Used Much Hand Saw for sale (13,942)

Condition: reconditioned (used), Year of construction: 1991, A Kaltenbach cold-cut saw is for sale. The machine has been completely disassembled and reassembled. During the overhaul, the gearbox, motor, and hydraulics were refurbished. The table was resurfaced and fitted with new bearings. The gearbox is free of play! Type: KKS 400 E Year of manufacture: 1991 Saw blade diameter: 400 mm Motor power: 1.8/2.7 kW Cutting speed: 10/20 13/26 15/30 m/min Feed rate: 0 - 1,000 mm/min Rapid traverse in/out: 1,550 mm/min Maximum workpiece size: 130 mm Workpiece size for square material: 120 mm Workpiece size for flat material: 305 x 20 mm Gsdo Ahz Dxspfx Acmokd Workpiece size for round material: 130 mm Minimum workpiece size: 10 x 10 mm Mitre angle range: 0° - 90° - 0° Dimensions (L x W x H): 1,080 x 900 x 1,760 mm Weight: 900 kg Inspection/collection in 89558 Boehmenkirch. Shipping possible upon request. Forklift available for loading.

Condition: new, Year of construction: 2026, Martin Panel Saw T 77 - New Stock Machine - Top specification - Tiltable to both sides - Equipment: T 7710/2-a Saw Unit Prex – tiltable to both sides T 7725/2-a Cutting height 205 mm T 7720/2-a Drive power 5.5 kW, stepless T 7730/4-a Table length 3.3 m T 7735/3-a Cutting width 1350 mm T 7743-a Electronically controlled parallel fence, lowerable in end position T 7755-a 3-axis scoring unit T 7757-a Scorer illumination Safe Light T 777572-a MITRE cutting system RadioCompens with continuous support Gedpfxjw D T Dke Acmokd T 7780/1-a Rear table extension 610 x 860 mm T 7792/2-a Sensor monitoring for laterally adjustable protection hood 2 x 45 degrees T 7704/2-a ConnectPad 12.9" / 13" T 7704/20-a OtterBox Defender Case T 7706/1-a ConnectApp at operator level Classic Location: ex stock 54634 Bitburg - available immediately -

Condition: used, Year of construction: 1991, Cutting length: 5300 mm Cutting height: 2100 mm Cutting depth: 80 mm Scoring unit: no Feed: manual Horizontal cut display: scale Vertical cut display: scale Saw blade diameter: 300 mm Swiveling material support: yes Saw blade speed: approx. 4000 rpm Motor power: 4 kW Machine length: 6500 mm Machine depth: 1500 mm Gsdpfxsy A Hkne Acmjkd Machine height: 2800 mm Weight: 800 kg

Condition: used, Year of construction: 1998, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction connection: 100 mm Godoy Hqdajpfx Acmokd Weight: 490 kg

Condition: used, Year of construction: 1990, Wheel diameter: 440 mm Gkodpoy Hqdmofx Acmod Throat (frame opening): 390 mm Cutting depth: 280 mm Tilting table: yes, 0 to +20° Table size: 500 mm x 450 mm Blade speed: 18 m/min Motor power: 1.5 kW / 400V Motor brake: yes / automatic Extraction connection: 2 x 100 mm Machine length: 780 mm Machine width: 585 mm Machine height: 1735 mm Weight: 190 kg

Condition: used, Year of construction: 2002, Sled length: 3000 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring blade: no Saw blade height adjustment: electric / position control Gjdpfx Ajzhm Dpjcmjkd Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut fence display: scale Crosscut fence with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2000 mm Weight: 1200 kg

Condition: used, Year of construction: 2004, Slider length: 3400 mm Cutting width at the rip fence: 1300 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Rip fence adjustment: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Rip fence display: digital display Crosscut scale display: scale Crosscut scale with miter function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 7.5 kW Dust extraction connection: 80 and 120 mm Machine length: 3600 mm Gkedpfx Aszqyxxjcmed Machine width: 2000 mm Weight: 1200 kg

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 2500 mm Cutting width at the width stop: 1200 mm Cutting width at the cross-cut fence: 2500 mm Cutting depth: 100 mm Scorer: yes Height and tilt adjustment of saw blade: handwheel Width stop adjustment: manual Saw blade angle display: Scale Cutting height display: Scale Width stop display: Scala Cutting ruler display: Scala Saw blade diameter: 300mm Speeds: 4000 rpm Gedpfx Ajtpivkscmokd Motor power / saw: 4.4 kW Motor brake: yes / automatic Tiltable cutter arbor: yes 0 - 45° Milling arbor height and tilt adjustment: handwheel Milling arbor height and tilt indicator: Scale Milling arbor: 30mm Milling arbor speed: 3000 / 6000 / 7500 / 10000 rpm Max. Tool diameter: 180 mm Motor power / cutter: 4.4kW Suction connection: 100 mm, 100 mm, 80 mm Machine length: 2500mm Machine width: 1500mm weight: 530kg

Condition: used, Year of construction: 1999, Carriage length: 3800 mm Cutting width at the width stop: 1500 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 140 mm Scoring unit: no Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: electric / position control Saw blade angle display: digital Gedpfx Acevxi Ddomjkd Cutting height display: - Width stop display: Digital Cutting ruler display: Scale Saw blade diameter: 400mm Speeds: 3 Motor power: 7,5kW Motor brake: Yes, automatic Suction connection: 80mm and 120mm Machine length: 3900mm Machine width: 2200mm weight: 1000kg

Condition: new, Year of construction: 2026, Cutting height at 90°: 170 mm Cutting length: 430 mm Horizontal mitre angle range: 45°-90°-25° Vertical mitre angle range: 60° - 90° - 30° Swivel adjustment with crank: yes Roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800 rpm Motor power: 3 kW Gsdjizkhvjpfx Acmekd Motor brake: yes Dust extraction port: 100 mm Roller conveyor length: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Condition: new, Year of construction: 2025, Cutting length: 3200 mm Cutting width at rip fence: 1250 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 125 mm Scoring unit: yes Saw blade height adjustment: electric / NC control Saw blade tilt adjustment: electric / NC control Rip fence adjustment: electric / NC control Gsdpoxzfwusfx Acmskd Saw blade angle display: digital Cutting height display: digital Rip fence display: digital Crosscut fence display: digital Saw blade diameter: 400 mm Motor output: 7 kW Motor brake: yes / automatic Extraction port: 80 mm and 120 mm Machine length: 3400 mm Machine width: 2000 mm Weight: 1025 kg

Condition: excellent (used), Catalog number: 8056 TECHNICAL DATA - max. blade diameter: 350mm - blade bore diameter: 30mm - blade guard - cutting height for a 300mm blade: 90mm Gjdpeznkz Eefx Acmskd - max. cutting width: 640mm - ability to cut at an angle in the vertical plane, by moving the arm or the blade - arm rotation: right/left - motor: 400V, 3kW - table dimensions: 1000x800mm - dust extraction port diameter: 50mm - dimensions (L/W/H): 1800x1100x1510mm - weight: 185kg ADVANTAGES – Made in Italy – DTR documentation available – Very good condition – Used saw Net price: 7500 PLN Net price: 1744 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: good (used), Code: 0516 Brand: OMS SALVARANI - ITALY Model: FC 300 R SUPER - CE Standard Cut-off saw with dust extraction base for cutting frames, wooden and aluminium profiles, joinery, furniture, fittings, Pvc, plastics and various other materials – CE Standard Technical specifications: Blade diameter mm 300 Hole 30 Revolutions per minute rpm 2800 Gkodpfx Ao Ah H Iascmsd Three-phase motor power 2,5 Hp Cutting capacity 110 x 140 mm Base with dust extraction system Overall dimensions mm 800 x 600 x 1,400 h Weight kg 80

Condition: excellent (used), Catalog number 7940 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - blade guard - hydraulic blade feed Gjdpfeztzc Dox Acmekd - cutting height: 140mm - main motor: 4.4kW - table dimensions (length/width): 570x870mm - table height from base: 750mm - roller tables: 2 pcs - infeed roller table: 1170mm - outfeed roller table: 1210mm - sliding roller width: 600mm - overall machine dimensions (without roller tables) (length/width/height): 1040x820x900mm - weight: approximately 570kg ADVANTAGES – German-made – 2 roller tables – pneumatic blade stroke – used saw, in perfect condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, Year of construction: 2000, without mounting table, roller diameter: 800 mm, stand side on the left, belt guide at the top and bottom, APA motor: 4.0 kW with motor brake and emergency stop switch, cutting speed: 1650 m/min, cutting height: 390 mm, cutting width: 780 mm, blade length: max. 5600 mm, weight: approx. 500 kg, dimensions: 1310 x 950 x 2380 mm. Location: Nattheim. Gkjdpfx As Aay Ebocmod

Condition: used, Max. saw blade diameter: 450 mm Motor power: 7.5 kW Max. cutting width: 800 mm Carriage length: 5000 mm Saw blade bore: 30 mm Control panel: located at the bottom of the machine housing Height adjustment: hydraulic, via foot lever Swivel adjustment: hydraulic, via foot lever Swivel angle indicator: scale Cutting width indicator: scale Maximum cut length on the crosscut fence: 3200 mm Crosscut fence indicator: scale Crosscut fence design: fixed 90° PSV safety guard: Yes Gsdpj Af Nu Djfx Acmekd Location: Nattheim

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Gedpfx Asz Ehvxocmskd

Condition: used, Year of construction: 2006, with automatic lifting table feeding system with 4 precision spindles, ensuring the stack is always held evenly at the correct level. Equipped with 4 powered roller groups. Lifting table dimensions: 6000 x 2200 mm. Feeding side: left (from the operator's perspective). Max. stack height: 450 mm. Lifting table height (bottom): to be defined. Speed for lifting and lowering: 0.7 m/min. Lifting table drive: 3 kW. Powered roller group: 4. STANDARD CONFIGURATION. Usable cutting length: 6000 mm. Lifting table feeding: Yes. Working height: 950 mm. Saw blade overhang: 100 mm. Clamping device opening: 117 mm. Machine control: G Drive RT. Number of clamping devices movable in X: 1. Number of clamping devices movable in X and Y: 1. Number of fixed clamping devices: 1. Min. material thickness (with side alignment): 10 mm. Min. material thickness (with lifting table feeding): 10 mm. Min. panel dimension (with lifting table feeding): 2400x1200 mm. Max. panel dimension (with lifting table feeding): 5500x2070 mm. Max. panel dimension (without lifting table feeding): 5800x2010 mm. Safety device according to CE: included. Supply voltage: 400 V / 50 Hz. MACHINE CONFIGURATION. Machine bed: The machine bed structure made of steel is welded using arc welding and then milled and finished on CNC machines. The rigid structure of the machine bed guarantees both high cutting quality with high cutting speed, as well as the enormous durability of the entire machine. Saw blade overhang: 100 mm. Power of main saw motor: 7.5 kW. Power of scoring saw motor: 2.2 kW. Diameter of main saw blade: 400 mm. Diameter of scoring saw blade: 215 mm. Feed rate of saw carriage: Forward: 1-170 m/min. Return: 170 m/min. Motorization of saw carriage feed: Servo drive. Diameter of dust extraction port (bottom, 1x): 200 mm. Diameter of dust extraction port (top, 2x): 115 mm. Thanks to the rigid machine bed construction, the masses are distributed in the best possible way, which prevents twisting and thus guarantees an absolutely vertical run of the saw blade. Machine table made of steel with individual, removable support elements made of high-quality, durable material. The saw carriage runs on two round guides, which are mounted horizontally on one level. Large prism rollers (diameter 86 mm), with spring-loaded counter rollers, ensure smooth linear feed, as well as very low contact pressure and enables virtually wear-free operation of the saw carriage. The weight and forces acting on the saw carriage are evenly distributed on the two guides (50/50) and on each individual prism roller. The saw carriage runs absolutely without lubricant on the guides. The two guides are located away from the cutting line, outside the direct dust area. The diameter of the guide rods is 40 mm, making them the largest and most stable guides used in this sector. Pneumatic quick clamping system; for quick and convenient tool changes. This system is extremely reliable in operation, as it is mechanically clamped via a flange with a bayonet lock and spring force and unlocked via a pneumatic quick coupling. The flange must be rotated by approx. 10° in order to remove it. Due to excellent accessibility and the fact that the operator does not need any other tools, the tool change is very easy and can be carried out in seconds. The scoring saw adjustment is made from the outside. Gkjdozn N Ikepfx Acmed

Condition: excellent (used), CATALOGUE NUMBER 7906 Technical data: - track width 400mm - working width of the roller 400mm Godezx Rqhepfx Acmskd - max. blade diameter 450mm - blade bore diameter 70mm - max. cutting height 160mm - table width with extension 720mm - table length 1900mm - from above: - feed fingers/ejectors 2 rows - sliding roller, metal, pressure roller - feed fingers/ejectors - sliding roller, metal, pressure roller - saw mandrel - smooth sliding roller, metal, sliding - from below: - guide rail - feed fingers - track - electric body lifting - central track lubrication - 2 feed speed types + stepless - feed motor 0.9kW - main motor 30kW - diameter of the dust extraction nozzle 260mm - overall dimensions (L/W/H) 2350x1800x2200mm - weight approx. 2000kg ADVANTAGES – Made in Italy – New track and slides – Very good condition – Used multi-blade saw Net price: 55900 PLN Net price: 13000 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), cutting height (max.): 335 mm, cutting width (max.): 500 mm, control type: manual, pivoting range: 30,135 °, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 1,900 mm, total length: 2,350 mm, total width: 1,450 mm, overall weight: 1,320 kg, table height: 750 mm, Equipment: documentation/manual, MEBA 335 DG double miter bandsaw (semi-automatic) incl. powered chip brush, micro-dosing system, and clamping force adjustment Description: Offered is a MEBAeco 335 DG, a semi-automatic double miter bandsaw manufactured in Germany (MEBA, Westerheim). It is the proven solution for precise miter cuts in workshops and production environments. The machine is robust, easy to operate, and offers excellent value for money. Cutting range: 90°: round Ø 335 mm / flat 500 x 335 mm 45° right: round Ø 330 mm / flat 320 x 335 mm 45° left: round Ø 305 mm / flat 305 x 335 mm Technical data: Saw band: 4400 x 34 x 1.1 mm Working height: 750 mm Digital miter display with 0.1° resolution Patented MEBA miter system: the pivot point remains the same for every angle, thus ensuring exact length measurement Electric saw feed with ball screw spindle Gkodpfxo Ai D Dpe Acmed Hydraulic material clamping over the entire stroke Semi-automatic sawing cycle with the steps: clamping, sawing, and return to the pre-set height Additional equipment included in the offered price: Powered stationary chip brush: reliable band cleaning for longer saw band life Micro-dosing system (minimum quantity lubrication): clean cut without coolant emulsion, dry chips, less cleaning effort Clamping force adjustment: material-friendly clamping, even with thin-walled profiles and tubes Mounting elements: for stable and low-vibration installation Price: MSRP 37,915 € / special price 31,500 € net plus VAT, ex works For further information, a demonstration, or a customized offer, I am at your disposal.

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers for 3 m sliding carriage Gkedpjtxirfofx Acmod

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit cutting length 3100 mm Gsdpfx Aeq Rb Irjcmekd with rear fence

Condition: used, Year of construction: 2012, input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 4,300 mm, saw blade diameter: 350 mm, saw blade bore: 75 mm, table height: 920 mm, Equipment: scorer, HOLZMA OPTIMAT HPP 250/43/43, year of manufacture 2012. Used horizontal panel dividing saw for coated and uncoated wood-based panels. Technical data: - Cutting length: 4,300 mm - Cutting width / program carriage travel: 4,300 mm - Saw blade overhang: 75 mm - Main saw motor: 7.5 kW - Scoring saw motor: 1.1 kW - Saw carriage feed rate: 1–120 m/min - Connection: 400 V / 50 Hz; connected load 13 kW - Working height: 920 mm; compressed air 6 bar Equipment: - Power Control CADmatic 4 – Practive, 17-inch TFT - 6 clamping devices, the first three with two fingers - 4 air cushion tables, each 1,800 × 650 mm, with central blower - Central angular stop - Cutting height automatic system, adjustable clamping device and pressure bar clamping force - Motor-adjustable scoring saw and Power-Loc quick clamping system - Grooving/cutout package with MANUAL groove depth adjustment, cutout program, insertion grooves and stress-free cutting - Labeling with part graphics and label program; label printer available - Data transfer online and USB - Operating and documentation texts in German Location: Müncheberg, Germany. Availability and handover after scheduling an appointment. Gsdpfx Ae Ai Sd Tjcmskd Price on request. Technical specifications according to available machine documentation. Scope of supply, inspection, loading and transport by agreement. Subject to change and errors.

Condition: used, Year of construction: 2017, Behringer LPS 60-T - Vertical metal bandsaw - Year of manufacture: 2017 - Operating hours of the saw drive: 32441 h - Rigid saw frame in C-design, minimizing torsion and vibration - Robust gearbox with appropriate gear ratio and drive with higher power (saw drive 5.5 kW / band speed 10-110 m/min) - Designed for saw blades with the dimensions 54 x 1.6 mm, primarily for cutting difficult-to-machine materials and larger dimensions - 2 saw blade wheels with wear-resistant running surface - Combined roller and hydraulically pre-tensioned carbide sliding guide for the saw blade - Hydraulically controlled saw blade tension, electrically monitored with automatic pressure reduction when the machine is at a standstill - Automatic shutdown in case of saw blade breakage - Saw blade drive with frequency converter - By opening the door, the blade change can be carried out effortlessly and without tools by one person. Blade change time approx. 2 minutes - Saw blade cleaning by rotating double brush Ø100 mm - Cutting deviation for normally machinable materials within 0.1 mm per 100 mm cutting height - Heavy-duty, torsion-resistant machine stand in box design - Chip conveyor with separate electric drive - Hydraulic system designed in a block construction - The material support table is mounted on linear guides and can be moved via servo drive Technical data - Working area L x W x H: 1260 x 720 x 600 mm - Minimum material height: 10 mm - Minimum section width: 5 mm Gedpjz H Ac Asfx Acmjkd - Inner table support area: approx. 1260 x 680 mm - Inner table max. load: 3000 kg - Outer table support area: approx. 1260 x 680 mm - Outer table max. load: 3000 kg - Material support height approx.: 1050 mm (including base pan) - Cutting speed: 10 - 110 m/min - Saw blade dimensions: 5400 x 54 x 1.6 mm - System or band tension pressure: 85 bar - Quantity of coolant: approx. 100 l - Motor power - saw drive: 5.5 kW - Motor power - hydraulic pump: 2.2 kW - Motor power - coolant pump: 0.15 kW - Motor power - chip conveyor: approx. 0.26 kW - Connected load: approx. 11.5 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V = (DC) - Current draw: approx. 31 A - Fuse rating: 35 A - Conductor cross-section: min. 10 mm2 - Machine dimensions W x H x D: 3150 x 2970 x 2500 mm - Weight (net): approx. 3200 kg

Condition: used, Year of construction: 2002, Carriage length: 3200 mm Cutting width at rip fence: 1300 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 150 mm Scoring unit: yes Saw blade swivel range: +45° Saw blade height adjustment: electric Saw blade tilt adjustment: electric Rip fence adjustment: electric Saw blade angle display: digital readout Cutting height display: digital readout Rip fence display: digital readout Gjdsyq R Acjpfx Acmokd Crosscut scale display: scale Scoring unit adjustment: electric Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction port: 80 and 120 mm Machine length: 3500 mm Machine width: 2300 mm Weight: 1200 kg