Used Moving Column Milling Machine for sale (67,964)

Condition: good (used), Year of construction: 1989, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine comes from a training center. Equipment: Gedpfxszrt Rkj Aafouf 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Universal milling machine DMG FP4M Special Edition With 3-axis digital display ND7013 by Heidenhain, in new condition, Made in Germany, CE compliant!!! Technical data: >> Year of construction 2022 >> Fixed angular table, clamping area 480x800 mm >> Spindle drive, speed range 25-3000 rpm, stepless adjustment with input on the control panel >> Controlled main drive 6 kW >> Vertical milling head, swiveling +- 90 degrees (180 degrees) >> Linear axes, feed range 6-500 mm/min >> Rapid traverse 1500 mm/min >> Space requirement (W+D) approx. 2.2 x 1.9 meters >> Weight approx. 1600 kg Accessories and equipment: >> Heidenhain digital display ND 7013 >> Coolant system >> Minimum quantity lubrication Godszung Ejpfx Aafsuf >> Central lubrication >> Machine feet >> Operating manual, etc. About the machine: Offered is a universal milling machine DMG FP4M Special Edition with a 3-axis digital display by Heidenhain ND 7013, in new condition. A reliable and user-friendly machine, Made in Germany. An oil change has been performed. Mechanically and electrically inspected. Take the opportunity to inspect and test the Deckel machine on-site while it is powered on.

Condition: good (used), Year of construction: 1974, functionality: fully functional, * 3-axis digital readout (Heidenhain) * Adjustable vertical milling head with quill adjustment * Additional horizontal spindle * REPAR 2 safety device * Machine light * Anti-vibration mounts x-travel 500 mm y-travel 300 mm z-travel 380 mm table surface area 800 x 420 mm table load capacity 400 kg tool taper ISO 40 Gusdpfx Aaozrm Snofef spindle turning speed range 40 - 2000 rpm feeds longditudinal/cross/vertical 10 - 500 mm/min rapid traverse 1500 mm/min main drive 3 kW weight of the machine approx. 1,3 t Transport dimensions: The machine is loaded onto a heavy-duty pallet; Dimensions: 1800 x 1100 x 2100 mm (length x width x height)

Condition: good (used), Year of construction: 1988, functionality: fully functional, spindle speed (max.): 4,200 rpm, spindle speed (min.): 60 rpm, table width: 228 mm, table length: 1,066 mm, input voltage: 400 V, Bridgeport 2HP Milling Machine Spindle speeds 60-4200rpm 42" x 9" Table 2 axis DRO Gedpfx Aajzl Tm Ejfsuf Coolant pump & system Work light Spindle taper R8

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 2507, Used CNC bed milling machine / traveling column milling machine with automatic tool changer and swivel head. Manufacturer: TIGER S.p.A. (Italy) Type: TFA 5 RT Year of manufacture: 2002 Serial number: 2507 Guedpjzffnuefx Aafsf The "RT" designation at Tiger indicates a version with a rotary table or 5-axis machining capability. Heidenhain CNC control (probably TNC 426 or TNC 430) Automatic tool changer Tool magazine Tiger TFA 5 RT ISO 50 tool holder Swivel milling head Bed-type machine with a large working area Full enclosure Tool changer Weight 650 kg Connection 400 V / 50 Hz Power output 45 kW Maximum current 80 A Technical data X-axis travel 2,500 mm Y-axis travel 1,200 mm Z-axis travel 1,200 mm Table size 1,000 x 1000 mm Tool holder ISO 50 Spindle speed 2,500 rpm Main drive 45 kW Number of tool positions 60 Machine weight 12,000 kg

Condition: good (used), Year of construction: 2023, operating hours: 1,382 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 10,000 rpm, CNC Milling Machine Manufacturer: EMCO, Type: Emcomill E 350 Year of manufacture: 2023 Operating hours: only 1,382 hours Technical data Manufacturer: EMCO Type: Emcomill E 350 Year of manufacture: 2023 Operating hours: 1,382 h X-axis: 350 mm Y-axis: 250 mm Z-axis: 300 mm Tool holder: SK 30 Tool magazine: 20 tools Operating voltage: 400 V / 50 Hz Power consumption: 7 kW Spindle speed: 10,000 rpm Workpiece weight: max. 100 kg Dimensions of slatted table: L 520 x W 300 mm Machine dimensions: L 2,600 x W 1,800 x H 2,220 mm Dimensions of pallet with accessories: L 1,200 x W 900 x H 800 mm Machine weight: approx. 2 t Pallet weight: approx. 115 kg Equipment • Siemens Sinumerik 828 D control system with Shopmill programming • Enclosed cabin • 3-axis CNC milling machine • Chip conveyor • Tool package with various tool holders • 20-tool magazine • High-pressure coolant system (8 bar) Gsdpfxszil Rko Aafouf • Machine documents All information is provided without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2003, x-travel 780 mm y-travel 560 mm z-travel 560 mm tool taper SK40 control HEIDENHAIN iTNC 530 weight of the machine ca. ca.12,5 t required space 3,40 x 3,30 x 2,60 m DECKEL MAHO DMC 60T BJ 2003 Operating hours: 32532.7 The machine DMC 60T (1659) is in very good condition and is ideally suited for precise milling operations thanks to powerful motor spindles, high feed rates, and a flexible tool magazine. All technical details can be found below. Working range Travel distance/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Worktables NC rotary table – clamping surface, pallet: diameter 500 x 630 mm Centering bore: diameter 50^H6 20 deep mm Locating bore: diameter 20^H6 20 deep mm Torque of the table at: – 100% duty cycle: 1603Nm – 25% duty cycle: 2813Nm Max. rotation of the table: 30 rpm Feed: 7200 ./min. Permissible table load: 400 kg Tool magazine with magazine SK 40 Feed drive AC servo motors in digital technology for axis X, Y, Z Feed speed X-, Y-, Z-axis infinitely programmable: 20–15000 mm/min. Rapid traverse X-, Y-, Z-axis: 50 mm/min. Setup operation X-, Y-, Z-axis: 20–2000 mm/min Measuring system Resolution | X-, Y-, Z-axis: 0.001mm Input unit | X-, Y-, Z-axis: 0.001mm Position tolerance | X-, Y-, Z-axis: 0.010mm Working area Travel/ X-axis: 780mm Y-axis: 560mm Z-axis: 560mm Spindle main speed: 18000min^-1 Speed Infinitely programmable: 20–24000 min^-1 In setup mode: 20–800 min^-1 Main drive 24000 min^-1: motor spindle without gearbox Speed Infinitely programmable: 20–24000 min^-1 Gedpfxewm Rrwj Aafsuf In setup mode: 20–800 min^-1 Weight Machine with tool changer and transport base: approx. 10100kg Installation weight Machine with fixed table and tool changer: max. 11500kg Dimensions Machine: 3.40 x 3.30 x 2.60 m Chip conveyor: 2.77 x 1.00 x 2.07 m Band filter system 900l: 2.22 x 1.40 x 2.20 m

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: Gedpsxlqxfefx Aafsuf - MK3 quill - Machine lamp - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: excellent (used), Year of construction: 2018, overall weight: 320 kg, total length: 1,200 mm, total width: 800 mm, total height: 700 mm, CNC Bed-Type Milling Machine Correa Anayak - HVM BIRA Spindle ISO 50 (DIN-69871-B) Pull studs DIN-69872-B Clamping force 1900 daN Automatic B Axis 1.0 Degrees Automatic C Axis 2.5 Degrees Power 60/100 % 22/30 kW Speeds 60 - 3000 2 Speed Range Automatic lubrication (Air-Oil) Gear; ZykloPalloid, Klingelnberg-System, HPG-5 Qulaity-6 with DIN3965 Length:1200mm Width:800mm Height:700mm Weight:320kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Guodszcpg Dopfx Aafjf

Condition: used, Year of construction: 1988, Bed milling machine Manufacturer: Correa Type: A16 Year of manufacture: 1988 Control system: HEIDENHAIN TNC415 Travel distances X/Y/Z: 1,800 x 800 x 800 mm Clamping surface: 2,000 x 630 mm Workpiece weight: 3,000 kg Operating hours: 12,103 Power: 19 kW Guedpfxjzt U T As Aafsf Spindle type: ISO 50 Dimensions L/W/H: 4,886 x 2,720 x 2,500 mm Machine weight: 7,500 kg 13826

Condition: used, Year of construction: 1988, Bed milling machine Gusdszt U R Iepfx Aafsf Manufacturer: Correa Type: A10 Year of construction: 1988 Control system: HEIDENHAIN TNC 355 Travel distances X/Y/Z: 1,300 x 630 x 630 mm Clamping surface: 1,700 x 630 mm Workpiece weight: 3,000 kg Operating hours: 25,845 Power: 19 kW Spindle type: ISO 40 Dimensions L/W/H: 3,870 × 2,630 × 2,200 mm Machine weight: 6,800 kg

Condition: refurbished (used), A06B-6114-H105 FANUC servo amplifier module, refurbished and tested. Multiple units in stock. Are you interested in this product or would you like more information? Please feel free to contact us. Additional photos are available upon request. The price is negotiable. For more parts and other materials, please also visit our website, CNC-Service. Gedpfszi T Tysx Aafouf Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: refurbished (used), A06B-6079-H106 Servo Amplifier module, refurbished and tested. Are you interested in this product or would you like more information? Please feel free to contact us. Additional photos are available upon request. The price is negotiable. Guodszi T S Aepfx Aafjf For more parts and other materials, you can also visit our website, CNC-Service. Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: refurbished (used), A02B-0238-B542 FANUC series 18i-TA, refurbished and tested. Are you interested in this product or would you like more information? Please feel free to contact us. Gjdpfszi T Nnox Aafjuf Additional photos are available upon request. The price is negotiable. For more parts and other materials, please also visit our CNC-Service website. Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: refurbished (used), A02B-0306-B522 FANUC Series 31i - A5, refurbished and tested Gsdpozi Tw Sefx Aafsuf Are you interested in this product or would you like more information? Please feel free to contact us. Additional photos are available upon request. The price is negotiable. For more parts and other materials, please also visit our CNC-Service website. Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: refurbished (used), A06B-6079-H101 FANUC servo amplifier module, refurbished and tested. 2 units in stock. Are you interested in this product or would you like more information? Please feel free to contact us. Additional photos can be provided upon request. The price is negotiable. For more parts and other materials, please also visit our website, CNC-Service. Gusdozi Tgaopfx Aafef Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: refurbished (used), A06B-6127-H202 FANUC, refurbished and tested. Are you interested in this product or would you like more information? Please feel free to contact us. Gujdpjzi Tgtofx Aafjf Additional photos are available upon request. The price is negotiable. For more parts and other materials, please also visit our website, CNC-Service. Do you have any questions or are you looking for something specific? Please do not hesitate to contact us!

Condition: refurbished (used), A06B-6058-H005 Servo Amplifier, refurbished and tested. Gjdpfx Aajzi S U Nsfjuf Are you interested in this product or would you like more information? Please feel free to contact us. Additional photos can be provided upon request. The price is negotiable. For more parts and other materials, please also visit our website, CNC-Service. Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: refurbished (used), A06B-6140-H037 Power supply module, refurbished and tested. Are you interested in this product or would you like more information? Please feel free to contact us. Gujdpfx Aozi Sy Seafef Additional photos are available upon request. The price is negotiable. For more parts and other materials, please also visit our website, CNC-Service. Do you have any questions or are you looking for something specific? Please do not hesitate to contact us!

Condition: refurbished (used), A06B-6117-H210 Servo Amplifier, refurbished and tested. Are you interested in this product or would you like more information? Please feel free to contact us. Additional photos can be provided upon request. The price is negotiable. For more parts and other materials, please also visit our website, CNC-Service. Gujdpozi Sxzofx Aafof Do you have any questions or are you looking for something specific? Please don’t hesitate to contact us!

Condition: refurbished (used), A06B-6117-H211, refurbished and tested. Are you interested in this product or would you like more information? Please feel free to contact us. Gjdpfxozi St Eo Aafeuf Additional photos are available upon request. The price is negotiable. For more parts and other materials, please also visit our website, CNC-Service. Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: refurbished (used), A06B-6117-H105 Servo Amplifier, FANUC, refurbished and tested. Are you interested in this product or would you like more information? Please feel free to contact us. Additional photos are available upon request. The price is negotiable. Gusdpfxjzi Sv Ho Aafef For more parts and other materials, you can also visit our website, CNC-Service. Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: refurbished (used), A06B-6096-H105 FANUC, refurbished and tested. Are you interested in this product or would you like more information? Please do not hesitate to contact us. Additional photos are available upon request. The price is negotiable. Gusdpfxszi Spts Aafjf For more parts and other materials, please also visit our website, CNC-Service. Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: refurbished (used), A06B-6079-H206#EM FANUC, refurbished and tested Are you interested in this product or would you like more information? Please feel free to contact us. Additional photos are available upon request. The price is negotiable. For more parts and other materials, you can also visit our website, CNC-Service. Gjdpfx Aaozi Sqkjfjuf Do you have any questions or are you looking for something specific? Please feel free to contact us!

Condition: refurbished (used), A06B-6087-H126 FANUC power supply module, 106A, 29.8 kW Are you interested in this product or would you like more information? Please do not hesitate to contact us. Gjdpszi Sncefx Aafsuf Additional photos are available upon request. The price is negotiable. For more parts and other materials, please also visit our CNC-Service website. Do you have any questions or are you looking for something specific? Please feel free to contact us!