Used Oil Skimmer for sale (6,242)

Condition: good (used), Oil-water separation system, oil-water separator, condensate separator The cost-effective and permanently reliable solution to the problem is usually oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Number: 1 filter available -Price: per piece Iisdpfjctla Hex Am Ija -Dimensions: 460/500/H950 mm -Weight: 32 kg

Condition: good (used), Oil-water separation system, condensate separator, oil and water separator, oil separator -Manufacturer: Alarm clock, oil-water separation system oil and water separator type WO 2 -Dimensions container: Ø 470 x 740 mm Iiedpfeq Ei Dbjx Am Ioa -Total dimensions: Ø 590 x 1160 mm -Weight: 27kg

Condition: used, functionality: unexamined, Year of construction: 2004, Thermal Oil Heating System AURA Max. permissible pressure (bar): PS 10 Max. permissible temperature (°C): TS 350 Iisdpfxjw Hxgvj Am Isa Min. permissible temperature (°C): TS 25 Volume (L): V 60 Medium: Thermal oil (Diphyl) Category: III The system is available twice, price per unit Note: The machine is still installed and can be inspected on site. The buyer is responsible for dismantling and organizing transport. This is not included in the offer price.

Condition: good (used), Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Iedpfsb A Ib Hex Am Ijia Purified water meets legal requirements Regulations for sewer discharge

Condition: good (used), Oil cabinet, oil cabinet, oil pump, oil dispensing station -with counter -Extendable hose with dispensing nozzle Ijdpeb A Igvofx Am Ioia -Compressed air connection

Condition: good (used), Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Ijdpfxjb A Iy Hj Am Ieia Purified water meets legal requirements Regulations for sewer discharge -Weight: 70 kg

Condition: good (used), Emulsion splitting plant, oil-water separation system Ijdpfx Amsb A I Dvs Ioia The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge -Dimensions: 500 x 1000 mm -Weight: 50 kg

Condition: good (used), Waste oil collection container Isdpeb A Hfzofx Am Isia -Container: Ø 660 x 1250 mm -Container: tiltable -Weight: 30 kg

Condition: good (used), Waste oil collection device, mobile oil collection container -Volume: 90 l -Dimensions: 650/450/H1200 mm Iiedpfsb A Hdxsx Am Isa -Weight: 35 kg

Condition: used, Year of construction: 2018, operating hours: 6,700 h, type of input current: three-phase, suction capacity: 5,000 m³/h, negative pressure: 3,100 Pa, Oil mist extraction for workshops – Plug & Play filtration tower for extracting oil mist during the emission of cooling lubricants. IVAT Ölnebel-T5K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapors. Industrial hall ventilation and filtration: numerous manufacturing processes, especially in metalworking, generate substantial oil mist. Very often, extractor systems for coolant recovery integrated into machines are either insufficiently effective or simply not installed. Machine retooling, frequent opening of enclosures, or lack of guarding around machining heads leads to the release of oil mist into working areas, exposing personnel to harmful vapors and mists. Installing a ventilation tower significantly improves air quality at workstations and is the ideal filtration supplement for workshop halls where comprehensive oil mist separation via coolant recovery units is difficult or impossible to achieve. Features automatic air and temperature monitoring in the room. An innovative PLC control system compares input data, detects threshold exceedances in the working area and heat buildup directly under the ceiling, and automatically regulates air quality and temperature. Performance: up to 5,000 m³/h Negative pressure: up to 3,100 Pa Filtration surface: 9 m² Fan power: 3 kW Year of manufacture: 2018 Operating hours: 6,700 Iodpfxoxxh Tas Am Isia Several units of this device available.

Condition: good (used), Emulsion splitting plant, oil-water separation system The cost-effective and permanently reliable The solution to the problem is usually the oil/water- Separation for dispersed condensates. Purified water meets legal requirements Regulations for sewer discharge Ijdpjb A I Iksfx Am Ieia -Dimensions: 750/600/H950 mm -Weight: 80 kg

Condition: good (used), Oil filling station, compressed air pump for fresh oil, remote oiling apparatus, oil dispensing device, oil filling device, oil transfer pump, gear oil pump, hydraulic oil pump, centrifugal gear oil pump Isdpfx Ajb A Hzxsm Ioia -operated: pneumatically -Reel -Hose: 6 m - Manual valve with flow indicator -Number: 3x pumps with reel available Price: per piece -Weight: 60 kg/piece

Year of construction: 2010, condition: good (used), Oil/water separator, oil-water separation system Iiodob A Sgkopfx Am Isa -Dimensions: 660/260/H700 mm -Weight: 18 kg

Condition: used, Year of construction: 2008, machine/vehicle number: M301, Used CFT Oil Filling Monoblock – Comaco 6000 bph – Overview This second-hand CFT–COMACO RVAR 6/10 + TA/3 is a volumetric piston filling and press-on capping monoblock engineered for edible oil. Built in 2008 and currently in production, it is a proven asset for industrial packaging environments looking to expand or upgrade a used bottling line. We can sell it as-is (see and like) or with revamping and preventive maintenance operations to prepare the monoblock for production. Revamping & Preventive Maintenance Activities If required, the following revamping activities can be carried out to ensure reliability and readiness for production: Assembly of machine parts at KBB workshop General machine cleaning General lubrication (greasing, oil level check and possible replacement) Inspection of rubber parts (belts and gaskets) with replacement if necessary Machine start-up: check of circuit integrity and correct functioning in manual/automatic modes Verification of format change equipment availability and integrity Technical Specifications & Performance Data Filler – CFT/COMACO RVAR 6/10 (volumetric) Product: Edible oil (filling temperature 10–30 °C) Filling system: 6 volumetric dosing groups (cylinders & pistons, plug valves), out-of-neck filling; max dose 10,500 cc Nozzles: 6 + 6 + 6 patented nozzles dedicated to edible oils Accuracy: 1σ = 0.6 g Mechanical data: filler pitch 377 mm; pitch circle diameter 720 mm; max container diagonal 220 mm; max height 460 mm Construction: painted steel base fully clad in AISI 304 stainless steel; AISI 304 product hopper with convex bottom and float level control Capper – TA/3 (press-on) Iodpfx Aeyhbtgem Ieia 3 capping heads with PP320 press-on heads and positive pick (vacuum-assisted) Rated capacity: up to 6000 cph for PET press-on caps Pitch circle diameter 360 mm; machine pitch 377 mm Pick & place cap transfer; hardened steel cam for head pistons Automatic electric turret height adjustment; centralized lubrication shared with filler Two cap elevators, each with 300 L covered hopper, cleated belts, and low-level control; mobile stainless steel frames on wheels Formats, closures and indicative speeds PET: 1 L (Ø20), 2 L (Ø28), 3 L (Ø40), 5 L (Ø40), 10 L (Ø40) Tinplate: 1 L (Ø32), 3 L (Ø32), 3 L/Gallon/5 L (Ø32) Press-on caps: 31/17 (1 L PET), 38/24 (2 L PET), 51/24 (3–5–10 L PET); flex-spout common to all tinplate formats Approx. filler outputs: up to 3500 bph (1 L PET Ø20), 3000 bph (2 L PET Ø28), 2500 bph (3 L tinplate Ø32), 2500 bph (5 L PET Ø40), 2200 bph (5 L tinplate Ø32), 1100 bph (10 L PET Ø40) Advanced Automation & Control Systems Siemens PLC: SIEMENS S7 E300 with operator controls for automatic and manual modes; inverter-driven main motion with increased power to drive the capper via gears Automatic turret height adjustment (filler and capper) Micrometric volume adjustment via cam reducer; adjustable even during machine motion Volume compensation versus product temperature (automatic correction for ±2 °C delta) Per-doser volume fine correction NO CAN–NO FILL device prevents valve opening without a container

Condition: used, Year of construction: 2006, operating hours: 14,000 h, functionality: fully functional, machine/vehicle number: 85-089, overall weight: 20,000 kg, RAPESEED OIL PRESS SYSTEM A complete and automatic rapeseed oil press installation based on a Reinartz AP15 press with a 55Kw motor driven via a DANFOSS VLT 5062 frequency controller and has a capacity of 1000 Kg rapeseed - 800 Kg sunflower seeds per hour, a crude oil stirring tank of 15,000 liters with a Wangen KL30S60.00 eccentric pump as feed to an automatic AMA filter system consisting of a plate filter with 20 m2 filter surface and 2 fine filters, one with filter bag and one with filter candles up to 0.5 micron size of the impurities. The seed supply is done via a dosing screw with the possibility of heating the seed, the real entrance to the press is protected by a permanent magnet to catch iron impurities. The discharge of the rapeseed cake is done via a chain conveyor and conveyor belt. The entire installation is controlled via a SIEMENS Simatic Multi Panel touch screen control cabinet of approximately 1m wide / 2m high. This cabinet also contains a modem to forward error messages to various GSMs. The control can work in auto mode as well as in manual mode. Isdpjwl Afyefx Am Ieia In addition to these most important systems, the installation also contains the necessary additional silos for filling the main silo, which enables 24/7 operation. The entire installation was built in 2006 and has produced 14,000 hours and is now completely ready for transport. If desired, the sale of individual elements can be discussed. If further information is required, this can best be done by email and preferably in Dutch, French or English.

Condition: used, - Bongard 8.64 MG Series 4 - External dimensions: W 1440 x D 2700 x H 2600 mm - Baking chamber: W 680 x H 1900 mm - Rotating rack: 600 x 800 mm, 19 levels - Baking capacity: Up to 152 baguettes per batch - Rack rotation diameter: 1120 mm - Total baking surface: 9.1 m² - Heating capacity: 70 kW - Connection power: 0.18 kW - Maximum temperature: 280°C - Lifting mechanism: Rack with automatic lifting - Gas burner included for fast and even baking - Opticom electronic controls for precise baking parameter management - Pulsed steam injection, ideal for crispy and golden breads - Ergonomic handles and controls positioned on the right for easy operation - Fresh air intake at burner for optimal performance - Voltage: 400 V / 3-phase - Weight: 1390 kg - Serial number: 930000015837 - Year of manufacture: 2014 Bongard 8.64 Series 4 Rotary Rack Oven – Gas or Oil Fired – Used A Compact Solution for Efficient and Uniform Baking Lrjy Tdewr T Edjxugsr Discover the Bongard 8.64 Series 4 Rotary Rack Oven, an outstanding second-hand solution offering both compactness and high performance. Designed to meet the needs of demanding professionals, this oven is ideal for maximizing production efficiency while optimizing your bakery space. Iisdjwr T Edspfx Am Ija Superior Performance for Even Baking The Bongard Series 4 Oven stands out thanks to advanced technologies that ensure uniform and top-quality baking: - Soft Flow Ventilation: This technology provides gentle, uniform air circulation, perfect for baking delicate goods such as fine pastries and rolls. Thanks to even heat distribution, your creations will remain intact and achieve ideal baking results. - Efficient Steam System: Equipped with structured cast iron gutters, the oven produces high-quality steam to improve the development of your bakery goods. For greater needs, optional ESG steam units can boost steam production capacity, ensuring optimal performance. Durable and Practical Design The Bongard 8.64 Series 4 Oven is built to withstand the rigors of intensive production environments while providing excellent user comfort: - Robustness and Longevity: Fitted with a high-performance refractory stainless steel heat exchanger and a reinforced base, this oven is engineered for outstanding durability. Electric elements are rigorously selected for maximum service life. - Simplified Maintenance: The seamless stainless steel baking chamber facilitates cleaning. Features such as the raised-edged floor and retractable steam units minimize residue accumulation. The listing was translated automatically. Translation errors are possible.

Condition: used, - Dimensions: 1350x1500x2300mm - Model: Roto112-FCH - Trolley: 600x800 - Gas or oil - Year: 2011 Iiodpewtgprofx Am Isa - Voltage: 400V - Electrical power: 2kW - Heating power: 52kW

Year of construction: 2016, condition: ready for operation (used), Heating output: 1100kW, medium: heat transfer oil, oil type: Maroltherm LH, max. flow temperature: 300°C, permissible operating temperature: 300°C, permissible operating overpressure: 10bar, volume flow: 51m³/h, max. flue gas temperature: 400°C, flow monitoring (differential pressure): 0.1bar-0.36bar, cold start volume flow: 0.1bar, filling capacity: 1500l. Documentation available. On-site inspection is possible. Iiodpfewtg Hdjx Am Iea

Condition: ready for operation (used), Year of construction: 2018, An unused above-ground double-walled tank for heating oil is available. Nominal capacity: 20000l, tank diameter: 2000mm, overall length: 6860mm, weight: approx. 3750kg. The tank has not been filled and is as clean as on delivery. Documentation available. An on-site inspection is possible. Iedpfox El Absx Am Isia

Condition: ready for operation (used), Year of construction: 2022, An above-ground double-wall heating oil and diesel tank Kammerer is available. Volume: 5m³, length: 4350mm, outer diameter: 1256mm, weight: approx. 1100kg, monitoring space volume: approx. 50l, test overpressure tank/interstitial space: 2bar/0.6bar, material: S235JR, heating oil extraction fitting: Euroflex 3, length: 2150mm, max. flow rate: 150l/h, tank heating dimensions X/Y: 646mm/47mm, limit value sensor: 23 RO. Documentation available. On-site inspection is possible. Iedjyg Nucopfx Am Ioia

Condition: excellent (used), Year of construction: 2001, JUN-AIR Compressor in soundproof housing Model 2000-25M Power (PS) 16.0 bar Continuously adjustable Iisdpowpupxefx Am Isa Volume 25 liters Air dryer integrated Very well maintained Only 204 operating hours in a clean environment. Dimensions (LxWxH) in mm: 450 x 660 x 860 Swivel casters with parking brake Noise level up to 52 dB, suitable for use in noise-sensitive environments.

Year of construction: 2013, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: Model #2WN137F1-H23Z-BJMVA-21/50T, Crosshead piston compressor for small-molecule gases such as hydrogen or argon. Oil-free! Installed as a backup unit but never put into production, so it is in like-new condition. Current new price: €190,000. Inlet pressure: 5 psi = 34.5 kPa (0.345 bar gauge) Outlet pressure: 60 psi = 413 kPa (4.13 bar gauge) Flow rate: 148 scfm = 240 m³N/h Iodpfxsv Uyqmo Am Ieia Power requirement: 30 kW

Condition: good (used), Code: 0283 Iisdpfx Aeyazdijm Iea Brand: ITALPRESSE Model: 25/13 Fabricated platen for diathermic oil press Technical data: Platen dimensions: mm 2500 x 1300 Max temperature up to 120° Max working pressure: 3/5 kg/cm2 Heating medium pressure 0,5 ate Composition: Aluminium - Flat gauged steel sheet - Coil of piping for fluid circulation - Reinforcement piping - Flat gauged steel sheet - Insulating material

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: Fabr. Nr. 281007 - 0125, total width: 900 mm, total length: 1,800 mm, total height: 1,250 mm, type of input current: three-phase, volume flow: 1,150 m³/h, nominal heat output: 90 kW (122.37 HP), Equipment: type plate available, We are selling our warm air heater with room thermostat, Kroll M 100, 90 kW, year of manufacture approx. 2000, age-appropriate good condition. Fully functional. Additionally, the following pipes and bends are available for purchase at an extra charge: - 7 pcs. spiral duct, diameter 355mm, length 2000mm - 1 pc. spiral duct, diameter 355mm, length 1000mm - 2 pcs. spiral duct, diameter 180mm, length 2000mm - 1 pc. Y-piece with gasket, 45°, length 800mm Iodpjxv Akzofx Am Ieia - 6 pcs. bend with gasket, diameter 355mm, 45° - 1 pc. bend with gasket, diameter 355mm, 90° - 1 pc. reducer, diameter 560/355mm, length 550mm - 8 pcs. sleeve, diameter 355mm - 4 pcs. connector with gasket, diameter 355mm The pipes have previously been installed and riveted.

Condition: excellent (used), Hertz energy-saving boiler 50 kw Isdpfjq I Nfhjx Am Ieia