Used Mikron Wf 31 for sale (188)

Condition: good (used), Permanent magnet motor, electric motor, servo motor, geared motor, three-phase motor -Manufacturer: Siemens, Permanent Magnet Motor from CNC milling machine Mikron WF 51C/155 Bsdpfekxhpusx Afmelp -Type: HU3074-,0AC01-Z -Voltage: 167 V -Power: 1.8 kW -Speed: 2000 rpm -Shaft: Ø 22 x 45 mm -Number: 2x motors available -Price: per piece -Dimensions: 390/140/H185 mm -Weight: 23 kg/pc.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 24 m/min, nominal power (apparent): 16 kVA, controller manufacturer: Heidenhain, total height: 2,950 mm, total length: 2,500 mm, total width: 2,610 mm, overall weight: 7,000 kg, operating hours of spindle: 10,902 h, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron HEM600 Year of manufacture: 2013 Control system: Heidenhain ITNC 620 Spindle hours: 10,902 X-axis: 650 Y-axis: 530 Z-axis: 600 Rapid traverse: X, Y 30 m/min, Z 24 m/min Maximum spindle speed: 9,000 RPM Tool holder: SK40 Tool magazine: 30 positions Chip conveyor Handwheel Coolant nozzle Connected power: 16 kVA Clamping area: 850x560 mm Dimensions: approx. W=2,500 mm / D=2,610 mm / H=2,950 mm Weight: approx. 7,000 kg In very good condition / without clamping devices! Bsdpfjz Uxiiex Afmjlp Inspection possible at any time while the machine is powered on. Available from approximately the end of November 2026. Upon request and for an additional charge, we can disassemble the machine and load it onto a customer-provided transport vehicle.

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer Bodpfx Aekzpmujfmslp -Manufacturer: Trasfor, transformer Trafo 1 PH Snl from CNC milling machine Mikron WF 51C/155 -Type: TNM1m2k5/E -Technical data: see photo of the nameplate -Dimensions: 180/160/H215 mm -Weight: 25.5 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer Bodpfx Afokzpm Hjmolp -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300VA -Primary: 3x380V -Technical data: see photo identification plate -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 025, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: iTNC530, total height: 2,800 mm, total length: 3,000 mm, total width: 2,500 mm, table width: 600 mm, table length: 800 mm, table load: 800 kg, overall weight: 9,500 kg, spindle speed (max.): 36,000 rpm, operating hours of spindle: 9 h, spindle nose: HSK 50E, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, For sale is a used high-speed machining center from the manufacturer MIKRON. High-precision CNC machining center from Mikron / GF AgieCharmilles, designed for demanding HSC machining in toolmaking, graphite and electrode machining, as well as for flexible series production. Additionally equipped with APS (Advanced Process System) and ITC (Intelligent Thermal Control) for maximum process reliability and thermal stability. At “Der Spindel Doctor”, a Step-Tec spindle (a key component of the machining center) was professionally overhauled (report and invoice included) and put back into operation after balancing and inspection. The machine will be completely set up and tested according to the Mikron protocol. During the machine inspection, many wear parts were replaced: X-axis encoder and scale, pneumatic cylinders on the tool changer, tool holders, pneumatic maintenance unit, pneumatic hoses, MMS hoses, water hoses, etc. The machine is energized and can be inspected and tested. By arrangement, the machine can be put into operation at your location. Accessories: 4-position pallet changer II Table chuck Preparation for PS 32.00 measuring probe Mobile handwheel Blum laser tool measurement system Spindle cooling unit Minimum quantity lubrication - Unilub Blsdpfx Afez Dx Shjmjp Oil mist extraction Optical operating mode indicator Air nozzle on the spindle slide Chip conveyor (including coolant tank) General overhaul of the spindle

Condition: used, Year of construction: 2013, Milling machines Travel distance X: 650 mm Travel distance Y :530 mm Travel distance Z: 600 mm Number of axis: 3 milling machine / machining center Control: Heidenhain iTNC 620 spindle chuck: SK40 spindle revolutions: 9000 rpm Speed range to: 9000 U/min table size X: 850 mm table size Y: 560 mm tool changer: 30 - time Rapid traverse: 30 m/min Bsdps Adz Hhofx Afmjlp chip conveyor control Heidenhain - Very good condition - Washdown gun - Electronic handwheel - Documentation / manual - Without clamping equipment - Inspection under power possible

Condition: used, Year of construction: 2013, Milling machines Travel distance X: 600 mm Travel distance Y :500 mm Travel distance Z: 540 mm Number of axis: 3 milling machine / machining center Control: Heidenhain iTNC 530 spindle chuck: SK40 spindle revolutions: 14000 rpm Speed range to: 14000 U/min tool changer: 24 - time spindle cooling chip conveyor Bledpfs Adz Hnox Afmop control Heidenhain - DXF file import - Electronic handwheel - Through-spindle coolant (IKZ) - Belt filter - Air cooling through the spindle - Spindle spray ring - Direct measuring system / linear scales - Renishaw laser tool measurement - Renishaw OMP40 3D touch probe - Documentation / manual - Very good condition - Without the vises shown in the pictures

Condition: used, Year of construction: 2003, travel distance X-axis: 1,600 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, overall weight: 18,500 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, Machining Center - Vertical Manufacturer: MIKRON Model: VCE 1600 PRO Year of manufacture: 2003 Control system: Heidenhain iTNC 530 Technical specifications: X-axis: 1,600 mm Y-axis: 900 mm Z-axis: 900 mm Spindle speed: 10,000 rpm Number of tool stations: 30 Machine weight: approx. 18,500 kg Bodpo Ahrm Dofx Afmelp Condition: Used Technical features & accessories: - 2 rear-mounted chip conveyors, integrated into the machine - Oil cooler - Coolant filtration system Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A -Type: 6SN1123-1AB00-0BA1 -Control Unit: 6SN1118-1NH00-0AA1 -Number: 3x module available -Price: per piece Bledpswcyngjfx Afmjp -Dimensions: 290/50/H480 mm -Weight: 6.4 kg/piece

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module Bsdpfx Aswcyq Ijfmelp -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A -Type: 6SN1123-1AB00-0AA1 -Control Unit: 6SN1118-1NH00-0AA1 -Number: 7x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 6.3 kg/piece

Condition: used, Year of construction: 2002, travel distance X-axis: 400 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 30, Machining Center - Universal Manufacturer: MIKRON Type: UCP 600 Year of manufacture: 2002 Control system: Heidenhain iTNC 530 Technical specifications: X-axis: 400 mm Y-axis: 450 mm Z-axis: 450 mm C-axis: 360° C-axis rotational speed: 30 rpm A-axis: +107° / -10.5° Spindle speed: 20,000 rpm Number of tool stations: 30 Blede Ahrm Sepfx Afmep Condition: Used Technical features & accessories: - Oil/air lubrication system - Water cooler Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to modifications and errors in the technical data and information; prior sale reserved!

Condition: used, Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: TNC 640, table load: 150 kg, spindle speed (max.): 20,000 rpm, spindle nose: HSK-A63, number of slots in tool magazine: 170, tool weight: 6,000 g, Universal Machining Center Manufacturer: MIKRON Type: HPM 450U Year of manufacture: 2017 Control: Heidenhain TNC 640 Technical details: X-axis travel: 600 mm Bedpfx Afez Ic Afsmolp Y-axis travel: 450 mm Z-axis travel: 450 mm B-axis: ° C-axis: 360° Spindle speed: 20,000 rpm Drive power at S1/S6 (40% duty cycle): 23/36 kW Torque at S1/S6 (40% duty cycle): 77/120 Nm Tool holder: HSK-A63 Number of tool positions: 170 Tool change time:

Condition: good (used), Year of construction: 2018, operating hours: 3,575 h, machine/vehicle number: 108.008.00.0055, total height: 3,417 mm, total length: 4,680 mm, total width: 4,471 mm, table width: 850 mm, table length: 2,100 mm, overall weight: 19,500 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 1,010 h, coolant supply: 20 bar, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron VCE 2000 Pro * 3-axis machining center * X-axis travel: 2000 mm * Y-axis travel: 900 mm * Z-axis travel: 800 mm * Table size: 2100 × 850 mm * Maximum table load: up to 3000 kg Bledpfsz Nh R Esx Afmep The machine features the following technical equipment: Control system: Heidenhain TNC 620 Spindle speed: 10,000 rpm Tool holder: SK 40 High-pressure pump: 20 bar Tool magazine: 30 positions Preparation for a 4th axis The machine is located in Eschweiler.

Condition: excellent (used), Year of construction: 2011, operating hours: 4,450 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 360 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, controller manufacturer: Heidenhain, controller model: iTNC530i, table load: 25 kg, rotational speed (min.): 250 rpm, spindle speed (max.): 42,000 rpm, operating hours of spindle: 4,400 h, coolant supply: 4 bar, number of spindles: 1, number of slots in tool magazine: 66, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, HSC milling machine HSM 400 U LP Milling spindle Steptec 42,000 rpm, 2 years old ITC & ITCX 5-axis thermal control Heidenhain TNC 530i control system Tool magazine 66X HSK40E Rotary table ITS 148 Minimum quantity lubrication Oil-mist extraction system Chip conveyor, manufacturer Phoenix Metall Water/water heat exchanger Measuring probe, infrared, manufacturer M&H 40.01 TX/RX Pallet magazine, 20 x ITS 148 Blsdszzknxopfx Afmop Coolant and air supply from outside

Condition: used, Year of construction: 2004, machine/vehicle number: IntNr231677,

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2X15A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AB00-0AA0 -Dimensions: 290/50/H480 mm Boderb E Hfspfx Afmelp -Weight: 5.8 kg

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 25A from CNC milling machine Mikron UME 600 Blsdpfx Aferb E Hqsmop -Type: 6SN1123-1AA00-0BA2 -Dimensions: 290/50/H480 mm -Weight: 5.8 kg

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 50A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0CA0 Bedpsrb E Hbefx Afmslp -Dimensions: 290/50/H480 mm -Weight: 6.8 kg

Condition: used, Year of construction: 2000, travel distance X-axis: 800 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 655 mm, controller manufacturer: Heidenhain, controller model: TNC 426, rotary table diameter: 800 mm, overall weight: 10,100 kg, spindle speed (max.): 15,000 rpm, spindle nose: SK 40, number of slots in tool magazine: 60, Equipment: chip conveyor, Machining Center - Universal Manufacturer: MIKRON Type: UCP 1000 Year of manufacture: 2000 Control system: HEIDENHAIN TNC 426 Technical specifications: X-axis: 800 mm Y-axis: 1,000 mm Z-axis: 655 mm C-axis: 360° A-axis: -25° / +45° Table diameter: 800 mm Spindle speed: 15,000 rpm Tool holder: SK 40 Number of tool stations: 60 Machine weight: approx. 10,100 kg Condition: Used Technical features & accessories: Bedpfx As Ahkhijfmolp - Chip conveyor - Compact filtration system Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, 5-AXIS MACHINING CENTER MIKRON HPM 450U + WORKPARTNER SYSTEM 3R, 115 POSITIONS, MANUFACTURED IN 2014 EQUIPPED WITH HEIDENHAIN TNC 530 ELECTRONIC HANDWHEEL TRAVEL: X 600, Y 450, Z 450, B +45º/-120º, C, X 360º Bsdpfxsy Twa Ue Afmelp SPINDLE: 20,000 RPM, 36 KW, HSK-A63 LINEAR SCALES ON X, Y, Z 120-TOOL CHANGER ROBOT SYSTEM 3R WITH 115 PALLETS TOOL MEASURING PROBE WORKPIECE MEASURING PROBE PAPER FILTER SPINDLE COOLING UNIT

Condition: used, Year of construction: 2011, operating hours: 10,550 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 84 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 1,200 kg, table width: 600 mm, table length: 1,400 mm, table load: 1,200 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 10,550 h, coolant supply: 70 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Selling a top-maintained Mikron HPM 1200 HD, manufactured in 2011, equipped with a Heidenhain iTNC530 control system. Travel ranges: X: 1200mm Y: 600mm Z: 500mm Equipment: Table dimensions: 1400 x 600mm Table load capacity: 1200kg Control system: Heidenhain iTNC530 Chip conveyor Spindle mount: HSK-A63 Spindle speed: 20000 RPM Tool changer: 60 positions Electric handwheel Tool measurement 3D probe Blodszkbr Tepfx Afmsp IKZ 70 bar Weight: 15 tons Accessories: 20 tool holders HSK-A63 2 vices Complete documentation Machine feet The machine can be inspected and tested under power after prior appointment.

Condition: excellent (used), Year of construction: 2015, Mikron HPM 800U HD 5 axis Vertical Machining Centre, with 7 pallet changer (2015) Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, A axis -91 / + 121 degrees, C axis, 360 degrees, Heidenhain TNC530, Spindle Speed 20,000rpm, Bljdszm Ticjpfx Afmep 36kW Spindle Motor, HSK A63 Spindle Taper, 165 tools, swarf conveyor, through spindle coolant,

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 675 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 620 HSCI, spindle speed (max.): 10,000 rpm, Equipment: documentation/manual, MIKRON VCE 1200 PRO VERTICAL MACHINING CENTER, YEAR OF MANUFACTURE 2015 EQUIPPED WITH HEIDENHAIN TNC 620 HSCI CONTROL ELECTRONIC HANDWHEEL TRAVELS: X 1200, Y 600, Z 675 MM TABLE SURFACE: 1220 x 620 MM 40-TOOL RANDOM TOOL CHANGER SPINDLE: 10,000 RPM, 18 KW DUAL CHIP CONVEYOR Bledpfjy Tvw Eox Afmep LINEAR SCALES INTERNAL COOLANT SYSTEM: 30 BARS LASER TOOL MEASUREMENT PROBE PREPARATION FOR WORKPIECE MEASUREMENT PROBE (PROBE NOT INCLUDED)

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 107.44.00.072, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 20 m/min, workpiece weight (max.): 500 kg, table width: 600 mm, table length: 600 mm, table load: 500 kg, overall weight: 9,900 kg, spindle speed (max.): 20,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, Mikron UCP 800 Duro – 5-axis CNC machining centre Bjdpfswww Rhex Afmjlp We offer for sale a precise 5-axis CNC machining centre Mikron UCP 800 Duro from the renowned Swiss brand GF Machining Solutions. The machine is perfect for machining complex parts, moulds, dies, and components that require the highest precision and surface quality.

Condition: excellent (used), Year of construction: 2004, operating hours: 22,146 h, functionality: fully functional, machine/vehicle number: 107.44.00.035, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece length (max.): 300 mm, workpiece width (max.): 140 mm, total height: 2,900 mm, total length: 3,500 mm, total width: 2,400 mm, table load: 500 kg, rotary table diameter: 600 mm, overall weight: 9,900 kg, spindle speed (max.): 20,000 rpm, operating hours of spindle: 4,192 h, spindle motor power: 12,000 W, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, Here is a CNC vertical 5-axis machining center from the manufacturer Mikron for sale. The machine is in very good condition and can be inspected and tested at any time. Blodpe Afy Ilsfx Afmep Manufacturer: Mikron GF Type: UCP 800 Duro Year of manufacture: 2004 Control system: Heidenhain iTNC 530 Technical data: Travel distances X-Y-Z: 800x650x500 mm Max. rapid traverse rate: 30 m/min Max. feed force X- and Y-axis: 7000 N Max. feed force Z-axis: 9000 N Rotary table C-axis: 360° Rotational speed: 20 rpm at 30% duty cycle, 8 rpm at 100% duty cycle Swivel range A-axis: -30° to +120° Swivel speed: 15 rpm at 30% duty cycle Table area: 600x600 mm Max. table load: 500 kg Magazine capacity: 30 positions, fixed Tool holder: HSK-63 Max. tool length: 300 mm without taper Max. tool weight: 8 kg Tool diameter: 90 mm fully loaded / 140 mm partially loaded Spindle speed: 20,000 rpm Power: 16 kW at 44% duty cycle, 12 kW at 100% duty cycle New spindle installed in 2021. Since then, 4,192 spindle hours. Operating hours (program runtime): 22,146 h Machine dimensions: 3500x2400x2900 mm Weight: 9,900 kg Included in the scope of supply: 1x KSS system 1x Chip conveyor with coolant tank 1x Renishaw measuring probe OMP60