Used Multifunctional Bench for sale (5,863)

Condition: used, Table dimensions 1250 x 750 mm Iiodpfx Aexcp Nwoa Ioc

Condition: new, bore capacity in steel (diameter) 18.0 mm throat 190 mm bore stroke 80 mm morse taper 2 Kurzspindel MK turning speeds 225 - 4.300 U/min voltage 400 / 50 Hz Volt table: 300 x 240 mm column diameter 65 mm engine output 0.37 / 0.55 kW weight 110 kg Furnishing: Iodjxaay Uspfx Aa Ioic - Large spindle speed range - stepless speed adjustment - machined base plate - Electrically secured spindle protection - Main switch lockable with motor protection switch - Reversing switch for clockwise and counterclockwise rotation - Operating instructions in German

Condition: new, bore capacity in steel (diameter) 32.0 mm threading max. M 24 throat 265 mm bore stroke 150 mm morse taper 3 MK turning speeds 320 - 1820 U/min table-size 332 x 332 mm T-slots 14.0 mm column diameter 100 mm 400 x 380 mm distance spindle/base plate max. 735 mm voltage 400 V total power requirement 2.2 kW weight 246 kg range L-W-H 520 x 920 x 1380 mm Description: - robust table drilling machine with thread cutting device - very smooth running thanks to pulleys made of gray cast iron - drive: V-BELT - quality ball bearings ensure a high concentricity of the spindle - large drilling table with diagonally running T-slots - drilling table height adjustment via rack - thread cutting device - powerful and high-torque aluminum motor in accordance with IP 54 Ijdpexabxrjfx Aa Isic - standard with T-slots in the ground base plate - ergonomic handles for comfortable working - foldable drilling spindle guard - emergency stop button at the front - manual drilling depth adjustment - control cabinet - left with main switch

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 255 mm bore stroke 120 mm morse taper 3 MK Ijdsxaa Daopfx Aa Ijic turning speeds 105 - 2900 U/min table: 395 x 420 mm column diameter 100 mm threading max. M10 voltage 400 / 50 Hz V weight 140 kg range L-W-H 500 x 570 x 1100 mm Furnishing : - Keyless chuck 1 - 16 mm / B 16 - Drill chuck arbor MK 3 / B 16 - Reducing sleeve MT 3/2, MT 3/1 - Digital drilling depth display - Automatic tool ejector - Right-left rotation device - Height-adjustable protective cover

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 180 mm bore stroke 80.0 mm morse taper 2 MK turning speeds 180 - 2270 U/min table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16.0 mm column diameter 72.0 mm voltage 400 V total power requirement 1.10 kW Ijdpfx Aajxaa Tho Isic weight 57.0 kg range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Condition: excellent (used), Workbench, usable from both sides. Length: 2500 mm. Depth: 1250 mm. Worktop height: 930 mm. Height with superstructure: 1560 mm. Material: multiplex, 30 mm thick. Structural timber: 16 x 6 cm. Intermediate shelves: 25 mm MDF. Weight: 250 kg. Isdpfxexvtaas Aa Ijic

Condition: excellent (used), Equalizer: shaft width 260mm length of table 900mm 3 knife shaft Planer: planing width 250mm dimensions of the table 250 x 600mm maximum planing height 130mm feed rate 8m/min Milling machine: spindle diameter 30mm max tool diameter 90mm Saw: cutting height 80mm blade diameter 250mm Drill: Iijdjtur Epepfx Aa Ijc drill diameter 3-16mm table dimensions 210 x 360mm

Condition: excellent (used), Kübrich Kübrich test systems 48V belt starter generator - component test bench Details of the test stand: (see Fig. 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Switch cabinet (5) MP3: Control cabinet for the control system, transfer plate with main switch, I/O (6) MP2: Switch cabinet with Simotion Iiedpoumv Emjfx Aa Isc (7) MP4: Switch cabinet with DC-DC converter (8) H3: Measurement technology box (9) H4: Transfer box Intended use: The test stand is used to carry out tests on belt starter generators during development. Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current intensity: 330 A (short term, less than 1 s) Control voltage 24 V Mechanical performance data according to the data sheet of the load machine A transmission ratio of 1:2 to the test specimen shaft must be observed. Speeds: Load machine: Set-up mode: 0 - 50 1/min Automatic mode: 0 - 10 000 1/min Test specimen motor: Set-up mode: 0 - 100 1/min Automatic mode: 0 - 20 000 1/min Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm Weight: approx. 1.2 t Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, SincoTec Type: POWER FLOW 100kN / 2000Nm Sincotec Power Flow 100 kN / 2000 Nm – Servo-hydraulic Test Stand – Fully Functional Description: For sale is a Sincotec Power Flow servo-hydraulic test stand from an industrial operation. The system is ideally suited for dynamic and static testing of components and assemblies, e.g., in the automotive, mechanical engineering, or research sectors. Technical Highlights: - Max. test force: 100 kN (up to ±150 kN) - Max. torque: ±2000 Nm (up to ±4000 Nm) - Linear stroke: ±50 mm (max. ±75 mm) - Max. rotation angle: ±50° - Servo-hydraulic control - Control via Sincotec TestPilot / CoPilot software - Includes large hydraulic power unit Dimensions & Test Stand: - Test table: approx. 1.20 × 1.00 × 1.20 m (H) - Total stand height: approx. 3.30 m Hydraulic Power Unit (separate): - Height: 2085 mm - Length: 2714 mm - Width: 1820 mm Fully functional before dismantling Power Supply / Electrical (from nameplates): - Single units / Motors Iiodpfxox H Ndle Aa Isc - 230 V / 50 Hz - Drain oil pump: 0.18 kW / 1.5 A - 400 V / 50 Hz (three-phase current) - Traverse: 0.25 kW / 0.79 A - Total weight: approx. 3000 kg Important note: "The table shown in the photos is not included in the scope of delivery." Condition: used Delivery includes: (see photos) (Specifications and details subject to change or error!) For further questions, feel free to contact us by phone.

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Iedpfxjx H Rtno Aa Ieic Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: good (used), Siga Type: GS-517-400 External dimensions LxDxH 4960 x 2500 x 2400 mm. Complete system is calibrated according to DAKKS and and therefore approved for approval-relevant tests Butane loading speed - infinitely variable from 5 g/h to 77 g/h Loading speed fuel - infinitely variable from 5 g/h to 100 g/h Fuel temperature control - infinitely variable from 20°C to 50°C Fuel quantity selectable - from 0 l to 8 l Selectable breakthrough criterion - from 1g to 10g Purge air flow temperature - Infinitely variable from 25°C to 30°C Precision scales for test piece and reference AKF - Measuring range up to 6 kg, 0.1 8 resolution Purging vacuum - Infinitely variable from 0 hPa to 30 hPa Rinsing air flow - infinitely variable from 1 l /min to 60 l/min Humidity purge air flow - infinitely variable from 10% rH to 85% rH Number of cycles from 1 to 999 (load/purge) Condition: gebraucht / used Sale ex location! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Ijdpfx Aasu Aa A As Ijic We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), EDAG EDAG Huf endurance test bench Purpose: This test bench is intended exclusively for testing parts that are capable of rotational and/or translational movement as part of an endurance test and within the limits of the following technical data. Technical data: Dimensions: width 1565 mm x depth 615 mm x height 1655 mm Weight approx. 450 kg Operating voltage 400V /50Hz Control voltage 5, 24 Provisional fuse 16 A Test device: Maximum stroke 194 mm Maximum axial force 500 N Maximum moment 5 Nm Break-out force (manually operated slide) 15 N Displacement force (manually operated slide) 10 N Other equipment Ρ4, 24" TFT monitor (1900 X 1080) Iiodovx S Apopfx Aa Isc Operating system Windows XP Measurement and control software LabVIEW 2011 PC plug-in cards 1 card, NI PCI-6251,1 card, N1 PCI-7044 Drawer 500 mm (fully extended with automatic closing) Additional load 500 N Drawer cabinet, lockable 3 drawers The teach-in endurance test bench is a device for carrying out endurance tests On test objects that can rotate and/or move translationally, e.g. cylinders Locks, door handles, key functions. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: new, turning diameter over bed 250 mm turning diameter over slide rest 130 mm turning length 550 mm turning speeds 50 - 2000 U/min centre height 125 mm spindle bore 20 mm tailstock quill taper MT 2 tailstock quill stroke 60 mm metric threading 0,4 - 3,0 mm thread - inch 10 - 44 TPI thread - module 0,2 - 12,5 mm connected load frequency 230 V total power requirement 1,0 kW weight of the machine ca. 0,12 t dimensions of the machine ca. 1,09 x 0,59 x 0,45 m Equipped with Iiedporfd Thjfx Aa Ioc - 20 mm spindle passage - adjustable guideways - Powerful 1.0 kW motor - continuously variable speed Scope of delivery: - 3-jaw chuck 100 mm, - 4-jaw faceplate chuck 125mm - standing and rotating bezel - Splash guard - Feed protection

Condition: good (used), Vise, bench vise, locksmith's vise, clamping vise, workbench vise, clamping vise, table vise -Manufacturer: Bernstein, Spannfix ball joint vise, rotatable 360°, tiltable 45° -Clamping jaws: 45 x 25 mm -Wingspan: 90 mm Iiodpfxex S Rq Re Aa Ioc -Table clamp: up to 82 mm -Transport dimensions: 310/10/110 mm -Weight: 1.4 kg

Condition: good (used), bench vice, metalworker's vice, parallel vice Iijdpfxjddfh Es Aa Isc -Jaw width: 150 mm -Wingspan: 200 mm -Number: 2x vices available -Price: per piece -Dimensions: 490/340/H195 mm -Weight: 27 kg

Year of construction: 1994, condition: good (used), multi-function punch, punch, hole punch, pneumatic hole punch -Article number: 296 346 -Dimensions: 800/400/H1200 mm -Weight: 170 kg Iiedpfevmq Utjx Aa Ijc

Condition: used, Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.1 kW -Speed: 1400 rpm -Grinding discs: Ø 300 x 40 mm Iodpfx Ajcwl A Ija Isic -Operating voltage: 380 volts -Dimensions: 690/500/H1260 mm -Weight: 148 kg

Condition: used, Double bench grinder, double grinder, bench grinder, bench grinder Iisdpfjpix N Isx Aa Iec -Manufacturer: Rema, double bench grinder type DS 12/200 -Grinding discs: max. Ø 200 x 32 x 51 mm -Motor power: 0.9 kW -Speed: 2900 rpm -Operating voltage: 220/380 volts -Dimensions: 550/410/H1070 mm -Weight: 72 kg

Condition: used, Double bench grinder, bench grinder, column grinder, column grinder Iodpfx Aasc Ibywo Ijic -Motor power: 3.3 kW -Speed: 1400 rpm -Grinding disks: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 800/1120/H1540 mm -Weight: 434 kg

Condition: good (used), Vise, bench vise, locksmith vise, parallel vise, heavy-duty vise Iedpfx Aokvrpwoa Isic -Parallel vise: jaw width 150 x 30 mm -Wingspan: 190 mm -Quantity: 1 available -Dimensions: 485/210/H190 mm -Weight: 26 kg

Condition: good (used), Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.1 kW -Speed: 1400 rpm -Max. Grinding wheels: Ø 300 x 32 mm Iedpfjd Tih Sjx Aa Ioic -Operating voltage: 380 volts -Dimensions: 830/600/H1200 mm -Weight: 231 kg

Condition: used, Double bench grinder, double grinder, bench grinder, bench grinder -Manufacturer: ESB, double bench grinder type DS 200 -Grinding discs: max. Ø 200 x 32 x 32 mm -Motor power: 0.9 kW -Speed: 3000 rpm -Receptacle: Shaft Ø 20 x 33 mm, see photos -Operating voltage: 220/380 volts -Dimensions: 490/195/H220 mm -Weight: 15 kg Iodpepg N Stofx Aa Ieic

Year of construction: 1998, condition: used, Multifunctional punch, punch, hole punch, pneumatic hole punch Iodsb A Hq Nspfx Aa Ijic -operated: pneumatic -Year of construction: 1998 -Type: 270164-1

Condition: used, Drill press, drill press, stand drill, pillar drill -Table size: 430 x 615 mm -spindle taper: MK4 -Projection: 365 mm -Speeds: 63-800 rpm -Spindle stroke: 195 mm Iedpfx Aedyb Htja Isic -Transmission -Feed: 0.1-0.4 mm/rev -Water cooling -Dimensions: 730/1040/H2640 mm -Weight: 1026 kg

Condition: good (used), bench vice, metalworker & vice, parallel vice -Jaw width: 135 mm -Wingspan: 215 mm -Number: 3x vices available Iijdovmg Ddjpfx Aa Isc -Price: per piece -Dimensions: 440/200/H490 mm -Weight: 26 kg