy: ±0.02 mm Speed Max. Moving Speed: 120 m/min Max. Acceleration Speed: 1.5 G Hnsdpfx Aoxfq Hpefnjh Power Parameters Power Supply: 34kW/62A (380V/50Hz/3Phases) Protection Grade: IP54 Weight & Size Max Single Lifting Platform Loading: 1.000 kg Machine Size: 11.222*3.720*2.210 mm Machine Weight: 7.738 kg

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 20,000 W, Description BAISON H13 (12 meters) (20 kW) H-BEAM AND PLATES HEAVY DUTY FIBER LASER CUTTING MACHINE GANTRY TYPE WITH ±90° BEVEL HEAD This machine is also for plates, H, U profiles and different shape + inclined cutting. Technical specifications Laser Power 20.000 W (Raycus) Max. work area (L*W*H) 12.000* strait 2.000* bevel 1.200*600 mm Min. work area(W*H) 150*150 mm Max. Speed 40m/min Max Acceleration 0.4 G X-axis (straight cuts) 2.000 mm X-axis (bevel cuts) 1.200 mm Y-axis 15.000 mm Z-axis 1.000 mm Positioning Accuracy (X/Y) ±0.1 mm/m Repeated Positioning Accuracy (X/Y) ±0.1 mm Power Data 94kw / 151A Power supply 380V/50Hz/3Phases Power Protection Level IP54 Machine Size 20.741*4.373*3.576 mm Machine Weight 8.450kg (Excludes platform) ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 20 kW Special Bevel head ±90° system for cutting H-beams and plates – BOCI Controller system – FSCUT 9200-P Servo motors – VEICHI Reducer – TECHMECH High precision X/Y transmission mode with rack and rails – JT Guide rail – SHAC Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Proportional valve – AVENTICS Electronic Components – SCHNEIDER / PHOENIX Welded and heat-treated machine bed – BAISON Wireless remote controller Computer with Windows 11 interface, Internet & WIFI Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Operation, maintenance and programming manuals Voltage stabilizer & regulator unit CE mark with safety light barriers Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - our service team know from beginning how to respect service, installation and training. - for this machine the installation and training is 3 weeks. Not included in machine price. - we can offer cost also depend on end-user place and country. Hnodpfxevcb Aaj Afneh - Machines for cutting H-beams profiles and plates - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Complete CE standard Official Seller CNC Top Ten bv Coevorden Netherlands

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 3,000 W, travel distance X-axis: 1,524 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 100 mm, EC3 Single Platform Fiber Laser Cutting Machine The EC series is an economical single-platform laser cutting machine independently developed and produced by Baison Laser, suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, and brass. It meets various cutting needs for most of sheet metals. TECHNICAL SPECIFICATIONS Features • Compact and complete CE electrical panel with safety relay on the back side of the machine equipped with AC unit, protected from dust. • Operating panel with large LCD display and movable arm mount, easy to use. • Loading weight up to 1000kg • Auto-focus laser head with automatic detection • Industial components with high durability • Both sides access for dust trolleys • Emergency botton on remote control Hsdpfoxfi Irsx Afnonh Processing Format & Working Range Processing Area (L×W): 3.050 x 1.530 mm X-axis Stroke: 1.524 mm Y-axis Stroke: 3.050 mm Z-axis Stroke: 100 mm Max. loading weight: 1.000 kg Accuracy X/Y Axis Positioning Accuracy: ±0.03 mm/m X/Y Axis Repositioning Accuracy: ±0.03 mm Speed Max. Moving Speed: 100 m/min Max. Acceleration Speed: 1.0 G Power Parameters Power Supply: 12.3kW/32A (380V/50Hz/3Phases) Protection Grade: IP54 Weight & Size Machine Size: 4.530 * 2.280 * 1.310 mm Machine Weight: 2.000 kg

Condition: new, functionality: fully functional, Year of construction: 2026, DESCRIPTION SH3 Fully-enclosed Fiber Laser Cutting Machine The SH Series is a Fully-enclosed Fiber Laser Cutting Machine independently developed and produced by Baison Laser, suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, titanium alloy, and galvanized aluminum-zinc. It meets various cutting needs for medium and thin sheet metals. Technical specifications Features • Fully Enclosed Protective Cover design also on the back side of the machine according to CE; • Electric Control for door and platform with back pannel control with emergency button; Hnjdoxfrhnopfx Afnsh • Dual monitoring LCD displays (video cameras + controller); • Emergency botton on remote control; • Dual table lifting system at the same level for extra precission; • Electrical cabinet complete CE with safety relay and AC Unit; • Independent cabinet for Laser source, also with AC unit; • Glass OD4+ laser protection system with fully enclosure according to CE. • Rubber protection seals around bottom side of the machine that provides better exhaustion for the smoke inside. Processing Format & Working Range Processing Area (L×W): 3.050 x 1.530 mm X-axis Stroke: 1.530 mm Y-axis Stroke: 3.050 mm Z-axis Stroke: 100 mm Max Single Lifting Platform Loading: 800 kg Accuracy X/Y Axis Positioning Accuracy: ±0.03 mm/m X/Y Axis Repositioning Accuracy: ±0.02 mm Speed Max. Moving Speed: 120 m/min Max. Acceleration Speed: 1.5 G Power Parameters Power Supply: 380V/50Hz/3Phases Protection Grade: IP54 Weight & Size Machine Size: 8.896*2.440*2.210 mm Machine Weight: 5.800 kg

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 12,000 W, travel distance X-axis: 2,030 mm, travel distance Y-axis: 4,050 mm, travel distance Z-axis: 370 mm, DESCRIPTION ST4 High-powered Fiber Laser Cutting Machine The ST Series is a high-powered fiber laser cutting machine independently developed and produced by Baison Laser, suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, titanium alloy, and galvanized aluminum-zinc. It meets various cutting needs for medium and thick sheet metals. Technical specifications Features • Electric Control for door and platform. Flexible and Efficient • Dual monitoring LCD displays (video cameras + controller) • Loading weight up to 2.500 kgs • Fully Enclosed Protective Cover with CE • Back panel control for pallet with emergecy button • Auto-focus laser head with automatic detection • Industial components with high durability • Emergency botton on remote control Processing Format & Working Range Processing Area (L×W): 4.050 x 2.030 mm X-axis Stroke: 2.030 mm (1.7 kW motor) Y-axis Stroke: 4.050 mm (2 x 2.4 kW motors) Z-axis Stroke: 370 mm (0.75 kW motor) Max Single Lifting Platform Loading: 2.500 kg Accuracy X/Y Axis Positioning Accuracy: ±0.03 mm/m X/Y Axis Repositioning Accuracy: ±0.03 mm Speed Max. Moving Speed: 120 m/min Max. Acceleration Speed: 1.5 G Power Parameters Power Supply: 62.8kW/97A (380V/50Hz/3Phases) Protection Grade: IP54 Hedpoxfq Sxefx Afnenh Weight & Size Machine Size: 10.615*3.540*2.520 mm Machine Weight: 9.000 kg

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 3,000 W, Description BAISON G24C: (3 kW) PROFESSIONAL TUBE FIBER LASER CUTTING MACHINE WITH AUTOMATIC LOADING AND AUTOMATIC UNLOADING SYSTEM This machine is also for profile, tub and different shape. Tube size range: Round tube: φ10-φ240mm Square tube: □10*10-□220*220mm Channel Steel: 22#（need nesting software and specialized fixtures） Angle Iron: 10#（need nesting software and specialized fixtures） I-beam:22#（need nesting software and specialized fixtures） H-beam:22#（need nesting software and specialized fixtures） Max.Tube Cutting Length 6.500 mm Effective cutting diameter for round pipes Ø10 mm – Ø240 mm Effective cutting size for square pipes □10 mm – □220 mm Max. Single Tube Weight 300 kg X/Y/Z axis travel 350 / 6,500 / 500 mm Ultra-short Tail Material ≥100 mm Positioning accuracy ±0.03 mm/m Repeatability accuracy ±0.03 mm Maximum travel speed Y axis 100 m/min Universal maximum rotation speed 140 r/min Maximum acceleration 1.0G Maximum pipe feed length 6,500 mm Total electrical power of the machine 24.8kw/59A Machine size 10.151 x 3.362 x 2.400 mm Weight of the machine 4.596 kg (Including Semi-automatic loading system and automatic unloading system) Configuration: ACCESSORIES INCLUDED IN THE OFFER Laser source RAYCUS 3 kW Laser head with automatic focus – RAYTOOLS Controller system – FSCUT 3000DE-G Automatic self-centering pneumatic chucks Centralized automatic lubrication system Exhaust smoke system with centrifugal fan Servo motors – BOCHU Reducer – TECHMECH Guide rail – SHAC Proportional valve – SMC / FESTO Welded and heat-treated machine bed – BAISON Wireless remote controller High precision X/Y transmission mode with rack and rails – K.H Computer with Windows 11 interface, Internet & WIFI Industrial cooling/heating system of the laser head and laser source - Dual cooling system – HANLI Semi-automatic loading system with chain Hedpfovcbrhjx Afnonh Automatic unloading system: 3.000 mm with following motor Operation, maintenance and programming manuals Voltage stabilizer & regulator unit Safety relay Complete CE standard Assisting gases (16 bars air compressor can be also used for cutting): - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar) Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - our service team know from beginning how to respect service, installation and training. - for this machine the installation and training is 1 week. Not included in machine price. - we can offer cost also depend on end-user place and country. - Machines for cutting tubes and profiles - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame - equipped with world-famous, durable, high-quality components - Optional: Light barrier safety protection - Complete CE standard Official Seller CNC Top Ten bv Coevorden Netherlands

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 3,000 W, Description BAISON M3: (3 kW) from stock Europe. table length 3.050 mm table width 1.530 mm laser head Ray-tools autofocus laser capacity in Kw 3 Raycus total power requirement 25-30 kW We can deliver from (1 till max 6 Kw) overall dimensions 4750x2260x2100 mm weight of the machine ca. 4.550 kg Configuration: - Raycus Laser source 3 Kw (opt. other laser power) - Cypcut (full option control) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - Nesting, With leapfrog, Edge seeking, Fly cutting - 2x LCD monitor control, keyboard, control panel - central Lubrication system - video camera inside machine Cutting capacities: - normal steel 20 mm - stainless steel 12 mm - aluminum 10 mm - brass 8 mm - copper 8 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel 3050 mm - Y-axis travel 1530 mm - Z-axis travel 100 mm - Axis speed X / Y: 120 m / min - Positioning accuracy: +/- 0.03 mm/m - Repeatability accuracy +/- 0.03 mm – Acceleration max. 1,2 G Table platform 1500mm complete outside for leading: - table load 1000 kg. assisting gases: - mild steel - oxygen (0.5 - 2 bar) - stainless steel - nitrogen (5 - 16 bar) - Aluminium - compressed air or nitrogen (5 - 16 bar)   including: - Complete safety features for CE - Safety relay - Protection grade IP54 - Spare part basic supply package with nozzles and lenses - Professional software for cutting and nesting metal sheets - AC unit for electrical cabinet - Pneumatic table holders clamps for thin metal sheet, anti-vibration system Hsdpjvcbf Iofx Afnonh - Automatic door-up and table-out system - Dual temperature water cooling system Why CNC Top Ten bv - Cnc Top Ten company have over 50 year experience in CNC machines. - And we have more service and sales locations in west and east Europe - our service team know from beginning how to respect service, installation and training. - for this machine the installation and training is 1 week. Not included in machine price. - we can offer cost also depend on end-user place and country. - Machines for cutting sheets metal - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components - Light barrier for moving table, safety protection - Complete CE standard Official Seller CNC Top Ten bv Coevorden Netherlands

Condition: like new (used), Year of construction: 2019, functionality: fully functional, For Sale. Hodou Dw I Ejpfx Afnenh Ficep Tipo G25LG. Full description Is attached as a document. Year of construction: 2019 With this line, the input and output is the following length: Input: 8M Output: 8M If you want more pictures or information please contact us.

Condition: used, Year of construction: 2005, CNC portal plasma cutting machine Manufacturer: Messer Type: Omnimat L8000 Year of manufacture: 2005 CNC control: Global Control Plus Track gauge: 8,000 mm Equipment: 1 x Oxy-fuel bevel cutting unit DAF/L for weld seam preparation (bevels) 1 x Skew Rotator with Kjellberg FineFocus 800 power source 3 x Oxy-fuel torches ALFA 1 x Marking unit FineMarker Hnjdpfx Aeykruajfnjh Without table, filter, and track 16226

Condition: used, Year of construction: 2019, Waterjet cutting machine with plasma Manufacturer: TCI Cutting Model: BP-C 4020 Year of manufacture: 2019 CNC control: TCI CNC 4.0 Working area: 4x2 m Equipment: 1 cutting head KMT OEM SL-VI 50 HP 4,000 bar with high pressure pump 1 plasma cutting head with Hypertherm XPR300 power source High voltage control system TCI SRA 4.0 Abrasive transfer system Abrasive measuring system Collision protection system Water treatment unit TCI HIDROSYSTEM 2.0 Sludge removal system Hsdpsykqwtjfx Afnonh Lantek Expert 2D software with automatic nesting function

Condition: used, Year of construction: 2006, CNC Gantry Plasma Cutting Machine Manufacturer: Messer Model: Multitherm 4000 Year of manufacture: 2006 CNC control: Global Control Working area: 3 x 12 m Track gauge: 4,000 mm Hnedpfjykpd Eox Afnjh Runway length: 15 m Extraction table 1 x plasma torch with Hypertherm HPR260 1 x plasma torch with Skew Rotator Delta and Hypertherm HPR260 Without filtration system 16226

Condition: good (used), Year of construction: 2008, Machine-Details: Stock-No. 1022-E06337 Type of machine Flame-Cutting Machine Make SATO Type Satronik D4500 Year of manufacture 2011/2008 Type of control CNC Storage location Germany Country of origin Germany Delivery time Immediately Freight basis Ex site, loaded on truck Technical details: gangway length 14000 mm working width 3700 mm burner heads 6 Control CNC 802 Additional information: Used oxyfuel cutting machine with semi-automatic gas control and 6 oxyfuel torches Working width 3700 mm Track width 4500 mm Overall width 5320 mm Overall height 2100 mm Height above floor to bottom edge of torch support on track beam mounted 1300 mm, floor-mounted without beam 1000 mm Track length 16000 mm on HE 300 B beam Oxyfuel burner: 6 pieces with MS 832-250 blades Burner carriages: 6 pieces, maintenance arm mounted on round bar Burner height adjustment: 6 pieces E 260 with 260 mm stroke Maximum cutting thickness with 4 torches: 300 mm Maximum cutting thickness with 6 torches: 200 mm Feed speed: 12000 mm/min CNC 802 control with vibration-resistant flash memory Semi-automatic gas control via proportional valves 96 macros (modifiable standard shapes) Easy to learn Hnedpfeyhbfvox Afneh USB interface CNC Cut software for importing and converting DXF files 15" screen behind shatterproof, scratch-resistant glass, operable even with gloves. Note: A burner table and an extractor are not included in the scope of delivery.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 21,572 h, machine/vehicle number: A3231E0369, control type: CNC control, degree of automation: automatic, controller manufacturer: Siemens, controller model: Sinumerik 840D SL, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 12001, laser power: 12,000 W, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness stainless steel (max.): 50 mm, sheet thickness aluminum (max.): 40 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, positioning speed: 140 m/min, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, nozzle changer, safety light barrier, TRUMPF TruLaser 5030 fiber (L76), 12 kW (2022). High-spec 2D fiber laser cutting machine with 3000 x 1500 mm working area and Siemens Sinumerik control. Hnsdpjyddbrefx Afnoh Key technical data Manufacturer: TRUMPF Model/Type: TruLaser 5030 fiber (L76) Year: 2022 Working area: 3000 x 1500 mm Laser power: 12,000 W Control: Sinumerik 840D SL Max. sheet thickness: Steel 50 mm / Stainless 50 mm / Aluminium 40 mm Max. speed: 140 m/min Configuration / equipment (highlights) Box frame; longitudinal conveyor belt; gantry drive with linear direct drives Process cooler for machine and laser (water/air); work area illumination; pilot laser Spraying equipment; automatic nozzle cleaning; closed beam guidance via laser light cable (LLK); machine status light Cutting unit: protective glass with online monitoring; Dynamic Focus Control; automatic nozzle centering; adaptive lens system Functions/packages: AdjustLine, BrightLine Fiber, ControlLine, FastLine, FlyLine, FocusLine, NitroLine, PierceLine; fusion cut performance; high-speed package; copper & brass cutting packages Safety: CE marking; light barriers; enclosed protective housing; electrical rolling roof Dust extraction: compact / multi-chamber compact dust extractor (as configured) Connectivity: USB, RJ45 network; Central Link; Online Update Manager Pallet changer: automatic pallet changer in longitudinal direction Laser source: external solid-state laser TruDisk 12001 incl. Smart Beam Control Smart Nozzle Automation (nozzle changer + automatic nozzle inspection) Additional equipment: gas prefilters; wide transverse conveyor belt with tipping container (right side); cleaning brush Installation: mezzanine version (steel structure not included) Automation preparation: LiftMaster Compact preparation; LiftMaster Compact 1530 (AL34) available at additional cost Condition & availability Condition: used Available for collection: May 2026 (subject to decommissioning schedule). Viewing/cut test: by appointment (if still under power prior to removal). Commercial / logistics Ex-works (EXW). Buyer to arrange transport, machine will be decommissioned by authorised Trumpf engineers and loaded ono your transport. Export packing and documentation support can be provided if required. Enquiries Please contact for a full specification pack, serial details, hours (laser-on / control-on), service history, tooling/spares list, and video/cut sample requirements.

Condition: new, functionality: fully functional, laser power: 1,500 W, travel distance X-axis: 1,530 mm, travel distance Y-axis: 3,050 mm, travel distance Z-axis: 100 mm, This series from IMPACT is an economical, single-platform laser cutting machine. Its space-saving design makes it easy to load and unload the cutting table, which is accessible from all sides of the machine. Suitable for cutting metal sheets such as carbon steel, stainless steel, aluminum alloy, and brass. It meets various cutting needs for most sheets and is ideal for a wide range of industries. It ensures flexibility in your production, being very easy and quick to operate. We provide all the support you need to start production in a few days. TECHNICAL FEATURES: • Compact electrical cabinet, integrated into the machine construction to save space; • Large LCD operating panel and easy-to-use mobile arm support; • Remote technical troubleshooting - Equipped with internet connectivity; • Laser head with automatic focus and anti-collision functions; • Industrial components from renowned manufacturers with high reliability; • Access on both sides for dust carts; • Safety systems for operator and machine safety; • CE standard. TECHNICAL SPECIFICATIONS: Model: FM3015 Laser power: 1.5 kW (MAX source) Maximum cutting thickness (1.5 kW): STEEL: 12 mm / STAINLESS STEEL: 8 mm / AL: 4 mm Working area: 3,050*1,530 mm X/Y/Z axis travel: 1,530 / 3,050 / 100 mm Maximum load on machine table: 800 kg Positioning accuracy: ±0.03 mm Repeatability accuracy: ±0.03 mm Hnjdpfoxfiwyox Afneh Maximum speed: 80 m/min Acceleration speed: 0.8G Exhaust system: Included (with centrifugal motor fan) Laser source and head cooling system: Included Machine size (reference): 4,500*2,250*1,920 mm Total weight: 2,500 kg

Condition: ready for operation (used), controller manufacturer: Touch-L, laser power: 10,000 W, travel distance X-axis: 6,280 mm, travel distance Y-axis: 2,070 mm, total length: 17,200 mm, total width: 6,300 mm, total height: 3,360 mm, empty load weight: 21,500 kg, Gemonteerde opties: - automatische nozzlewisselaar - schroottransportband Workpiece dimensions: 6160 x 2035 mm Type of Laser: LVD Hnedpfx Afjxqh Sgonoh Hight travel Z-axis: 130 mm Travel speed: 140 m/min Max cuttingthickness in steel: 25 mm Max cuttingthickness in Inox: 30 mm Motor Power: 75 kW Shuttle table: yes

Condition: used, power: 45 kW (61.18 HP), WATER JET MACHINE INTENSIFIER PUMP JET CUT Hnodpfx Afsx U Ax Sensh 45 KW WORKING ORDER. large capacity pump that is capable of running single or multi head machines. spares package as shown