Used Mobile Lackierbox for sale (6,261)

Condition: new, Year of construction: 2025, Raw air extractor ASA 141 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 140 mm Csdjhk S Swopfx Abbjhf Length approx. 1062 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 230 V Mains frequency 50 Hz Filter Filter area 1.9 m² Noise emission Sound pressure level max. 78 dB(A) Volume flow Nominal volume flow 1650 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: used, Year of construction: 2022, operating hours: 2,380 h, functionality: fully functional, Base package AK 315: Central axle trailer chassis with 2 axles, road approval for 80 km/h Braking system incl. EBS and lighting according to EU directive Tyres: 385/65 R22.5 50 mm EU drawbar eye including slip-on shoe Hydraulically adjustable support leg Splash guard (internal and lateral mudguards) Permissible total weight: 16,000 kg MTU diesel engine 6R 1000, 230 kW at 2,200 rpm, complies with EUROMOT V emissions standard Load-dependent feed control incl. automatic scraper floor reversal Hydraulically folding green waste grid basket with rear tailgate Impact plate with teeth Fuel tank: 300 litres Feed roller: Length 1,420 mm, diameter 510 mm, with mounted tooth segments Double-row flail drum with 16 free-swinging cast steel flail holders, replaceable flail tips, and 28 fixed ripping teeth Standard: “Streusel plus” flail tip Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raise/lower support leg, open/close rear basket, fold/unfold rear conveyor, release travel drive) when engine is off 24-V electrical control Separate control box at the rear of the machine Scraper floor with 29 slats Chain drive feed roller and scraper floor Extended radio remote control with 2 foot switches Acoustic start-up warning Rear conveyor: 6 m, 1,500 mm wide with anti-magnetic center section Reinforcement plates (Hardox) on both sides of the feed hopper for the side walls (loading edge) Travel drive preparation Fire extinguisher Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic travel drive Extended radio remote control with foot switch Cedpfx Asxx Sdpebbshf “Bear Claw” flail tips Fine-shredding basket Watering system Lighting package: engine compartment and rear conveyor Delivery date by arrangement

Condition: used, Year of construction: 2014, operating hours: 9,771 h, Equipment: all wheel drive, Compact mobile excavator, articulated boom, hydraulic adjustable boom, grapple and hammer device, dozer blade, claw support, air conditioning, hydraulic quick-change system, 1500mm bucket, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this object. Chodpevnm H Uofx Abbef Please contact us!

Condition: used, mileage: 226,800 km, power: 205 kW (278.72 HP), overall weight: 18,000 kg, fuel type: diesel, color: green, axle configuration: 4x2, Year of construction: 2005, Two-way tipper truck with crane Chassis: Mercedes-Benz Axor 1828 4x2 Registration: 04/2005 Approx. 226,800 km MOT: expired 04/25 Service: expired EURO 4 (DPF PMK2 retrofitted) Switch Webasto auxiliary heater Body: Meiller two-way tipper Cjdpjw Aw Ahsfx Abbshf Rear crane: Atlas 95.2 HDS – A12, built in 2012 Maul trailer hitch Rearview camera Subject to changes, errors, and prior sale. Viewing only by appointment.

Condition: good (used), Year of construction: 2012, Year of manufacture: 2012 Technical condition: good Chedpfx Abswx Ercsbsf Visual condition: good Please contact Joeri Celen or August Celen for further information.

Condition: used, mileage: 309,129 km, power: 103 kW (140.04 HP), first registration: 04/2016, overall weight: 3,200 kg, fuel type: diesel, color: white, gearing type: automatic, emission class: euro5, Year of construction: 2016, number of seats: 2, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Equipment: * Body version: L2 high-roof ambulance/transport van superstructure, * Manufacturer: Ambulanz Mobile Hornis conversion, * Roof-mounted integrated blue lights, * Front LED flashers in the radiator grille, * 230V external power connection, Codpfx Absq Silusbjhf * Stretcher table TL2014, * Folding attendant seat to the right of the stretcher table and at the front-end panel, * Load control panel, * Track for a carry chair, * Various storage options and compartments, * Mountings for emergency cases, * Air conditioning, * Auxiliary heater (stand heating), * Automatic transmission, * Fuel tank: 80 litres, * Additional heater, * Heat-insulating glazing, Technology: * Composition Audio sound system, * SD card interface, MP3 playback function, * Electric package 1, * Bluetooth mobile phone interface, * Second battery, * Central locking with remote control, * Adjustable steering column (steering wheel), Safety/Environment: * Driver/passenger airbags, * Driver assistance system: Brake Assist (HBA), * Driver assistance system: Multi-collision brake, * Low-emission in accordance with Euro 5 emission standard, * Start/Stop engine system, Other: * German first delivery, * 1 previous owner, * Wheelbase 3,400 mm, * Permissible gross weight 3.20 t Since 1972, your reliable partner for commercial vehicles in 28832 Achim, at Bremer Kreuz. NutzfahrzeugZentrum Behnke always stocks around 200 vehicles from the sectors of vans, commercial vehicles, and construction machinery! We continually offer you attractive financing options at favourable special rates. If interested, we are happy to prepare an individual offer for you! We welcome trade-ins of your commercial vehicle/construction machine. If a new TÜV inspection is desired, we are pleased to provide a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your “new” commercial vehicle is possible by our external partners for an additional fee. The details provided in advertisements, online listings, price tags, and images are non-binding descriptions and do not constitute guaranteed characteristics. The seller accepts no liability/warranty for typographical or data transmission errors. Listed equipment features must be checked individually if required. Subject to prior sale and errors.

Condition: new, Year of construction: 2024, Description High quality galvanized steel housing Powerful, economical engines Standard optional intake connection at top or bottom Uniform filter bags for all variants Discharge in chip tons The modular models of the AL-KO AAS series are available in optimally matched performance categories with energy-saving and quiet motors that drive the fan on the raw air side and thus generate particularly effective overpressure filtering. Durable quality components and an all-metal housing made of galvanized sheet steel give you investment security as well as the many retrofit options. The particularly favourable price and short installation times also contribute to the fact that the AL-KO AAS is definitely the right choice. Technical data AL-KO AAS 3013 Suction port 200 mm Chedpjfc A Urjfx Abbsf Nominal capacity 2.500m³/h Maximum volume flow 3.300m³/h Maximum negative pressure 2,700 Pa Filter area 3 x 2.2 m² Chip collection volume 3 x 175 litres Engine power 3.0 kW / 400 V Dimensions (LxWxH). 2486 x 578 x 2115 mm Weight: 139 kg

Condition: used, Year of construction: 2023, operating hours: 119 h, functionality: fully functional, Basic Package Inventhor Type 6 Load-sensing system 500-liter fuel tank Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally arranged wear strips 24 V electrical control – additional electric pump to operate the following functions when the engine is off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional Equipment: 260 kW power train – EV 3-axle drawbar chassis unit Shredding system Size L – 20 teeth Auxiliary hydraulic connections 35–80 l/min Hydrostatic drive Hopper extension 350 mm, watering device both sides 7 m rear conveyor belt Overband magnet – Neodymium Frame for 7 m overband magnet Cedoxx Sbnjpfx Abbjhf Delivery date to be agreed

Condition: used, Year of construction: 2011, operating hours: 10,825 h, Equipment: all wheel drive, Adjustable boom, stick approx. 2450 mm, quick coupler system SW48, 800 mm digging bucket, grab and hammer equipment, central lubrication system, air conditioning, rear-view camera, last inspection at 9970 operating hours, good condition, vehicle may be stickered and/or labeled with advertising. Chjdpfx Abexnhimebof Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will be pleased to provide you with a quotation from our partner workshops! Vehicle may be stickered and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. We will gladly prepare a financing or leasing offer for this unit. Please contact us!

Condition: excellent (used), functionality: fully functional, overall weight: 40 kg, pressure (max.): 8 bar, Year of construction: 2012, Mobile compressor Manufacturer: EINHELL Type: BT-AC 400/50 Year of manufacture: 2012 Machine No.: 2012/07/EB039883 Tank 50 liters / 8 bar pressure capacity Motor 230 V / 50 Hz, 2.6 kW S2 30 / min. 2.4 kW S1 IP 20 Color blue Chsdpfxjwn Dwvj Abbof

Condition: like new (used), Pneumatic meat bin lift Lift is designed for loading the product placed in 200 l meat bins (type U-200) Material: Stainless Steel Model: 200 liter Unloading height: 1.240 mm Capacity: 200 liter or 300 liter Csdpfx Aeinup Dobbohf Dimensions (LxWxH): 1.800x900x1.930 mm Weight: 250 kg.

Condition: used, mileage: 318,767 km, power: 120 kW (163.15 HP), first registration: 10/2012, overall weight: 3,880 kg, fuel type: diesel, color: yellow, axle configuration: 4x2, maximum load weight: 535 kg, empty load weight: 3,345 kg, next inspection (TÜV): 02/2023, wheelbase: 3,650 mm, brakes: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space width: 1,600 mm, loading space length: 3,200 mm, loading space height: 1,950 mm, number of seats: 4, Equipment: ABS, air conditioning, airbag, cabin, central locking, fog lights, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, * German vehicle * Condition see photos * Ambulance Mobile ambulance * Type: Delfis - Ergonomic in the smallest space and at the highest level * Hydrosodt Air carrying table electrically adjustable * Extendable loading ramp for wheelchair * Restraint system for wheelchair * Oxygen and suction system prepared Cedpfx Asvhpq Nebbshf * Air conditioning and auxiliary heating in the passenger compartment * 220 volt sockets * 2 attendant seats * Lockable ampoule cabinet * Pull-out cabinet * Various shelves and drawers * Sliding door on the right with sliding window and step * Sliding door on the left * 270° rear wing doors with step * Rear axle with air suspension * Partition wall with sliding window * Height-adjustable driver + front passenger seat with armrests * Air conditioning * Reversing camera * Heated seats * Airbag driver/passenger side * Electric windows * Heated electric mirrors * Radio CD + loudspeakers in the passenger compartment * Xenon headlights * ABS and ASR * Central locking with remote control * Automatic transmission * Signal system * Working lights * Third brake light * Body dimensions: L=3,200 x W=1,600 x H=1,950 mm * Wheelbase: 3,600 mm * GVW: 3,880 kg * Unladen weight: 3,345 kg * For sales to tradesmen and for export (non-EU and EU), the German merchant rules apply. If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Condition: excellent (used), Here we offer you a FRT MicroSpy Mobile. Device name: FRT MicroSpy Mobile Art. No. MSP 105 00 Device number: MSP1033 FRT MicroSpy Mobile Portable optical profilometer for non-destructive 3D surface measurements directly on the component. The portability of the MicroSpy Mobile makes it ideal for mobile use on heavy machinery, vehicles, rollers, glass, etc. machines, vehicles, rollers, glass panes or other large components. High-resolution and non-destructive measurements of important surface characteristics such as roughness, contour, topography, layer thickness, wear, contact ratio or volume. Smaller samples can be measured directly on the measuring table Can be used on large components and machines Excellent resolution values Excellent reproducibility Non-destructive measurement Handles and adjustable support feet Low weight (approx. 5 kg) FRT Technical Specifications: Device: MicroSpy Mobile xy-relief 50 x 50 mm² xy-table Type: compact XY cross table with open frame Bearing: mechanical cross roller guide Cjdpfx Abeg Sr D Hsbehf Drive: DC motor with recirculating ball screw Travel (measuring range XY): 50 x 50 mm² (or 20 x 20 mm² with CWL 3mm) Position measuring system: Rotary encoder Measuring system resolution: 0.25 µm Repeat accuracy XY: < ± 1 µm Table runout (per axis): < 2 µm / 50 mm of which not reproducible ): < 0.5 µm perpendicularity XY: < 4 µm / 50 mm z-axis, motorized: Type Position r Drive Travel Position measuring system Measuring system resolution Rope sc

Condition: used, Year of construction: 2018, operating hours: 6,031 h, functionality: fully functional, Basic Package SM620 Plus: Central axle trailer chassis with 2 axles, 80 km/h EU road approval Braking system including ABS and lighting according to EU directive 50 mm EU towing eye, incl. mounting shoe Hydraulically adjustable support legs at the front on both sides and rear right Splash protection (inner and side mudguards) Tyres 435/50 R19.5 Permissible total weight 19,000 kg Deutz diesel engine TCD 3.6 L4, 85 kW at 1,800 rpm, compliant with emission standard EUROMOT TIER IV Final Hydraulically reversible fan at water and oil cooler Complete engine unit can be swung out Fuel tank 300 litres Feed hopper 5.0 m³ capacity Stone grid preparation Hydraulically folding side conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulically folding rear conveyor: belt length 5,500 mm, belt width 1,000 mm Hydraulic support cylinder between side and rear conveyor Emergency stop switches at side and rear conveyors Load-dependent material feed from conveyor floor to screening drum Continuously variable screening drum speed from 0 - 20 rpm Continuously variable hopper belt speed from 0 - 0.17 m/s Control box at the rear of the machine with the following functions: emergency stop switch, folding/retracting the rear conveyor, folding/retracting the side conveyor, side conveyor inclination and load control +/-, automatic mode on/off From the operator panel: fold/unfold side conveyor Hydraulically folding cleaning brush with individual brush segments and spring tines Centrally arranged wear strips 24 V electric control Underrun protection rear Side collision guard front (reinforced version) and rear both sides Hydraulic quick coupling between rear conveyor and machine Acoustic start-up warning, door monitoring Doppstadt telematics system Paintwork: RAL2011 deep orange Basic version without screening drum Cedpfx Ajxx R Rhsbbjhf Optional equipment: Flow divider on rear conveyor Delivery date by arrangement

Condition: used, Year of construction: 2018, operating hours: 7,210 h, Equipment: all wheel drive, First use May 2018, prepared for Leica Geosystems, OilQuick OQ70/55 pro change system, hammer control, gripper control, reversing camera, central lubrication system, good condition, vehicle can be covered with advertising and/or labeled Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Chsdevnqh Aspfx Abbsf Please contact us!

Condition: used, Year of construction: 2017, operating hours: 9,979 h, Liebherr A914 Compact mobile excavator from year 2017 with only 9,979 operating hours! ----* Manufacturer: Liebherr * Model: A914 Compact * Year of manufacture: 2017 * Recorded operating hours: approx. 9,979 * Including Oil Quick OQ65 SH quick coupler * German machine, first-hand * Including 1 x digging bucket * CE declaration + operating permit available * Good condition * ZSA * More photos and video on request * Price: €59,900, net + 19% VAT. ----For further questions, please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp Cjdpsx Dpyxsfx Abbehf All details without guarantee or warranty, errors and prior sale excepted.

Condition: used, lifting height: 30,500 mm, Year of construction: 2018, operating hours: 2,376 h, Drivetrain Drive: Wheel Weights Empty weight: 13.700 kg Functional Lifting capacity: 15.500 kg Chodoxwi Shspfx Abbof Identification Serial number: AMC3588 Other information Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Counterweight: 0 Transport dimensions (LxWxH): 5.83x1.84x2.83 Additional information Please contact PFEIFER GROUP for more information

Condition: excellent (used), Here we offer a used Datona mobile sandblasting unit. Datona mobile sandblasting unit DUO - 74 liters SKU DT-55212 Advantages and disadvantages: 2.5 m long hose for a long reach Easy to switch between blasting agents thanks to the mixing valve When using soda, the surface of the workpiece is not damaged Description: This mobile sandblasting machine is used for removing paint and rust. Thanks to the two boilers, you can choose from two different blasting media. The mobile sandblasting unit works with a pressure of 4 to 8 bar and requires a compressor with a suction capacity of at least 350 l/min. Double boiler: If blasting with soda or calcium carbonate does not achieve the desired result, simply try a different blasting agent. For a more effective effect, it is also possible to use both blasting agents at the same time. With the sandblaster, you have a practical machine in your home. With the help of the special mixing valve, you can use soda to easily and gently remove paint from steel, stainless steel, chrome, aluminum or polyester. A major advantage of blasting with fine soda is that the surface of the object to be of the object to be blasted is not damaged. You don't even have to remove rubber seals, chrome parts or glass. This saves a lot of time! The mobile sandblasting unit can be used both in the workshop as well as on site. Attention: The one boiler is only suitable for soda and calcium carbonate!!! ✓ Duo sandblasting unit ✓ 74 liter boiler capacity ✓ Air consumption is around 350 l/min Technical data: SKU DT-55212 Weight 33 kg Suitable blasting material Aluminum silicate Dato-Blast calcium carbonate soda Blasting cabinet connection 1/4" Max. Pressure 2 - 6 bar Minimum air consumption 350 l/min Min. compressor tank capacity 100 liters Type: DT-55212 Chsdeqcuvwspfx Abbsf Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Year of construction: 2024, operating hours: 630 h, functionality: fully functional, Basic package AK565 Plus: MTU diesel engine 6R1300, 390 kW at 2,000 rpm, EUROMOT V compliant Central axle trailer chassis with 3 axles, road approval for 80 km/h Braking system incl. EBS and lighting according to EC directive 50 mm EC towing eye incl. slip-on shoe Tires: 435/50 R 19.5 Hydraulically adjustable support leg Splash guards (internal and side fenders) Permissible total weight: 22,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, meets EUROMOT V emission standard Exhaust air directed upwards Load-dependent material feed control incl. automatic reversing of the scraper floor Csdpfx Aboxx R Akjbjhf Fuel tank: 600 liters Feed roller: length 1,690 mm, diameter 510 mm, with fitted tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable "Dopplock" flail tips Standard: "Streusel plus" flail tip Impact plate with teeth Centrally positioned lubrication strips Electric pump for cylinder functions (e.g. raising/lowering support leg and opening/closing rear hood, folding in/out discharge conveyor, releasing drive) when engine is off 24 V electric control system Separate control box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Separate drive for feed roller / scraper floor - "Twin Drive" Rear discharge conveyor with anti-magnetic center piece - belt length 6,000 mm, belt width 1,800 mm, discharge height 4.2 m – height adjustable Underbelt - belt length 1,400 mm, belt width 1,750 mm Extended radio remote control with 2 foot switches Drive system preparation Reinforcement plates for the intake hopper (material: Hardox), both sides for side wall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Hydraulic drive system Additional hydraulic connection 20 l/min "Bear Paw" flail tips Impact plate with strike bar and tooth row Neodymium magnetic roller incl. chute NEODYM overband magnet for rear discharge conveyor Frame for overband magnet Moistening system LED lighting package: engine compartment and rear discharge conveyor Delivery date by arrangement

Condition: used, Year of construction: 1998, Lifting capacity: 70.000 kg Serial number: SC070-1318 Cedpfsxwi R Rex Abbehf Front tyres / undercarriage remaining: 0 Rear tyres remaining : 0 Tyre brand: - Carrier engine: - Counterweight: 0 Transport dimensions (LxWxH): 0x3.18x3.12 Please contact PFEIFER GROUP for more information

Condition: excellent (used), Here we offer you a welding fume filter. Welding or soldering fumes are filtered by the SRF-K series with a separation efficiency of 99.9 % and then then returned to the work area. Due to the high air volume flow, even larger smoke clouds can be extracted effortlessly. The cleanable permanent filter cartridges ensure permanently low operating costs. Supply voltage (V) 230 Drive power (kW) 1.3 Back-up fuse (A) 16 Rated frequency (Hz) 50 Operating mode S3 Connection ø (mm) 140 Sound pressure level max. (LpA) 72 Filter area (m²) 18 Number of filter elements (pieces) 1 Negative pressure max. (Pa) 2,800 Air flow rate max. (m³/h) 950 Codpfx Aen Armaobbohf Weight (kg) 69 Dimensions (L x W x H) (mm) 946 x 761 x 1,361 Protection class IP 54 Year of manufacture: 2014 Type: SRF K-10 FM IFA W2 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: used, Year of construction: 2023, operating hours: 2,798 h, functionality: fully functional, Basic Package AK 640 SA: Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting in accordance with EU regulations Tires: 385/65 R22.5 Gross vehicle weight 32,000 kg Hydraulically adjustable support legs Splash guards (inner and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, compliant with EUROMOT V emission standard Auxiliary hydraulic connection 20 l/min Load-dependent feed control incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank: 2 x 450 liters Feed roller: length 1,690 mm, diameter 510 mm, with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: 'Streusel plus' flail tip Impact plate with teeth Centrally arranged wear strips Electric pump for cylinder functions (e.g. lifting/lowering support legs and opening/closing rear basket, folding/unfolding rear conveyor, disengaging drive) when engine is off 24V electrical system Separate switch box at the rear of the machine Hydraulically folding fine shredding basket "Multimesh" (mesh size between 30 - 280 mm, gradations on request), incl. one-piece rear flap Rear discharge conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic center section Lower conveyor: belt length 3,800 mm, belt width 1,400 mm Engine compartment protection plate (material: Hardox) Moistening system for external water connection Scraper floor with 71 slats Wear protection in drum area Reinforcement plates on both sides of the feed hopper (made of wear-resistant steel) Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Codpfxoxx Rrro Abbehf Optional Equipment: Hydraulic drive Fine shredding basket Scraper floor chain lubrication Lighting package: engine compartment and rear conveyor LED lighting package (scraper floor and infeed) 'Bear Paw' flail tips Delivery date by arrangement Available from 04/2026

Condition: used, Year of construction: 2023, operating hours: 1,400 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear strips 24V electric control – additional electric pump for operation of the following functions with the engine switched off: Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Maintenance-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Optional equipment: Chodpfxsxx Rlfe Abbof 260 kW drive train – electric version 400 mm track undercarriage Size L shredding system – 20 teeth Size L limiter Auxiliary hydraulic connections 35 – 80 l/min 7 m rear conveyor Neodymium overbelt magnet Frame for 7 m overbelt magnet Hopper extension 350 mm, water spray unit on both sides Delivery date by arrangement

Condition: used, Year of construction: 2022, operating hours: 3,000 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear/slide strips 24-V electric control system – additional electric pump enables the following functions with engine off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Service-friendly engine compartment LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided load protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Painting: RAL2011 deep orange Optional equipment: Driveline 310 kW – EV 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connections 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet Neodymium Frame for 7 m overband magnet Central lubrication system Custom paint finish in RAL Codpexx N T Ijfx Abbjhf Delivery date to be arranged

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder Cedpfxsxx N Dgj Abbjhf - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement