Used Panhans Euro 10 for sale (90)

Condition: good (used), Year of construction: 1993, functionality: fully functional, operating hours: 7,120 h, cutting height (max.): 100 mm, cutting width (max.): 4,500 mm, saw blade diameter: 400 mm, overall weight: 3,000 kg, cutting length (max.): 4,500 mm, cutting height with scoring (max.): 100 mm, cutting width at rip fence: 3,200 mm, main saw diameter: 400 mm, Equipment: scorer, A well-preserved machine with few working hours. It has been operated by a private customer since new. Hsdpfsvvhfhox Adboi

Condition: new, Year of construction: 2024, Panhans long hole drilling machine type: 116/10 -Drilling depth max. 145 mm -Drilling length max. 240 mm -Height adjustment 135 mm -Suction nozzle ø 100 mm -ColorRAL 7035 light greyRAL 5000 violet blue -Net weight approx. 200 kg Solid German mechanical engineering Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor Travel mechanism for greater mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via side stops left and right Drill motor output 1.3 kW/1.8 hp with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller High-precision milled raster, fixed via spring-loaded raster bolt Plug-in frame stop with index bolt for the positions: center, left, right CE-compliant Hedper Eli Tsfx Adbei GS tested Incl. additional special accessories: - Single lever operation - Handwheel with dial gauge Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1998, still well-preserved panel saw max. cutting length 3200 mm Hedpex Sdrhofx Adbji Price ex location, not dismantled, Austria, Linz area

Condition: used, Year of construction: 1997, machine/vehicle number: 3073, functionality: fully functional, input voltage: 400 V, input current: 34 A, input frequency: 50 Hz, type of input current: AC, cutting height (max.): 60 mm, cutting width (max.): 2,850 mm, saw blade diameter: 125 mm, saw blade bore: 30 mm, rotational speed (max.): 2,870 rpm, total length: 5,430 mm, total width: 5,040 mm, total height: 1,640 mm, overall weight: 3,150 kg, cutting length (max.): 3,200 mm, compressed air connection: 6 bar, feed length Y-axis: 3,200 mm, feed rate Y-axis: 40 m/min, main saw diameter: 280 mm, saw drive: 7,500 W, Equipment: scorer, Used plasterboard saw with extraction system for sale For sale is a plasterboard saw with integrated extraction system, year of manufacture 1997. The machine is used but in good condition. Details: - Year of manufacture: 1997 - Condition: Used, but good Hsdpfx Adoyfg Rloboi - Including extraction unit - Location: DE 93326 Abensberg - Inspection under power possible by appointment Important information: - Sale exclusively to commercial buyers. - Sale without any warranty. - All information provided without guarantee. If you are interested or have questions, please contact us to arrange a viewing appointment.

Condition: new, Year of construction: 2024, TECHNICAL DATA -drilling depth max. 145 mm -drilling length max. 240 mm -height adjustment 135 mm -suction port ø 100 mm -speed 1500 / 3000 rpm -ColorRAL 7035 light grayRAL 5000 violet blue -net weight approx. 200 kg Solid German machine construction Professional slot milling and precise dowel drilling Fixed table, smooth running mobile drilling motor Travelling device for more mobility Cast iron table 700 x 380 mm thick-walled and highly ribbed Smooth-running cross support with adjustable ball guides for lateral and depth adjustment Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limitation adjustable via side stops on left and right side Drilling motor power 1.3 kW/1.8 HP or 1.7 kW/2.3 HP, pole-changing, speed 1500/3000 rpm with motor brake and practical tool tray Incl. emergency stop button High-precision three-jaw drill chuck, clamping range 5 - 20 mm Dowel drilling device for hole line drilling with grid roller 16, 22, 25 and 32 mm high-precision milled grid, fixation via spring-loaded grid pin frame stop pluggable with index bolts for the positions: center, left, right Miter fence pluggable with index bolts for 45° and 22,5°workpiece fence up to 1500 mm for series machining CE-conform GS tested Hodefpa Raopfx Adbsi

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm table height 870 mm milling spindle not interchangeable 30 mm clamping height 140 mm height adjustment 140 mm suction socket 2 x ø 120 mm speed 3000 / 4500 / 6000 / 9000 rpm Colour RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Solid German machine construction Table milling machine with double-sided swivelling fixed milling spindle for swivelling range from -5° to +45.5 Operation via handwheel at the bottom of the machine stand Height and swivel adjustment via handwheels Analogue dial gauges for height and swivel adjustment 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick tensioning device Electronic speed display Push button for spindle start and stop Left and right rotation Cutter quick clamping device Finely planed cast iron table Operation easily visible and accessible at the bottom of the machine body Milling stop 215 total adjustment via handwheel incl. multiplex stop plates Machine socket Hsdpfx Aegz Sifodbsi Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa CE tested GS tested

Condition: new, Year of construction: 2023, New machine Year of construction 2023 Equipment and technical data: - Solid German machine construction - Professional slot milling and precise dowel drilling Fixed table, smooth-running mobile drill motor - Travel device for greater mobility - Cast iron table 700 x 380 mm thick-walled and highly ribbed - 2 manual eccentric clamps with solid steel columns for clamping the workpieces - Smooth-running cross support with adjustable ball guides for lateral and depth adjustment - 2-lever operation - Height adjustment via handwheel and scale, drilling depth stop via scale, drilling length limit adjustable via left and right side stops - Drill motor power 1.3/1.7 kW, pole-changing, speed 1500/3000 rpm with mechanical motor brake and practical tool tray - incl. emergency stop button - High-precision two-jaw drill chuck with protective sleeve, clamping range 1-20 mm - Dowel drilling device for drilling holes in rows with 16, 22, 25 and 32 mm raster roller high-precision milled raster, fixed via spring-loaded raster bolt - Plug-in frame stop with index bolt for the positions: center, left, right Mitre fence, plug-in with index bolt for 45° and 22.5° - Workpiece fence up to 1500 mm for series processing - CE-compliant, GS tested Hodpfx Adsw I Uzkeboi - Max. Drilling depth 145 mm - Max. Drilling length 240 mm - Height adjustment 135 mm - Clamping range 5-20 mm - Motor power 1.3 / 1.7 kW - Voltage 400 V / 50 Hz - Suction nozzle 100 mm Ø - Color RAL 7035 light grey and RAL 5000 violet blue Special equipment: - Dial gauge in the handwheel, with 0.1 mm height adjustment display instead of the scale - Single-lever operation with remote locking for longitudinal and transverse movement of the drill motor including loosening and locking of the raster bolt on the dowel drilling device, narrow workpieces can then also be processed from the side of the table - Emergency stop button with key - Safety cover over the drill chuck with electric lock New price with this equipment 12213. Shipping dimensions: 120x80x160 cm Weight: approx. 200 kg Availability: short term Storage location: Hochheim

Year of construction: 1978, condition: used, machine/vehicle number: 1010, Roll diameter 1.000 mm band saw blade length 7.100 mm, max. cutting width 960 mm, max. cutting height 620 mm, motor 5,5 kW, table size 1.450 x 1.030 mm, installation dimensions L x W x H: 1,900 x 1,160 x 3,130 mm Hjdpfx Aohzgnzodbsi Sale in "as is" condition, ex location Seevetal, without freight and packing, subject to prior sale

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Planing width: 630 mm Planing height: 3 - 300 mm Maximum cutting depth: 8 mm Table length: 1100 mm Cutterhead speed: 5000 rpm Feed motor power: 0.55 / 0.75 kW / 0.8 / 1.0 HP Extraction port Ø 160 mm, usable on left and right Feed speed: 7 + 14 m/min Main motor power: 7.5 kW / 10 HP Voltage: 400 V / 50 Hz Space requirement approx. 1070 x 1200 x 1060 mm Net weight approx. 1050 kg TECHNICAL DESCRIPTION Robust German engineering. For thickness planing with a planing width up to 630 mm and planing height from 3 to 300 mm, compact and ergonomic machine dimensions. PANHANS solid steel cutterhead Ø 125 mm with 4 Tersa reversible knives. Pendulum-mounted feed rollers. Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure smooth and secure workpiece feed. With segmented pressure bar. Electric height adjustment of the thicknessing table, tilt-resistant on 4 trapezoidal thread spindles. With finely planed thickness table. Positioning control 4.3" touchscreen. Automatic star-delta start. Mechanical motor brake. Extraction port 160 mm, usable on left and right. Machine calibrated at the factory. CE compliant GS tested Standard equipment as follows: Solid steel cutterhead with 4 Tersa reversible knives Standard quality for 630 mm planing width Rubber infeed roller Rubber outfeed roller Thickness table without table glide rollers Positioning control 4.3" touchscreen 2 feed speeds Hedpfjwxz U Hex Adboi 7 + 14 m/min Touch panel 4.3" Location: Flörsheim Availability: Immediately

Condition: excellent (used), Year of construction: 1976, machine/vehicle number: 163, functionality: fully functional, type of input current: three-phase, planing width: 420 mm, number of blades: 4, total width: 1,400 mm, total height: 1,200 mm, total length: 2,500 mm, chip removal for surfacing (max.): 12 mm, number of planer blades: 2, surfacing fence height: 1,110 mm, surfacing fence length: 180 mm, table length: 2,500 mm, The machine was externally inspected in 2007 prior to acquisition and no defects were found. Since then, it has been used in a bow workshop (archery) with very low usage compared to industrial application. Hedpewyk Rgjfx Adbei Replacement knife included. The chip removal display is not functional. Otherwise, there are no further known defects. A forklift is available on site to assist with loading. Dismantling, loading, and transport must be organized and paid for by the buyer. The machine will remain in operation until 18.07. and will be located in Plankstadt near Heidelberg until then. Afterwards, it will be located in 31863 Bisperode (Hameln-Pyrmont). If purchase is completed before 17.07., collection from Plankstadt is possible until 15.08. if required.

Condition: like new (used), Year of construction: 2024, *demonstration machine available at short notice TECHNICAL DATA planing width 630 mm planing height 3 - 300 mm chip removal max. 8 mm thicknessing table length 1100 mm blade shaft speed 5000 rpm motor power feed 0,55 kW / 0,8 PS / 0,75 kW / 1,0 PS suction nozzle Ø 160 mm left, right usable feed speed 7 + 14 m/min Color RAL 7035 light gray and RAL 5000 violet blue Net weight approx. 1050 kg Hedpfx Adjfgwqasbei TECHNICAL DESCRIPTION Solid German engineering For thickness planing for planing width up to 630 mm and planing height from 3 to 300 mm, compact and ergonomic machine dimensions Planed in the factory PANHANS solid steel cutterhead Ø 125 mm with 4 Tersa reversible knives Pendulum mounted feed rollers Segmented rubber infeed and outfeed rollers Ø 90 mm ensure smooth and safe workpiece infeed With link pressure beam Electrical height adjustment of the thicknessing table, tilt-proof on 4 trapezoidal thread spindles With finely planed thicknessing table Positioning control 4,3" touch screen Two feed speeds: 7 + 14 m/min Automatic star-delta start-up Mechanical motor brake Suction nozzle Ø 160 mm, can be used on the left or right side CE conform GS tested

Condition: excellent (used), Bandsaw PANHANS BSB630 -used- Swivelling table, APA blade guide top and bottom, Cutting height adjustment via handwheel, Hodpjymn E Hefx Adboi Operating pressure gauge ----- Technical Data ----- Wheel diameter: 630 mm, Max. cutting height: 320 mm, Max. cutting width: 600 mm, Table size: 680x780 mm, Table tilt: 20°, Blade length: 4,480 mm, Motor: 2.2 kW, Extraction ports: 2x100 mm, Dimensions: L=1,200 W=800 H=2,150 mm Quality Info: - Blade tracking / imbalance checked - Band tires renewed - Guides checked - Wheels newly mounted - New belts - Complete basic cleaning - Electrics checked - Immediately ready for operation

Condition: used, Year of construction: 2023, Used machine Year of manufacture 2023 Technical data: Sliding table length 3200 mm Cut length sliding table 3200 mm Cutting height at 90° max. 155 mm at 46° max. 105 mm Cutting width at rip fence 1250 mm Length stop on cross slide extendable up to 3500 mm Saw blade diameter max. 450 mm Saw blade diameter (retractable under table) ø 400 mm Table size cast iron table top 1200 x 655 mm Table extension plus 750 x 655 mm Table widening 1430 x 940 mm Table height / working height +/- 20 mm 900 mm Motor power 5.5 kW / 7.5 HP Main saw blade speed 3000 / 4000 / 5000 / 6000 rpm Voltage 400 V / 50 Hz Space requirement 7000 x 3500 mm Weight approx. 1150 kg Options: Motor 7.5 kW Tele-Digit length stop With central digital wireless display 0.1 mm in the low-power system for both stop flaps up to 3000 mm instead of the standard length stop Double-sided miter stop DSG A For angle cuts 0° – 90° on the aluminum double sliding table, length and angle measurement adjustable via scale; for cross cutting up to 1375 mm with length compensation for preferred angles 5°, 10°, 15°, 22.5°, 30°, 45°, 60°, 67.5°, incl. splitter wood, wall holder and an additional factor scale for easy calculation of incorrect miters for different workpiece widths Hedpjw Nacvsfx Adbji Swivel device for the cross slide Quick ergonomic pushing into the park position 2 clamping clamps for sliding table Current list price: 46254.- Availability: short-term Storage location: Flörsheim

Condition: good (used), Year of construction: 2007, Surface planer Hedpfxowkf Hke Adbji Model Panhans PA 51 Year of manufacture 2007 Planing width 510 mm Cutter block with 4 strip knives Feed table length 1180 mm Discharge table length 1180 mm Motor 4.0 kW / 400 V

Condition: used, Year of construction: 1971, Knife block Z = 2 planer knives, planing width 520 mm Hedpfxjv I Eatj Adboi Storage location: Nattheim

Condition: used, Year of construction: 1991, Table size: 1100 x 760 mm Table height: 870 mm Cutter spindle mount: MK 5 Speeds: 3000/4500/6000/9000 rpm Height adjustment: 120 mm Table opening swivel plate diameter: 450 mm Swivel range: -5° to +45° Weight: approx. 850 kg Storage location: Supplier Hodpfx Adjx It Anebsi

Condition: like new (used), functionality: fully functional, For use on milling machines with easy mounting on the machine table. Adjustable miter stop 30–150°. Sliding carriage moves smoothly on ball bearings. Hjdpfx Asymlivjdbei

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, 4 spindle speeds: 3000/4500/6000/9000 rpm. Right-/left-hand rotation Control panel on top Table extensions and pull-out table support Motor 4.7/5.7 kW Spindle diameter 30 mm Weight approx. 1000 kg With feed unit WEGOMA VS 34, 3 rollers Hjdpfxoxwxrqs Adbji Tenoning table for cross machining

Condition: excellent (used), Year of construction: 1988, Gebr. Panhans Mortising Machine Type: 116 - School Model - Dowel hole drilling unit: pitch 16, 22, 25, 32 mm Two-lever operation Mitre angle stop Drilling depth: 145 mm Mortise length: 240 mm Height adjustment stroke: 135 mm Motor power: 1.5 kW Speed: 2800 rpm 2 hold-downs: manual Extraction port: 100 mm Machine length: 1280 mm Hjdpfox Nrg Uex Adboi Machine width: 960 mm Weight: 300 kg Location: from stock 54634 Bitburg - Immediately available -

Condition: excellent (used), Year of construction: 1982, Panhans Mortising Machine Type: 116 – School Model – Two-hand operation Dowel hole drilling unit: spacing 16, 22, 25, 32 mm Drilling depth: 145 mm Mortise length: 240 mm Height adjustment stroke: 135 mm Motor power: 1.5 kW Speed: 2800 rpm Hold-down: manual Extraction port: 100 mm Hodpfx Adex Nrhrsbei Machine length: 1280 mm Machine width: 960 mm Weight: 300 kg Location: from stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1998, Still very well-preserved table milling machine with tilting spindle. Motor: 5.9 kW. Hsdpfeymkkxsx Adbsi

Condition: excellent (used), functionality: fully functional, SURFACE PLANER model PANHANS TYP 335 A second hand machine working condition : excellent CE regulation: YES security protection SUVAMATIC electric infeed table adjustment 45° tilting guide folding auxiliary guide for narrow workpieces working width mm. 510 tables length mm. 2850 n.4 knives "Tersa" motor power Hp 6,5 ( kw 4,8 ) volt. 380/50 net weight kg. 1050 Hsdpsyngp Tofx Adbji

Condition: excellent (used), Year of construction: 2009, Machine Data: Panhans S 45 All in One Year of manufacture: 2009 Cutting length: 4200 mm Cutting width (programmable pusher travel): 4200 mm Angle stop on the left Roller tracks: 9 pieces, first 3 are dual-lane Clamping grippers: 8 pieces Hedpjyhnmgjfx Adbei Air cushion tables: 4 pieces Central blower: 1 unit Technical Data: Saw blade protrusion: 70 mm, at 45°: 50 mm Saw carriage feed rate: forward 1-120 m/min, reverse constant 120 m/min Programmable pusher speed: forward 0-80 m/min, reverse 100 m/min Automatic cutting height adjustment; pressure bar height control Angle alignment device: min. alignment width 0 mm; max. alignment width full cutting length Main saw motor: 14 kW, main saw 350 mm diameter Scoring saw motor: 1.5 kW, saw 180 mm diameter Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connected load: 20 kW Total weight: 6200 kg Control: VISIOLINE with PIOS Professional V2.0.0.x Labelling package incl. label printer

Condition: reconditioned (used), Year of construction: 1987, Circular saw feed unit PANHANS Type 76 3 drive rollers (new) Roller diameter: 110 mm Front roller width: 50 mm Middle roller width: 20 mm Rear roller width: 50 mm Axle spacing: 200 mm Feed speed: 13 + 26 m/min Drive power: 0.14 kW Hodpfx Adeyg Erwebsi Max. workpiece height: 80 mm Min. workpiece length: 200 mm Extraction nozzle: 80 mm

Condition: ready for operation (used), Year of construction: 2006, operating hours: 27,750 h, overall weight: 8,100 kg, This 3-axis PANHANS POLYPAN 47 was manufactured in 2006. It features 4200 mm cutting length and width, maximum cutting heights of 72 mm at 0° and 40 mm at 47°, and a saw carriage speed up to 100 m/min. Main motor power is 13.5 kW, with a scoring unit. Weighs 8100 kg. If you are looking to get high quality sawing capabilities consider the PANHANS POLYPAN 47 machine we have for sale. Contact us for further details. • Configuration: Machine including control cabinet • Cutting length (SL): 4200 mm • Cutting width (SB): 4200 mm • Max cutting height (saw blade vertical 0°): 72 mm • Max cutting height (saw blade swiveled 47°): 40 mm • Cutting accuracy (saw blade vertical 0°): +/- 0.1 mm • Cutting accuracy (saw blade swiveled): +/- 0.2 mm • Angle accuracy (feed speed < 10 m/min): +/- 1 mm • Angle accuracy (feed speed > 10 m/min): +/- 2.5 mm • Feed speed (saw carriage forward/reverse): 0–100 m/min • Feed speed (width stop forward): 25 m/min • Feed speed (width stop reverse): 100 mm Hodpfxsx D Rtys Adbji • Axis travels (minimum plate size): X = 300 mm, Y = 100 mm • Axis travels (maximum plate size): X = 2800 mm, Y = 750 mm • Max drilling diameter: 13 mm • Max total length: 115 mm • Number of tools: 1 drilling spindle • Tool holder: Quick-release chuck DM 1-13 • Connection values • Total connection value: 21.0 kVA • Nominal current: 3x 32 A • Pneumatic connection: 8 bar (minimum 6 bar) • Air consumption: 3 liters/min per clamp • Sound pressure level (Lpa) at operator position: 86 dB(A) • Sound power level (LWA): 103 dB(A)