Used Nail Tie for sale (7,799)

Condition: good (used), The scope of delivery includes: 01x depth bar frame, used Iajdpfxjr Dr Suj Ag Uol Material color: sendzimir galvanized Total length: approx. 1,250 mm for shelf depth: 1,200 mm Clear span: approx. 1,100 mm Cross beam support: approx. 50 mm Support bracket: L: approx. 80 x 80 mm Total width: approx. 860 mm Inner width: approx. 855 mm Material thickness: approx. 3 mm Side frame: Length: approx. 1,2450 - 1,070 mm Sloping at the front Width: approx. 200 mm Height: approx. 195 mm End stop: Width: approx. 200 mm Height approx. 195 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This is a used item, there may be scratches, dents and signs of use. This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which will be charged separately depending on the place of delivery or scope of delivery.

Condition: good (used), Year of construction: 2009, operating hours: 20,709 h, functionality: fully functional, machine/vehicle number: 106516-11, drilling depth: 1,200 mm, overall weight: 7,500 kg, For sale: A very well-equipped deep hole drilling machine from TBT, including various accessories. Isdpfxoxgnhas Ag Uoal Drilling specifications: - Spindle 1: 5–18 mm; Spindle 2: 1–4 mm - Drilling depth: approx. 1200 mm with Ø8 mm using 3 steadies - Number of spindles: 2 - Spindle drive: Spindle 1: 1 x 4 kW; Spindle 2: 1 x 1.2 kW - Spindle speed: Spindle 1: 600–6000 rpm; Spindle 2: 2000–24000 rpm - Rapid traverse: 15,000 mm/min - Saddle stroke (nominal): 1800 mm - Coolant: Deep hole drilling oil - Tank capacity: 1,100 liters - Operating voltage: 3AC 400V, 50Hz (Total connected load: 25 kW) Condition: Good, appropriate for its age Accessories: Includes drip tray and various drills On-site inspection is recommended!

Condition: reconditioned (used), Year of construction: 1999, Palletiser consisting of - Knorr packing line - Knorr automatic jogger with air removing roller - Bizerba ITS industrial sheet counting scale Knorr system for unloading and palletising counted sheet. Paper is counted by Bizerba paper scale, then straightened and smoothened by jogger with air removing roller. Paper is picked-up positively with a pincer gripper system, transported and positioned accurately onto pallet, then left standing. Iedjhfhtkspfx Ag Ujal Equipment may also be used as a performance-enhancing alternative to a paper lift for offloading your large sized guillotine.

Condition: used, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: LP-240/03, total width: 250 mm, total length: 250 mm, total height: 35 mm, overall weight: 2 kg, input voltage: 230 V, input frequency: 50 Hz, The item offered is a slightly used but as-new rotating inspection window in its original packaging. It is mounted on the inside of your machine screen and, thanks to its rotation, ensures a consistently clear view of your machining process—even with high coolant volumes. Includes: - 24V 15A power supply - HaiClear SDU electronic control unit with soft start feature - Original operating manual Please see the attached flyer for further information. If you have any questions or are interested, please feel free to contact us. Iaedpfx Aex Rvi Nog Ujl

Condition: excellent (used), For sale: a complete, professional magnetic particle testing (MT/NDT) kit from the renowned brands Tiede and Blak-Ray, used in industrial quality control, welding, rail transport, and the energy sector. The equipment is fully operational and in very good technical and visual condition—ready for immediate use. The set includes: • Tiede FSM-2 – magnetic field strength meter (Feldstärkemessgerät), measuring range ±400 A/cm, 9 V DC power supply • Blak-Ray J-221 – professional long wave ultraviolet meter for UV lamp verification in NDT applications • Field Indicator MAGNAFLUX – magnetic field indicator for quick induction checks • Measurement probe with cable • Calibration specimen and auxiliary accessories • Glass cylinder for indicator fluid • Original transport case with protective foam Applications: Iedpfx Agexl Dbtj Usal • Weld seam inspection • Shaft, axle, and machine component examination • Testing of railway, energy, and aviation parts • Quality control in industrial production

Condition: used, Year of construction: 2003, functionality: fully functional, total height: 4,000 mm, total length: 7,100 mm, total width: 8,100 mm, temperature: 80 °C, heating capacity: 116 kW (157.72 HP), Equipment: cabin, Complete wet paint installation with prep area, wet paint booth, mixing room, drying oven, and finishing zone. The installation can still be inspected in Diest. More details in the attachment or upon request. - Dimensions: LxWxH = 8,100 x 7,100 x 4,000 mm (external) and 8,000 x 7,000 x 3,950 mm (internal). - Height to underside of rail = 3,740 mm measured from floor level. Iaodpjx H Rhrefx Ag Uel - With a shared sliding door with the spray booth. - Sliding doors as oven exit door: WxH = 1,200 x 3,800 mm, equipped with 1 window, 2 panels. - Emergency door with window in side wall: WxH = 800 x 1,900 mm, self-closing with door closer and latch. The emergency door is fitted with sealing rubbers, large in diameter and highly elastic EPDM quality. - Wall type: vertical double-walled sandwich panels filled with mineral wool, thickness 55 mm. Includes lighting, ventilation unit, control panel, and a complete monorail system in front of and throughout the installation up to the finishing zone.

Condition: good (used), Included in the scope of delivery: 01x Used Z-bracket Manufacturer: Dexion Total width: approx. 100 mm Bearing surface: approx. 47 mm Short flange: approx. 27 mm Long flange: approx. 38 mm Material thickness: approx. 1.50 mm Weight per piece: approx. 0.130 kg Iasdpsxdcxhefx Ag Uol Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transport or shipping is required beyond this, additional costs will apply, which can be requested from us separately depending on the place of delivery and scope of delivery.

Year of construction: 2006, condition: excellent (used), Used Tietjen GD12 ex Atex Hammer Mill Including 200kW 1500 rpm motor (other options possible upon request) Year of manufacture: 2006 Atex compliant Including DA576 feeder Magnetic separator and air gravity separator Iaodpfew Dv Aijx Ag Usl

Condition: used, Measuring machine with manually operated measuring arm STIEFELMAYER Iaedjkdnwbopfx Ag Uol high-precision measuring and scribing plate, cast steel/grey cast iron, heavily ribbed Machine no. 22890285 Year of manufacture 1985 Length 2500 mm Width 1500 mm Thickness 350 mm Plate thickness (top) 50 mm solid material with 300 mm ribs Working height approx. 800 mm - with manually movable measuring arm, measuring range X = 1970 mm, Y = 815 mm, Z = 840 mm - with 3-axis digital display Grundig MZ 1030 - 5 height-adjustable feet Required space L x W x H 2500 x 1500 x 2500 mm Weight 3000 kg very good surface finish

Condition: ready for operation (used), Pressing force: 300 kN/30 t Tool height: 200 mm Stroke length: 0 – 300 mm Bending capacity with prism tool MW 125/240: 200 x 16 / 200 x 24 mm Bending speed: 0 – 1.3 m/min Drive motor: 380 V, 5.5 kW Weight: 800 kg Space requirement: 1250 x 820 x 1120 mm Iaedpsx Apgcjfx Ag Usl

Condition: used, Engraving press, working frame internal dimensions: 26 x 36 cm, working size: 28 x 38 cm, 4 rollers, ink tray. Machine is in good condition and available immediately. Iajdpfx Aoxy Ilreg Ujl If interested, we are happy to inform you about additional machines in our inventory. You are warmly welcome to inspect the machine at our facility by prior appointment.

Condition: good (used), Heidelberg Tiegel TP Letterpress Hot Stamping This machine is ready for hot foil stamping, die cutting, printing, creasing, perforating, and more. The machine is in very good condition. Original Heidelberg ART hot foil stamping machine with temperature control and a drilled heating plate. This machine is from the end of its production years, an incredibly rare model. This version is distinguished by its exclusive roller holders, a drawer under the machine, and a large protective cover for the wheel. Inking system. Hard platen for the pressure plate. Set of accessories and tools. Machine format: 26x38cm 600gsm grammage Iaodpfx Aox N Dwreg Usl 5000 sheets/h speed 1200kg weight 400V power supply Fully complete, includes two frames, spare parts, and instructions.

Condition: good (used), Included in the scope of delivery: 01x inserted wire mesh shelf, used Material color: hot-dip galvanized Total depth: approx. 1,045 mm (load bar orientation) Total width: approx. 1,295 mm (cross bar orientation) Load bar: TS30/1.5 Frame height: approx. 30 mm Mesh size: approx. 70 x 45 mm Bearing surface: approx. 50 mm Weight per piece: approx. 15.70 kg Internal designation: GR-138 Note: - The wire mesh panel may show signs of damage, scratches, dents, or welding spots. Currently in stock: approx. 37 pcs. Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Iajdow S Iq Topfx Ag Uel This item is offered for collection only. Should you require transport or shipment, additional costs will be incurred, which can be requested from us separately depending on the place of delivery and/or delivery volume.

Condition: ready for operation (used), length 6000 mm width 2500 mm total power requirement / kW Without PC and software Dimensions (L×W): 6000 × 2500 mm, without vacuum plate Manufactured according to DIN 876 / class II Ijdpfjud Il Sox Ag Ujal

Condition: like new (used), Year of construction: 2011, STIERLI BIEGER 300 HE / As new, maximum 5 operating hours Iajdpfx Aox Dmdueg Uol - Year of manufacture: 2011 - CE marking - Max. working pressure: 300 kN - Stroke length: 300 mm - Motor power: 4 kW - Hand switch - Foot switch - Various dies - Bending tools - Back gauge - Documentation Dimensions: LxWxH 1.5x1.2x1.3 meters / Weight 850 kg Subject to errors and input mistakes.

Condition: reconditioned (used), Sorting machine overhauled and ready for operation the price is depending on condition and equipment, software and hardware status 2008 - 2014 they like to come with material for trial sorting. the machines are for slag, shredder residue, residual fractions, cable, aluminum, Va, Ne about 12-120mm depending on the fraction 1-2 screen cuts should be made. Functionality induction and magnetizability, discharge with air approx. 3- 9 to throughput depending on material up to 40 to Iajdpfxot Rv Nas Ag Uel

Condition: ready for operation (used), functionality: fully functional, Ultrasonic Cleaner Paint Stripping Installation RAX-8 The solvent cleaning machine consists of 2 parts: 1) The ASD; a 4-tank ultrasonic cleaning and degreasing system 2) The distillation column (still); a closed boiling tank with a vapor zone above it, including condensation and cooling coils. The condensate is continuously returned to tank 1 via a water separation system, and the contaminated BEVO thinner from tank 3 is automatically pumped out. Tank contents: Tank 1: 40.5 liter immersion tank temperature: 76°C-79°C Tank 2: 75 liter immersion tank temperature: 22°C-30°C Tank 3: 40.5 liter immersion tank (vapor tank) temperature: 77°C-82°C Tank 4 empty (evaporation/cooling) temperature: ambient temperature Distillation column max 60 liters temperature: 76°C-82°C Iodpfjw Ewl Ujx Ag Ujal The machine has been professionally connected by a certified electrician.

Condition: excellent (used), Outside micrometer 275 - 300 mm Fa.Stiefelmayer Iaedpokn Enxofx Ag Usl Accessories test rod length 250 mm

Condition: good (used), The scope of delivery includes: 01x Pressed grate, used Material color: hot-dip galvanized Total depth: 995 mm (bearing bar direction) Total width: 1,190 mm (cross bar direction) bearing bar dim.: 40/2,0 mm frame height: 40 mm Mesh size: 100 x 100 mm Weight: approx. 11,44 kg | pcs. Internal designation: K Remark: - The gratings may have damages, scratches, dents, welds etc. General information about the item: This item is offered for pickup only. A beyond desired transport or a shipment of this article is associated with additional Ijdpfoncbgzex Ag Ueal additional costs, which are separately depending on the place of delivery or scope of delivery can be requested from us.

Condition: excellent (used), Year of construction: 2008, The deep hole drilling machine is in very good condition! Deep hole drilling machine type TBM 120-2000 Drilling system BTA Min. drilling diameter D 35 mm Max. solid drilling D 130 mm Max. counterboring D 170 mm Main spindle block with two-stage gearbox -Drive Ax AC motor 37 kW with brake for spindle locking 1200-1500 rpm -Drill spindle block with two-stage gearbox 50-500 rpm, 450-1200 rpm, electrically switchable. Optional rotating / stationary tool. Main spindle box (tailstock) with two-stage gear electr. switchable Tailstock with counter-rotation Optionally with or without counter-rotation Hydraulic jaw chuck. Main and drill spindle speed continuously adjustable Machine bed as welded construction Guideways in linear roller design size 65 -Drill carriage movement via ball screw, gear and servo motor 3 kW Rapid traverse max. 3000 mm/min Maximum feed rate: 1000 mm/in. Hydraulically attachable drill bushing holder 2 x attachable steady rests 2 x roller pre-centering devices D20-100 mm 2 x Boza drilling range D 8-200 mm with chip chute and suction pump Scraper conveyor Iajdpfx Agsq A S Eks Uol -1-axis CNC control PS 100 SFT for controlling and monitoring the drilling cycle Torque monitoring of the drilling spindle and feed rate in % painting: blue/gray, RAL 5015/7035

Condition: good (used), Interface, data acquisition device, test device, telemetry system, probe interface, laser measuring system Iaedpfsw S E E Iex Ag Usl -Manufacturer: Renishaw, laser measuring system from measuring machine Stiefelmayer C 100 413514 -Type: RGH22 D07S06 -Dimensions: 130/90/H45 mm -Weight: 0.2 kg

Condition: good (used), The scope of delivery includes: 08x steel panel with support angle, used Manufacturer: SSI Schaefer material color: hot-dip galvanized total depth: approx. 960 mm for frame depth: approx. 950 mm total width: approx. 300 mm total height: approx. 50/40 mm contact surface: approx. 16 mm weight | pcs.: approx. 7,650 kg 01x steel panel end termination, used Manufacturer: SSI Schäfer material color: hot-dip galvanized Ijdpfx Aoppt N Seg Usal total depth: approx. 960 mm for frame depth: approx. 950 mm total width: approx. 300 mm total height: approx. 50/40 mm weight | pcs.: approx. 7,830 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: good (used), Interface, data acquisition device, test device, telemetry system, probe interface, printed circuit board electronic module -Manufacturer: Stiefelmayer, circuit board from coordinate measuring machine Stiefelmayer C 100 413514 -Type: 413100-89 -Dimensions: 115/80/H55 mm -Weight: 0.2 kg Iedpfx Agjw S E Euo Ujal

Condition: good (used), The scope of delivery includes: 01x Locking bracket, used Material color: sendzimir galvanized Total length: approx. 1,640 mm Leg "A" approx. 39 mm (flanged) Leg "B" approx. 63 mm Support surface: approx. 60 mm Leg "C" approx. 13 mm Material thickness: approx. 1.50 mm Weight / piece: approx. 2.330 kg Iaedpforfx Hzox Ag Usl General information about the article: This item is only offered for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. depending on the place of delivery or scope of delivery.

Condition: good (used), Interface, data acquisition device, test device, telemetry system, probe interface -Manufacturer: Renishaw, Probe Interface from coordinate measuring machine Stiefelmayer C 100 413514 Isdpfjw S E Dksx Ag Usal -Type: PI 200 -Dimensions: 185/140/H90 mm -Weight: 1.5 kg