Used Mobile Column Lifts for sale (31,328)

Condition: used, mileage: 47,155 km, first registration: 03/2007, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x4, fuel: diesel, suspension: steel, total length: 12,010 mm, total width: 2,550 mm, Year of construction: 2007, Equipment: air conditioning, crane, = Additional options and accessories = - Leaf suspension = Further information = Axle configuration Front axle 1: Tire size: 385/65R22.5; Steered; Tire tread left: 50%; Tire tread right: 50%; Suspension: leaf suspension Front axle 2: Tire size: 385/65R22.5; Steered; Tire tread left: 50%; Tire tread right: 50%; Suspension: leaf suspension Rear axle 1: Tire size: 315/80R22.5; Twin tires; Inner left tread: 50%; Outer left tread: 50%; Inner right tread: 50%; Outer right tread: 50% Rear axle 2: Tire size: 315/80R22.5; Twin tires; Inner left tread: 50%; Outer left tread: 50%; Inner right tread: 50%; Outer right tread: 50% Weights Unladen weight: 41,850 kg Payload: 150 kg Gross Vehicle Weight (GVW): 42,000 kg Isdsw Igrbspfx Ag Ujal Functional Lifting capacity: 60,000 kg Crane: Year of manufacture 2007 Condition Damages: none

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 2 h, axle configuration: 4x4, load capacity: 227 kg, lifting height: 12,100 mm, lifting power: 227 kg/m, platform length: 1,050 mm, platform width: 700 mm, overall weight: 3,460 kg, construction height: 1,990 mm, fuel consumption per hour: 1 l/h, fuel tank capacity: 25 l, tire condition: 100 %, wheelbase: 1,600 mm, color: green, Equipment: all wheel drive, === KEY SPECIFICATIONS === Year of manufacture: 2025 Hours: 9 h Working height: 12.1 m Maximum horizontal outreach: 6.4 m Platform capacity: 227 kg Platform dimensions (L × W): 1050 × 700 mm Upper boom rotation: 360° Platform rotation: No Boom type: Articulated (knuckle boom) Jib: Yes Drive type: Hybrid (Electric + Engine) Four-wheel drive: Yes (4×4) Tyres: Rough-terrain Stabilisers: No Engine manufacturer: Kubota (Hybrid system) Emission standard: Stage V Weight: 3460 kg CE certification: Yes Iodjx A Elzepfx Ag Usal === HIGHLIGHTS === Carefully selected from trusted sources with verifiable ownership and service history CE-certified and delivered with full documentation Ready for immediate transport and operation Complete technical documentation available === CONDITION === Excellent working condition — fully inspected, serviced, and tested by certified professionals. Inspection on site available upon request. === LOCATION & DELIVERY === Located in Sittard, The Netherlands Worldwide delivery available Price €51,000 (EXW / excluding VAT) Reliable machine from a first owner with full maintenance history and expert technical support. Benefit from one of Europe’s largest stocks of access platforms and construction machinery. All machines are fully inspected, CE-approved, and ready for immediate use. Spare parts and professional technical assistance available upon request. === SHIPPING === Crane loading available for smooth and safe transport. Flexible global shipping options tailored to your destination and logistics needs. All logistics handled by the professional Collé Rental & Sales team.

Condition: good (used), Year of construction: 1981, pressure 300 t passage width 1100 mm Isdpfx Agjx Uru Ne Ueal stroke 950 mm table width 1050 mm table depth 1200 mm dayligth 1180 mm weight of the machine ca. 20 t dimensions of the machine ca. 2,8 x 3 x 4,5 m

Condition: new, The KB 32 SFV PRO is a high-performance Column Drilling Machine from KNUTH, designed to deliver precision and efficiency for various drilling applications. This robust drill press features an automatic feed system and is particularly well-suited for single part productions and manual series work in both workshops and industrial settings. Made from premium high-quality cast iron, the sturdy base, column, table, and gear head ensure excellent rigidity and durability. The heavy, precision-ground work table is equipped with T-slots for optimal setup versatility. With an infinitely variable drive that boasts low maintenance, the KB 32 SFV PRO is complemented by a convenient touchscreen control panel. Operators can easily access functions such as spindle speed control and an electronically controlled quill feed. The integrated coolant system enhances performance, while the standard LED work light ensures optimal visibility. Experience the reliability of this drill press and enhance your operations—request a quote today to add the KB 32 SFV PRO to your drilling equipment lineup in the Column Drilling Machines category. Ijdsuyh Unjpfx Ag Ujal

Condition: used, Diosna HK 224 bowl lift suitable for Kemper ECO 100/125 and Diosna SP240 bowls max. 600 kg lifting weight lifting height approx. 200cm Ijdpfx Aex Tf Iyjg Ujal total height 335cm

Condition: used, Year of construction: 1994, pressure 600 t stroke 100 mm no. of strokes 45 /min distance between columns 580 mm Iaodpfxsw U Ekpo Ag Ujl dayligth 460 mm table surface area 550 x 620 mm ram surface 550 x 430 mm ram adjustment 50 mm power requirement 15,0 kW Weight 13,5 t dimensions (WxDxH) 1,5 x 2,45 x 2,75 m Nominal force travel 1.7 mm Nominal energy 10.2 kJ With knuckle-joint drive, flywheel brake, hydraulic clutch, press frame balancing, self-monitoring control system

Condition: good (used), 2-column punching tool, separating tool, punching tool, punch, punching die, punching stamp, column frame -Manufacturer: Fibro stamping tool column frame -Type: 201.31.056. DIN 9822 C 100x80 -Die stamp: see photos -Dimensions: 340/160/H235 mm Iajdpfx Ajivql Ssg Ujl -Weight: 23 kg

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, axle configuration: 4x2, load capacity: 200 kg, lifting height: 12,100 mm, lifting power: 200 kg/m, platform length: 1,200 mm, platform width: 840 mm, overall weight: 2,560 kg, construction height: 1,980 mm, tire condition: 100 %, wheelbase: 1,900 mm, color: green, Equipment: UVV, === KEY SPECIFICATIONS === Year of manufacture: 2025 Hours: 1 h Working height: 12.1 m Max. horizontal outreach: 6.4 m Platform capacity: 200 kg Platform dimensions (L x W): 840 × 1200 mm Upper boom rotation: 405° Platform rotation: No Boom type: Articulated (knuckle boom) Jib: Yes (pendulum arm, ±0° tail swing) Drive type: Electric (Lithium / AGM) Four-wheel drive: No (2×4) Tyres: Solid Stabilisers: No Engine manufacturer: Electric drive (battery powered) Emission standard: Zero emission Weight: 2560 kg CE certification: Yes Ijdpfxox A Evto Ag Usal === HIGHLIGHTS === Carefully selected from trusted sources with verifiable machine history CE-certified and delivered with full documentation Ready for immediate transport and operation Comprehensive technical documentation available === CONDITION === Excellent working condition – fully inspected, serviced, and tested by certified professionals. Inspection on site available upon request. === LOCATION & DELIVERY === Located in Sittard, The Netherlands. Worldwide delivery available. Price €45,000 (EXW / excluding VAT). Reliable machine from a first owner with complete maintenance history and professional technical support. Benefit from one of the largest European stocks of new and used access platforms and construction machinery. All machines are fully inspected, CE-approved, and ready for immediate use. Spare parts and expert assistance available upon request. === SHIPPING === Crane loading available on request for smooth and safe transport. Flexible international shipping options tailored to your destination and logistical requirements. All shipments are professionally handled by the Collé Rental & Sales logistics team.

Condition: reconditioned (used), Year of construction: 1992, With VE 320 electronic Year of manufacture: 1992 Drilling capacity in steel: 32 mm Thread cutting device Mechanical feed infinitely variable via potentiometer Clamping surface table: 500 mm x 360 mm Drilling depth adjustment with digital display Protective device Drilling depth: 150 mm Iasdpfexc Iw Hox Ag Usl Spindle taper: MK 3 Spindle speeds 140 rpm – 1400 rpm stepless with digital display Drill table illumination

Year of construction: 1995, condition: like new (used), Retrofitted: 2025 Isdpfx Aewdy Rqeg Usal Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 9180 x 1000 mmNumber of T slots: 7T slots dimensions: 22 mm Traverses of axis X axis traverse: 7400 mmY axis traverse: 1200 mmZ axis traverse: 1500 mm Milling head Head type: Auto-indexing head UDG40 (every 2,5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 22 kW Feedrates Rapid feedrates (X-Y-Z): 12000 mm/min Weight and dimensions Maximum weight on table: 30000 kgMachine weight approx.: 34000 kgMachine dimensions approx.: 13950 x 5600 x 3650 mm Accesories Guarding and new perimetral fenceAutomatic tool changer: ATC-50New Longitudinal rear chip conveyorElectronic handwheel: New HR-510External coolant and high pressure through spindle Sales conditions Warranty: 6 months mechanical partsSale conditions: On request View all technical features

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 5,824 mm, travel distance Y-axis: 897 mm, travel distance Z-axis: 1,005 mm, rapid traverse X-axis: 6,000 m/min, rapid traverse Y-axis: 8,000 m/min, rapid traverse Z-axis: 8,000 m/min, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, Equipment: documentation/manual, SHW UFZ 4 Iaedpfx Agox Uw Ego Usl Travel distances • X-axis (bed): 5,824 mm • Y-axis (horizontal spindle stock): 897 mm • Z-axis (vertical): 1,005 mm Control • CNC control: Heidenhain iTNC 530 Clamping plate • Clamping surface: 5,000 x 2,000 mm Cross-traversing rotary table • Diameter: 1,400 mm (flattened) • Cross-axis travel: 1,131 mm Rapid traverse • X-axis: 6,000 mm/min • Y- and Z-axis: 8,000 mm/min Horizontal and vertical milling head • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm • Internal coolant supply • Spindle orientation with cycle 13 • Tapping without compensating chuck • The milling head was recently completely overhauled Automatic tool changer • Tool magazine for 45 tools Coolant system • Belt filter Chip conveyor Splash and chip guard General overhaul including control upgrade in 2008 About the company MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our core business is in the field of tool milling machines. Our services include, among others, spare parts supply, on-site customer service, machine overhauls as well as control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control system modernization ----- Used machine – used milling machine – used travelling column milling machine – metal machining – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used cnc milling machine – used boring milling machine – used metal milling machine – used metal mill – used cnc mill – cnc milling machines – milling machine – large part machining – cnc large part machining – milling – Heidenhain – MBM milling machine – MBM machine – column milling machine

Condition: used, Year of construction: 1997, pressure 1000 t distance between columns 1260 mm stroke 315 mm no. of strokes 10, 21 - 42 /min distance table/ram, max. stroke up, adjustment up 1295 mm Iaedevuukuopfx Ag Ujl table surface area 1250 x 800 mm table height over floor 670 mm side window 830 mm capacity of ejector in table 63 t ejector stroke of ejector in table 75 mm capacity of ejector in ram 16 t stroke of ejector in ram 23 mm ram surface 1250 x 800 mm ram adjustment 20 mm feeding length transfer 0 - 250 mm closing travel of each rail programmable 0 - 140 mm no. of strokes of the transfer 42 /min power requirement 135,0 kW weight 120,0 t Dimensions (WxDxH) 5,9 x 4,8 x 7,95 m height above floor 6,95 m height beneath floor 1,0 m with DC drive, pneumatic clutch, motoric ram adjustment, pneumatic counterbalance in ram, mechanical ejector in table (pneumatically controlled), mechanical ejector in ram, ram interlocking, die clamping system in table and ram, motoric oil circular lubrication, grease lubrication control of the press: Siemens S 5 - CNC 2-Achs-Transfer (Fabrikat Dreher, Type STV-D Modell 350/100-SO, Bj. 2008), Steuerung Siemens S 7 - cleaning system (make Beyss, yom. 1989) as is where is, WITHOUT putting into operation, stored in dismantled condition The press was previously installed in a soundproof enclosure, which is not part of the scope of delivery Video at seller's site before dismantling available

Condition: used, Year of construction: 2017, Dahlih DCM 4225 Double Column Machining Centre with Fanuc Series Oi-MF, Table Size 4000 x 2200mm, Travel X/Y/Z= 4200/2000/800mm, Max Table Load 12,000kgs, 40 Tool ATC, Spindle Taper BT50, Max Spindle Speed 6000rpm, Main Motor 26kW (35HP), 20 Bar Through Spindle Coolant, 4th Axis Interface, 300mm Column Extension, Right-Angled Head, Renishaw RMP 60 Probe, Swarf Conveyor, Floor Space 5650 x 11120 x 4130mm, Machine Weight 40,000kgs. S/No. 3006030013 (2017) Location: These lots are located in Tamworth, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Iaodpfx Ajx E Ukhsg Uol

Condition: used, operating hours: 4,500 h, Serial number: 30xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21752 Specifications: Hours: approx. 4500 Capacity: 20 tons Winch Tires (see pictures) Isdpjxvlc Tefx Ag Ueal Outriggers New batteries Description:Kato KR-20 mobile crane with approximately 4500 hours.The crane is functional but no longer certified (last certified 11/2023).20-ton capacity.There is a contact fault in the horn, so it does not make a sound when the crane is extended.Can be delivered at short notice. Hours: 4500 Own weight: Model: Kato KR-20 Mobilkran SE VIDEO -

Condition: used, Year of construction: 2001, Technical details: faceplate diameter: 2000 mm swing diameter: 2130 mm turning height: 1400 mm ram stroke range: 1000 mm workpiece weight: 10 t faceplate turning speed range: 1 -200 U/min main drive: 60 kW total power requirement: 95 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 6,0 x 4,0 x 5,6 m with CNC SIEMENS 840 D C-axis driven tooling 15/22 kW automatic toolchnager 16-pockets through spindle coolant splash guarding and chip conveyor Isdpfx Ajvb A Uzjg Usal *

Year of construction: 2011, condition: like new (used), Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-i530 Iedpfxexwzxto Ag Ujal Technical features Dimensions Table dimensions: 12500 x 2250 mmNumber of T slots: 9T slots dimensions: 22 mm Traverses of axis X axis traverse: 11500 mmY axis traverse: 1500 mmZ axis traverse: 2000 mmVertical capacity (VC): 150 / 2150 mm (adjustable) Milling head Head type: Universal Auto-indexing UDG (2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871) / Pull stud: DIN 69872Speed range: 3000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y-Z): 30000 mm/min Weight and dimensions Maximum weight on table: 15 T/m2Machine weight approx.: 62000 kgMachine dimensions approx.: 18494 x 8412 x 5290 mm Accesories Guarding: front doors and new edge wire safety mesh fenceAutomatic tool changer: ATC40Chip conveyor: 1 longitudinal rear hinge typeExternal coolant high-pressure coolant through spindleElectronic handwheel: HR-410 Sales conditions Warranty: 6 months mechanical partsSale conditions: On request View all technical features

Condition: used, Year of construction: 1993, Pressure 1500 t distance between columns 5050 mm stroke 1100 mm Distance table/ram, stroke up 2300 mm Table surface area 5000 x 2700 mm pressure of drawing cushion in table 320 t Die cushion stroke in table 300 mm Die cushion area in table 4300 x 1830 mm Die cushion pressure in ram 120 t Die cushion stroke in ram 200 mm Die cushion area in ram 3410 x 1650 mm Ram surface 5000 x 2400 mm Iedpfxevuucqj Ag Ujal Speed down 360 mm/s Speed up 168 - 505 mm/s Working speed 19 - 86 mm/s Oil volume 10500 l Power capacity 450,0 kW Weight 400,0 t Dimensions (WxDxH) 3,47 x 6,95 x 12,21 m Height above floor 8,21 m Height below floor 4,0 m year of manufacture 1983 - overhaul 1993 with oilhydraulic drive, drawing cushion in table, drawing cushion in ram (drawing cushion surface) approx. 3410 x 1650 mm), cutting impact cushioning / stroke limitation (adjustment of the spindle approx. 500 mm, max. dampening force approx. 750 t, dampening stroke max. approx. 30 mm), controllabel dependant on pressure/time and way as is where is, WITHOUT dismantling, WITHOUT loading

Condition: used, Technical details: faceplate diameter: 1800 mm swing diameter: 2000 mm turning height: 1170 mm z-axis: 1000 mm cross rail adjustment - vertical: 800 mm faceplate speeds:: 2,5 - 280 workpiece weight: 12 t feeds: 1 - 6000 mm/min max. torque on the faceplate: 50000 Nm total power requirement: 85 kW weight of the machine ca.: 41 t dimensions of the machine ca.: 5,6 x 4,8 x 4,6 m Machine retrofit and overhould in 2005 with SIEMENS 840 D powerline control - 6 jaw hydraulic power chuck - tool changer for 12 tools - chip conveyor, coolant attachment, splash housing Iedpfjvb Db Nex Ag Usal - various tool holders *

Year of construction: 1998, condition: like new (used), Retrofitted: 2025 Numerical control: NUEVO/NEW HEIDENHAIN TNC-i640 Iasdpfx Aev D Rxmjg Usl Technical features Dimensions Table dimensions: 7650 x 1000 mmNumber of T slots: 7T slots dimensions: 22 mm Traverses of axis X axis traverse: 5850 mmY axis traverse: 1200 mmZ axis traverse: 1500 mm Milling head Head type: Auto-indexing head UDG (every 2,5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 20 - 3000 rpmSpindle power: 29,6 kW Feedrates Feedrates: 20 - 5000 mm/minRapid feedrates (X-Y-Z): 10000 mm/min Weight and dimensions Maximum weight on table: 4000 kg/m2Machine weight approx.: 31000 kgMachine dimensions approx.: 11590 x 5179 x 3485 mm Accesories Pherimetral guarding and new perimeter safety fenceAutomatic tool changer: ATC-30Longitudinal rear chip conveyorElectronic handwheel: New HR-510External coolant and high pressure through spindle Sales conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: used, Year of construction: 2010, Technical details: x-travel: 6500/13500 mm y-travel: 4000 mm z-travel: 1500 mm w-axis: 2250 mm table surface area: 5500/12500 x 3000 mm max. workpiece weight: 50.000/75.000 kg ram head dimension: 520 x 625 mm milling spindle motor: 67,4 ( s1/100% ) kW max. torque on the spindle: 2900 Nm tool taper: DIN 69893 HSK-A 100 milling head speed: 1 - 1000 / 5 - 5000 U/min feed speeds: 1 - 24000 mm/min w-axis: 1 - 6000 mm/min. Ijdpfeway I Usx Ag Usal distance between columns: 3500 mm passage: 3000 mm total power requirement: 120 kW weight of the machine ca.: 250 t dimensions of the machine ca.: 29,5 x 9,5 x 8,2 m with CNC SIEMENS 840 D autom. tool magazine for 212 tool stations autom. milling head magazine for 6 milling heads 1 milling head -straight- 67 kW, 2900 Nm, 5000 rpm, HSK-A 100 2 milling head -straight extended- 40 kW, 1700 Nm, 5000 rpm, HSK-A 100 3 milling head -angular head extended- 40kW, 4000 rpm, 1800 Nm, HSK-A 100 4 milling head -angular head - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 5 milling head -angular head - 67 kW, 4000 rpm, 2900 Nm, 360 x 1°, HSK-A 100 6 milling head -universal Index head - 40 kW, 4000 rpm, 2100 Nm, C-axis 360 x 1°, B-axis +/- 110 x 1°, HSK-A 100 coolant attachment, chip conveyor *

Year of construction: 2000, condition: like new (used), Retrofitted: 2024/2025 Numerical control: HEIDENHAIN TNC-426 Technical features Dimensions Table dimensions: 3600 x 1000 mmNumber of T slots: 7T slots dimensions: 22 mm Traverses of axis X axis traverse: 2700 mmY axis traverse: 1000 mmZ axis traverse: 1000 mm Milling head Head type: Universal Auto-indexing BIRA – B body (every 1º) and C body (every 2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871-B) / Pull stud: DIN 69872-BSpeed range: 60 - 2000 rpmSpindle power: 22 kW Feedrates Feedrate (X / Y-Z): 5000 mm/minRapid feedrate (X / Y-Z): 10000 mm/min Weight and dimensions Maximum weight on table: UndeterminedMachine weight approx.: 30000 kgMachine dimensions approx.: 7900 x 6250 x 3640 mm Accesories GuardingAutomatic tool changer: ATC30Chip conveyor: rear longitudinalExternal coolant through spindle (B form)Electronic handwheel: New HR-510 Sales conditions Warranty: YesSale price (Ex Work): On request View all technical features Iaodsu Im Rwopfx Ag Uol

Condition: used, Technical details: faceplate diameter: 1400 mm swing diameter: 2000 mm turning height: 1270 mm main drive: 80 kW faceplate speeds from - to: 1 - 355 U/min max. workpiece weight: 6.000 kg milling motor: 37 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 (8 x 100 mm) mm ram head dimension: 240 x 240 mm max. ram stroke: 1250 mm weight of the machine ca.: 50 to total power requirement: 133 kVA dimensions of the machine ca.: 11 x 5 x 6,4 m Iajdpfovb Dcmex Ag Uel Machine general overhould in 2008 and equiped with CNC SIEMENS 840 D control - tool changer for 72 tools - C-axis, live tooling - angular- and straight tool holder head with CAPTO taper - Transmit function - complete splash housing - coolant device, chip conveyor - diverse accessories *

Condition: used, Technical details: faceplate diameter: 1000 mm swing diameter: 1600 mm turning height: 1200 mm main drive: 75 kW faceplate speeds from - to: 7 - 800 U/min milling motor: 25 kW milling head speed: 7 - 3000 U/min milling spindle - taper: ISO 50 cross rail adjustment - vertical: 800 mm Iedsvb Dcaopfx Ag Usal ram head dimension: 240 x 240 mm weight of the machine ca.: 40 to dimensions of the machine ca.: 9 x 7,8 x 6,0 m Machine general overhould in 2004 and equiped with Siemens 840 D control - tool changer rack magazine - C-axis, live tooling, - Transmit function electronical Y-axis - angular milling head - complete splash housing - coolant device, chip conveyor *

Condition: used, Technical details: Isdpfew Rz U Aex Ag Uoal faceplate diameter: 5000 mm swing diameter: 6100 mm turning height: 2400 mm ram stroke each side: 1490 mm ram head dimension: 340 x 340 mm max. workpiece weight: 100.000 kg total power requirement: 100 kW weight of the machine ca.: 155 t faceplate turning speed range: 0,4 - 50 U/min with 2 x 2 axes CNC SIEMENS 840 D *

Condition: used, Year of construction: 2004, Technical details: faceplate diameter: 4770 mm swing diameter: 7000 mm turning height: 1000 mm slide stroke: 1000 mm workpiece weight max.: 100000 kg faceplate turning speed range: 2 - 20 U/min feed speeds: 1 - 10000 mm/min rapid traverse: 10 m/min Iajdpfxovb Hlws Ag Usl ram head dimension: 250 x 250 mm main drive: 100 kW total power requirement: 200 kW with CNC SIEMENS 840 D 2 Vertical Supports with toolchanger 12 pockets C-axis and driven tooling SK 50 37 Kw 3000 rpm Chip conveyor and coolant attachment *