Used Numbering Work for sale (89,242)

Condition: new, Year of construction: 2024, Dingli JCPT1212AC 12m Electric Scissor Lift, Non-Terrain, 14 units available • Automatic anti-tilt system in undercarriage • Anti-crush protection • High ground clearance • Self-locking platform gate • Speed limit at maximum height • Electric steering system • Drivable at full height • Platform overload protection • Automatic brake system • Non-marking tires • Tilt indicator with alarm • Audible lowering alarm and dual LED strobe lights • Safety bar for maintenance work • Horn • Cylinder check valve • Emergency stop button • Emergency lowering system • Drive motor protection • Tie-down lugs • On-board diagnostic system • Hour meter • Proportional controls • Folding guardrails • Power supply on the platform Hodexl Nw Hjpfx Aaconu • Maintenance-free battery • Motion alarm • Integrated forklift pockets • Charging protection system • Charge indicator • Lifting and anchor points • Single-sided platform extension • 2 drive wheels • 2 steering wheels • Manual emergency brake release Capacity: 408 kg Max. number of occupants: 2 Working height: 12 m Platform floor height: 10 m Overall length: 2.48 m Overall width: 1.15 m Overall height (rails up): 2.49 m Transport height (rails down): 1.96 m Platform length: 2.27 m Platform width: 1.12 m Platform extension: 0.90 m Ground clearance (stowed): 10 cm Ground clearance (raised): 1.9 cm Wheelbase: 1.87 m Outside turning radius: 2.10 m Drive motors: 2x15VAC/0.87 kW Travel speed (stowed): 6 km/h Travel speed (raised): 0.80 km/h Integrated charger: 24V/30A Gradeability: 25% Max. working slope: 1.5°/3° Non-marking tires: 381×127 mm Errors and prior sale excepted. Internal vehicle number: R83

Condition: used, Year of construction: 2005, operating hours: 7,647 h, Telescopic boom lift, 4x4 all-wheel drive, working height 16 m Snorkelift * Model: TB-47JCU * Working height: 16.2 m * Platform height: 14.2 m * Horizontal outreach: 11.9 m * Year of manufacture: 2005 * Hour meter reading: 7,647 h * 2-section telescopic steel construction * Driven by 4-cylinder Cummins diesel engine * 2 driving speeds * Tire size: 12-16.5 * Tread depth: 10-14 mm * Wheelbase: 2,460 mm * Drive configuration: 4x4 * Overall dimensions: 8,200 x 2,450 x 2,420 mm * Weight: 6,386 kg * Basket capacity: 227 kg * Rotatable basket * Basket made of steel construction * Hydraulic jib arm: 1,500 mm * Basket dimensions (L x W x H): 2,340 x 760 x 1,100 mm * Basket and ground controls * 230 Volt generator Further information and additional photos available upon request. This description does not constitute a binding offer and may contain errors. No guarantee for the accuracy of all information provided. Hnsdpoxngzhefx Aacou Please also visit our homepage.

Condition: excellent (used), Workbench Hedpfx Aowc Nvtoaconu Brand Garant Kombi, lockable Width 1500 mm Depth 700 mm Height 850 mm Height with pegboard 1330 mm Total width with vise 940 mm Vice Leinen junior 125 Base cabinet with 5 drawers 1 x 50 mm high 1 x 90 mm high 1 x 125 mm high 1 x 165 mm high 1 x 225 mm high

Condition: used, Year of construction: 1986, RUTHMANN work platform, type: MTS 260, built in 1984, 4-way hydraulically extendable and supportable support, 3 levels hydraulically extendable, lifting height approx. 26.00 m, working height approx. 27.50 - 28.00 m, retracted height approx. 3.60 m, lateral reach approx. 24.00 m, swivel range 360 degrees, platform load capacity 250 kg, emergency lowering, double insulation against max. 1000 volts, auxiliary drive, differential lock, heated exterior mirrors, pop-up window, roof hatch, static driver's seat, height and inclination adjustable, middle seat, rotating beacon, battery isolator, leaf spring suspension, vehicle can be covered with advertising and/or labeled Hnodpfx Aevnpmdsacju Our offer is generally without a new TÜV approval. If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this object. Please contact us!

Condition: used, mileage: 86,450 km, power: 93 kW (126.44 HP), first registration: 04/2015, overall weight: 3,500 kg, fuel type: diesel, color: white, fuel: diesel, gearing type: mechanical, Equipment: air conditioning, onboard computer, Special Features - ABS, ASR - Cruise control - CD radio - Air conditioning - Mobile topometer - Parktronic (parking assistance) - 3.5t trailer coupling - Airbag - Electrically adjustable and heated exterior mirrors - Electric windows - On-board computer - Central locking with remote control - Air-suspended driver's seat by ISRI with armrest - Tow bar 3.5t Superstructure Aerial work platform LT130TB - Working height: 13 m - Lateral outreach: 7.3 m - 4 hydraulic outriggers - Basket for 1 person or max. 120 kg - Remote control for operation from the ground - 220V power socket in the basket - Engine start/stop function - Tool box - 193 operating hours - Electric emergency pump The vehicle and aerial platform are in like-new condition. Both have been regularly serviced. New TÜV and UVV test! ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. Presentation is exclusively with original photos, taken directly on our premises – guaranteeing full transparency regarding the actual vehicle condition. Our vehicles undergo thorough preparation in our own specialised workshop before sale – including mechanics, bodywork, and painting. This ensures optimal readiness for the next technical inspection. We also guarantee the authenticity of the indicated mileage. Trust is good – verification is better: On request, the vehicle can be inspected by independent testing organisations such as TÜV, DEKRA or KÜS – also via remote inspection. Our services for you: - Delivery of your vehicle to the location of your choice - Complete handling of export formalities, including export license plates - Tailored financing and leasing options - Trade-in of your current vehicle - Installation of special equipment as requested Hnedpfsxl Agbox Aacju Looking for something specific? If you do not currently find a suitable vehicle for your business in our inventory, please contact us – we are happy to assist. For technical details, further photos or a personal consultation, we are at your service at any time. All prices quoted are net prices. The contents of our website have been created with the greatest care and are regularly updated; however, they are provided for general information only and do not substitute individual consultation. Only the information contained in the purchase contract is binding. Subject to changes, errors, typing mistakes, and prior sale.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Work table AT 1880 with beechwood top Hnodpoxiu Nvjfx Aacju

Condition: new, Year of construction: 2025, JCB aerial platform Type: Scissor lift Working height: 9.9 m Model: JCB S2646E Electric Scissor Lift Year of manufacture: 2025 Hnedpfx Aaswtlg Ajceu Suitable for outdoor use: Yes Load capacity: 450 kg Max. occupants on platform: 2 persons Max. working height: 9.9 m Max. platform height: 7.9 m Total weight: 2,663 kg Errors and prior sale excepted. Internal vehicle number: 11101

Condition: used, Year of construction: 2007, operating hours: 5,186 h, Telescopic boom lift, Snorkelift, 4x4 all-wheel drive, working height 17 m Snorkelift, * Model: TB-50D7 * Working height: 17.4 m * Platform height: 15.4 m * Lateral outreach: 12.4 m * Year of manufacture: 2007 * Hour meter reading: 5186 Hedpfx Aajxngzbecsnu * 2-stage telescopic steel construction * Powered by 3-cylinder Deutz diesel engine * 2 driving speeds * Tire size: 12-16.5 * Tread depth: 12-15 mm * Wheelbase: 2400 mm * Drive configuration: 4x4 * Overall dimensions: 7550 x 2450 x 2350 mm * Weight: 6,432 kg * Basket load capacity: 227 kg * Rotating basket * Basket made of steel construction * Basket dimensions (L x W x H): 2340 x 760 x 1100 mm * Basket and ground controls Further data and additional pictures available upon request. This description does not constitute a binding offer and may contain errors. No guarantee on all specifications. Please also visit our homepage.

Condition: good (used), Year of construction: 1984, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 51510274, type of input current: three-phase, input current: 7 A, input voltage: 380 V, Equipment: documentation/manual, Machinenumber 51510274 Year of built 1984-85 Good condition, normal light-soiling Hnedjt Etitopfx Aacju Molleton dampening 2 mounting rings in NP unit NO numbering blocks included (zeiser equal to GTO, Fuji etc) Under power in our warehouse. To be delivered EXW van Rooij, loaded on your transport (LOT) Technical Data • Maximum sheet size: 381 × 520 mm • Minimum sheet size: 110 × 148 mm • Maximum printing area: 370 × 515 mm • Maximum printing speed: 10,000 iph • Minimum printing speed: 3,000 iph • Feeder capacity: 940 mm • Delivery capacity: 420 mm • Stock range: 30 up to 350 g/m² • Maximum paper thickness: 0.4 mm Printing plate dimensions: 0.15 × 521 × 420 mm Blanket dimensions: 1.9 × 524 × 480 mm • Press drive motor — power: 1.5 kW • Air pump motor — power: 1.5 kW • Electric motor delivery raising: 370 W • Inching: 120 W Machine dimensions • Length: 2,200 mm • Width: 1,185 mm • Height: 1,570 mm • Machine weight: 1,550 kg

Condition: used, ESD-Electrostatically Protected Workbench HANDKE Industrial Technology Height-adjustable worktable, workstation Single workstation E(lectro) S(tatic) D(ischarge) Table length: 1100 / 1700 mm Table depth: 600 mm Folding table length: 600 mm Working height: from 830 to 1200 mm - Volume-conductive ESD tabletop: 40 mm - Tabletop with hydraulic lifting system - Height adjustment via hydraulic pump with manual crank - Sturdy base frame made from aluminium system profile - Mobile on 4 small wheels (swivel casters) - Stable mount for monitor or rear panel sheet - 1 drawer compartment, W x D x H = 675 x 210 x 40 mm - 1 cabinet base unit, W x D x H = 160 x 580 x 560 mm Overall dimensions L x W x H: 1200 x 660 x 1560 mm Hnedpfx Aajxf Uq Secou Weight: 90 kg Very good condition, as new 2 units available Price stated per unit

Condition: used, power: 92 kW (125.09 HP), mileage: 96,726 km, overall weight: 3,500 kg, fuel type: diesel, wheelbase: 3,682 mm, first registration: 12/2016, emission class: euro5, Equipment: ABS, immobilizer system, onboard computer, Special features - Radio - Power steering - Electric windows - Electronic immobilizer - Central locking with remote control - On-board computer - Rear-view camera - Anti-lock braking system (ABS) - Traction control system (ASR) - Electric windows - 6-speed manual transmission - Diesel particulate filter - Ladder rack Bodywork Aerial work platform France Elevateur 142 TPFc - Working height: 13.8m - Lateral outreach: 7.3m - Basket load capacity up to 265kg - Remote control - Engine start / stop function - Emergency pump - Hour meter - 2 x A-type outriggers - Indicator light for transport position in the cab - Work basket (L/W/H) 1300 x 700 x 1190 mm - Slew angle 400° Hedpfxoxlqmve Aacjnu - Basket arm rotation angle 140° - One-hand joystick proportional control for hydraulic movements in work basket - 2 x 60° basket rotation electrically - Acoustic tilt warning device - Flashing lights - 230V socket in the basket - Power inverter 3600VA - Electro-hydraulic control - Plastic work basket (1000 V insulation) The Renault Master with France Elévateur 142 TPFc is the ideal solution for companies active in working at heights. The aerial platform from France Elévateur, model 142 TPFc, offers a working height up to 14 meters and a lateral reach of up to 7 meters, allowing safe and efficient access for maintenance and repair work. Thanks to the electric and hydraulic control as well as integrated current conversion, the vehicle is versatile in use. The shortened body ensures high maneuverability, ideal for use in urban areas, on construction sites, and in narrow streets. Perfect for telecommunications companies, utilities, electricians, and painting businesses. Robust, reliable, and compact – the Renault Master with aerial work platform is the perfect combination of mobility and functionality! ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles we offer are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. Presentation is only with original photos, taken directly in our premises – ensuring full transparency regarding the actual condition of the vehicle. Our vehicles undergo comprehensive preparation in our own specialist workshop before sale – including mechanics, bodywork, and painting. Thus, they are optimally prepared for the next technical inspection. We also guarantee the authenticity of the recorded mileage. Trust is good – control is better: On request, the vehicle can be inspected by independent inspection organizations such as TÜV, DEKRA, or KÜS – also by remote inspection. Our service offering for you: Delivery of your vehicle to your desired location Complete handling of export formalities, including export license plates Individual financing and leasing offers Trade-in of your current vehicle Installation of special equipment as requested Looking for something specific? If you currently do not find a suitable vehicle for your company in our inventory, please contact us – we are happy to assist you. For technical details, more photos or a personal consultation, we are always at your disposal.

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, warranty duration: 3 months, DGUV certified until: 11/2026, year of last overhaul: 2025, Turntable for seeds Fortune DT stainless steel version Shelf below for seed disc Machined mobile Connection 400V, 1 kW, 16A-CEE plug Used machine cleaned 6 months warranty Hjdpoid Enwsfx Aaconu Visit our large bakery machine center!

Condition: new, Year of construction: 2025, JCB S1932E 10x Available Type: Scissor lift Working height: 7.7 m Model: JCB S1932E Electric Scissor Lift Year of manufacture: 2025 Suitable for outdoor use: Yes Payload: 230 kg Max. number of persons on platform: 2 persons Max. working height: 7.71 m Max. platform height: 5.71 m Total weight: 1,590 kg Subject to errors and prior sale. Internal vehicle number: 11100 Hjdpewtlhgsfx Aaconu

Condition: used, Year of construction: 2008, operating hours: 4,657 h, Telescopic boom lift, 4x4 all-wheel drive, working height 16 m Snorkelift * SB-47JRTDZ * Working height: 16.2 m * Platform height: 14.2 m * Horizontal outreach: 11.9 m * Year of manufacture: 2008 * Hour meter: 4,257 hours (read) * 2-piece telescopic steel construction * Driven by 3-cylinder Deutz diesel engine * 2 driving speeds * Tyre size: 12-16.5 * Tread depth: 8-11 mm * Wheelbase: 2,460 mm * Drive formula: 4x4 * Overall dimensions: 8,200 x 2,450 x 2,420 mm Hnsdpfxsxngy De Aacou * Weight: 6,386 kg * Basket load capacity: 227 kg * Rotating basket * Steel basket construction * Hydraulic jib * Basket dimensions (L x W x H): 2,340 x 760 x 1,100 mm * Basket and ground controls Further data and additional images are available on request. This description does not constitute a binding offer and may contain errors. No guarantee for accuracy of all information given. Visit our homepage as well.

Condition: good (used), age unknown imprinting unit numbering device Hnodpfxoq D Aaxs Aacju suitable for GTO 46 4 numbering boxes, 7 digits, forward Delivery time: immediately from stock

Condition: new, Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Included in delivery are: 01x workbench frame, new Material color: anthracite total width: approx. 1.400 mm total height: approx. 900 mm total depth: approx. 600 mm 01x Worktop, new total width: approx. 1.400 mm total depth: approx. 600 mm Notes: - The workbenches are commissioned unassembled General information about the item: This item is offered for pickup only. Any additional transport or shipment of this item or a shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Hnjdpfxeh Euqls Aacju Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: used, power: 110 kW (149.56 HP), mileage: 81,168 km, overall weight: 7,000 kg, fuel type: diesel, wheelbase: 4,100 mm, color: white, first registration: 05/2019, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, central locking, differential lock, immobilizer system, onboard computer, power assisted steering, trailer coupling, Special features - new windshield Hjdpfxexlqmpj Aaconu - 3-seater - Electric windows - Cruise control - Radio - ABS / ASR - Height-adjustable steering wheel / Depth-adjustable steering wheel - electrically adjustable and heated mirrors L/R - Differential lock - Manual air conditioning - Power steering - Electronic immobilizer - Central locking with remote control - On-board computer - Tow bar - Twin tires - Rearview camera Structure France Elevateur 172 TPFcc - Working height 17.00 m - Basket floor height 15.00 m - Maximum reach 9.00 m - Slew angle 400° - Outrigger inclination 5% / 15% - Steel support system with 2 sections 2 - Internal energy guide - Electro-hydraulic control - Plastic work basket (1000 V insulation) - Control lamp for transport position in driver cab - Ground control (5 m cable) - Operating hours counter - Emergency pump - Hydraulic pump activation in driver cab - Basket arm rotation angle 140° - Acoustic tilt monitor - Rear platform with integrated underrun protection - 2 hydraulic outriggers - Engine start-stop in work basket - LED beacon lights - 230V socket in basket - 2 x 60° basket rotation - Ladder holder - Power inverter 2500VA - Work basket (L/W/H): 1300 x 780 x 1150 mm The Iveco Daily with the France Elevateur 172 TPFcc is an indispensable tool for work in telecommunications, electricity, lighting maintenance, as well as for municipal services and painting work. Thanks to the compact design of the vehicle and the precise control of the platform, this system is ideal for use in urban areas, on construction sites with limited space, and for tasks requiring high flexibility. Iveco Daily with aerial work platform 172 TPFcc – Your reliable partner for working at heights! TÜV and UVV new! Immediately available from our warehouse in Langenfeld! ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. Presentation is exclusively with original photos taken directly by us on our premises – this guarantees full transparency regarding the actual condition of the vehicle. Our vehicles undergo a comprehensive reconditioning in our own specialist workshop before sale – including mechanics, bodywork, and painting. They are thus optimally prepared for the next technical inspection. We also guarantee the authenticity of the stated mileage. Trust is good – inspection is better: On request, the vehicle can be inspected by independent testing organizations such as TÜV, DEKRA, or KÜS – also via remote inspection. Our service offer for you: Delivery of your vehicle to your desired location Complete handling of export formalities, incl. export number plates Individual financing and leasing offers Trade-in of your current vehicle Installation of special equipment upon request Looking for something specific? If you currently cannot find a suitable vehicle for your company in our inventory, please contact us – we are happy to help. For technical details, more photos, or a personal consultation, we are always at your disposal.

Condition: used, Year of construction: 2006, operating hours: 5,449 h, Telescopic Work Platform, H.A.B. T22J, 4x4 All-Wheel Drive Manufacturer: H.A.B. - Model: T22J - Working height: 22 m - Platform height: 20 m - Lateral outreach: 19.2 m - Year of manufacture: 2006 - Hour meter reading: 5,449 - 2-stage telescopic steel construction - Powered by 4-cylinder Deutz diesel engine - 2 driving speeds - Tire size: 385/65R22.5 - Tread depth: 20–22 mm - Wheelbase: 2,500 mm - Drive configuration: 4x4 Hnsdpfxoxngy Rj Aaceu - Overall dimensions: 10,450 x 2,500 x 2,550 mm - Weight: 14,200 kg - Basket load capacity: 227 kg - Rotatable basket - Basket made of steel construction - Hydraulic basket arm - Basket dimensions (L x W x H): 1,930 x 930 x 1,100 mm - Basket and ground controls Further data and additional pictures available on request. This description does not constitute a binding offer and may be subject to errors. No liability for the accuracy of all information. Please also visit our homepage.

Condition: good (used), Note: - The pictures serve to illustrate the material. - The metal crates, boxes etc. are not included in the scope of delivery. - The color of the material may vary. - The packing tables are picked unassembled; - The shelf stands are pre-assembled; - The production time is usually approx. 3-5 working days. Basic dimensions: Hjdpst A U Ncjfx Aaconu Width: approx. 1,550 mm Height: approx. 2,000 mm Depth: 600 mm The scope of delivery includes: 02x shelf uprights, used Material color: grey Frame profile: PLFB155 Profile dimensions: P 100 x 68 x 2.25 mm Upright height: 2,000 mm Upright depth: 600 mm Incl. cross and diagonal struts, base plates The uprights are pre-assembled (bolted framework) 05x Shelf beams, used Material color: orange Truss type: PNBH0488 Box profile: 80 x 50 mm clear width: 1,350 mm 10x locking pins, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x chipboard, second-hand Chipboard thickness: 38 mm Chipboard width: 1,340 mm Depth of chipboard: 600 mm Surface: coated if required (two-piece if necessary) 01x chipboard, used Thickness chipboard: 38 mm Chipboard width: 1,340 mm Depth of chipboard: 600 mm Surface: coated if required (two-piece if necessary) 08x Locking bracket, new Version: galvanized f. Crossbeam width: 50 mm 03x Round ear, used Total length: 1,350 mm Tube Ø: approx. 30 mm 02x L-bracket, second-hand Material color: orange L-profile: approx. 60 x 60 mm Material thickness: 4.00 mm Total length: selectable Drill hole Ø: approx. 13 mm Hole spacing: approx. 50 mm 08x screws, M12 16x nuts, M12 04x screws, M10 04x nuts, M10 Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, mileage: 111,211 km, power: 90 kW (122.37 HP), Technical Data ID: 01242719 Manufacturer: Renault Model: Maxity Version: 120DXI First registration: 04-2019 Power: 90 kW (122 HP) Engine displacement: 2488 cm3 Fuel type: Diesel Color: White Number of axles: 2 Suspension: Leaf springs Tyres: 195/70R15 Transmission: Manual Gross vehicle weight: 3,500 kg Hnjdsxlqlxjpfx Aacsu Mileage: 111,211 km Features - ABS - CD radio - Electric windows - On-board computer - Central locking with remote control - Cruise control - Differential lock - Phone/CB radio - Storage box - 90L fuel tank Body Aerial work platform VT-48-NE 16m 250kg - 4 x outriggers - Telescopic boom with double extension driven by hydraulic cylinders and articulated basket arm (135°) - Internal energy chain - Two-person GRP working basket 1350 x 780 x 1150 mm - Automatic basket leveling via hydraulic cylinder and parallelogram linkage on the basket arm - Overload sensor - 2 x 60° electric basket rotation - Rear platform with aluminum checker plate - Single-handed joystick proportional control for hydraulic functions in the work basket - Dual controls on the vehicle with 5m extension cable - Engine start/stop from the work basket - Support control from the driver’s cab - Flashing beacons - Emergency hand pump - Working height: 16m - Lateral outreach: 7m - Operation without running diesel engine thanks to battery - Sine wave inverter TÜV (German roadworthiness) and UVV (safety inspection) newly issued! ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. The presentation is made exclusively with original photos taken directly on our premises – ensuring full transparency regarding the actual vehicle condition. Prior to sale, our vehicles undergo comprehensive preparation in our in-house workshop – including mechanical, bodywork, and paintwork. This means they are optimally prepared for the next technical inspection. We also guarantee the accuracy of the stated mileage. Trust is good – control is better: On request, the vehicle can be inspected by independent organizations such as TÜV, DEKRA, or KÜS – also via remote inspection. Our service offering for you: Delivery of your vehicle to your desired location Complete handling of export formalities, including export license plates Individual financing and leasing offers Trade-in of your current vehicle Installation of special equipment as required Looking for something specific? If you do not currently find a suitable vehicle for your company in our inventory, please contact us – we are happy to assist you. For technical details, further photos or a personal consultation, please feel free to contact us at any time. All specified prices are net prices. The contents of our website are created with the utmost care and are updated regularly. Nevertheless, they serve for general information only and do not replace individual advice. Only the details in the purchase contract are binding. Subject to change, errors, typographical mistakes, and prior sale.

Condition: good (used), Basic dimensions: Width: approx. 3,180 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled Hnsdpfx Aeth N Sheacju ( bolted framework ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench frame 3,180 x 700 mm / 2 levels / (184.00€ incl. 19% VAT) Workbench frame 3,180 x 800 mm / 2 levels / (186.00€ incl. 19% VAT) Workbench frame 3,180 x 900 mm / 2 levels / (188.00€ incl. 19% VAT) Workbench frame 3,180 x 1,000 mm / 2 levels / (190.00€ incl. 19% VAT) Workbench frame 3,180 x 1,050 mm / 2 levels / (192.00€ incl. 19% VAT) Workbench frame 3,180 x 1,100 mm / 2 levels / (194.00€ incl. 19% VAT) Workbench frame 3,180 x 1,200 mm / 2 levels / (198.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, Basic dimensions: Width: approx. 2,500 mm Height: approx. 938 mm Depth: approx. 900 mm Technical data for the workbench: Manufacturer: Polypal Type: Stockpal The scope of delivery includes: 02x workbench stand, used Material color: anthracite Stand height: 900 mm Stand depth: 900 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( screwed framework ) 04x Workbench traverse, used Material color: orange Box profile: 120 x 50 mm clear width: 2,300 mm 08x Locking pin, second-hand Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 2,500 mm Depth chipboard: 900 mm Surface: possibly coated (two-piece if required) 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 2,280 mm Depth chipboard: 900 mm Surface: possibly coated (two-piece if required) 06x drilling screw, new Hsdpfx Astgkwmeaconu Finish: galvanized Dimensions: 6.3 x 70 mm 04x Z-bracket, used for locking / inserting chipboard galvanized surface Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench 2,500 x 600 mm / 2 levels / (221.00€ net) Workbench 2,500 x 700 mm / 2 levels / (229.00€ net) Workbench 2.500 x 800 mm / 2 levels / (238,00€ net) Workbench 2,500 x 1,000 mm / 2 levels / (254.00€ net) Workbench 2,500 x 1,050 mm / 2 levels / (259.00€ net) Workbench 2,500 x 1,100 mm / 2 levels / (263.00€ net) Workbench 2,500 x 1,200 mm / 2 levels / (271.00€ net) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, Basic dimensions: Width: approx. 3,200 mm Height: approx. 938 mm Depth: approx. 600 mm Technical data for the workbench: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted framework ) 04x Workbench traverse, used Material color: orange Truss profile: I: 120 x 50 mm clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Chipboard width: 3,200 mm Depth chipboard: 600 mm Surface: possibly coated (two-piece if required) 01x Chipboard II. Choice, used Chipboard thickness: 38 mm Hnodpfxjthfddj Aacju Chipboard width: 2,980 mm Depth chipboard: 600 mm Surface: possibly coated (two-piece if required) 06x drilling screw, new Finish: galvanized Dimensions: 6.3 x 70 mm 08x Z-bracket, used for locking / inserting chipboard Surface galvanized Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench 3,200 x 700 mm / 2 levels / (271.00€ incl. 19% VAT) Workbench 3.200 x 800 mm / 2 levels / (282,00€ incl. 19% VAT) Workbench 3.200 x 900 mm / 2 levels / (293,00€ incl. 19% VAT) Workbench 3,200 x 1,000 mm / 2 levels / (304.00€ incl. 19% VAT) Workbench 3,200 x 1,050 mm / 2 levels / (309.00€ incl. 19% VAT) Workbench 3.200 x 1.100 mm / 2 levels / (315,00€ incl. 19% VAT) Workbench 3,200 x 1,200 mm / 2 levels / (325.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Basic dimensions: Width: approx. 3,180 mm Height: approx. 900 mm Depth: approx. 600 mm Technical data for the workbench frame: Manufacturer: Dexion Type: P 90 The scope of delivery includes: 02x workbench stand, used Material color: green Stand height: 900 mm Stand depth: 600 mm Incl. cross and diagonal struts, foot plates The stands are pre-assembled ( bolted framework ) 04x Workbench traverse, used Hnsdjthi Huepfx Aaceu Material color: orange Truss profile: I: 120 x 50 mm clear width: 3,000 mm 08x locking pin, used Version: sendzimir galvanized For securing the side rails against unintentional lifting out Remark: - The pictures serve to illustrate the material. - The material color may vary. - The workbench frames are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3-5 working days. You are also welcome to purchase the workbenches from us in the following depths: Workbench frame 3,180 x 700 mm / 2 levels / (184.00€ incl. 19% VAT) Workbench frame 3,180 x 800 mm / 2 levels / (186.00€ incl. 19% VAT) Workbench frame 3,180 x 900 mm / 2 levels / (188.00€ incl. 19% VAT) Workbench frame 3,180 x 1,000 mm / 2 levels / (190.00€ incl. 19% VAT) Workbench frame 3,180 x 1,050 mm / 2 levels / (192.00€ incl. 19% VAT) Workbench frame 3,180 x 1,100 mm / 2 levels / (194.00€ incl. 19% VAT) Workbench frame 3,180 x 1,200 mm / 2 levels / (198.00€ incl. 19% VAT) Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: used, Basic dimensions: Width: approx. 2,890 mm Depth: approx. 1,100 mm Height: approx. 1,000 mm Note: - The images are for illustrative purposes only. - The color of the material may vary. Hnjdpfx Aovmpf Reacju - The workbenches are commissioned unassembled; - The workbench stands are pre-assembled; - The production time is usually approx. 3 - 5 working days. The scope of delivery includes: 02x workbench stands, used Material color: sendz. galvanized Stand height: 1,000 mm Stand depth: 1,100 mm Profile dimensions: 90 mm Incl. cross and diagonal braces, base plates The stands are pre-assembled (screwed framework) 04x workbench crossbar, used Material color: yellow Box profile: 120 x 50 mm Clear width: 2,700 mm 08x screw M10x35 08x nut Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this article is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.