Used Montage Hall for sale (766)

Condition: used, functionality: fully functional, machine/vehicle number: 001661U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, approximately 23,900 mm span x 6,300 kg capacity. Ref. 001661U * Stored indoors * Technically 100% in order and inspected All our new and used cranes, which we supply installed, come with a warranty! We can supply our offered cranes, if desired, including: * Adjustments in length and/or height, and repainting if required * Power rails / conductor bar * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, crane, jib crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Gkedpjzildqefx Aivsc Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001663U, load capacity: 10,000 kg, For sale Used Demag single-girder overhead crane, approximately 16,500 mm span x 10,000 kg capacity. Suitable for outdoor use. Ref. 001663U * Technically 100% in order and inspected. All our new and used cranes, which we supply with installation, come with a warranty! We can optionally supply our cranes including: * Adjustment in length and/or height, and possible repainting * Power rail / conductor bar system * Radio remote control * Tandem control * Installation and inspection Gkodpfx Aijzilfuovec You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. For more information, please visit the Jan Reiling B.V. website. Cranes, overhead crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: refurbished (used), Year of construction: 2022, operating hours: 169 h, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 210 kg, water tank capacity: 40 l, battery voltage: 24 V, The Kärcher B40 W Bp Pack D51 is from 2022 and has 169 operating hours. It has been completely overhauled by us, with each component being cleaned and tested for functionality. The Kärcher B40 W features a continuously variable drive, which greatly simplifies operation. The controls are also intuitive, eliminating the need for lengthy training sessions. Gjdjziml Nopfx Aivekc New, maintenance-free gel batteries are installed, and these can be conveniently recharged using the integrated charger. The suction foot was sandblasted and powder-coated in our workshop and fitted with new suction strips. A new brush is included in the scope of delivery. The Kärcher B40 W Bp Pack D51 is suitable for daily cleaning of, for example, workshops, halls or shops. Technical data: Working width: 51 cm Tank volume: 40 liters fresh / dirty water Area performance: approx. 2000 m²/h

Condition: like new (used), Year of construction: 2014, type of input current: three-phase, total width: 1,200 mm, total length: 1,600 mm, total height: 3,850 mm, filter area: 120 m², suction capacity: 7,200 m³/h, Dust extraction unit, fume extraction unit, self-cleaning filter from the renowned NEDERMAN brand. The FilterMax DX, designed by Nederman, is a modular filtration system capable of serving extraction points throughout the entire production hall. The FilterMax DX is designed to operate with dry dust that may pose an explosion hazard. The unit is equipped with a reinforced, double-grounded housing with a panel designed to withstand extreme loads that occur during an explosion. The unit is like new – it has never been used (stock surplus). Gkodpfxszf Hn Ao Aivoc Brand: Nederman Model: FilterMax DX 6000 TR Year of manufacture: 2014 Designation: EX II 1/3 D T=125°C Capacity: 7200 m3/h Filtration area: 120 m2 Filter cartridges: 12 pcs Fan power: 11 kW Inlet diameter: 300 mm ATEX panel to relieve explosion pressure ATEX check valve Unit dimensions: Width: 1.20 m x 1.60 m Height: 3.85 m Base: 1.10 m x 1.40 m Stock number: 0008

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Description (detailed specifications): o 5-axis stage o Modern, expandable user interface with EDX integration and image montage o SE detector o Scintillator-BSE detector Gksdpjzn Ihpefx Aivoc o In-lens detector o Low-vacuum system with BSE detector o Fully software-integrated JEOL EDX system o In-column current measurement o Navigation camera o Live camera o Control panel o Desk, PC with Windows OS, 2 x 24" monitors, keyboard

Condition: good (used), Year of construction: 2019, Heck DVAS 180 Refrigeration Unit, 180 kW Professional, industrial refrigeration unit from the premium manufacturer HECK Kältetechnik GmbH. Godpfxjzrlzzj Aivskc The unit is in very good condition for its age and has been reliably used until recently. Thanks to the modern refrigerant R513A, the unit is future-proof and meets current environmental and efficiency standards. Production cooling with heat recovery Technical data (according to the nameplate): Manufacturer: HECK Kältetechnik GmbH Model / Type: DVAS 180 Machine No.: T-19307 Year of manufacture: 2019 Refrigerant: R513A (Max. filling weight: 98 kg) Operating voltage: 400 V / 50 Hz Operating current: 85.4 A (Max. operating current: 141 A) Max. operating pressure: ND 19 bar / HD 28 bar CE certified: Yes (Number 0036) Performance data & application area Refrigeration capacity: 180 kW – Ideal for efficient cooling of large halls or commercial areas. Heating capacity: 290 kW – Highly efficient air heating through clever use of waste heat from the refrigeration cycle. Dehumidification capacity: approx. 100 liters per hour – Perfect for precise humidity control. Application areas: Due to these combined performance data, the unit is ideally suited for industrial production halls, large warehouses, logistics centers, or for demanding process cooling and commercial dehumidification. The following precise operating temperatures can be derived from the technical specifications and design data in the documentation for the Heck DVAS 180: 1. Refrigeration core area Evaporation temperature: The unit is designed for an evaporation temperature of 6 °C. Condensation temperature (liquefaction): The water-cooled plate condenser operates at a condensation temperature of 43 °C. 2. Air-side temperature ranges (process air) Depending on which ventilation or unit (e.g., cabin, cooling zone, or ADZ unit) is used, the air inlet and outlet temperatures vary: Standard cooling zone: Air inlet at 26.5 °C is cooled down to an air outlet temperature of 19 °C. Cabin air conditioning (ULA): Air inlet at 26 °C is conditioned to an air outlet temperature of 22 °C. Process air dehumidification (ADZ): The air enters at 26 °C and leaves the evaporator strongly dehumidified at 10.3 °C. Reheating (ADZ unit): A water-cooled reheater can raise the cooled air from 10 °C back to 17.5 °C. 3. Water-side temperature ranges (cooling water / heat recovery) Plate condenser (condenser cooling): Is designed for a water inlet of 32 °C and a water outlet of 38 °C (at a flow rate of 35 m³/h). Plate heat exchanger (heat recovery): Uses the hot gas energy to heat water from 42 °C to 47 °C. "One-stop shop: We would be happy to offer you suitable bank financing for your project." More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: new, functionality: fully functional, Year of construction: 2025, fuel type: diesel, overall weight: 4,500 kg, color: green, Diesel forklift at a fair price Perfectly suited for daily pallet transport as well as for loading and unloading. Gkodow Ew N Hjpfx Aivoc Capacity: 3500 kg Own weight: 4500 kg - Triplex mast - Side shifter Perfect for smaller commercial halls as well due to its excellent maneuverability.

Condition: new, functionality: fully functional, Year of construction: 2025, fuel type: electric, overall weight: 4,500 kg, color: green, Electric forklift at a fair price Perfectly designed for daily pallet transport as well as for loading and unloading. 3,500 kg lifting capacity Godpfxsw Ew R Rj Aivokc 4,400 kg own weight - Triplex mast - Side shifter - 260Ah battery (430 kg) Perfect for smaller industrial halls due to its maneuverability.

Condition: good (used), Plug-in shaft for friction wheel, impeller, bridge crane, hall crane, assembly crane, flange hub, gear plug-in shaft, coupling, power coupling, gear coupling, gear coupling -Manufacturer: Konecranes, stub shaft Gearbox stub shaft: for crane chassis -Type: unfortunately without type designation, suitable for gearbox ID 34705 / ID 34752 -Shaft: Ø 70 x 150 mm -Bolt circle: Ø 422 x 25 mm -Dimensions: see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 480 x 280 mm Gsdpev Hmncsfx Aivokc -Weight: 83 kg/piece

Condition: good (used), friction wheel, running wheel, bridge crane, hall crane, assembly crane, flange hub, coupling star, claw coupling -Coupling star: for crane chassis .: 1031 4149 -Type: Part 20 f. SDDL-5-200 -Dimensions: see photos -Quantity: 2 pieces available -Price: per piece -Dimensions: Ø 194 x 34 mm -Weight: 0.5 kg/piece Gsdpfx Aisv Hw Adsvekc

Condition: used, Year of construction: 2003, pressing force: 260 t, Hydraulic press brake Manufacturer: HACO Type: ERMS 60-260 Year of manufacture: 2003 Technical specifications Manufacturer: HACO Gkjdpfjwkttrjx Aivsc Type: ERMS 60-260 Year of manufacture: 2003 Pressure capacity: 260 t Bending length: 6000 mm Dimensions (L x W x H): approx. L 7.0 x W 2.0 x H 3.70 m Weight: approx. 31 t Equipment • ATS 560 digital control system • Fiessler light barrier at the front • Centrally adjustable crowning • Amada tool system • Controlled axes: Y1, Y2, X • Manual R-axis • 1 set of upper tools • 1 set of lower tools All information is subject to change. A demonstration is available at any time in the exhibition hall.

Condition: as good as new (ex-display), Year of construction: 2020, Here we offer you a resistance welding system. The system is designed for the automated resistance welding of the following joints: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any use of the system other than that described above is not intended and therefore not permitted! System layout: Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (lxb) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator: 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components: Gkodezd Rmgspfx Aivsc - Control cabinet - Protective enclosure - Linear unit Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Control: ST-T13V2.0 Power unit: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Type: BDE11154003 Condition: unused, machine has never been used in production Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, GREAT PRICE!!! ONLY 6,500,- Original price over 38,000,- Taylor Hobson Talyrond 265 roundness measuring device. Extremely accurate, it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, but also eccentricity, e.g. of cams on a camshaft, or journals of a crankshaft; it is certainly of interest to motorsport and tuning companies. The first photo is a "representative image" from a Taylor Hobson catalog, showing how it is set up, except for the computer; a newer, more modern HP model with a small form factor is included. Max. diameter 350mm Max. test piece height 500mm (higher measurements up to max. 1000mm can be taken by measuring in two halves....) Self-centering of the workpiece +/- 5mm Max. weight of test piece 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg, where it was used in a "medically clean environment"; it is extremely clean. It was never in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password....). It is also on the USB stick, perhaps to install it on another machine at your location. Gkedpfxjzcqy Ej Aivjc Accessories are included, the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and it also contains all the circuit diagrams and functional diagrams! The system will be shipped on two Euro pallets via a shipping company. It is already securely fastened to them. The Talyrond 265 and the desk will be well protected with bubble wrap, etc., and wrapped with stretch film for transport on the pallets. The system itself is fixed with "transport safety screws".... Shipping is at the buyer's expense and will be carried out on two Euro pallets.... The measuring system should definitely be set up and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on site; this is now recommended after a few years. Mistakes can be made during assembly and commissioning. For example, there are several locking screws for transport; if you forget them, the system could be damaged when it starts up. A truly well-maintained, very accurate system that will provide many years of excellent service!!

Condition: used, functionality: fully functional, machine/vehicle number: H2X386X01800, Year of construction: 2020, operating hours: 1,829 h, load capacity: 2,000 kg, lifting height: 5,070 mm, fuel type: electric, mast type: triplex, construction height: 2,300 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-Wheel Forklift Chassis number: H2X386X01800 Load center: 500 Mast type: Triplex Condition: Like new Technical condition: very good Description: Linde E20PH-02 electric forklift. Manufacturer: Linde. Model: E20PH-02. Year of manufacture: 2020. Operating hours: 1,829 h. Load capacity: 2,000 kg. Drive: Electric 48 V. Equipment: Triplex mast, overall height 2,300 mm, fork positioner, side shift, work lights, solid tires. The Linde E20PH-02 is in very good condition and impresses with its compact design and excellent Linde driving performance. Thanks to the triplex mast, fork positioner and side shift, the machine is ideal for demanding storage and logistics tasks. The low overall height of only 2,300 mm allows it to be used even in halls with limited headroom. The charger can be ordered separately upon request. Inspection and test drive possible by appointment. Linde E20PH-02 Electric Forklift Manufacturer: Linde Model: E20PH-02 Gkjdpfxozcrv Ue Aivsc Year of manufacture: 2020 Operating hours: 1,829 h Capacity: 2,000 kg Drive: 48 V Electric Equipment: Triplex mast Overall height 2,300 mm Fork positioner Side shift Working lights Solid tires This Linde E20PH-02 is in very good condition and offers the well-known Linde driving comfort and productivity. Equipped with a triplex mast, fork positioner and side shift, the truck is perfectly suited for warehouse and logistics applications. The low overall height of only 2,300 mm allows operation in buildings with restricted access heights. A charger can be supplied on request. Viewing and test drive possible by appointment. Side shift, fork positioner, 4th valve, partial cabin

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: A1/000156, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 16,000 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 300 mm, number of axes: 6, number of slots in tool magazine: 8, controller manufacturer: Routech- Quicklink, actuation type: electric, total height: 3,270 mm, total length: 32,100 mm, total width: 6,250 mm, overall weight: 21,000 kg, table length: 12,000 mm, table width: 1,000 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Routech OIKOS 12/19x1.25 – CNC 6-Axis Machining Center for Timber Construction For sale is a Routech OIKOS 12 CNC-controlled 6-axis machining center, designed for the precise processing of solid and laminated timber components for structural wood construction. This machine is suitable for the production of structural elements for single-family homes, hall construction, conservatories, carports, garden sheds, playground equipment, as well as general engineered timber construction. It enables complete processing of beams in a single pass – without the need for manual repositioning of the workpiece. Technical Specifications 6 interpolating CNC axes (X-Y-Z-B-C-A) Routech OIKOS 12 Max. workpiece length: 19,000 mm Max. cross-section: 1,250 x 300 mm Min. cross-section: 50 x 20 mm Max. workpiece weight: 1,250 kg (optionally up to 2,500 kg) Voltage: 400 V / 50 Hz Axis travel speeds: X: 107 m/min Y: 75 m/min Z: 28 m/min Rotary axes: A ±140° B ±180° C ±300° Milling Unit 6-axis special milling head TLT 1 (SCM Group) with: 13 kW continuous power (S1) Inverter power 18 kW Spindle speed up to 18,000 rpm HSK 63E tool holder Liquid cooling Processing in one pass: Milling, sawing, slotting, drilling, profiling, cross-cutting – all sides of the workpiece without re-clamping Tool change system Disc magazine “Rapid 8” with 8 tool positions Max. tool diameter: 360 mm Max. tool weight: 8 kg Additionally equipped with: Motorized saw unit Slotting unit with chain Preparation for adapter units Material Handling C-type buffer zone with 6 conveyor belts and 6 clamping chucks, length 13,500 mm Automatic unloading system 13,500 mm with 6 support beams Automatic waste conveyor for offcuts and chips Continuous processing of multiple workpieces possible. Control & Software CNC with PC Office ROUTECH QUICK-LINK user interface BTL data import from common CAD/CAM systems 3D simulation with collision check Restart after program interruption possible Separate simulation station “SIMOIKOS” for office workstation Safety & Equipment Enclosed safety cabin with Lexan viewing panel Photoelectric sensors at infeed and outfeed 2 extraction ports in the work area Godpfx Aeyu Upuoivjkc Air-conditioned control cabinet, CE compliant Summary The Routech OIKOS 12 is a high-performance CNC machining center for modern timber construction. With its 6-axis technology, high traverse speeds, complete 5-sided processing without re-clamping, and integrated material logistics, the machine is ideal for joineries and timber construction companies engaged in industrial production. Suitable for companies seeking precise, repeatable, and economical solutions for timber joinery processing.

Condition: new, Year of construction: 2026, The air filter for the ZP7500 sweeper is a key component of the filtration system, responsible for effectively capturing dust, fine particles, and small debris generated during operation. Its use significantly reduces airborne dust, resulting in improved operator comfort and a cleaner working environment. During sweeping, contaminants are not only collected by the brushes but also drawn into the machine along with air. The air filter ensures these particles are effectively trapped, preventing fine dust from being released back into the surroundings. In practice, this means more efficient and “dust-free” cleaning—especially important in warehouses, production halls, and enclosed spaces. Gksdpfx Aoyvp Tfjivec A large filtration surface area and properly structured filter material allow for the effective capture of even very fine particles. Modern sweepers often use panel filters, which offer high performance and ease of use—frequently equipped with shaking or cleaning systems that help maintain consistent efficiency. The filter also serves a protective function for the machine’s components—it prevents contaminants from entering the suction system and other working parts, reducing the risk of failure and extending the machine’s lifespan. An additional advantage is easy access and quick replacement, allowing the machine to be kept in optimal condition without unnecessary downtime. Regular inspection and cleaning of the filter are key to maintaining maximum sweeper performance. Key benefits: effective reduction of dust during operation improved air quality in the working environment high efficiency in filtering fine particles protection of machine components from contamination extended lifespan of the sweeper easy maintenance and quick replacement The air filter is an essential component for ZP7500 sweeper users who expect maximum cleaning efficiency while maintaining high comfort and safety—especially in dust-intensive environments.

Year of construction: 2026, condition: new, functionality: fully functional, load capacity per stand: 1,000 kg, Electronic rotary positioner with height adjustment via index hole pattern Rotary turner Rotary stand Rotary machine Available on request with your individual fixture. Product Description: Our moveFLEX solo combines maximum precision with optimal flexibility. The manually adjustable height, with an index hole pattern on both sides, allows you to easily adapt the working height to various requirements. The electric rotary axis provides smooth and precise rotation of the fixture. Thanks to integrated forklift pockets for safe transport by forklift, our moveFLEX solo is ideally suited for changing work environments. Application Area: Our moveFLEX solo is ideal for welding, assembly, and processing tasks, especially in applications requiring flexible and precise positioning. Suitable for use in covered, industrial halls with a temperature range of 10-40°C. Level, load-bearing hall floor with a maximum inclination of 1% is required. The moveFLEX solo should only be connected to a power source equipped with a compliant residual-current device (RCD), type B, rated for 30mA. Gkedpfx Aijyt Dp Ujvec Safety Devices: Emergency stop function at the control panel.

Condition: used, length 10 m width 5 m height of eaves 3 m The technical data is provided by the manufacturer or operator and is therefore non-binding for us. We reserve the right to prior sale; our terms and conditions of business and sale apply exclusively. Gjdpfxeyqvizj Aivekc About us: More than 400 of our own machines in stock Over 15,000 m² of warehouse space, 70-ton crane capacity More than 10,000 accessories for your workshop If you want to sell machinery, production lines, or your business, please contact us. Further offers can be found on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: like new (used), Year of construction: 2017, functionality: fully functional, 2 units of recirculating air chamber furnaces, fast heating times, short process times, electric, 12-month warranty, available for immediate delivery. - Temperature 200°C, can be increased to 250°C! Gsdpjy Tkfwofx Aivekc - Charging car, 5 units available, modification on request. - Homogeneous temperature distribution of +/- 10°C. - Internal dimensions (W x D x H): 3750 x 1400 x 2300 mm - External dimensions (W x D x H): 4850 x 1705 x 3880 mm - Usable volume: 11.6 m³ - Control system: S!MPAC with touch panel - Program execution with a good sensor as a cascade control system - Temperature limiter - Signal tower - Directly accessible, with grid rails - Exhaust air volume flow: 140 m³/min - Electromagnetic door locking system - Rated power: 180 kW - Connection power: 241 kW!! - Weight: approx. 3500 kg - Documentation, CE declaration of conformity We would be pleased to offer transport, installation, and training for your employees. Inspection in our machine hall is possible at any time by appointment. Furnace, Oven, Furnaces, Drying oven, Industrial oven, Drying cabinet, Heat oven, Heat cabinet, Recirculating air oven, Chamber oven, Heating oven, Chamber recirculating air oven, Tempering oven, Temperature oven, Recirculating air chamber oven, Hardening oven, Vötsch oven, Weisstechnik, Fusing oven, Curing oven, Post-curing of liquid crystal windows, CFRP support structure, Oven for glass, Glass tempering oven, Glass fusing oven, Glass hardening oven, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Condition: excellent (used), functionality: fully functional, Year of construction: 1992, operating hours: 1,322 h, CLARK TM 15 N | Electric front forklift, 3-wheel forklift with a KAUP positioning system/rotator Manufacturer: CLARK Gedpfx Aszagpqjivskc Model/Type: TM 15 N Serial number: TM145 5970 GEF 7000 Year of manufacture: 1992 Power source: 48 V battery Forklift weight without battery: 2160 kg Battery weight: min. 710 kg / max. 760 kg Rated load capacity: 1500 kg at a center of gravity of 500 mm Maximum lifting height: 3070 mm Operating hours: 1322 engine hours Hydraulic fork positioner / rotating clamp Brand: KAUP Type: 1.5T401D Year of manufacture: 1994 Attachment load capacity: 2000 kg / as a clamp 1250 kg Maximum pressure: 150 bar Attachment weight: 345 kg Charger included: Intelligent pulse charger Brand: MIDAC MIDATRON HF-S 48-130T Charger power supply: 3x400 V, 50-60 Hz, 12.1 A Maximum protection: 16 A, Output: 48 V / 130 A The Clark TM 15 N, a three-wheel electric forklift, is a compact and highly maneuverable lifting machine designed for intensive operation inside warehouses, production halls, and cold storage facilities. Thanks to its low profile and a design based on a single steerable rear wheel, the forklift can turn virtually on the spot. This feature makes it an ideal solution for the food, processing, bottling, and large-scale catering sectors, where maneuvering space between shelves or production lines is severely limited. A key advantage of this unit is its factory-installed, advanced hydraulic attachment from the German brand KAUP (clamp fork). It allows the operator to automatically and smoothly adjust the fork spacing directly from the cabin within a maximum width of 1700 mm and a fork length of 1200 mm. This function, combined with the clamping option, enables the safe transport of crates, pallets with non-standard dimensions, and bulk containers (e.g., crate pallets with vegetables or fruit). The 48 V electric drive ensures zero emissions, which is an absolute requirement for the machine to be used in a food environment and to meet sanitary standards.

Year of construction: 1989, condition: excellent (used), functionality: fully functional, LEUSHUIS 3500L | Vertical process tank for mayonnaise and sauces Manufacturer: Leushuis Apparatenbouw B.V. Type: Vertical storage and process tank with a conical bottom Factory number: A-32058-3007 H-4 Year of manufacture: 1989 Capacity: 3500 liters Intended medium: Salad mayonnaise, thick emulsions, sauces Hydrostatic test pressure: 0.9 bar Design temperature: 50 °C Weight of empty tank: 425 kg Overall dimensions: Ø 2000 mm x 3600 mm Gkjdpfx Ajy Umxcoivjc This professional, vertical storage and process tank from the Dutch brand Leushuis has a capacity of 3500 liters and is a high-quality component for production lines, designed for advanced food processing. The unit was factory-designed and approved for handling salad mayonnaise (Salatmayonnaise), making it an ideal solution for storing, buffering, and transferring various demanding, thick fatty emulsions, cold sauces, ketchup, mustard, jams, or liquid concentrates. The tank features an optimized, compact design (diameter 2000 mm, height 3600 mm), which ensures excellent stability and simplifies installation in halls with lower ceilings, while maintaining a large storage volume. Its construction entirely from high-quality stainless steel guarantees complete microbiological and chemical neutrality – the tank does not react with products with low pH (acidic reaction of sauces) and does not affect the organoleptic properties of the ingredients. The design parameters allow for safe operation with media at temperatures up to 50 °C, which enables the acceptance of products directly after pasteurization, blending, or emulsification processes.

Condition: new, Year of construction: 2026, ZP3000 Battery-Powered Sweeper The modern ZP3000 battery-powered sweeper is designed for intensive cleaning and maintenance of warehouses, industrial facilities, logistics centres, car parks and outdoor areas. With a cleaning performance of up to 4,500 m²/h, the ZP3000 combines efficiency, operator comfort and low operating costs, ensuring thorough removal of dust, dirt, leaves and small debris. The ZP3000 electric sweeper has been developed for the most demanding environments. Its robust construction, durable side and main brushes, and spacious 35-litre waste container allow large areas to be swept quickly and efficiently. Intuitive controls provide excellent operator comfort, even during long working periods, while the battery-powered drive ensures quiet and environmentally friendly operation, making the machine ideal for both indoor and outdoor use. Thanks to its water spray system, the ZP3000 enables simultaneous sweeping, vacuuming and light surface washing. The 105 cm working width and two 45 cm side brushes allow thorough cleaning of even hard-to-reach corners and edges. Using this machine helps reduce cleaning and maintenance costs while maintaining high standards of hygiene. Key Features of the ZP3000 Sweeper Cleaning performance: up to 4,500 m²/h – fast and efficient cleaning of large areas. Battery-powered drive: cable-free and emission-free operation that is quiet and environmentally friendly. Working width: 105 cm – a wide cleaning path for efficient operation. Main and side brushes: 2 side brushes, 45 cm each, for precise cleaning along edges and in corners. Waste container: 35 litres – fewer interruptions and increased productivity. Dust suction and water spray system: more effective removal of dust and light dirt. Ergonomics and safety: stable construction and easy operation. Versatile applications: warehouses, production halls, logistics centres, car parks and commercial facilities. Why Choose the ZP3000? With the ZP3000 battery-powered sweeper, maintaining cleanliness in warehouses, industrial halls and other facilities is fast, efficient and hassle-free. This self-propelled sweeping machine effectively removes dust, dirt, leaves and small debris, minimising the time required for cleaning. The ZP3000 electric sweeper with a water spray system is an ideal solution for companies that value efficiency, ergonomics and environmentally friendly operation. The machine operates quietly and without exhaust emissions, while its 105 cm working width and two 45 cm side brushes ensure thorough cleaning, even in hard-to-reach areas. The ZP3000 is a reliable solution for professional cleaning and maintenance – from production halls and warehouses to outdoor areas and logistics centres. Applications of the ZP3000 Sweeper Production halls and warehouses, Logistics and distribution centres, Commercial facilities and large retail stores, All areas requiring efficient, emission-free cleaning. Technical Specifications Sweeping width 1050 mm Cylindrical brush width 435 mm Side brush width 300 mm Gkodpfx Aeyufwvoivoc Waste container capacity 35 l Operating time 3–4 h Cleaning performance 4,500 m²/h Battery 12 V / 100 Ah Main brush motor power 200 W Side brush motor power 90 W × 2 Driving speed 0–8 km/h Dimensions 1080 × 1050 × 1080 mm Weight 90 kg

Condition: new, working width: 610 mm, area performance: 2,745 m²/h, overall weight: 208 kg, warranty duration: 12 months, water tank capacity: 55 l, I-DRIVE 65 PROFESSIONAL FLOOR SCRUBBERS - 2745m²/h TECHNICAL DATA: Model: I-Drive 65 Type: Compact Scrubber Series: Professional Condition: NEW Wheel Drive: Yes Battery Charger Included: Yes Power Supply: Battery Battery Type: 6 i-power 14 Batteries Number of Brushes Included (pcs): 2 Brush Working Width (mm): 610 Squeegee Working Width (mm): 790 Water Tank: Clean / Dirty (l): 55 / 55 Theoretical Area Performance (m²/h): 2745 Weight (kg): 208 I-MOP LITE PROFESSIONAL FLOOR SCRUBBERS FLOORS - 1400m²/h TECHNICAL DATA: Model: I-Mop Lite Type: Compact scrubber Series: Professional Condition: NEW Charger included: Yes Power supply: battery Battery type: i-power 12: 18 V, 12 Ah Number of brushes included (pcs): 2 Brush working width (mm): 370 Squeegee working width (mm): 370 Water tank: clean / dirty (l): 3 / 3 Gjdpezkr Dtsfx Aivekc Theoretical surface efficiency (m²/h): 1400 Weight (kg): 16.8 WHY CHOOSE THE I-DRIVE 65 + I-MOP LITE SCRUBBERS The combination of the I-Drive 65 and the I-Mop Lite is a concept developed by I-Team. A 2-in-1 solution – an efficient ride-on scrubber for large areas with the ability to immediately use the compact I-Mop for thorough cleaning in areas inaccessible with a traditional machine. This allows a single operator to thoroughly clean the entire facility without having to change equipment. One machine for multiple surfaces – the I-Drive 65 effectively cleans large, open spaces such as halls, warehouses, shopping malls, and airports. When narrow passages, corners, or under furniture need cleaning, the operator simply removes the I-Mop Lite from the rear handle and continues working without changing positions. ADVANTAGES OF THE I-DRIVE 65 Easy to use - Clear icons and a simple control panel. One-button activation of the brushes and suction system. Automatic fill system - Stops at the fill line, preventing water from splashing or dripping into the battery compartments. Hidden safe - For storing a wallet or phone. Adjustable foot pedal - Easily adjust settings to suit operator preferences. Clear front view while driving. Easy squeegee removal with the push of a button. The ramp can be quickly assembled for loading and unloading. I-MOP LITE BENEFITS Easy to use - Only 4 buttons, no training required. Super lightweight - Improved ergonomics and increased job satisfaction for cleaners. Microban® antibacterial tank - Prevents bacterial growth for long-lasting hygiene and protection. No trip hazard - Operates on portable lithium batteries instead of a long cord. Brushless motor - Low noise and longer runtime. Efficient cleaning of all hard floor surfaces - 500 RPM high-speed brushes.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12389, Equipment: documentation/manual, We are offering this used FAT T1 regeneration system, manufactured in 2013. 1. Brief Description For sale is a thermal sand regeneration system from the German manufacturer FAT Förder- und Anlagentechnik GmbH. The system is currently in operation and is being sold solely due to a capacity expansion at the site. The sale is not due to any technical or economic deficiencies. The system has only been operated in a production hall and is in very good technical and visual condition. 2. Technical Data Manufacturer: FAT Förder- und Anlagentechnik GmbH Type: T1 Factory Number: 12389 Year of Manufacture: 2013 Fuel: Natural Gas Thermal Output: 350 kW Regeneration Temperature: approx. 850 °C Throughput: approx. 850 to 1,300 kg/h Sand System: PEP-SET / Cold Resin Systems Volatilization Loss: up to approx. 0.1% Installation: Production Hall Availability: Dismantling from mid-September 2026 3. Scope of Supply The scope of supply includes:  Frequency-controlled sand dosing via screw conveyor  Sieve  Magnetic Separator  Thermal Regeneration Furnace  Cooler Sand/Air Cooler (Recuperation) Air/Water Cooler Chilling Unit  Control Cabinet  PLC Control  Electrical Equipment  Pneumatic Components  Original FAT Documentation Not included in the scope of supply:  Dust extraction system, as it is connected to a central extraction system  Sand conveyor after the cooler The system is currently connected to the existing central dust extraction system of the plant. 4. Performance Features The system was designed for the regeneration of chemically bonded molding materials and achieves excellent regeneration results. Special Features:  Volatilization loss up to approx. 0.1%  High regenerant quality  Economical natural gas operation  Robust FAT construction  Proven industrial continuous operation  Complete technical documentation available 5. Documentation Scope Gkodpfx Aezhvagsivoc The following documents are complete:  Operating Instructions  Maintenance Instructions  Circuit Diagrams  Pneumatic Diagrams  Installation Plans  Layout Drawings  Water Installation Plans  FAT Construction Drawings  Technical Documentation (2 folders) + Switchgear Planning The completeness of the documentation has been verified. 6. System Condition The system is in continuous production operation until dismantling. Advantages for the buyer:  Functional demonstration possible during operation  Inspection possible by appointment  Documented system condition  Weather-protected hall installation  Weather-independent dismantling and loading 7. Dismantling and Availability Dismantling is expected to be possible from mid-September 2026. The system is located inside a production hall and is very easily accessible for dismantling and loading operations. 8. Reason for Sale The system is being sold solely due to a capacity expansion at the production site. The existing system meets all technical requirements and is in functional condition. 9. Inspection Inspections and functional demonstrations are possible by prior appointment. Qualified interested parties will be provided with further technical documents, drawings and photo documentation upon request. If you have any questions or require further information, please send us a message or call us.

Condition: used, mileage: 43,000 km, power: 100 kW (135.96 HP), first registration: 11/2001, fuel type: diesel, overall weight: 7,490 kg, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space width: 2,500 mm, Year of construction: 2000, Equipment: ABS, crane, electronic stability program (ESP), Int. No.: 127 Cormach 23000tech articulated crane on IVECO chassis * Iveco * ML 75 * 4x2 wheel configuration * Permissible weight 7490 kg * CRANE Cormach 23000tech * WINCH * REMOTE CONTROL * 4x hydraulic outriggers * Hook height approx. 30 m * Max. lifting capacity 1500 kg * REMOTE CONTROL * Leaf/leaf spring suspension * Manual transmission * Lateral reach, see load chart * Good condition * Approved as a self-propelled working machine * EXEMPT FROM ENVIRONMENTAL ZONES, TOLLS, AND VEHICLE TAX * Tires 80% * VAT can be shown Gkjdpszkxrwefx Aivoc Trade-in possible Financing from 4.99% Errors and prior sale excepted! The information in this advertisement is a non-binding description and does not constitute guaranteed characteristics. The seller assumes no liability for typing and data transmission errors. Listed equipment must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany upon request Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m. Friday from 9:00 a.m. to 2:00 p.m. and by appointment!