Used Mikron Multistar for sale (180)

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A -Type: 6SN1123-1AB00-0AA1 -Control Unit: 6SN1118-1NH00-0AA1 Bedpfowcyq Iex Altodd -Number: 7x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 6.3 kg/piece

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V Bodpfxjwd N S Ds Altsdd -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module Bdsdporb E Hmefx Altsd -Manufacturer: Siemens, Simodrive 611 I/R module INT. 16/21KW CNC milling machine Mikron UME 600 -Type: 6SN1145-1BA00-0BA0 -Dimensions: 290/100/H480 mm -Weight: 10.6 kg

Year of construction: 2018, condition: used, Computer monitor, screen, TFT industrial monitor -Monitor: TFT industrial monitor from CNC milling machine Mikron UME 600 -Type: 12.1" TFT industrial monitor 2363130 -Dimensions: 400/320/100 mm -Weight: 3.1 kg Bdedpfx Aorcnmzsltsd

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke Bdedpfx Askzpngoltsd -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 -Type: D 1515 S3 -Current: 10A -Dimension: 180/90/H190 mm -Weight: 9.5 kg

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 2x25A Bodpfx Aowcyngsltedd -Type: 6SN1123-1AB00-0BA1 -Control Unit: 6SN1118-1NH00-0AA1 -Number: 3x module available -Price: per piece -Dimensions: 290/50/H480 mm -Weight: 6.4 kg/piece

Condition: good (used), Clamping table, clamping angle, T-slot table, rotary table, milling machine table Bedpferbm Udex Altedd -Manufacturer: Mikron, milling machine table T-slot table from CNC machining center UME 600 -Table surface: 530 x 900 mm -T grooves: groove width 14 mm, groove spacing 63 mm -Transport dimensions: 900/530/H390 mm -Weight: 248 kg

Condition: used, CNC control, control panel, machining center operator panel, control unit, control panel, control unit -Manufacturer: Mikron, operating unit -Type: TCD 22 - DIN 8659 Bsdpfxjprb Dvj Altsdd -Printed circuit board: WW TCD 22 control unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/130/H240 mm -Weight: 5 kg

Condition: good (used), PLC control, power module, LT module, E/R module, regenerative module, CNC control, safety slot universal module, plug-in cards, printed circuit boards, control card, circuit board Bjdpfsrb E Ewjx Altedd -Manufacturer: Mattle Mikron, safety insert universal module board from CNC milling machine Mikron UME 600 -Safety module: Type SEMU TN 24VDC -Board: Mikron 958 74 10 275 S300 -Dimensions: 300/170/H200 mm -Weight: 1.4 kg

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Trasfor, transformer Trafo 1 PH Snl from CNC milling machine Mikron WF 51C/155 Bjdjkzpmuspfx Altjdd -Type: TNM1m2k5/E -Technical data: see photo of the nameplate -Dimensions: 180/160/H215 mm -Weight: 25.5 kg

Condition: excellent (used), Angle measuring device, encoder, rotary encoder, absolute rotary encoder -Manufacturer: Heidenhain, angle measuring device with integrated bearing, original packaging -Type: RCN 619.5GS5-19B00 ID No.: 249 003-19 -Quantity: 1x measuring device available Price: per piece -Cardboard dimensions: 180/140/H90 mm Bedeqrwxaepfx Altjdd -Weight: 1.0 kg

Condition: good (used), Safety switch, safety switch, protective grid switch -Manufacturer: Euchner, Safety switch from CNC milling machine Mikron UME 600 -Type: TZ2LEO24M ID No.: 090559 Technical data: see photo of the nameplate Quantity: 1 piece available -Dimensions: 170/110/40 mm Bdodpfjrb E E Eex Altsd -Weight: 1.1 kg

Condition: good (used), Year of construction: 1992, Mikron WF 3 DPM Tool Milling Machine Mikron WF 3 DPM with Heidenhain TNC 135 Control, Year 1988, Overhauled in 2014, Excellent CONDITION Technical Data: - Year of manufacture: 1988 / 2014 - Fixed angle table - Spindle speed: 31.5 to 3150 rpm - Stepless feed in 3 axes: 0 to 2000 mm/min - Travel paths X/Y/Z: 500/500/400 mm - Rapid traverse x/y/z: 3 m/min - Table size: 800 x 450 mm - Table load capacity: 250 kg - Vertical quill stroke: 90 mm - Vertical and horizontal quill – SK40 - Hydraulic clamping system - Weight approx. 1950 kg - Space requirement approx.: 2.3 x 2 x 2 m - Drive power: 12 KVA Accessories and Equipment: - Heidenhain TNC 135 control - Hydraulic clamping vertical and horizontal - Automatic central lubrication - Spindle brake Bdedpfx Asyxc Unelted - Technical documentation, spare parts lists, control system manual, and programming examples - Handwheels - Coolant system About the machine: A Mikron WF 3 DPM tool milling machine with Heidenhain TNC 135 control is being offered. This universal milling machine is in excellent original condition. It comes from a workshop where it was used only occasionally for prototyping. The control system is very user-friendly. In addition, the machine features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal operation is very easy thanks to the swing-away vertical head. The guides are lubricated regularly via central lubrication. The Mikron has been mechanically and electrically tested by us. Take the opportunity to inspect and test the Mikron under power at our facility. You can find more milling machines from well-known manufacturers on our website.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidenhain iTNC 530, working area X 600 x Y 450 x Z 450 mm, spindle mount CAT40, 24-position automatic tool changer, 20,000 rpm spindle, machine weight 6,100 kg, power connection 16 kW, main fuse 32 A, operating voltage 400 V, 50/60 Hz Bdedpfx Aljw Hxzmstod

Condition: used, Year of construction: 1991, Milling machine in good condition, fully operational. Connected, can be tested, inspected. Specification: Model: Mikron WF31C Year: 1991 X axis: 500 mm Bsdpjq Hdwuefx Altsdd Y axis: 500 mm Z axis: 400 mm Speed: 31,5 - 3150 rpm Contorter: Heidenhain TNC 155 Motor power: 4kW Weight: 2 300 kg Machine dimensions: 2580 x 1800 x 2125 mm Manufactured in: Switzerland If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, 1 x used milling machine Mikron UME 600 Bdedpoyvh U Ujfx Altsd Year of manufacture: 1995 Control: TNC 407 X travel: 600 mm Y travel: 500 mm Z travel: 450 mm Speeds: 5 - 5000 rpm Quill stroke: 90 mm Total power requirement: 9 kW Feed range: 0-10,000 mm/min Machine weight approx.: 3260 kg Machine dimensions approx.: 2200x2800x2000 mm Spindle: 6 kW Vertical milling head: SK 40 No internal coolant (WW)

Condition: good (used), Mikron WF 32 CH Universal milling machine Bdodpowit Rhefx Alted Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specifications Manufacturer: Mikron Type: WF 32 CH Control: Heidenhain TNC355 Travels: X 560 mm Y 500 mm Z 400 mm Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 - 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: good (used), Mikron WF31D Precision milling and drilling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shiftable stepped gearbox and Poly-V-belt. Vertical spindle can be extended by 90 mm; changeover from vertical to horizontal machining possible. Recirculating ball screws with DC drives enable simultaneous feed movements. Guides are protected against dust, chips and coolant. Technical data Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Vertical movement (Z): 400 mm. Drive power: 3.3/4.0 kW Bjdpfxjwiucfo Altedd Speed range: 40-4000 rpm. Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equipment Total installed rated power: 10.0 kW installed effective power: 7.3 kW. Operating voltage: 3 x 380 V - 50/60 Hz Protection class: IP 54. Max. permissible ambient temperature: +35 °C Relative humidity: 75 %. Dimensions and weights Width 2450mm Length 2800mm Height 2000mm Net weight of the machine: approx. 2570 kg. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 1997, x-travel 600 mm y-travel 500 mm z-travel 450 mm Control Heidenhain TNC 426 PB tool change unit 22-fach tool taper SK40 Bdodpeykb Hlofx Alted turning speeds 5-6.300 U/min table-size 900 x 530 mm table load 400 kg total power requirement 9 kW weight of the machine ca. 3550 kg dimensions of the machine ca. 2,2 x 2,7 x 2,05 m 3-axis vertical machining centre MIKRON UM 600, built in 1997 In excellent technical condition, all guides have been freshly scraped. The spindle has been re-mounted and has since been used for only 262 hours. New power unit for spindle drive installed. Accessories: Heidenhain TS 642 touch probe system 2 new vices SK40 tool holder

Condition: ready for operation (used), Year of construction: 2006, machine/vehicle number: 0144, functionality: fully functional, operating hours: 17,716 h, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 675 mm, controller model: Heidenhain iTNC 530, TECHNICAL DETAILS X-axis travel: 1,200 mm Y-axis travel: 600 mm Z-axis travel: 675 mm Work spindle speed: 30 - 8,000 rpm Tool holder: ISO B 40 Table size: 1,220 x 620 mm T-slots: 18 T-slots: 5 x 18 mm T-slot spacing: 100 mm Table load capacity: 1,700 kg Control system: Heidenhain iTNC 530 Feed rate X / Y / Z: 3,000 mm/min Rapid traverse X,Y / Z: 24 / 20 m/min MACHINE DETAILS Voltage: 3 x 400 V AC + PE, 50/60 Hz Control voltage: 24 V DC Connected load: 16 kW Weight: 8,000 kg Operating hours Control on: 44,842 h Machine on: 36,513 h Program run: 15,882 h Drives on: 31,655 h Bdsdpfjx Trpqjx Altsd Spindle on: 17,716 h

Condition: ready for operation (used), Year of construction: 1997, operating hours: 1,564 h, functionality: fully functional, machine/vehicle number: 7015, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, controller model: HEIDENHAIN TNC 426, spindle speed (max.): 24,000 rpm, TECHNICAL DETAILS Travel X-axis: 1,000 mm Travel Y-axis: 750 mm Travel Z-axis: 750 mm Number of Axes: 4 Bdodpfx Aljyhnxcetjd Distance between vertical spindle and table: 115 mm Max. spindle speed: 24,000 rpm Feed rate: 1,500 mm/min Rapid traverse: 22 m/min Table length: 1,150 mm Table width: 700 mm Turret stations: 60 Tool changer type: TC 30 Number of tools: 30 Tool diameter: 77 mm Diameter with adjacent empty stations: 115 mm Max. tool length: 305 mm Tool holder: HSK A63 MACHINE DETAILS Control: HEIDENHAIN TNC 426 Connection: 50 Hz 3x 400 V Total power requirement: 40 kW Dimensions & Weight Dimensions (L x W x H): 5,220 x 3,100 x 2,840 mm Machine weight: approx. 10,500 kg Operating Hours Power-on time: 21,859 hours Operating time: 7,308 hours Spindle running time: 1,564 hours EQUIPMENT Through-spindle coolant (IKZ) Chip conveyor Rotary table, 4th axis Set of tool holders, 45 pieces Tool cabinet LISTA

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, total height: 2,720 mm, total length: 3,160 mm, total width: 2,240 mm, For sale: 3-axis CNC milling machine, Mikron VCE 600 Pro The machine is in excellent condition and ready for immediate use. Technical data: Year of manufacture: 2012 Control: Heidenhain ITNC 530 Operating hours: 22,840 Spindle hours: 10,902 X-axis travel: 600 mm Y-axis travel: 500 mm Z-axis travel: 540 mm Max. spindle speed: 10,000 rpm Tool holder: SK40 Tool magazine: Clamping surface: 700 x 500 mm Dimensions: 3,160 x 2,240 x 2,720 mm Weight: 4,800 kg Included in the offer: Chip conveyor, interior extraction, through-spindle coolant system, handwheel control, coolant gun, 3D probe, Renishaw tool measurement system Not included: Clamping devices, tool holders Transport and loading can be organised across Europe at additional cost upon request. Prices are quoted net plus VAT. Bsdpfx Ajxnprvjltjdd Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sale BUY / SELL PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact details, please visit our website.

Condition: good (used), Year of construction: 1997, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, For sale is a machining center from Mikron, model UM 600. The machine is in good condition and immediately ready for operation. Technical data: Year of manufacture: 1997 Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Clamping surface: 900 x 530 mm Max. table load: 300 kg Control: Heidenhain TNC 426 Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No tool changer installed; instead, a support arm for conversion of the milling head is mounted (see picture 4). Setup dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Transport and loading can be organized upon request at an additional charge, Europe-wide. Prices plus VAT. Inspection by appointment possible. Please contact us – our team is happy to assist you. Bdjdpfx Aswx Naqjltjd Trade-in or exchange possible! Machinery purchase/sale BUYING AND SELLING OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell yours? For further information or contact options, please visit our website.

Condition: excellent (used), Mikron Gear Hobbing Machine A33/0 – for Module 0.5 to 2.5 – rarely used Manufacturer: Mikron Model: A33/0 – Gear Hobbing Machine (vertical) Version: Base machine with standard milling head Condition: used, very good condition, machine has been rarely operated Color: green Technical Data Max. workpiece diameter: approx. 80 mm Max. hobbing length: approx. 150 mm Module range: approx. 0.5 – 2.5 Ideal for small gears in the module range 0.5 – 1.0 Main drive: 3 kW Electrical connection: 3 x 380 V AC, 50 Hz Total power consumption: approx. 9.5 kVA Dimensions & Weight L x W x H: approx. 1,450 x 1,380 x 2,080 mm Weight: approx. 2,200 kg Special Features Very well-suited for manufacturing small gears (module 0.5 – 1.0) Bdjdpfx Aljx A D Izstsd Machine was rarely used in production, therefore minimal wear Availability / Service Detailed photos and operating video available upon request Quotation including price, delivery terms, and lead time possible Subject to prior sale and errors.

Condition: good (used), Year of construction: 1996, travel distance X-axis: 710 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 5 rpm, For sale: Mikron UMS 710-900 machining center The machine is in good condition. New ball screw drives for X and Y axes, new cover for Z axis, and new Z-axis spiral. Technical data: x-travel: 710 mm y-travel: 630 mm z-travel: 500 mm CNC control: HEIDENHAIN TNC 426 Table size: 1200 x 600 mm Max. table load: 500 kg Spindle mount: SK 40 with ring groove Spindle speed range: 5 – 5,000 rpm Spindle drive power: 11 kW Feed rate range: 0 – 10,000 mm/min Rapid traverse: 10 m/min Operating voltage: 400 V Total connected load: 15 kW Machine weight approx.: 5.0 t Floor space required approx.: 2.40 x 3.40 x 2.30 m Chip tray Bdodstt Acgjpfx Altsd No internal coolant supply (IKZ) 44-position tool changer Handwheel Initial filling with operating fluids for the machine available on request. Loading and transport can be organized throughout Europe for an additional charge. All prices plus VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase & sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES, AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell your equipment? For further information or contact options...