Used Motorized Folding Machine for sale (77,268)

Condition: used, We offer for sale a Heidelberg Stahlfolder KH-82 / PFH-82 folding machine, manufactured in Germany in 2005. The machine is currently installed in a printing facility and is available for inspection. It is suitable for professional post-press production and folding work. Machine details: Manufacturer: Heidelberg Postpress Deutschland GmbH / Stahlfolder Nljdpfx Acjzfiv Aemsc Model: PFH-82 / KH-82 Year of manufacture: 2005 Product No.: 1224407993 Serial No.: FH.HCC0-00336 Configuration: 4 folding pockets / cassettes and 2 knives Maximum sheet size: 760 × 1200 mm Minimum sheet size: 200 × 180 mm Made in Germany Condition: The machine is in used working condition. It has been installed in a production environment and shows normal signs of use. Available for inspection before purchase. Included: Folding unit with 4 cassettes 2 knife folding units Feeder and delivery system as shown in the photos Control console / operating panel Additional information: The machine is sold as seen in the photos. Dismantling, loading, transport and installation are not included in the price unless agreed separately. For more information, additional photos, video of the machine in operation, or to arrange an inspection, please contact us.

Condition: used, We offer for sale a Horizon AFC-744S Cross Folder in used working condition. The machine is currently installed in a printing facility and is available for inspection. It is suitable for professional post-press production and high-quality folding work. Machine details: Manufacturer: Horizon International, Inc. Model: AFC-744S Cross Folder Serial No.: 354002 Configuration: 4 folding cassettes + knife + cassette + knife Maximum sheet size: 738 × 1100 mm Minimum sheet size: 210 × 297 mm Power supply: 400V, 3-phase, 50/60Hz Nedpfjzfivvsx Acmelc Made in Japan Condition: The machine is in used working condition. It has been installed in a production environment and shows normal signs of use. Available for inspection before purchase. Included: Horizon AFC-744S folding machine 4 folding cassettes Cross-folding knife unit Additional cassette and knife section Feeder and delivery system as shown in the photos Control panel / operating screen Additional information: The machine is sold as shown in the photos. Dismantling, loading, transport and installation are not included in the price unless agreed separately. For more information, additional photos, video of the machine in operation, or to arrange an inspection, please contact us.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, Offer without obligation 1) Combi folding machine Make: MBO Type: K 800.2 S-KTL-Aut. Size: 78 x 120 cm Year: 2009 Equipment: - Automatic combi folding machine MBO K 800.2 -.S -KTL. - pallet feeder K8 - FP120 - VACULIFT separation head - loading of feeder from 2 sides possible - feeder pile-height 120 cm - VIVAS special sheet infeed- and alignment system - 1. fold-unit = 4 combiplates (stainless steel) - rear located knife shafts- - KTL- crossfold unit with 2 pneumatic driven high-speed fold-knifes - 1 laying buckle after 1. knife - rear located knife shafts after laying buckle - automatic pocket- and switch blade adjustment - NAVIGATOR -Control with Touchscreen for all functions, settings and presetting-functions - RAPIDSET-basecontrol incl. motorizing of all combi fold pockets - noise hoods and guards on parallel- and cross-fold. - approved and maintenance free, economical and silent belt drive - Palamides Alpa 500 delivery. - special compressor ! - accessories, techn. documentation - machine in excellent condition ! Price under request Nlodpfsy I Txvjx Acmjc more pictures and video are available,

Condition: good (used), Year of construction: 1995, functionality: fully functional, infeed width: 600 mm, type of input current: three-phase, working width: 520 mm, stack height: 610 mm, overall weight: 868 kg, input current: 12 A, input frequency: 50 Hz, Equipment: compressor, documentation/manual, Folding machine GUK K52/4_KTL-F4 - 4 pockets Nodpfjzcm Rtox Acmolc - 1 knife unit - height-adjustable delivery - new conveyor belts (see photo + video) - compressor

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: VVE/17636, Z07/78, MBO T530-1-53/4 F folding machine – flat pile feeder, pump and accessories – 4 fold pockets Nlodpfx Aoxwpqdjcmsc

Condition: used, Manual folding machine Schuller MAH 2-2000, working width 2030 mm, sheet thickness 2.0 mm Nsdpexn Avnsfx Acmslc

Year of construction: 1969, condition: used, Swivel bending machine, Albert Stahl, type ABK 400/5 Usable length: 2530 mm Nlsdeh Rkh Depfx Acmsc Sheet metal thickness: 5 mm

Condition: used, Year of construction: 1976, machine/vehicle number: 761907, General / technical data: Heavy-duty mechanical swivel bending machine with a robust welded construction, in very good condition. Working width: 2000 mm Material thickness for steel ST 50 max.: 20 mm Opening of the upper die (clamping die): max. 475 mm Adjustability of the bending die: 200 mm, motor-driven height adjustment Bending angle: 130°, adjustable via electrical angle input Upper die speed: 6 mm/sec Nsdecvtbyepfx Acmslc Bending die rotation speed: 1.25 rpm (approx. 90 sec for a 90° bend) Backstop: motor-driven, adjustable from 50-999 mm, with digital length display Machine dimensions (h x w x d): 3600 x 4350 x 4400 mm (without pit / with bending die platform) Control cabinet dimensions (h x w x d): 1800 x 1200 x 400 mm Drive power, bending drive: 30 kW Drive power, upper die (clamping die): 22 kW Power supply: 500 Volt 50 Hz / control voltage 220 Volt Weight: 24,500 kg Accessories / special equipment: • 5 sets of bending tools, each consisting of a clamping and bending rail: R 8, R 12, R 15, R 20, R 40 • Foldable backstop • Central lubrication system • Machine documentation Note: • Machine comes from a repair facility. • A pit 900 mm deep (foundation) is required for the machine. The substructure of the swivel drive visible in the pictures is only used for test runs and demonstrations.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: S 3057/13, infeed width: 700 mm, type of input current: three-phase, working width: 700 mm, Equipment: compressor, documentation/manual, MBO B30 folding machine, maximum sheet size B1. Shingle-stream feeder. Nodpfszb H Susx Acmelc 1st folding unit – 4 pockets. 2nd folding unit – 4 pockets. 3rd folding unit – 4 pockets. Height-adjustable delivery on wheels.

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor Nsdpfxeb A Nx De Acmjlc -Power: 0.23 kW -Speed: 18000 rpm at 300 Hz -Dimensions: 210/70/H100 mm -Weight: 2 kg

Condition: used, Year of construction: 2009, 1st Folding Unit 6 Buckles MBO Vario Control incl. touchscreen Flat pile feeder Working width 53 cm Spiral folding rollers in parallel fold with standard PU roller coating Stainless steel knife shafts, 30 mm Motorized folding rollers + MW adjustment VACUSTAR separation head Feeder extension to 100 cm (instead of 84 cm) 2nd Folding Unit Vario Control Working width 53 cm Spiral folding rollers Motorized folding rollers + MW adjustment Sheet monitoring with transfer table Including MBO Delivery A56 The ASP delivery shown in the photos is not included. Included is the A56 delivery as shown in the last photo. Njdpfx Acjxc If Remelc

Condition: excellent (used), Year of construction: 2015, Offer consisting of: Heidelberg Stahlfolder Ti 52 Proline Max. sheet size: 52 x 84 cm Min. sheet size: 14 x 15 cm Max. folding speed: 180 m/min Learning mode for sheet measurement and automatic adjustment of suction cycle length for sheet spacing Setup mode / single sheet function Frequency-controlled inverter drive for stepless speed regulation Right-angle folding unit KBi 52 Connectable to the 1st and 2nd folding stations Ti 52 Max. sheet size: 52x42 cm Min. sheet size: 16x4 cm Max. cycle rate: 30,000 sheets/h SAF-56 mobile twin-stream shingled delivery Nlsdpfx Acsy D Rx Esmsc

Condition: good (used), Year of construction: 1990, Year: 1990 Format max:550x 920mm 6 cassettes 2 electronic crosses compressor Tremat New belts Nledpfsd Dikcsx Acmjc Instruction Perforation

Condition: excellent (used), Year of construction: 1998, sheet thickness steel (max.): 5 mm, Hydraulic swivel bending machine Manufacturer: HOCHSTRATE Type: 3000/5 Year of manufacture: 1998 Technical data Manufacturer: HOCHSTRATE Type: 3000 x 5 Nljdpfx Acjvrxnxemjc Year of manufacture: 1998 Sheet width: 3040 mm Bending capacity: 5 mm (400 N/mm2) Motor power: 7.5 kW Space required: approx. 4.7 x 1.90 x 2.20 m Weight: approx. 6.5 t Equipment • PLC control • Bending rail 30 mm All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: good (used), GUK K50/4/1/FL 2-50 Automatic Folding Machine Machine in perfect condition, ready for production. Nedjy Tu N Hepfx Acmelc Format: 500x700mm. Folding speed: 30-160m/min Equipment: 4 parallel cassettes electronically adjusted via computer 1 cross-cut knife First cassette extended. Continuous speed control via inverter control panel Counter with batching function and folding speed indicator. Rietschle compressor. Raised soundproofing hood. Tool roller for mounting tools such as perforation, creasing, and cutting. FL2-50 feeder with vacuum unit Window cassette with control unit. Mobile delivery with continuous speed control.

Condition: good (used), STAHL T36/4 + knife Folding Machine for Pharmaceuticals Made in Germany. The world’s highest-class folding machine. The machine is ready for production. Smooth feed and folding speed adjustment. Nledpfx Asy Tu Ngjcmsc 4-cassette module + cross knife + delivery. Depp pile lift feeding (high stack) This machine is ideal for folding pharmaceutical leaflets thanks to its low fold and large number of cassettes. Cassette soundproofing. Electronic counter with a batching function and adjustable time between batches. Technical specifications: Max size: 360x550mm Min size: 80x100mm Weight: 450kg 380V power supply

Condition: good (used), Heidelberg Stahlfolder Ti 52 4/4/1 Folding Machine Machine configured for folding up to 16 pages. Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Configuration: – 4 cassettes on the first module Ti-52 – 4 cassettes on the second module 2.Ti-52 – 1 electronic knife – Mobile delivery Njdpfey Tu Naox Acmolc Inverter-controlled folding speed adjustment Cassette noise reduction Becker compressor Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts, tools, and documentation included. The machine is in good condition and ready for operation.

Condition: used, Round Pile Buckle Folding machine Heidelberg Stahlfolder TD 66/6-4-4 Falzmaschine / Folding machine Heidelberg Stahlfolder TD 66/6-4-4 Baujahr / Year 1996 - Serial-No. 66748/95-225117 Rundstapelanleger / Round Pile Feeder  Nodpfxey Akwrj Acmelc Arbeitsbreite / Working width max. 660mm Falztyp / Folding Type 6 - 4 - 4 Schuppenauslage / Stream delivery Inkl. Handbücher / Include Manuals Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: ready for operation (used), Year of construction: 2003, sheet width 2520 mm plate thickness 2.50 mm ST thickness at "Niro-steel" 1.50 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm Bending speed ca. 120 Grad/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 total power requirement 7.2 kW voltage 400 V weight 3430 kg Current new price ~ 100.000 euros From a maintenance workshop With very good equipment (!!) Equipment: - CNC electric motor-driven universal swivel bending machine * High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - Rotatable upper beam / as automatic tool change system * With 2x tool stations (sharp and goose foot bending rail) * Reduces set-up and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model POS 2000 * Control panel at front right (operable with PC mouse) * Color display * USB interface Nodpoxbh Eujfx Acmelc * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swivel control, front right - Servo converter-controlled drives * for bending/upper beam & electric backgauge - CNC motorized lower beam adjustment - CNC electric motorized backgauge * Travel speed 300 mm/sec. - with rear sheet metal support surface, including ball rollers - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 010001, Roundpile feeder model RFU-74, cross folder AFC-744AKT, 32-page machine, standard book tooling parts. Nsdpfxoykrvws Acmelc

Condition: good (used), Creasing and folding machine Heidelberg Stahlfolder + Popp Maschinenbau SRT + MWS Nedpjy S Edfsfx Acmelc Machine in very good condition, ready for production. Like new. Year of production 2012. It was used in the production of invitations, photo book inserts and leaflets. Modular design allows for expansion, e.g. installation of marking printers. Technical data: Paper format min 105 x 150 mm Paper format max 520 x 720 mm Feeding from a high stack Main and cross module with the possibility of installing creasing, perforating and cutting tools. Possibility of installing Heidelberg or Techni-Fold tools, Smooth speed regulation Becker compressor Double sheet sensor Electronic counter with packaging Set of inspection cameras.

Year of construction: 2011, condition: new, Manual swing bending machine with a gooseneck die holder 100 mm high and segmented upper and lower tools. Bending length 1020 mm. Bending capacity 2.0 mm. Bending angle 0-150°. Weight 370 kg. Nsdpfx Acj N N D Esmolc

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, Equipment: documentation/manual, Technical data: Useful length: 3240 mm Performance at 400N/mm2: 6.00 mm Stroke of upper beam: 1030 mm Bending beam adjustment: 180 mm Drive power upper beam: 2x 9.45 kW Drive power bending beam: 2x 9.42 kW Upper beam Upper beam pre-stop from 15 mm Geometry: 180° Hydraulic tool clamping (WZS 5000) Bending beam Up’n Down bending beam, program-controlled Pneumatic clamping WZS 7000 Njdsxn Dhlopfx Acmjlc Motorized bending beam adjustment 180 mm Motorized bending center adjustment 100 mm Motorized central crowning

Condition: ready for operation (used), max. working width: 2040 mm for metal sheets up to: 2 mm opening width top clamping bar: 90 mm adjustment bending cheek: 90 mm Nedpfx Aod Rbz Tecmjlc clamping bar drive: 1,5 kW below cheek drive: 4 kW electrical connection: 380 V kW weight: 2600 kg space needed: 3050 x 800 x 1350 mm

Year of construction: 1972, condition: used, machine/vehicle number: 32 416, max. working width: 1530 mm for metal sheets up to: 2,5 mm opening width top clamping bar: 290 mm adjustment bending cheek: 90 mm clamping bar drive: 1,1 kW below cheek drive: 3 kW rear stop: ja mm weight: 2200 kg Njdpsy Np Asfx Acmolc space needed: 800x3000x1380 mm